pump curve and specifications - Genemco, Inc.
pump curve and specifications - Genemco, Inc.
pump curve and specifications - Genemco, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
®<br />
®<br />
Quality System<br />
ISO9001 Certified<br />
Environmental<br />
Management System<br />
ISO14001 Certified<br />
BALL VALVE<br />
PB 3 / 4-A Type 3<br />
Air-Powered<br />
Double-Diaphragm<br />
Pump<br />
ENGINEERING, PERFORMANCE<br />
& CONSTRUCTION DATA<br />
INTAKE/DISCHARGE PIPE SIZE CAPACITY AIR VALVE SOLIDS-HANDLING HEADS UP TO<br />
3<br />
/4" NPT(F) (19mm)<br />
1 1 /2" NPT(M) (38mm)<br />
0 to 25 gallons per minute<br />
(0 to 95 liters per minute)<br />
No-lube, no-stall<br />
design.<br />
PERFORMANCE CURVES<br />
(S<strong>and</strong>PIPER ® <strong>pump</strong>s are designed to be powered only by compressed air)<br />
Temperature Limit: PVDF ............ +10°F (-13°C) min.<br />
............ +200°F (+93°C) max.<br />
Polypropylene ............ +40°F (+5°C) min.<br />
............ +150°F (+65°C) max.<br />
1<br />
/16" (2mm) 100 psi or 230 ft. of water<br />
(7 Kg/cm2 or 70 meters)<br />
S<strong>and</strong>PIPER ® Model PB¾-A<br />
Performance based on water<br />
at ambient temperature.<br />
Average displacement per<br />
<strong>pump</strong> stroke: .03 gallon.<br />
S<strong>and</strong>PIPER¨ Model PB¾-A<br />
Performance based on water<br />
at ambient temperature.<br />
Average displacement per<br />
<strong>pump</strong> stroke: .11 liter.<br />
MATERIALS OF CONSTRUCTION<br />
PB 3 /4-A<br />
Type<br />
Manifold<br />
Outer<br />
Chamber<br />
Outer<br />
Diaphragm<br />
Plate<br />
Inner<br />
Diaphragm<br />
Plate<br />
Intermediate<br />
Housing<br />
Diaphragm<br />
Rod<br />
Valve<br />
Seat<br />
*<br />
Hardware<br />
Diaphragm<br />
Ball Valve<br />
Material<br />
Air Valve<br />
Body<br />
Air Valve<br />
Cap<br />
Shipping<br />
Weight<br />
(lbs)<br />
TR-3-K K K K 6061-T6AL PP* 416SS K 301/302SS H H PP* PP* 16<br />
TC-3-K K K K 6061-T6AL PP* 416SS K 301/302SS V T PP* PP* 16<br />
TH-3-K K K K 6061-T6AL PP* 416SS K 301/302SS I T PP* PP* 16<br />
TJ-3-K K K K 6061-T6AL PP* 416SS K 301/302SS B T PP* PP* 16<br />
TM-3-K K K K 6061-T6AL PP* 416SS K 301/302SS N T PP* PP* 16<br />
TS-3-K K K K 6061-T6AL PP* 416SS K 301/302SS S S PP* PP* 16<br />
TGN-3-K K K K 6061-T6AL PP* 416SS K 301/302SS N/T T PP* PP* 16<br />
TGR-3-K K K K 6061-T6AL PP* 416SS K 301/302SS H/T T PP* PP* 16<br />
TR-3-PP PP PP PP 6061-T6AL PP* 416SS PP 301/302SS H H PP* PP* 13<br />
TC-3-PP PP PP PP 6061-T6AL PP* 416SS PP 301/302SS V T PP* PP* 13<br />
TH-3-PP PP PP PP 6061-T6AL PP* 416SS PP 301/302SS I T PP* PP* 13<br />
TJ-3-PP PP PP PP 6061-T6AL PP* 416SS PP 301/302SS B T PP* PP* 13<br />
TM-3-PP PP PP PP 6061-T6AL PP* 416SS PP 301/302SS N T PP* PP* 13<br />
TS-3-PP PP PP PP 6061-T6AL PP* 416SS PP 301/302SS S S PP* PP* 13<br />
TGN-3-PP PP PP PP 6061-T6AL PP* 416SS PP 301/302SS N/T T PP* PP* 13<br />
TGR-3-PP PP PP PP 6061-T6AL PP* 416SS PP 301/302SS H/T T PP* PP* 13<br />
* V-B<strong>and</strong> Hex Nut is Silver Plated Steel<br />
Meanings of<br />
Abbreviations:<br />
PB¾-A 7/01<br />
AL = Aluminum<br />
B = Buna N<br />
H = Hytrel¨<br />
H/T = Hytrel Backup/PTFE Overlay<br />
I = EPDM<br />
K = PVDF<br />
N = Neoprene<br />
N/T = Neoprene Backup/PTFE Overlay<br />
PP = Polypropylene- *Glass Filled<br />
S = Santoprene Ò<br />
T = PTFE<br />
V = Viton ®<br />
PTFE, Hytrel Ò & Viton Ò are registered tradenames of E.I. du Pont. Santoprene Ò is a registered tradename of Monsanto Corp. S<strong>and</strong>PIPER Ò is a registered tradename of Warren Rupp, <strong>Inc</strong>.
PB 3 /4-A BALL VALVE<br />
MATERIALS<br />
BUNA-N General purpose, oil-resistant. Shows good solvent, oil, water <strong>and</strong> hydraulic fluid<br />
resistance. Should not be used with highly polar solvents like acetone <strong>and</strong> MEK, ozone,<br />
chlorinated hydrocarbons <strong>and</strong> nitro hydrocarbons.<br />
EPDM Shows very good water <strong>and</strong> chemical resistance. Has poor resistance to oil <strong>and</strong> solvents,<br />
but is fair in ketones <strong>and</strong> alcohols.<br />
NEOPRENE All purpose. Resistant to vegetable oils. Generally not affected by moderate<br />
chemicals, fats, greases <strong>and</strong> many oils <strong>and</strong> solvents. Generally attacked by strong oxidizing acids,<br />
ketones, esters, nitro hydrocarbons <strong>and</strong> chlorinated aromatic hydrocarbons.<br />
HYTREL ® Good on some acids, bases, amines <strong>and</strong> glycols at room temperature only.<br />
VITON ® Shows good resistance to a wide range of oils <strong>and</strong> solvents; especially all aliphatic,<br />
aromatic <strong>and</strong> halogenated hydrocarbons, acids, animal <strong>and</strong> vegetable oils. Hot water or hot<br />
aqueous solutions (over 70°F) will attack Viton¨ .<br />
PTFE Chemically inert, virtually impervious. Very few chemicals are known to chemically<br />
react with PTFE: molten alkali metals, turbulent liquid or gaseous fluorine <strong>and</strong> a few fluorochemicals<br />
such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at<br />
elevated temperatures.<br />
SANTOPRENE ® Injection molded thermoplastic elastomer with no fabric layer. Long mechanical<br />
flex life. Excellent abrasion resistance.<br />
For specific applications, always consult The Warren Rupp Chemical Resistance Chart<br />
®<br />
Operating Temperatures<br />
Maximum* Minimum* Optimum**<br />
190°F -10°F 50°F to 140°F<br />
88°C -23°C 10°C to 60°C<br />
212°F+ -10°F 50°F to 212°F<br />
100°C+ -23°C 10°C to 100°C<br />
170°F -35°F 50°F to 130°F<br />
77°C -37°C 10°C to 54°C<br />
190°F+ -10°F 50°F to140°F<br />
88°C+ -23°C 10°C to 60°C<br />
212°F+ +32°F 75°F to 212°F<br />
100°C+ 0°C 24°C to 100°C<br />
212°F+ -35°F 50°F to 212°F<br />
100°C+ -37°C 10°C to 100°C<br />
212°F+ -10°F 50°F to 212°F<br />
100°C+ -23°C 10°C to 100°C<br />
*Definite reduction in service life.<br />
**Minimal reduction in service life at ends of range.<br />
Dimensions are ± 1/8"<br />
Figures in parenthesis = millimeters<br />
Dimension A to Air Inlet B Overall Width<br />
St<strong>and</strong>ard Pump 3.5/8" (92) 6.1/4" (159)<br />
Pulse Output Kit 4.1/16" (103) 6.11/16" (170)<br />
Copyright© 2001 Warren Rupp, <strong>Inc</strong>. All rights reserved. Specifications are subject to improvement without notice. S<strong>and</strong>PIPER® is a registered tradename of Warren Rupp, <strong>Inc</strong>.<br />
Warren Rupp, <strong>Inc</strong>. • A Unit of IDEX Corporation • P.O. Box 1568, Mansfield, Ohio 44901-1568 • (419) 524-8388 • Fax (419) 522-7867<br />
PB¾-A 7/01