INSTALLATION MANUAL

More documents

Recommendations

Info

SEE ANCHOR REFERENCE ON PAGE 27 FOR ADDITIONAL SURFACE AND POST MOUNT INFORMATION Step 5 SURFACE MOUNT 20 / 22 / 26 / 30 CONCRETE END FLAP RATCHETS END ARCHES ONLY 4' spacing mount a winch every 3rd arch. 5' spacing mount a winch every other arch. 6' spacing mount a winch every other arch 20 / 26 ALL SURFACES - Install lashing winches to base plates before installing base plate. SEE BELOW* INSTALL END FLAP RATCHETS IF NO ESS END WALL IS INSTALLED SEE BELOW* 7 *END ARCHES ONLY - ONLY if an ESS Steel Frame is to be installed - Install 7/16" x 2 1/2" bolts in base plates BEFORE installing base plate. Q205.1.1
Step 6 POST <strong>INSTALLATION</strong> MAX MAX 8 Q205.1.1
Page 1 and 2: # Q205.1.1 Manual SUPERCEDES - Q205
Page 3 and 4: IMPORTANT - READ MANUAL FIRST Impro
Page 5 and 6: Step 2 REQUIRED EQUIPMENT AND MATER
Page 7: Step 4 BUILDING LAYOUT SERIES 20 (W
Page 11 and 12: 26 / 30 BUILDINGS GO TO STEP 10, PA
Page 13 and 14: Step 9 20 / 22 CONTINUED NO HOLE 12
Page 15 and 16: Step 10 26 / 30 CONTINUED NO HOLE 1
Page 17 and 18: Step 10 26 / 30 CONTINUED ON THE UN
Page 19 and 20: Step 14 INSTALL THE COVER FASTENING
Page 21 and 22: Step 16 INSTALL THE PVC PIPE 1. Onc
Page 23 and 24: Step 20 SECURE THE APRON The fabric
Page 25 and 26: IMPORTANT: Extended buildings requi
Page 27 and 28: CONVERSIONS INCHES MILLIMETERS 1/32
Page 29 and 30: ANCHOR REFERENCE - cont. All anchor
Page 31 and 32: LIMITED WARRANTY QUICKSTRUCTURES QS

INSTALLATION MANUAL

Create successful ePaper yourself

Delete template?

Save as template?