INSTALLATION MANUAL
INSTALLATION MANUAL
INSTALLATION MANUAL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
B - SIDE VENTILATION - for Livestock purposes:<br />
1. 2" x 4" dimensional lumber to use as strapping for outside edging and to mount the<br />
deflector board.<br />
2. Deflector board - strips of plywood or OSB board (chipboard) 8' x 2' wide extending the<br />
full length of the sides of the building. (1/2" thick recommended).<br />
3. 2 3/8" U-bolts or 1/4" self-drilling screws to secure the deflector board.<br />
4. Installation of the side ventilation deflector board to allow proper deflection of air.<br />
a) Fasten a row of 2” x 4” dimensional lumber onto the arches approximately 2’<br />
above the top of the posts. Use U-bolts or 1/4" self-drilling (Tek) bolts. Drill an<br />
oversize hole through the wood to install self-drilling bolts.<br />
b) Fasten 8’ strips of 2’ wide plywood or OSB board to the row of 2” x 4”s and the<br />
top of the inside wall.<br />
Hint:<br />
You may want to screw the deflector board pieces on so that they can be easily<br />
removed in summer for increased ventilation.<br />
25<br />
Q205.1.1