INSTALLATION MANUAL
INSTALLATION MANUAL
INSTALLATION MANUAL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step 10 26 / 30<br />
CONTINUED<br />
ON THE UNDERSIDE OF THE FRAME<br />
Tie the frame together with 2 ropes. Leave<br />
ropes until the cover is completely installed.<br />
Tighten all base<br />
plate bolts.<br />
NOTE: Inspect all frame connections for burrs or rough edges which may have developed<br />
during handling or assembly and file them smooth.<br />
Step 11<br />
INSTALL COVER LASHING WINCHES<br />
POST<br />
1. To install winches measure approximately 24” from<br />
the top of the post and drill an 11/16" hole. Mount the<br />
winch using 5/8” threaded rod, washers and nuts. Drill<br />
through the interior wall if necessary.<br />
2. Mount one cover lashing winch on the outside of each<br />
of the 4 corner posts.<br />
3. 4' post spacing mount a winch on every 3rd post – every 12'.<br />
5' post spacing mount a winch on every other post – every 10'.<br />
6' post spacing mount a winch on every other post – every 12'.<br />
In some cases the last winches installed will be mounted on posts next to the end posts<br />
at one end of the building.<br />
SURFACE<br />
16<br />
Winches must be installed on base before frame erection - see STEP 5 on Page 7.<br />
Q205.1.1
Change language