INSTALLATION MANUAL

More documents

Recommendations

Info

Step 7 POST OPTION #1 - NON-VENTED WALL Minimum 2" x 8" untreated dimensional lumber top mounting plate. 3/8" x 5" lag bolts DO NOT TIGHTEN LAG BOLTS FULLY AT THIS TIME. DRILL HOLES FOR LAG BOLTS TO AVOID SPLITTING. Step 8 POST OPTION #2- VENTED LIVESTOCK WALL 2" x 4" untreated dimensional lumber edging. 3/8" x 5" lag bolts 9 DRILL HOLES FOR LAG BOLTS TO AVOID SPLITTING. DO NOT TIGHTEN LAG BOLTS FULLY AT THIS TIME. Q205.1.1
26 / 30 BUILDINGS GO TO STEP 10, PAGE 13 Step 9 20 / 22 ERECT THE 20/22 STEEL FRAME NOTE: Be sure to inspect all arch pieces for burrs or rough edges which may have developed during handling or assembly and file them smooth. Be sure to wear protective eye-wear during filing. 20 / 22 3 TRUSS TUBES MAKE ONE FULL ARCH NO HOLE 10 Q205.1.1
Page 1 and 2: # Q205.1.1 Manual SUPERCEDES - Q205
Page 3 and 4: IMPORTANT - READ MANUAL FIRST Impro
Page 5 and 6: Step 2 REQUIRED EQUIPMENT AND MATER
Page 7 and 8: Step 4 BUILDING LAYOUT SERIES 20 (W
Page 9: Step 6 POST INSTALLATION MAX MAX 8
Page 13 and 14: Step 9 20 / 22 CONTINUED NO HOLE 12
Page 15 and 16: Step 10 26 / 30 CONTINUED NO HOLE 1
Page 17 and 18: Step 10 26 / 30 CONTINUED ON THE UN
Page 19 and 20: Step 14 INSTALL THE COVER FASTENING
Page 21 and 22: Step 16 INSTALL THE PVC PIPE 1. Onc
Page 23 and 24: Step 20 SECURE THE APRON The fabric
Page 25 and 26: IMPORTANT: Extended buildings requi
Page 27 and 28: CONVERSIONS INCHES MILLIMETERS 1/32
Page 29 and 30: ANCHOR REFERENCE - cont. All anchor
Page 31 and 32: LIMITED WARRANTY QUICKSTRUCTURES QS

INSTALLATION MANUAL

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?