2003 LSSV Operator Manual Supplement (PDF) - GM Fleet
2003 LSSV Operator Manual Supplement (PDF) - GM Fleet
2003 LSSV Operator Manual Supplement (PDF) - GM Fleet
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7. Connect the negative<br />
(-) cable to the negative<br />
(-) terminal of the<br />
12-volt system of the<br />
vehicle with the good<br />
battery.<br />
13898<br />
13897<br />
6. Connect the positive (+) cable to the positive (+)<br />
terminal 12-volt system of the vehicle with the<br />
good battery.<br />
Do not let the other end touch anything until the next step.<br />
The other end of the negative (-) cable does not go to the<br />
dead battery. It goes to a heavy unpainted metal part of the<br />
engine in the vehicle with the dead battery.<br />
8. Attach the cable at least 18 in (45 cm) away from<br />
the dead battery, but not near engine parts that<br />
move. The electrical connection is just as good<br />
there, but the chance of sparks getting back to<br />
the battery is much less.<br />
5-6