HALFEN FRAMING CHANNELS AND ACCESSORIES - G.m.v.
HALFEN FRAMING CHANNELS AND ACCESSORIES - G.m.v.
HALFEN FRAMING CHANNELS AND ACCESSORIES - G.m.v.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>HALFEN</strong> <strong>FRAMING</strong> SYSTEMS<br />
Channel Fixing (Introduction)<br />
1<br />
2<br />
3<br />
Framing Channels, Bolts<br />
Accessories<br />
Design Properties<br />
Adjustable <strong>HALFEN</strong> channel fixing systems<br />
offer a whole range of benefits:<br />
• Non-slip bolting at any point with Halfen T-head bolts.<br />
• Corrosion protection remains intact after bolting.<br />
• Can be adjusted or extended on site without any need for machining (it is<br />
therefore not restricted by different hole settings when changes are made to<br />
components).<br />
• Several different thread diameters can be used in one channel.<br />
• High corrosion protection of structural components through hot-dip galvanising<br />
(piece galvanisation). Alternatively, pre-galvanised versions are available for<br />
lower corrosion protection requirements.<br />
• A large selection of standard channels with excellent load bearing characteristics.<br />
<strong>HALFEN</strong> Framing channels represent support structures and fixing materials<br />
all in one.<br />
4<br />
5<br />
6<br />
7<br />
Notes, Work aid Pipe Clamps, Pipe Supports Cantilevers<br />
Support Structures<br />
- <strong>HALFEN</strong> Quality Management System certified acc.<br />
to DIN EN 9001, Certificate no. QS 281 HH for the<br />
locations in Germany, Switzerland and Poznan /<br />
Poland.<br />
Using <strong>HALFEN</strong> Framing channels<br />
uneconomic procedures are avoided such<br />
as:<br />
- costly machining and corrosion protection<br />
on finished structural units during<br />
retrofitting or on-site adaptation.<br />
- time-consuming hole setting calculations<br />
for structural parts requiring large numbers<br />
of bolts.<br />
- costly manufacture of purpose-made bolted<br />
structures.<br />
e.g. M 12<br />
e = 30 mm<br />
4