High Speed DC Circuit Breaker - G E Power Controls

More documents

Recommendations

Info

3.3 Technical data tables Breaker type Arc chute type 1X2 1X4 2X2 2X3 2X4 1X2 1X4 2X2 2X3 2X4 1X2 1X4 2X2 2X3 2X4 1X2 2X2 Conventional thermal current I th [A] (IEC/EN) Rated current [A] (ANSI) 2600 4150 5000 Rated voltage U e [V] 1000 2000 2000 3000 3600 1000 2000 2000 3000 3600 1000 2000 2000 3000 3600 1000 2000 Rated insulation voltage U i [V] 2000 2000 2000 3000 4000 2000 2000 2000 3000 4000 1000 2000 2000 3000 4000 1000 2000 Short time current 120 min [A] Short time current 2 min [A] Short time current 20 sec [A] Impulse withstand voltage 1,2/50 µs Ui [kV] 18 18 18 30 30 18 18 18 30 30 12 18 18 30 -1) 12 18 according to EN 50124-1:1997 Power frequency withstand voltage 50 Hz Ua [kVeff] 10 10 10 15 15 10 10 10 15 15 7 10 10 15 -1) 7 10 according to EN 50124-1:1997 Rated short circuit making capacity Î Nss [kA] 70 50 100 50 42 70 50 100 50 42 70 50 80 50 -1) 70 - 1) Rated short circuit breaking capacity I Nss [kA] 50 35 71 35 30 50 35 71 35 30 50 35 56 35 -1) 50 50 according to EN 50123-2 Rated service short circuit breaking current Ics [kA] 60 40 50 40 40 60 40 50 40 40 60 40 50 40 -1) 60 - 1) according to IEC 947-2 Short circuit current [kA] at Une=800 VDC 200 200 200 Short circuit current [kA] at Une=1600 VDC -1) 100 -1) -1) ANSI C37.14 Maximum short circuit current [kA] 244 120 100 52 244 120 100 52 200 240 tested at customer request Maximum arc voltage Uarc [kV] 2 4 4 5,6 7 2 4 4 5,6 7 2 4 4 5,6 7 2 4 Weight ca. [kg] 120 120 160 160 160 120 120 160 160 160 150 150 165 165 165 190 210 Weight ca. [lbs] 265 265 352 352 352 265 265 352 352 352 331 331 364 364 364 419 463 Table 1: Technical data of Gerapid 2607, 4207, 6007, 8007. Gerapid 2607 3150 Gerapid 4207 Gerapid 6007 2600 4200 6000 5200 5000 8500 7800 12600 7200 12000 18000 Gerapid 8007 8000 6000 9600 16000 24000 S47183-e 01/2008 Design and specifications are subject to change without notice 12
Control box terminals 1x12-pole AC 400V, 20A 4x15-pole AC 250V, 8A Closing solenoid drive 1) Rated voltage AC 48V…230V and DC 48V…220V Operating range 80%...115% of rated voltage Power consumption Gerapid 2607 / 4207 1750W / 2000W Power consumption Gerapid 6007 / 8007 2600W / 2600W Minimal CLOSING command duration 100ms min.interval between two "CLOSE" operations ~8s with NEKO installed; ~14s w/o NEKO Internal voltage converter 1) Input: Voltage range DC 33...85V for Gerapid 2607, 4207, 6007, 8007 Output: Voltage range DC 24V (±5%) Current 6A permanent Model description PCMD 150 48 S24W-GE Input: Voltage range DC 88...145V Output: Voltage range DC 24V (±5%) Current 6A permanent Model description nr. PCMD 150 110 S24W-GE Input: Voltage range AC 115...290V, DC 125...353V Output: Voltage range DC 24V (±5%) Current 3A permanent, 5A/100ms Model description nr. PCMA 70 S24W-GE External power supply with plug and socket unit requires extrnal 24V (±5%) DC Aux. contact HS 1…HS 10, Rated operational voltage Ue/AC 230V OCT- and Arc chute- indicators Rated operational current Ie/AC-15 1A Rated operational current Ie/AC-12 (Ith) 10A Rated operational voltage Ue/DC 110V Rated operational current Ie/DC-13 0,5A Contact duty (min. value) DC 10V/2 mA ST 1) Rated voltage Uc 24V (Shunt trip) Operating range: OFF 21.6V…26.4V Power consumption ~ 150W UVR 1) Rated voltage Uc 24V (Zero voltage release) Operating range: OFF < 3V Operating range: ON 24V (±10%) Power consumption ~ 40W ED-tripping device 1) Energie source: Capacity 2000µF Charging voltage 300V Switching interval max. 2/min with 10 consecutive operations Endurance 1000 operations with 1operation per 180s Firing signal 2) level / duration 6…24V / 100…1000ms 1) Standard ambient conditions acc. to EN 123-1 Attachement B. For meeting outside of this standard range, please call back. Table 2a: Technical data of auxiliary circuits Components Technical datas of control circuits Us / In SU-Control CLOSE-push-button -S1 DC 24V / approx. 10mA ST releasing push-button-S2 DC 24V / approx. 4A UVR releasing push-button -S2 ( -X2 :6 / :7) DC 24V / approx. 10mA push-button -S2 ( -X2 :8 / :9 ) DC 24V / approx. 450mA ED-coil tripping w/o NEKO (R = 4Ohm) push-button -S3 DC 300V / 750A / 3ms ED-coil tripping with NEKO Connect "Firing signal" at ( -X2 :10 / :11 ) DC 6V…24V / approx.20mA Table 2b: Control circuits ( directional values to rate the components ) S47183-e 01/2008 Design and specifications are subject to change without notice 13
Page 1 and 2: GE Consumer & Industrial Power Prot
Page 3 and 4: 1. Warnings and Safety Hints 1.1 Wa
Page 5 and 6: 2.2 Installation 2.2.1 Operational
Page 7 and 8: 3.2.3 Mechanism • The Gerapid is
Page 9 and 10: With correctly designed interlock i
Page 11: • The sensor includes Hall-probes
Page 15 and 16: 4.2 Terminals wiring system 1 2 3 4
Page 17 and 18: 4.3.2 Voltage converter Voltage con
Page 19 and 20: 4.3.4 NEKO control unit -X16 -X10,
Page 21 and 22: 4.3.6 Shunt trip control unit Emerg
Page 23 and 24: 4.3.8 Indicators -X3 :8 -X3 :12 -X3
Page 25 and 26: 4.3.10 SEL measuring system 1) 2) S
Page 27 and 28: 5.1 Safety distances. Units call in
Page 29 and 30: 5.2.2 Gerapid 2607, 4207, 6007with
Page 31 and 32: 5.2.4 Gerapid 8007 with arc chute 2
Page 33 and 34: 5.2.6 Gerapid 2607, 4207 with V / V
Page 35 and 36: 5.2.8 Gerapid 8007 terminals Gerapi
Page 37 and 38: 6.1.1 General visual inspection •
Page 39 and 40: 6.1.5 Inspection of contacts’ til
Page 41 and 42: D) Install the adapter • [Fig. 48
Page 43 and 44: D) Changing the pre-arcing contact
Page 45 and 46: Fig. 55-4 Unscrew all the plugs fro
Page 47 and 48: 6.3 Spare parts list Component Type
Page 49 and 50: 7.2 Ordering Form. Gerapid with Arc
Page 51 and 52: 7.2.1 Example of order 2. USA custo
Page 53 and 54: 7.4 Troubleshooting. Switching ON i

High Speed DC Circuit Breaker - G E Power Controls

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?