Uninterruptible Power Supplies - G E Power Controls

UPS
Technical specifications
Technical specifications (model dependent)
Output power rating (kVA)
Output power rating (kW)
Dimensions
Weight (without batteries), kg
Input current THD (optional)
Dimensions, hxwxd (mm):
A = 1820x800x800
B = 1820x1200x800
C = 1820x1650x800
Technical specifications (general)
80
72
A
605
< 6%
* preliminary
Input voltage range
320-460 Vac
Input frequency range
45-65 Hz
Output voltage
3x380/400/415 Vac (user selectable)
Output frequency
50 or 60 Hz ± 0.01% (user selectable)
Output power factor 0.9
Output voltage THD at linear load < 1%
Output voltage THD at non-linear load < 3%
Overload capability on inverter
125% 10 min., 150% 1 min.
Output voltage regulation - static < ± 1%
Output voltage regulation - dynamic (100% step load)
< ± 2% (recovery time < 20 ms)
System efficiency
98% on super ECO mode
Protection degree IP 20
Ambient operating temperature 0 to 40°C
Relative humidity
95% non-condensing
Interfacing
std: RS232; potential free contacts, programmable relays
Battery extension
optional
Backfeed protection
standard available
Software compatibility
JUMP DataShield, JUMP Manager, IRIS
100
90
B
830
< 6%
120
108
B
830
< 6%
160
144
C
1100*
< 5%
200
180
C
1300*
< 5%
SG Series - double conversion
A
B
X
Runtime table 80-120 kVA (1) (100% load, minutes)
SG Series model 80 kVA 100 kVA 120 kVA
Capacity of battery set (V/Ah)
360 / 1x75 6
(2) (2)
360 / 1x82 11 8 5
360 / 2x92 33
(2) (2)
360 / 1x130
(2)
15 10
360 / 2x130 47
(2)
30
360 / 3x110 63 48
(2)
360 / 3x130
(2)
61 46
(1) For the full SG Series range (80-200 kVA) runtimes are possible from 5 minutes up to 3-4 hours.
Contact your dealer for customised battery solutions not mentioned in this catalogue.
(2) This combination of battery set / UPS model is not available.
B.27