Uninterruptible Power Supplies - G E Power Controls

UPS
LP 33 10-30 Series - double conversion UPS
Applications
The on-line LP UPS Series is designed for a range of mission-critical
applications. The LP UPS is easy to install and service, optimised for the
office environment. The robust design allows for more traditional industrial
applications.
Order codes
A
B
X
Function
Providing exceptionally reliable
protection for electrical equipment
Standards / Marking
Safety: EN 50091; IEC 62040
Protection: IEC60529
EMC: EN 50091-2 (Class A)
Characteristics
The LP 33 UPS is a 3-phase in / 3-phase out, true VFI (Voltage & Frequency
Independent) on-line double conversion, intelligent and heavy duty UPS. The
VFI design concept enables the highest level of protection even under the
toughest conditions.
The system power and reliability can be easily expanded by adding units,
creating a redundant system with no single points of failure, utilizing GE’s
unique Redundant Parallel Architecture (RPA) technology.
Technical specifications (general)
Input voltage range
324-478 Vac
Input frequency range
45-65 Hz
Output voltage
380/400/415 Vac ± 1% (user selectable)
Output frequency
50 or 60 Hz, front selectable
Environment IP 20 (IEC 60529)
Ambient operating temperature 0 to 40°C
Relative humidity
95% non-condensing
Audible noise
40-55 dB(A), load and temperature dependent
Interfacing
std: RS232; potential free contacts, SNMP
Standard features
SBM Superior Battery Management
Battery extension
optional
Backfeed protection
standard available
Software compatibility
JUMP DataShield, JUMP Manager, IRIS
Runtime table (minutes) (1)
LP 33 UPS model 10-33 20-33 30-33
at typical UPS load (75%) 15 15 15
VA/Watts 3000 / 2400 48 90 130
5000 / 4000 27 57 80
8000 / 6400 14 35 53
10000 / 8000 10 27 42
15000 / 12000 - 15 28
20000 / 16000 - 10 21
30000 / 24000 - - 10
(1) with battery: 7Ah 14Ah 21Ah
B.14