You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REMOVAL OF THE TEMPORARY<br />
RESTORATION AND CLEANING<br />
Remove temporary restoration, sealing material or cement. Clean cavity. Rinse and<br />
dry cavity thoroughly.<br />
<strong>GC</strong> METALPRIMER II<br />
CLEANING AND TREATMENT<br />
OF THE RESTORATION<br />
FOR BONDING<br />
■ Internal Metal bonding surface<br />
Sandblast the metal surface with aluminum oxide (+/- 50 microns) and apply a<br />
thin layer of <strong>GC</strong> METALPRIMER II. After applying the primer, carefully avoid<br />
contaminating the metal surface before cementing the restoration.<br />
Precaution: Apply one or two thin coats of <strong>GC</strong> METALPRIMER II. A too thick coat<br />
can reduce adhesive strength.<br />
■ <strong>GC</strong> <strong>GRADIA</strong> internal bonding surface (metal free restorations)<br />
Apply thin layer of <strong>GC</strong> COMPOSITE PRIMER to internal bonding surface then light<br />
cure with conventional operatory curing light for 20 sec.<br />
When using LABOLIGHT LV-II/LV-III, light-cure for one minute.<br />
<strong>GC</strong> COMPOSITE<br />
PRIMER<br />
<strong>GC</strong> LABOLIGHT LV-II / LV-III<br />
CEMENTATION<br />
Cement with <strong>GC</strong> FUJI PLUS or comparable dental cement per<br />
manufacturer’s instructions.<br />
<strong>GC</strong> FUJI PLUS<br />
ADJUSTING & POLISHING<br />
OCCLUSAL SURFACE<br />
Adjust occlusal surface with diamond or carborundum point then use silicone<br />
points. Finally, add <strong>GC</strong> <strong>GRADIA</strong> DIAPOLISHER to felt or chamois wheel and buff<br />
to a lustrous finish.<br />
<strong>GC</strong> <strong>GRADIA</strong> DIAPOLISHER<br />
11