PRoduct catalog - Rev's Engineering

PRoduct 

Catalog 

EFI SYSTEMS 

EFI COMPONENTS 

Intake manifolds 

Throttle bodies 

Electronic Controllers 

AIR/FUEL METERS 

Carb Accessories 

WWW.FUELAIRSPARK.COM

Hot Products 

EZ-EFI 

Self Tuning Fuel Injection System 

Page 02 

Page 25 

Dual Sensor 

Air/Fuel Meters 

LSX R & LSX RT 

 

102mm Intake Manifolds 

Page 18-19 

Page 04 

XFI Fuel Injection System 

TECHNICAL ASSISTANCE is available through a variety of sources: 

Toll Free EFI HELP : 1.877.334.8355 

Website: www.fuelairspark.com 

Email: tech@fuelairspark.com 

24 Hour Fax: 901.366.1807 

Technical and Sales Personnel are available from 8:00 a.m. to 5:00 p.m. CST, 

Monday through Friday. FAST is closed on weekends and legal holidays.

Table of Contents 

Electronic Fuel Injection 

EZ-EFI Self Tuning Electronic Fuel Injection System............... 02 

XFI Electronic Fuel Injection Systems....................................... 04 

XFI Engine Control Units............................................................. 06 

XFI Upgrade Options................................................................... 06 

XFI Main Harnesses..................................................................... 06 

XFI Fuel Injector Harnesses........................................................ 06 

XFI Ignition Adapter Harnesses & Connector Kits................... 07 

XFI Optional Harnesses & Connector Kits................................ 07 

XFI Accessories........................................................................... 07 

Fuel Injection System Installation DVD....................................... 07 

XFI Electronic Fuel Injection Kits............................................... 08 

EFI Crate/Transplant Engine Management Kits.......................... 08 

About FAST 

In 2001 FAST was acquired by the COMP Performance Group and 

turned into the electronics company that we know today. After more 

than a decade in the performance aftermarket industry, FAST is the 

recognized leader in advanced EFI technology and has the components 

to adapt virtually any engine to fuel injection. With the latest in easy-touse 

EFI performance parts, the experts at FAST have everything that 

you need to make high-tech horsepower. 

EFI Components 

XFI Touch Screen Dash/Data Logger......................................... 09 

XFI EGT Module........................................................................... 10 

XFI Accelerometer........................................................................ 10 

Crank Triggers................................................................................ 10 

Dual-Sync Distributors...................................................................11 

XIM Ignition Module......................................................................11 

Precision-Flow Fuel Injectors..................................................... 12 

Fuel Injector Harnesses & Adapter Kits....................................... 13 

Sensors & Sensor Kits.................................................................. 14 

Pressure Sensors.......................................................................... 16 

Fuel Injector Bungs........................................................................ 16 

Universal Fuel Rails....................................................................... 16 

Intake Manifolds & Throttle Bodies 

LSX 92mm Intake Manifold......................................................... 17 

Big Mouth Throttle Bodies .......................................................... 17 

LSX RT 

 

102mm Intake Manifold..................................................... 18 

LSX R 

 

102mm Intake Manifold...................................................... 19 

LSX Intake Manifold Diagram..................................................... 20 

LSX / LSX R / LSX RT 

 

Fuel Rails................................................... 21 


 

Seals & Hardware...................................... 21 


 

Fuel System Accessories......................... 21 

4 Barrel Throttle Bodies................................................................ 22 

Single Plane Intake Manifolds & Fuel Rail Kits........................... 22 

Fuel Systems 

Complete Fuel System Kits........................................................... 23 

Fuel Fittings & Accessories.......................................................... 24 

Fuel Pressure Regulators............................................................. 24 

Air/Fuel Meters 

Wide-Band Digital Air/Fuel Meters............................................... 25 

Replacement Accessories............................................................. 25 

Digital Air/Fuel Meter RPM Module............................................... 26 

Air/Fuel Ratio Module Kits............................................................ 26 

Digital Air/Fuel Meter Interior Mount Kit...................................... 26 

Wide-Band Air/Fuel Gauge Kit...................................................... 26 

EZ Clamp-On Tailpipe Wide-Band Sensor Mount Kit................. 26 

The FAST website, www.fuelairspark.com, offers the quickest way to 

find out more about FAST fuel injection systems. All of the important 

website basics are there, including contact information, detailed warranty 

guidelines and the ability to shop from the FAST online store. 

Resources: 

Frequently Asked Questions ....................... 31 

Glossary of Terms ....................................... 32 

Warranty ..................................................... 33 

Electronic Transmission Controller................................ 27 

FAST-FLASH Power Programmers............................... 28 

Carburetion 

Vibration Absorber Carb Spacers................................................ 28 

MaxJet Precision Carb Jets........................................................ 29 

Air Flow Enhancement.................................................................. 30 

Terminal Tools & Merchandise......................................... 30 

01

EZ-EFI ® Self Tuning Fuel Injection System 

® 

No tuning experience 

or laptop required for 

self tuning system 

Part #30226-Kit 

* Patent Pending 

Seriously Easy. 

FAST engineers set out to develop the ultimate fueling strategy for the 

EZ-EFI ® . The EZ-EFI ® features patent pending technology with the most advanced 

self tuning control strategy available anywhere today. Simply hook 

up the necessary wires, answer the basic setup Wizard questions on the included 

hand-held display and the system tunes itself as you drive. Countless 

research and development hours were spent on a number of prototype test 

vehicles to develop a high-quality system truly worthy of the FAST brand. 

Capable of supporting up to 600 horsepower engines at 60psi, the FAST 

EZ-EFI ® Self Tuning Fuel Injection System can be purchased as a complete 

system, including the ECU, wide-band oxygen sensor, wiring harness, fuel 

injectors, optional fuel pump kit and other assorted components, including 

the innovative 4150 Throttle Body from FAST . 

The FAST 4150 Throttle Body delivers the total package approach for 

anyone with an existing 4150-type intake manifold. Everything comes 

with the kit, including appropriate fuel injectors and fuel rails. In addition, 

it works with the original carb-style throttle linkage & is ready to accept 

all OEM sensors. 

• Easy-to-use setup Wizard provides comprehensive walk-through and system tunes itself 

• System includes ECU, wide-band oxygen sensor, wiring harness, fuel injectors, fuel 

pump kit and throttle body 

• Bolts on to ANY engine up to 600 hp; ideal for street rods and muscle cars 

EZ-EFI ® Self Tuning Fuel Injection 

System w/o Fuel Pump Kit 

#30226-Kit 

EZ-EFI ® Self Tuning Fuel Injection 

System Master Kit w/ Fuel Pump #30227-Kit 

Kit, Hose & Fitting Kit 

Multiport Retro-Fit EZ-EFI ® Kit #302000 1 

600 HP Fuel Pump Kit, EZ Only #307503 

25 Ft. Hose & Fitting Kit #307600 2 

Dual Quad Upgrade Kit #304155 

Dual Quad Throttle Linkage Kit #304110 

Complete Throttle Body Assembly #304150 

Replacement Bosch LSU 

O 2 Sensor For EZ-EFI ® #170408 

Vehicle Mount Kit 

For Handheld Unit 

#170493 

1 

Does not include throttle body assembly 

or injectors 

2 

Longer cables available on page 7 

02

www.fuelairspark.com 

ECU 

• Self-learning and tuning system; system will start, idle, run, and 

drive with only a few simple questions answered in the handheld’s 

Wizard and one throttle blade adjustment 

• No software necessary 

• Has the capability to drive up to eight high-impedance fuel injectors 

in a bank-to-bank configuration 

• True Speed Density fuel injection system 

• Utilizes the Bosch LSU 4.2 wide-band O 2 sensor for closed loop control 

of the engine’s air/fuel ratios 

• Includes built-in diagnostics feature for easy troubleshooting 

• Features include: control of electric fuel pump, electric cooling fan 

and A/C sense line to raise idle rpm when A/C is turned on 

• Watertight, high luster enclosure suitable for many applications, 

including marine, off-road & buggy applications 

Handheld Unit 

• Provides the only necessary interface to the ECU 

• Has a set-up Wizard to guide you through startup and setup 

• Screens for viewing engine’s live running data (i.e. scan tool) 

• Includes advanced tuner area where fuel for different areas can be 

adjusted or fine tuned for fuel economy and best power 

Basic EZ-EFI ® Startup 

1. Open throttle blades a small amount to allow engine to idle. 

Advanced intelligent self tune strategy, developed over two 

years of R&D, actually tunes engine MAPs while you drive. 

Throttle Body 

• Direct bolt-on carburetor replacement, including a Holley-style 

throttle linkage and 4150 square flange intake bolt pattern 

• Air temperature, throttle position sensor, idle air motor & manifold 

pressure sensor are located on throttle body housing 

• Advanced dyno-based development ensures proper fuel distribution 

in both single & dual plane manifolds 

• Includes injectors & fuel rails supporting up to 550 horsepower 

• Constructed from lightweight aluminum 

2. Turn key to on position, and allow injectors to prime the 

manifold with fuel. 

3. Answer a few simple questions on the handheld unit such as: 

What rpm do you want to idle at? What size is your engine? 

4. Start car & adjust throttle blade to allow car to idle. 

5. As vehicle warms up, the handheld unit will tell you when & 

how to adjust the throttle blades to the appropriate spot via 

an easy-to-read on-screen meter. 

6. That’s it! It will learn and adjust the idle and cruise as you 

drive and will learn wide-open throttle after a few passes 

through the rpm band. 

“The EZ-EFI fixed everything 

that frustrated me about my 

carburetor. I would recommend 

this to anybody who 

wants to make the switch.” 

- Corey Runia 

1968 Camaro RS, 350/4 speed

XFI Electronic Fuel Injection Systems 

Here’s the one electronic fuel injection system with truly revolutionary features and capabilities 

in an easy-to-use package. The FAST XFI system precisely balances fuel and spark, allowing 

you to fine tune like never before. The XFI system comes with easy-to-navigate software that’s 

completely configurable and allows you to set the parameters. Faster processing means no more 

flat spots in the power curve or settling for “close enough.” XFI is compatible with all common 

ignition types, including GM HEI, LT1, LS1, -2, -6, -7 DIS, Ford EDIS (4.6L & 5.4L), and Chrysler 5.7L, 

6.1L Hemi applications. 

Hardware Improvements 

The XFI uses the latest in flash microprocessor technology to deliver a significant increase in processing 

speed. This means the XFI can process, analyze and adjust four times faster than previous EFI 

systems. In addition, a surface mount component circuit board and billet ECU enclosure give the XFI 

superior durability. And to simplify installation, FAST offers engine-specific XFI Wiring Harnesses 

featuring clearly labeled connections. 

Software Advances 

The C-Com XFI Windows-based software is easy to navigate and incorporates several previously unavailable 

features, such as field flashable capabilities that enable you to download the latest software 

updates via email or directly from the FAST website. Stay current without ever removing the XFI from 

your vehicle. 

Special Features 

The XFI features Qwik Tune Technology, which allows ECU programming without a laptop. Preprogram 

up to four different EFI MAPs, and select the tune-up you need with the flick of an in-car switch. 

Optimize one setting for everyday driving, others for racing conditions and still another for improved fuel 

economy. Other features include on-board diagnostics, EZ Test Indicator Lights, five bar MAP sensing 

and controls for your power adder and torque converter. The XFI also offers enhanced data logging 

capabilities and memory for analyzing up to 8 additional monitored inputs. 

Easy-to-navigate C-Com XFI software 

contains the advanced features demanded by 

professionals, yet allows first-time EFI users 

to tune with confidence. 

Standard Features Include: 

Built-in wide-band O 2 • Fully sequential and/or bank-to-bank capability • Individual cylinder correction 

• Fan and fuel pump control • Dynamic scaling of vectors in 2D & 3D tables • Scalable TPS, air temp, 

water temp and MAP calibrations • 1, 2, 3 and 5 bar MAP capability • Spare user definable inputs/outputs 

for miscellaneous functions, such as shift light output, auxiliary fan control and EGT monitoring • 

Torque converter lockup control • Air conditioning wide-open throttle cutout • Boost control • Enhanced 

4 stage power adder controls • Multiple calibration stored in ECU w/ switching capability • L-key function 

for easy steady-state table correction using wide-band O 2 • On-board diagnostics • Fuel and oil 

pressure logging • Adjustable injector timing • Multiple ignition strategies, such as HEI, DIS, TFI, Ford 

EDIS, IPU (inductive or discreet/hall effect) 

Download C-Com XFI 

FREE 

@ www.fuelairspark.com 

04

EFI HELP 1.877.334.8355 

Optional System Upgrades 

Internal Data Logging (IDL) 

FAST offers an internal memory-based data logging option to give comprehensive data from 

all of your vehicle’s sensors and powertrain controllers. Available as a downloadable add-on for 

existing XFI owners or as an option with new XFI orders, Internal Data Logging allows recording 

of up to 24 input channels and sensors to instantly assemble a comprehensive, real-time picture 

of exactly what is going on under the hood of your vehicle. Internal Data Logging doesn’t require 

additional wiring harnesses or hardware and is an affordable option compared to purchasing an 

external data logger. Internal Data Logging is available with new XFI purchases, with or without 

Intelligent Traction Control , and in 8 or 16 injector versions. 

Intelligent Traction Control (ITC) 1 

One of the toughest challenges for drag racers is the loss of traction that comes from trying to put 

too much engine power to the ground with too little tire. The FAST Intelligent Traction Control 

solves that problem by using state-of-the art predictive software in conjunction with the most sophisticated 

electronics in the industry. Available with or without Internal Data Logging and 8 or 

16 injector versions, you can even send in your existing XFI unit and upgrade to a new one with 

Intelligent Traction Control . 

16 Injector Option 

The 16 injector option is available for already existing XFI units by sending in your engine control 

unit and also for brand new XFI purchases. This upgrades the XFI injector drivers to operate up 

to 16 injectors and includes the injector Y adapter. 

1 

Intelligent Traction Control is not legal in all sanctioning bodies/classes; check your 

rules before using. 

How To Order Your 

XFI Fuel Injection System: 

1. Choose the ECU & optional features – ITC, IDL, etc 

Part # 

(Page 06) 

2. Select the main harness 

Part # 

(Page 06) 

3. Select the fuel injector harness 

Part # 

(Page 06) 

4. Select the ignition adapter harness 

Part # 

(Page 07) 

5. Select sensors if required – coolant temp, air 

temp, MAP, TPS, IAC 

Part # 

6. Select fuel injectors if required 

Part # 

7. Select fuel system if required 

Part # 

(Page 15) 

(Page 12) 

(Page 23) 

Andy Jensen Pro Mod Camaro 

1968 Tim McAmis Camaro, 427 SBC, COMP Cams ® valve train, 

FAST XFI Fuel Injection. Jensen set a world record of 3.99 

seconds @ 184+ mph and was the first turbo car to ever qualify 

for an ADRL pro category. 

05

XFI Electronic Fuel Injection Systems Cont. 

XFI ECU (Engine Control Unit) 

XFI ECU w/ NTK 0 2 #301000 

XFI ECU w/ NTK 0 2 

(For 16 Injectors Including Fuel Injector Y Adapter) 

#301001 

XFI ECU w/ Internal Data Logging #301003 

XFI ECU w/ Internal Data Logging 


#301004 

XFI ECU w/ Intelligent Traction Control #301005 

XFI ECU w/ Intelligent Traction Control #301006 



#301007 

& Intelligent Traction Control 


& Intelligent Traction Control #301008 


Upgrade Options 

(Available as a conversion service to existing XFI units) 

Internal Data Logging Option #301423 

Intelligent Traction Control Option #308027 

16 Injector Option #308028 

XFI Main Harnesses 

GM TPI #301100 

GM LT1/Carb Conversion #301101 

GM LS1, -2, -6, -7 #301108 

Chrysler 5.7L, 6.1L Hemi #301104 

Universal (Flying Lead Harness w/ Weatherpack Connectors) #301105 

Rear Engine Dragster/Boat #301106 

ECU Main Connector Kit (Connectors Only, No Wires) #301000K 

XFI Fuel Injector Harnesses 

SBC, BBC, LT1 18436572 Minitimer #301200 

Small/Big Block Chevy W/ 4/7 Swap Cam 18736542 Minitimer #301201 

GM Gen III LS1, LS6 18726543 Minitimer #301202 

GM Gen III LS2, LS3, LS7 18726543 USCAR #301209 

Ford 4.6L, 5.0L, 5.4L, 5.8L 13726548 Minitimer #301203 

Ford 289, 302, FE, 429, 4 60 15426378 Minitimer #301204 

Chrysler (Except 5.7L, 6.1L) 18436572 Minitimer #301200 

Chrysler 5.7, 6.1L Hemi 18436572 USCAR #301208 

Y Adapter For Multiple Injector Applications NA NA #301205 

Buick V6 165432 Minitimer #301206 

4 Cylinder (Partially Completed Harness) User Determined Minitimer #301207 

06 

Firing Order 

Injector Type 

Connector 

*see pg. 13 for details


XFI Ignition Adapter Harnesses & Connector Kits 

(Connector Kits Consist Of Connectors, Terminals & Seals Only – No Wires) 

These adapters allow a common ECU and main harness to adapt to a wide variety of ignition strategies 

Kits 

IPU #301300 #301300K 

Hall Effect #301301 #301301K 

Buick V6 (Early) #301307 NA 

GM HEI #301302 #301302K 

GM LT1 (Long Connector) #301304 NA 

GM Gen III (LS1, LS6, Includes XIM ) #301311 #301311K 

GM Gen III (LS2, LS7, Includes XIM ) #301312 #301311K 

1 

Must use part #30256-1. 

2 

Also available in packages of (8). Simply change “-1” to “-8”. 

Kits 

Ford 4.6, 5.4L Modular 

Coil-On-Plug (Includes XIM ) 

#301313 NA 

Ford 4.6, 5.4L Modular Coil-On-Plug 

(Includes XIM ) Alternate Coil Option 

#301313A 1 NA 

Ford TFI #301308 NA 

GM Gen III/Gen IV L92 Truck Style Coil #30256-1 2 NA 

Chrysler 5.7L Hemi (Includes XIM ) #301316 #301316K 

Chrysler 6.1L Hemi (Includes XIM ) #301314 #301314K 

Universal Coil-On-Plug (Includes XIM ) #301315 #301315K 

XFI Optional Harnesses & Connector Kits 

(Connector Kits Consist Of Connectors, Terminals & Seals Only – No Wires) 

Kits 

Power Adder #301400 #301400K 

Flash Kit #301401 #301401K 

Analog Input Kit #301402 #301402K 

VSS & Auxiliary Shaft Kit #301403 #301403K 

Switching Outputs 

(Terminated To Push Into Connector Directly) 

#301404 NA 

EGT Kit (Includes Module, Harness, 

Fittings & 8 Thermocouples) 

#301405 NA 

Fan And Fuel Pump Kit #301406 #301406K 

Fuel/Oil Pressure Sending Unit Kit #301407 #301407K 

Single Pressure Sending Unit Kit NA #301408K 

Qwik Tune Calibration Selector Switch Kit #301409 NA 

CAN Retro-Fit Kit #301412 #301412K 

CAN Interconnect Cable #301413 NA 

CAN Terminating Resistor Set #301414 NA 

LS2, LS7 Cam Pickup Adapter Harness #301415 NA 

LS2, LS7 Crank Pickup Adapter Harness #301416 NA 

Dash/Data Logger (See Page 9) #301417 NA 

EGT Module (See Page 10) #301418 NA 

Accelerometer Module (See Page 10) #301419 NA 

Kits 

Single Pressure Sensor Kit 

0-100PSI (w/ Harness) 

#301408 NA 



#301420 NA 



#301421 NA 

Driveshaft Speed Sensor Kit - 2.1875 #301436 NA 

Driveshaft Speed Sensor Kit - 1.875 #301437 NA 

Replacement Speed Sensor Loop #301438 NA 

Replacement Speed Sensor Trigger Magnet #301439 NA 

XFI 3 Port Boost Control Solenoid #301440 NA 

Crank Trigger Harness #307045 NA 

2 Pin Cam Trigger Harness #307046 NA 

XFI Accessories 

5 Ft. PC To ECU Cable #308019 

25 Ft. PC To ECU Cable #308014 

40 ft. PC To ECU Cable #308021 

USB To Serial Converter Cable #307044 

#308019 

#301300 

#30256-1 

Fuel Injection System 

Installation DVD 

The installation and tuning DVD from FAST 

makes the installation of any XFI Fuel Injection 

System a breeze. This step-by-step video takes 

the mystery and worry out of installing your XFI 

system and features detailed interactive animation 

and graphics that actively demonstrate important 

technical information. As an extra bonus, 

it also provides an overview of the operation of 

EFI system technology. Get your copy today. 

“Taking The Mystery & Intimidation Out Of EFI” 

Fuel Injection System Installation DVD 

#307061 

07

XFI Electronic Fuel Injection Kits 

FAST now offers bolt-on XFI kits to install fully sequential EFI on Small and Big 

Block Chevy and Small Block Ford engines from mild street rods to 1,000 hp all-out 

race cars. XFI Fuel Injection Kits include carefully matched components, including the 

XFI , Dual-Sync Distributor, a single plane aluminum intake manifold, 4 barrel throttle 

body, proper size Precision-Flow Fuel Injectors, aluminum fuel rails, fuel pump kit, all 

necessary sensors, professional quality wiring harnesses with labeled connectors and 

the FAST EFI Installation & Tuning DVD. 

XFI Fuel Injection Kit – SBC Up To 550 HP #3012350-05 

XFI Fuel Injection Kit – SBC Up To 1,000 HP #3012350-10 

XFI Fuel Injection Kit – BBC Up To 550 HP #3011454-05 

XFI Fuel Injection Kit – BBC Up To 1,000 HP #3011454-10 

XFI Fuel Injection Kit – BBC Tall Deck Up To 1,000 HP #3011572-10 

XFI Fuel Injection Kit – SBF Up To 550 HP #3031302-05 

XFI Fuel Injection Kit – SBF Up To 1,000 HP #3031302-10 

XFI Fuel Injection Kit – Ford Windsor Up To 550 HP #3035351-05 

XFI Fuel Injection Kit – Ford Windsor Up To 1,000 HP #3035351-10 

#3012350-05 

* Minor machine work or clearancing to the intake manifold may be 

required, depending on the cylinder heads used. 

** Kit contents may vary by application. Call for specific kit contents. 

*** Naturally aspirated horsepower figures. 

EFI Crate/Transplant 

Engine Management Kits 

For owners of fuel injected crate/transplant engines, FAST presents a solution 

to allow easy conversion to aftermarket EFI for late model GM and 

Chrysler engines. Kits are tailored to perfectly match the specific brand and 

model of crate engine being converted and include a FAST XFI system, 

an XIM Ignition Module, cable-driven 92mm high-flow throttle body, and 

all necessary plug and play wiring. 

• Kit allows easy conversion to aftermarket EFI for late 

model GM & Chrysler applications 

• Includes XFI , XIM Ignition Module, cable-driven 

throttle body and necessary wiring 

• Provides flexibility to precisely tune your engine for 

performance upgrades using aftermarket components 

EFI Crate/Transplant Engine Management Kit 

For GM LS1/LS6 


For GM LS2 – 2005 Only 


For GM LS2/LS3/LS7 – 2006 & Newer 


For Chrysler 5.7L Hemi 


For Chrysler 6.1L Hemi (Includes 392) 

#301009 1 

#301010 

#301011 

#301012 

#301013 

1 

Part #301009 does not include throttle body. 

* Kit contents may vary by application. Call for specific kit contents. 

#301010 

08

XFI Touch Screen Dash/Data Logger 

Get In Touch With Your Vehicle. 

Without comprehensive data from all of your vehicle’s sensors and 

powertrain controllers, it is difficult to identify what changes should 

be made in order to correct problems and improve track times. 

FAST offers the perfect solution in the form of the revolutionary 

XFI Touch Screen Dash/Data Logger. This unit functions as both 

an electronic dashboard and a data logger for vehicles running the 

FAST XFI Fuel Injection System. With its state-of-the-art monitoring 

and data logging capabilities, the XFI Touch Screen Dash/Data 

Logger can assemble a comprehensive, real-time picture of just 

what is going on under your vehicle’s hood. 

The XFI Touch Screen Dash/Data Logger features a 6-inch, fully programmable LCD touch screen 

display and has the ability to display its data in a multitude of scales, units and gauge configurations. 

Its backlit display can be user-customized to a wide variety of configurations at the touch of a finger 

or stylus. Engineered to work with any level of vehicle modification from stock to all-out race, the 

XFI Touch Screen Dash/Data Logger is able to monitor and display output from a variety of different 

input sources, including frequency (rpm, wheel speed etc.), analog input and sources that require 

programmable input parameters such as MAP and MAF. As a data logger, the unit has a 2 MB memory 

module* that will store up to one hour of data. 

* Example based on 8 analog inputs, 2 speed inputs, and transmission controller and XFI ECU 

outputs recorded at a rate of 5 samples/second 

XFI Touch Screen Dash/Data Logger #301417 

Classic FAST To Dash Adapter Cable #301442 

• Allows for fine tuning of the TCU through the 

dashboard without a laptop 

• Simultaneous monitoring & data logging of up to 

25 separate input channels 

• 8 analog inputs, 2 speed inputs, and programmable 

input parameters 

• Logged data is viewable through display screen 

or downloadable via USB into C-COM XFI or 

other popular Windows based programs for convenient 

data manipulation and analysis 

• 2 PWM outputs configurable to drive a variety of 

useful accessories, including relays, shift lights, 

nitrous or boost control solenoids, etc. 

• High resolution, backlit 320 X 240 display can be 

touch-programmed with fingers or stylus 

• Over 1 hour of continuous data logging time* with 

standard 2 MB memory module 

• CAN communication allows all engine data from 

XFI to be transferred to the dash via 2 wires 

• Compatible with classic FAST ECU when used 

with #301442 adapter harness 

09

XFI Electronic Fuel Injection Components 

XFI EGT Module 

The XFI EGT (Exhaust Gas Temperature) Module from FAST allows XFI owners to 

monitor up to 8 EGT sensors without requiring the use of the 8 spare auxiliary XFI 

inputs. The XFI EGT Module utilizes a small, thin cable to communicate through a 

high speed CAN (Controller Area Network) connection. 

XFI EGT Module #301418 

XFI EGT Module Kit w/ Harness, Fittings & Thermocouples #301405 

Single 12" Probe – 1/4" Diameter #30137 





Weld In EGT Fittings – 1/8" NPT #301443 

EGT Fitting Caps #301444 

#301418 

Crank Triggers 

FAST turned to the OEMs to see what they 

trust in the way of crank triggers for their 400 & 

500 hp daily drivers. Until now, flying magnetic 

trigger wheels with bulky inductive pickups 

have been used with the risk of broken magnets 

or losing magnets at high engine rpm, 

which is detrimental to engine efficiency. But 

not any more. 

The FAST Crank Trigger is a magnet-free 

device with a wheel constructed from ASTM 

A36 grade steel that is so strong that it is 

only .125-inch thick and is virtually indestructible. 

With the wheel being this thin, it 

not only weighs less but requires less space 

than competitors’ aluminum versions. The 

FAST inductive sensor is also much smaller 

than others on the market and is hermetically 

sealed with the connector molded into the 

body. This sensor is used by OEMs both on 

and inside the motor and provides accurate 

timing and is long lasting. 

XFI 3-Axis Accelerometer Module 

The XFI 3-Axis Accelerometer Module gives you the ability to read g-forces for acceleration/deceleration, 

vertical motion and turns. This module, designed to communicate 

with the C-Com XFI software, allows an individual to test and improve 

launches, braking and cornering of your vehicle. Possible uses for this are off-road, 

road racing, drag racing and even your street performance vehicle. 

XFI 3-Axis Accelerometer Module #301419 

FAST GPS Module For Use With Touch Screen Dash #301445 

Small Block Chevy Crank Trigger 

For 7.00" Balancer 

Small Block Chevy Crank Trigger 


Big Block Chevy Crank Trigger 


Small Block Ford Crank Trigger 


#301270 

#301270 

#301280 

#301180 

#303565 

* Mount brackets included with some part #’s, call for 

specific components 

#301419 

10

EFI HELP 1.877.334.8355 

Dual-Sync Distributors 

FAST Dual-Sync Distributors are an easy, drop-in, plug-and-play solution 

for fully sequential high performance V8 EFI engine applications. Featuring 

reluctors and pick-ups that have been properly aligned right out of the box, 

they eliminate the need to set crankshaft reference angles or rotor phasing 

manually before installation. FAST Dual-Sync Distributors also feature housings 

that are CNC-machined from high-quality 6061-T6 billet aluminum. Using 

high output magnetic pick-ups to generate high capacity, noise resistant, 

discrete switching signals to the XFI ECU, they deliver extremely precise 

ignition timing and long life. 

Small/Big Block Chevrolet Distributor #305005 

Big Block Chevrolet (Tall Deck) Distributor #305017 

Small Block Ford Distributor #305007 

Ford Windsor Distributor #305009 

FE Ford Distributor #305010 

Ford 351C-460 Distributor #305015 

Small Block Chrysler Distributor #305011 

B Engine (383-400) Chrysler Distributor #305012 

RB Engine (426-440) Chrysler Distributor #305013 

Pontiac Distributor #305016 

Oldsmobile Distributor #305018 

Replacement Distributor Cap & Rotor #305014 

Replacement Distributor Cap #305014C 

Replacement Distributor Module #305014M 

Replacement Distributor Rotor #305014R 

XIM Ignition Module 

The FAST XIM Ignition Module lets you easily install the FAST XFI Fuel 

Injection System on many distributor-less ignition type EFI engines. It’s a 

simple plug and play installation with factory type connectors that plug into 

your factory sensors. 

XIM Ignition Module (No Harness) #305008 

GM LS1/LS6 XIM Kit W/ Harness #301311 

GM LS2/LS3/LS7 XIM Kit W/ Harness #301312 

GM LS1/LS2/LS3/LS6/LS7 XIM Connector Kit #301311K 

Ford Modular Coil-On-Plug XIM Kit W/ Harness #301313 

Ford Modular Coil-On-Plug XIM Connector Kit #301313K 

Ford 4.6, 5.4L Modular Coil-On-Plug 

(Includes XIM ) Alternate Coil Option 

#301313A 1 

Chrysler 5.7L EFI Hemi XIM Kit W/ Harness #301316 

Chrysler 5.7L EFI Hemi XIM Connector Kit #301316K 

Chrysler 6.1L EFI Hemi XIM Kit W/ Harness #301314 

Chrysler 6.1L EFI Hemi XIM Connector Kit #301314K 

Universal XIM Kit W/ Harness #301315 

Universal XIM Connector Kit #301315K 

1 

Must use part #30256-1 

#305005 

#305007 

XIM Standalone Coil-On 

Plug Ignition Kits 

The engineers at FAST have taken the XIM to a 

new level. The coil-on plug ignition controller, originally 

developed for use with XFI systems, is now 

available in a standalone kit. These kits will enable 

programmable control of the popular late model 

coil-on plug ignition systems, independent of the 

fuel delivery method or any factory computer. The 

standalone XIM can be custom tuned as desired 

with the easy-to-use adjustment dial pots. This bolton 

solution to coil-on plug ignition is the easiest and 

most reliable way to run a carburetor or EZ-EFI on 

GM LS engines, Ford Modular motors and Chrysler 

Hemi engines. Complete kit, does NOT require XFI 

or OE computer. Ready to run, tuning optional. 

GM LS1/LS6 Standalone XIM w/ Harness #3013112 

GM LS2/LS3/LS7 Standalone XIM w/ Harness #3013122 

Ford Modular Standalone XIM w/ Harness #3013132 

Chrysler 5.7 Hemi Standalone XIM w/ Harness #3013162 

Chrysler 6.1 Hemi Standalone XIM w/ Harness #3013142 

#305008 

#305009 

11

Precision-Flow Fuel Injectors 

FAST Precision-Flow Fuel Injectors deliver the outstanding 

idle quality, unparalleled flow consistency and 

durability essential for high performance EFI engine applications. 

Engineered to yield faster throttle response, 

reduced clogging and superior fuel atomization, Precision-Flow 

Fuel Injectors are manufactured to the tightest 

tolerances in the industry. 

.551" (Outside To Outside) 

(Minitimer 

Type Connector) 

NOTE: Drawing 

not to scale 

.551" (Outside To Outside) 

• State-of-the-art magnetics improve injector opening times in order 

to yield faster throttle response 

• Precision ground pintle and wide spray angle both help to produce 

and deliver superior fuel atomization 

• Redesigned valve body resists clogging & improves hot starting 

• High-impedance injector models available up to 60 lb/hr for trouble-free 

OEM computer or XFI compatibility 

• Low-impedance 1 injectors available up to 60 lb/hr for maximum 

performance with aftermarket EFI systems, including FAST XFI 

1 

Note: Low-impedance injectors can not be used with OEM computers 

2.550" (Center To Center) 

Choosing your Precision-Flow Fuel Injectors 

1. Take your target peak horsepower and multiply by 

• .5 for naturally aspirated • .6 for supercharged 

• .625 for turbocharged 

2. Take that figure and divide by the number of cylinders. 

3. Divide by .9 (for 90% duty cycle). 

This will give you the lbs/hr you will need from each injector. 

Example: 520 horsepower, naturally aspirated V8 

(520 x .5=260), (260/8=32.5), (32.5/.9=36) 

This application would require 36 pound per hour Precision-Flow Fuel Injectors 

(Part #303608). If the formula gives you a number that is not one of 

the injector sizes, the general rule is to move up to the next largest size. 

12 

The FAST R&D Fuel Flow Bench is a custom built fuel injector dyno that is 

unequaled. Designed by FAST engineers, the one-of-a-kind system & allows 

for advanced testing & development of an injector’s flow capabilities. 

24 lb/hr (252cc/min) High-Impedance Single Injector #302400 




55 lb/hr (578cc/min) Low-Impedance Single Injector #305500 





* All Injectors also available in packages of 4, 6 & 8. Simply change the last 

‘0’ in part number to desired quantity. 

** All Injectors flow rated at 43.5 psi


Precision-Flow 

GM Gen IV Fuel Injectors 

The FAST Precision-Flow Fuel Injectors for GM Gen IV engines are the highest 

flowing injectors available and are uniquely designed for direct installation into 

LS2 and LS3/LS7/L76/L92/L99-style engines. Available in two different height 

configurations and a wide range of flow rates, the injectors are correctly sized 

(shorter than common LS1/LS6 injectors) and feature the correct EV6/USCAR connector, 

enabling a hassle-free plug-in operation. 

.551" 

(Outside To Outside) 

.551" 


LS2-Type 33 lb/hr (346.5cc/min) 

High-Impedance Single Injector 

LS2-Type 46 lb/hr (483cc/min) 


LS2-Type 57 lb/hr (598.5cc/min) 


LS3/LS7/L76/L92/L99-Type 39 lb/hr (409.5cc/min) 


#30332-1 

#30462-1 

#30572-1 

#30397-1 

1.480" 

(Center To Center) 

2.078" 

(Center To Center) 

LS3/LS7/L76/L92/L99-Type 50 lb/hr (525cc/min) 


#30507-1 





#30657-1 

#30857-1 

.580" 


.580" 


* All injectors also available in packages of 4, 6 & 8. Simply change the -1 to 

-4, -6 or -8 for the desired quantity. 

** All Injectors flow rated at 58 psi. (Stock OE LS operating pressure) 

Fuel Injector Adapter Harnesses 

& Connector Kits 

FAST Fuel Injector Adapter Harnesses and Connector Kits enable easy retro-fitting of 

both new and old style electronic fuel injectors. New style fuel injectors can be used 

on vehicles equipped with older-style Minitimer connectors. Retro-fitting a Minitimer 

injector into a USCAR harness is also possible with a different adapter harness. Connector 

kits, complete with terminals, seals, and plugs, are available as well, allowing 

direct re-termination of existing harnesses with the correct connectors, either 

Minitimer or USCAR. 

Minitimer 

Type Connector 

Harness Terminals 

USCAR 


Minitimer Type Connector Kit #170599-1 

USCAR Type Connector Kit #170600-1 

Minitimer To USCAR Type Connector #170603-1 

USCAR To Minitimer Type Connector #170604-1 

* Each connector & kit are also available in packs of 8. Simply change the -1 to -8. 

#170604-1 #170603-1 

#170600-1 #170599-1 

USCAR 


Minitimer 


Injector Terminals 

13

Sensors 

Sensor Kits 

Making the change from carburetion to electronic fuel injection (EFI) can be intimidating. Just understanding how many components are required to make the change can be 

challenging enough, but determining which kind of engine sensors are required to make the swap can be completely overwhelming. FAST has once again taken the lead in 

simplifying your conversion to EFI with our new sensor kit. In each kit you receive every sensor you’ll need to make the total conversion from carburetor to EFI with one simple 

part number. Our kit comes complete with excellent, high-quality sensors in a wide variety of styles to cover GM or Ford-style throttle position and 1, 2, 3 and 5 bar Manifold 

Absolute Pressure (MAP) sensors. These sensors cover a wide range of engines and configurations, including 4, 6, and 8 cylinders; both supercharged and turbocharged, as 

well as normally aspirated engines. 

Sensor Kits Include the Following: 

• Manifold Absolute Pressure Sensor (MAP) 

• Air Temperature Sensor (ATS) 

• Coolant Temperature Sensor (CTS) 

• Throttle Position Sensor (TPS) 

MAP 

Ford 1 Bar #307049 

Ford 2 Bar/14.5psi #307050 

Ford 3 Bar/29.0psi #307051 

Ford 5 Bar/43.5psi #307052 

GM 1 Bar #307053 

GM 2 Bar/14.5psi #307054 

GM 3 Bar/29.0psi #307055 

GM 5 Bar/43.5psi #307056 

TPS 

ATS 

CTS 

#307051 Kit Shown 

Relays 

For switching any high current or high load device. 

20-AMP Relay #307010 

30-AMP Relay #307011 

75-AMP Relay #307019 

Digital 40-AMP Relay #307043 

#307011 

5 Wire Oxygen Sensor 

For wide-band, closed-loop applications. The sensor can read air/fuel ratios from 

9:1 to 16:1 

#307000 

Replacement Wide-Band O 2 Sensor (EZ-EFI or Air/Fuel Meter) #170408 

5 Wire Wide-Band Oxygen Sensor LHA-Type (XFI ) #301422 

5 Wire Wide-Band Oxygen Sensor Mating Connector Kit (XFI ) #301422K 

5 Wire Wide-Band Oxygen Sensor L1H1-Type (Classic or XFI ) #307000 

Oxygen Sensor Fitting #30168 

Oxygen Sensor Fitting Plug #30169 

Oxygen Sensor Fitting and Plug Kit #307018 

14

EFI HELP 1.877.334.8355 

Manifold Absolute Pressure Sensors 

(MAP) 

This sensor, by monitoring intake manifold vacuum, measures the amount 

of load being placed on the engine. The MAP sensor relays engine load 

output to the ECU, which in turn adjusts fueling for optimum performance 

and economy. Available as 1 bar, 2 bar, 3 bar or 5 bar sensors. 

MAP 1 Bar Sensor, LS1 Style #307029 

MAP 1 Bar Sensor #307007 

MAP 2 Bar Sensor #307008 1 



1 

Includes mating connectors 

#307009 

Coolant Temperature Sensor (CTS) 

Utilizes a brass-plated thermistor to measure engine coolant temperature. 

As the engine operating temperature increases, the resistance in the 

thermistor decreases, informing the ECU to adjust fueling. 

Coolant Temperature Sensor – 3/8" NPT #307003 

#307003 

Throttle Position Sensor (TPS) 

The throttle position sensor bolts to the throttle blade shaft and relays 

throttle opening/closing information to the system ECU. The TPS is constructed 

of high resistance material with a “sensitive” rotator for accurate 

throttle position measurement. 

Throttle Position Sensor – Ford #307005 

Throttle Position Sensor – GM #307006 

Throttle Position Sensor – GM LT1 #307028 

Throttle Position Sensor – GM LS #54020 

TPS Adapter Harness – Early To Late GM #308022 

#307005 

Air Temperature Sensor (ATS) 

Monitors incoming air temperature for the ECU system. This information 

helps the ECU inject the proper amount of fuel into the system. 

Air Temperature Sensor – 3/8" NPT #307004 

#307004 

Idle Air Control Motor (IAC) 

The idle air control allows the ECU system to control engine idle speed by 

controlling airflow around the throttle body blades. 

IAC GM TPI Style #307014 

IAC GM LT1/LT4 Style #307015 

IAC GM LS1 Style #307059 

Remote IAC Valve Adapter w/ Filter #307016 1 

IAC H ousing (Adapts Ford to GM) #307022 2 

IAC Adapter Harness - Early To Late GM #308023 

#307015 

1 

Includes #307014 TPI Style IAC 

2 

Use with #307014 TPI style 

15

Pressure Sensors 

Compatible with XFI and FAST Touch Screen Dash/Data Logger & designed 

for harsh automotive environments, these pressure sensors allow you to monitor 

vital pressures throughout your powertrain. Fuel, oil and nitrous pressure 

are just a few examples. Constructed from a stainless steel body with 1/8" NPT 

thread, each sensor is supplied with a sealed mating connector and terminals. 

Single Pressure Sensor Kit 0-100PSI #307062 



Fuel Injector Bungs 

Designed for do-it-yourself fabricators who make their own multi-port fuel injection 

manifolds; these aluminum bushings can be welded or epoxied to a 

single plane, dual plane, tunnel ram or sheet metal manifold. 

Fuel Injector Bungs (8-pack) #307017 

.875" 

Major Diameter 

1.150" Length 

.875" 

Minor Diameter 

.546" ID 

Universal Fuel Rails 

FAST Fuel Rails are machined from 6005A-T5 aluminum and feature a large 

11/16" inside diameter for consistent pressure at each fuel injector. Black anodizing 

helps to promote heat dissipation and prevent oxidation. Offered in 18, 24, 

36, 48 and 72" lengths, FAST has you covered no matter the application. 

Universal Fuel Rail – 18 Inch #30700218B 





16

LSX 92mm Intake Manifold 

• Increases horsepower over stock 

manifold with no loss of drivability 

or low rpm torque 

• Incorporates high-quality polymer 

materials which resist “heat sink” 

effect of aluminum 

• Maximizes potential of other popular 

engine performance upgrades 

such as cylinder heads 

#54039 

#54095 

LSX 92mm Intake Manifold 

The patented FAST LSX 92mm Intake Manifold is a three-piece Gen III composite manifold proven to deliver increased 

performance without compromising bottom-end drivability or high rpm power. For both street and racing GM 

Gen III (LS1, -2 & -6) applications, this intake manifold is a bolt-on installation and is designed to work with the FAST 

Big Mouth 92mm Throttle Body . The FAST LSX 92mm Intake Manifold maintains the performance gains achieved 

over stock intake manifolds with no loss in drivability or low rpm torque. While it delivers terrific performance right out 

of the box, it can be ported for even more flow. The intake features the added benefits of corrosion-free stainless steel 

assembly bolts, an improved throttle body sealing flange and o-ring gasket and threaded insert throttle body mounts 

that provide increased durability. 

LSX 92mm Intake Manifold #54039 

LSX 92mm Upper Shell (Rev J) #54040 

LSX 92mm Lower Shell (Rev J) #54035 

LSX 92mm Middle Shell #54007 

LSX 92mm Middle Shell (Rev J) #54036 

Big Mouth Throttle Bodies 

When it comes to improving your engine’s performance, increased airflow is a key ingredient. The FAST Big Mouth 

Throttle Bodies for the FAST LSX 92mm & LSX R / LSX RT 

 

102mm Intake Manifolds increase airflow through a 

series of innovative design changes and a slightly enlarged throttle opening. FAST also invested significant testing 

& engineering resources into optimizing cross-sectional flow and eliminating airflow turbulence, especially at part 

throttle operation. 

In addition, these throttle bodies offer increased throttle blade thickness to eliminate 

deflection commonly found with other throttle bodies, especially those in 

boosted applications. A smoother operating offset blade pivot improves throttle 

response, and a beefed up linkage and dual throttle spring mechanism ensure 

total throttle control. The FAST Big Mouth 92mm Throttle Body will deliver bolton 

GM Gen III (LS1, -2 & -6) horsepower while the 102mm version is designed to 

maximize potential performance upgrades on all Gen III and IV engines. 

Big Mouth 92mm Throttle Body #54092 

Big Mouth 92mm Throttle Body w/ TPS (No IAC) #54095 

Big Mouth 102mm Throttle Body #54102 

Big Mouth 102mm Throttle Body w/ TPS #54103 

Throttle Position Sensor #54020 

Chrysler 5.7/6.1 Hemi Adapter (92mm Only) #112001 

17

LSX RT 

 

102mm Intake Manifold 

• Designed for late model GM 4.8/5.3/6.0L cathedral 

port truck engines and all LS1, -2, -6 based 

engines (race applications with appropriate 

cowl clearance) 

• Multi-layer modular design with removable runners 

for easy disassembly & porting 

• 102mm inlet works w/ 90, 92 or 102mm throttle 

bodies for high flow & minimal restriction 

• Advanced polymer material is strong, lightweight 

& cools intake charge for enhanced power 

• Big gains in rear-wheel hp yet retains factory 

fitments & under-hood clearance requirements 

#146602 

LSX RT 

 


Designed specifically for GM 4.8/5.3/6.0L cathedral port truck engines and cathedral port LS1, -2, -6 race applications 

where hood clearance is not a concern, the FAST LSX RT 

 

102mm Intake Manifold follows the path chartered by the original 

FAST LSX Gen III Intake by featuring a modular design that allows for easy porting and disassembly and a runner 

design that yields an incredible 25 peak horsepower gain over the stock intake, on a stock 6.0L engine with a Big Mouth 

102mm Throttle Body . And similar to the LSX R 

 

102mm Intake Manifold for cars, the LSX RT 

 

features the ability to remove 

individual runners for modification. 

The LSX RT 

 

is constructed from a proprietary precision injection molded polymer which offers many benefits, including lighter weight, greater strength and lower heat soak 

propensity. While it features a 102mm air inlet that was designed for the FAST Big Mouth 102mm Throttle Body , it can also be used with OEM 90mm or aftermarket 92mm 

throttle bodies (three-bolt electronic throttle bodies require an adapter). Other features include integrated nitrous bungs and precise bolt-on fit that permits the use of factory 

accessories and OEM fuel/emission connections without adjustments or clearance issues. Some GM truck models may require the FAST 92mm or 102mm throttle body. 

 

LSX RT 102mm Intake Manifold #146602 1 

 

LSX RT 102mm Upper Shell #146100 

 

LSX RT 102mm Lower Shell #146601 

 

LSX RT 102mm Replacement Runner Set #146653 

1 

Requires fuel rail kit, see diagram on page 20 

500 

450 

400 

350 

300 

250 

200 

Baseline 6.0L 75mm Intake/TB 

LSX RT 

 

102mm/102mm TB 

Modified 6.0L 75mm Intake/TB* 

Modified LSX RT 

 

102mm Intake/102mm TB* 

2500 3000 4000 4500 5000 5500 6000 6500 

* High flow CNC heads and camshaft upgrade 

18

LSX R 

 


MODULAR DESIGN 

W/ REMOVABLE INTAKE RUNNERS 

LSX R 

 


#146102 Shown with #54103 

FAST engineers teamed up with airflow specialists at RHS to develop polymer intake manifolds for rectangular port 

GM LS3-type and LS7 engines. Testing on a stock LS7 engine with a Big Mouth 102mm Throttle Body produced gains of 

16+ horsepower and 26+ rear wheel horsepower with a 500c.i. engine. The LSX R 

 

102mm Intake Manifold features a multilayer 

modular design that allows easy disassembly and porting. Extensive testing led to a runner design that is longer 

and less restrictive and gives the user the ability to remove individual runners from the manifold for modification. 

Constructed from the same advanced polymer material as the LSX 92mm Intake Manifold, the LSX R 

 

offers a host of benefits over aluminum aftermarket intakes, including 

lighter weight, increased strength and improved heat dissipating characteristics. While the LSX R 

 

features a 102mm air inlet that is perfectly suited to the FAST Big Mouth 

102mm Throttle Body , it can also be used with OEM or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on 

fitment that allows the use of factory accessories without modification or clearance concerns. 

 

LSX R 102mm Intake Manifold – LS3-Type Car #146102 

 

LSX R 102mm Intake Manifold – LS7 Car #146202 1 

 

LSX R 102mm Upper Shell – LS3-Type & LS7 Car #146000 

 

LSX R 102mm Lower Shell – LS3-Type Car #146001 

1 

LS7 requires fuel rail kit, see diagram on page 20 

LSX R 

 

102mm Lower Shell – LS7 Car #146201 

LSX R 

 


Replacement Runner Set – LS3-Type Car 

LSX R 

 


Replacement Runner Set – LS7 Car 

#146053 

#146253 

LS Port Identification 

Raised Rectangle Port 

Rectangle Port 

Cathedral Port 

LS7 

LSX R 

 

Use Part #146202 

LS3 

L76 

L92 

L99 

LSX R 

 


LS1 

LS2 

LS6 

LSX 

LSX RT 

 

3rd Party Dyno Test 


or Part #146602 

19

Intake Manifold Options 

Having trouble determining which FAST Intake Manifold is the right one for your application? The diagram below can 

help. Find your LS application in one of the application boxes below and follow the arrows to determine the proper intake 

manifold part number, along with fuel rail options and other required and optional accessory pieces. Please refer to these 

diagrams as some parts are REQUIRED with the installation of a FAST intake manifold. 

LSX 92mm Intake Manifold (Cathedral Port) 

Application 

LS1 

LS6 

FAST LSX 

Intake 

LSX #54039 

Fuel Rail 

Options 

Use Stock 

Fuel Rails 

Required Parts 

LSX to LS2 

Fuel Rail 

Conversion Kit 

#54026 

(LS2 Only) 

Optional 

LSX Fuel Line 

Conversion Kit 

For 1998-02 

F-Bodies 

#54028-KIT 

LS2 

Use FAST Billet 

Fuel Rail Kit 

FAST Billet 

Fuel Rail Kit 

#54023 

LSX RT 

 

102mm Intake Manifold (Cathedral Port) 

Application 

1999-02 

Truck/SUV 

2003-07 

Truck/SUV 

Classic Body 

Style 

2007-Present 

Truck/SUV 

New Body 

Style 

FAST LSX RT 

 

Intake 

LSX RT 

 

#146602 

LSX RT 

 

#146602 

LSX RT 

 

#146602 

Fuel Rail/Adapter 

Plate Options 

Must Use 

FAST Billet 

Fuel Rail Kit 

Must Use FAST 

Billet Fuel Rail 

Kit & Adapter 

Plate Kit 

Must Use 

FAST Billet 

Fuel Rail Kit 

Required 

Parts 

FAST Billet 

Fuel Rail Kit 

#146028-KIT 

FAST Billet Fuel Rail 

Kit #146028-KIT & 

Adapter Plate Kit 

#146029-KIT 

FAST Billet 

Fuel Rail Kit 

#146028-KIT 

Throttle Body 

Options 

Use FAST 92mm 

Throttle Body 

Use FAST 102mm 

Throttle Body 

OEM Electronic 

OEM Electronic 

Required 

Parts 

#54092* 

#54102* 

*Part #54092 and #54102 require the use of a GM Purge Solenoid, #12581282 (not sold by FAST ) 

LSX R 

 

102mm Intake Manifold (Rectangle & Raised Rectangle Port) 

Application 

Chevrolet Corvette (LS3) 

Chevrolet Camaro (L99) 

Chevrolet Camaro (LS3) 

Pontiac G8 GT (L76) 

Pontiac G8 GXP (LS3) 

FAST LSX R 

 

Intake 

LS3 Version 

#146102 

Fuel Rail Options 

Use Stock 

Fuel Rail 

Use FAST 

Billet Fuel 

Rail Kit 

Required Parts 

FAST Fuel Injector 

Spacer Kit 

#146025-KIT 

FAST Billet Fuel 

Rail Kit 

#146027-KIT 

Chevrolet Corvette Z06 (LS7) 

LS7 Version 

#146202 

Must use one of 

two REQUIRED 

fuel rail kits 

FAST Billet 

Fuel Rail Kit 

#146027-KIT 

FAST OEM Style 

Fuel Rail Kit 

#146020-KIT 

20


LSX /LSX R 

/LSX RT 

 

Fuel Rails 

The FAST LSX /LSX R /LSX RT 

 

Fuel Rails feature a larger internal diameter that dampens 

the pulses and provides increased fuel volume, ensuring that your injectors never 

run dry. In addition, they yield better fuel distribution and ultimately greater horsepower. 

Featuring high strength billet, lightweight, red anodized aluminum construction 

(does not include Part #146020-KIT), FAST fuel rails deliver performance in addition 

to a show car quality appearance. The FAST fuel rails are available in a componentmatched 

kit, including black anodized #8 fittings and “super seal” o-rings. 

LSX LS1 Fuel Rail Kit w/ Fittings, O-Rings & Hardware #54023 

LSX LS1 Fuel Rails w/o Fittings 

#54023HDW 

LSX LS1 Fittings, O-Rings & Hardware (No Fuel Rails) #54023FRH 

 

LSX R OEM-Type LS3/LS7/L76/L99 Fuel Rail Kit (Non-Billet) 146020-KIT 

 

LSX R LS3/LS7/L76/L99 Billet Fuel Rail Kit 

146027-KIT 

 

LSX RT 4.8/5.3/6.0L & LS1/LS2/LS6 Billet Fuel Rail Kit 146028-KIT 

*LSX 

/LSX R /LSX RT parts are NOT interchangeable 

LSX /LSX R 

/LSX RT 

 

Seals & Hardware 

Big Mouth 92mm/102mm Throttle Body Bolt Kit #146019 

Complete LSX Manifold Hardware Kit 

(Includes TB Mounting Hardware) 

#54018C-KIT 

LSX Manifold Only Hardware Kit 

#54018M-KIT 

IAC Throttle Position Sensor (Cable Drive Only) #54020 

(1) LSX LS1 Replacement Intake Port Seal #54009-1 1 

LSX 90mm & 92mm Intake Rope Seal #54022 

LSX 92mm Throttle Body Seal #54041 

1 

Can be ordered in quantities of 8. Simply change the “-1” to “-8”. 

* LSX/LSX R /LSX RT 

 

are NOT interchangeable unless listed together 

 

LSX R 102mm LS3-Type Manifold Hardware Kit 146016 

 

LSX R 102mm LS7 Manifold Hardware Kit 146017 

 

LSX R 102mm LS3 Intake Port Seal #146003-1 1 

 

LSX R /LSX RT 102mm LS7 Intake Port Seal 146203 

 

LSX R /LSX RT 102mm Throttle Body O-Ring Seal #146004 

 

LSX R /LSX RT 102mm Upper to Lower Shell Intake Seal #146005 

 

LSX R /LSX RT 102mm Intake Runner Seal #146006-1 1 

 

LSX RT 102mm Manifold Hardware Kit 

146018-KIT 

LSX /LSX R 

/LSX RT 

 

Fuel System Accessories 

LSX LS2 Fuel Rail/Injector Adapter Kit #54026 

LSX /LSX R /LSX RT 

 

0-100 EFI Fuel Pressure Gauge Kit #54027 1 

LSX /LSX R /LSX RT 

 

0-100 EFI Fuel Pressure Gauge (Only) #54027G 1 

3/8" To 6AN Fuel System Conversion Fitting #54028 

LSX 

/LSX R /LSX RT Fuel Line Conversion Kit 

(1998-'02 LS1 F-Bodies w/ FAST Fuel Rails ) 

Crossover for FAST Fuel Rails 

#54028-KIT 1 

#54028FRC 

1 

LSX/LSX R /LSX RT 

 

parts ARE interchangeable when listed together 

2 

Can be ordered in quantities of 10. Simply change the “-1” to “-10”. 

LSX Fuel Line Conversion Kit w/ Fuel Pressure Gauge 

(1998-'02 LS1 F-Bodies w/ FAST Fuel Rails ) 

#54028G-KIT 

LSX LS1 Only Replacement O-Ring (Single) #54023OR-1 2 

LSX 8 SAE O-Ring To 8 AN Fitting 

#54023A-1 

LSX 8 SAE O-Ring To 6 AN Fitting 

#54023B-1 

 

LSX R LS3/LS7/L76/L99 Injector O-Ring 

#146020COR 

 

LSX R LS3/LS7 Fuel Injector Adapter Kit 

# 146025-KIT 

#54028G-KIT 

#54027 

#54028 

#54026 

21

4 Barrel Throttle Bodies 

FAST 4 Barrel Throttle Bodies incorporate tapered and radiused throttle bores and 

precisely machined progressive linkage for smooth throttle operation and unparalleled 

airflow. More airflow equals more horsepower. 

• Inward opening throttle blades eliminate part throttle directional 

influence by the blades that can cause poor air distribution 

• Shorter height for better airflow, easier packaging for tight hood 

clearance and reduced weight 

• Brass throttle blades control vibration & reduce thermal expansion 

• Throttle blades attached to stainless steel shafts w/ aircraft quality 

hardware and peened to assure positive retention 

• Bodies are machined from 6061-T6 billet aluminum for consistent 

quality, excellent appearance and light weight 

#307603 

High Flow 4150 Style 4 Barrel, Flows 1375 CFM 

(Includes TPS, IAC & Fasteners) 


(Includes TPS, IAC & Fasteners) Polished Version 


(Includes Ford-Style TPS) 

#307603 

#307603P 

#307602 

Precision Cast Throttle Body & Injector Assembly #304150 1 

Air Only Throttle Body Assembly #304149 2 

Billet 4150 Open Style 1" Spacer #30244 

Billet 4150 Open Style 1" Spacer 

Includes Gasket & Studs 

1 

Includes sensors & injectors 

2 

Does not include injectors or fuel rails; does include TPS, IAC & IAT 

#30246 

Single Plane EFI Intake Manifolds 

& Fuel Rail Kits 

Available for Small Block and Big Block Chevy (9.8" deck height) engines, as well 

as 289-302 (8.2" deck height) and 351W (9.5" deck height 1 ) Ford engines, the 

FAST XFI Single Plane Intake Manifolds are designed to produce tremendous 

horsepower and high rpm torque from 3500-7500 rpm (Big Block Chevy), 4500- 

8500 rpm (Small Block Chevy, 351W Ford) and 4500-9000 rpm (289/302 Ford). 

All manifolds are designed to accept square bore, four-barrel 4150-style throttle 

bodies, such as the FAST Part #307603, and feature a fuel injector boss in each 

runner that will accept any of the high performance injectors offered by FAST . The 

matching lightweight aluminum FAST fuel rails for the manifolds feature a large 

internal diameter for outstanding fuel pulse dampening and flow characteristics. 

#3012350 

Small Block Chevy Manifold #3012350 1 

Big Block Chevy Manifold #3011454 1 

Big Block Chevy 10.2 (Tall) Deck Manifold 

(Uses 4500/7602 TB) 

#3011366 1 

Ford 289/302 Manifold #3031302 1 

Ford 351W Manifold #3035351 1 

FE Ford Manifold #3033390 1 

Small Block Chevy Fuel Rail Kit #3012262 

Big Block Chevy Fuel Rail Kit #3011396 

Small Block/Ford Windsor Fuel Rail Kit #3035289 

1 

Minor machine work or clearancing to the intake manifold may be required 

depending on the cylinder heads used 

#3012262 

22

Fuel Systems 

FAST has taken the next step in making EFI (electronic fuel injection) easier with these FAST Complete Fuel System Kits. These kits cover 

all street performance applications and most bracket and super class drag racing categories. The fuel system kit is the perfect product for 

those switching from carburetion to EFI, building new EFI engines or simply upgrading their current fuel system. 

The FAST Complete Fuel System Kits are component-matched systems. With one part number, the FAST kits include everything you need 

to supply your state-of-the-art high performance, EFI-equipped engine. 

Race Fuel Systems 

The FAST Race Fuel Systems include fuel pump, pre-filter, post-filter, Y-block and fuel regulator, as well as the system fittings and wiring harness. Best of all, the components 

used to create the FAST Complete Fuel System Race Kits are made of aluminum and stainless steel to ensure years of long, trouble-free service. 

#307500 

KITS 

PART NUMBERS 

700 HP Forced Induction/1000 HP Naturally Aspirated Race Fuel System (Includes) #307500 

• 30 Amp Relay 

• Circuit Breaker, 10 Gauge Wire 

• Terminal Connectors 

• 600 lb/hr Pump 

• 3 Port EFI Regulator 

• 100 Micron Pre-Filter 

• 10 Micron Post-Filter 

• Y-Block, -10AN Ins, -8AN Outs 

• (1) -6AN Fitting & O-Ring 

• (2) -8AN Fittings & O-Rings 


• (2) -8 & -10AN Fittings & O-Rings 

900 HP Forced Induction/1200 HP Naturally Aspirated Race Fuel System (Includes) #307501 

• 30 Amp Relay 

• Circuit Breaker, 10 Gauge Wire 

• Terminal Connectors 

• 800 lb/hr Pump 

• 3 Port EFI Pro Series Regulator, (3) -8AN & 

(1) -10AN Ins and (1) -10AN Out 

• 100 Micron Pre-Filter 

• 10 Micron Post-Filter 

• Y-Block, -10AN Ins, -8AN Outs 




23

Street/Strip Fuel Systems 

The FAST Street/Strip Fuel Systems utilize OEM high-quality fuel pumps with filters 

and FAST regulators, as well as the system fittings, terminals, wiring, hoses and 

clamps (kits vary as seen in photos). Fittings are -6AN size or barb equivalent. 

Up to 500 HP In-Tank Style Street/Strip Fuel System #307032 

Up to 550 HP Street/Strip Fuel System #307503 

Up to 600 HP Street/Strip Fuel System #307502 

#307502 

#307503 

#307032 

Fuel Fittings & Accessories 

-8 SAE O-Ring to -8AN Fitting and O-Ring #54023A-1 

-8 SAE O-Ring to -6AN Fitting and O-Ring #54023B-1 

-8 SAE O-Ring Plug, Fitting and O-Ring #54028P 

Replacement -8 SAE O-Ring, Pack of 10 

#54023OR-10 

-6 SAE O-Ring to -6AN, Fitting and O-Ring #30251 

-6 SAE Socket Hex Port Plug w/ O-Ring 30273-1 

-6 SAE O-Ring to -8AN Straight Fitting w/ O-Ring 30281-1 


#30251OR-10 

-6AN to -6AN Female Coupler #30274 

-3 SAE O-Ring to -6AN, Fitting and O-Ring #30253-1 


#30253OR-10 

-6AN to GM 16mm x 1.5 or O-Ring, 

Steel Fuel Filter Fitting Adapter 

#30196 

Factory GM LS1 Fuel Rail Push-On Inlet Adapter Fitting, 

Converts to -6AN 

#54028 

FAST 0-100 PSI EFI Fuel Pressure Gauge, 1/8 NPT Rear 

Inlet (Works w/ all FAST Fuel Pressure Regulators 

#54027G 

Billet -6AN Inlet/Outlet Mini Filter #30272 

GM OEM EFI Fuel Filter (Steel) #30195 

Fuel Injector Bungs, Pack of 8 (See Page 16 for Specs) #307017 

Universal Fuel Rail (See Page 16 for Listings and Specs) 

Fuel Pressure Regulators 

The FAST Adjustable Fuel Pressure Regulator is a premium CNC billet regulator designed to exact specifications 

by our engineers. The unit features twin -6 feed side ports and one -6 return port on the bottom. The fully adjustable 

unit is vacuum referenced and utilizes a hex adjustment stud with jam nut. The unit has a 1/8 NPT gauge port, 

as well. The regulator is a kit, including the unit, mounting bracket, 1/8 NP plug and 1/8 NPT to 3/16" barb. The 

regulator can be used with a single feed (plug second feed) or with dual feeds. Requires the purchase of port fittings 

separately (all three ports are -6 SAE o-ring type) and can be selected from the FAST fuel fitting section. 

30-70PSI Adjustable Fuel Pressure Regulator, 

-6 SAE O-Ring Ports (1 Return, 2 Feeds) 

#307030 

OEM-Type Fuel Pressure Regulators 

Fuel Regulator – 5.0L Mustang #307024 

Fuel Regulator – GM 25-60PSI #307025 

Fuel Regulator – LT1 Corvette #307026 

Fuel Regulator – LT1 Firebird #307027 

#307030 

24

Wide-Band Digital Air/Fuel Meters 

FREE Download 

Optional Software Available 


#170608 

• Ideal for carbureted and EFI engines 

• Available in single or dual sensor units 

• Built-in data logging; no laptop required 

• Meters for gasoline, diesel & E85 fuels 

• PC-based software analysis tool 

• RPM-based option 

#170402 

#170701 

Easy. Intuitive. FAST 

With no laptop required, FAST has developed three simple, 

easy-to-use air/fuel meters for gasoline, diesel and ethanol/ 

methanol (E85) fuels. Available in single or dual sensor units, 

these meters give tuners the power to read two wide-band O 2 

sensors individually or average them together for maximum 

accuracy of the engine’s air/fuel ratio reading. The FAST Air/ 

Fuel Meters include several enhanced capabilities, including 

the built-in data logging capability that plays back recorded information 

on a lighted, full graphical display screen rather than 

using a laptop computer. Additional features include outputs 

for external data loggers, digital gauges, as well as a narrowband 

simulator function that allows you to feed your engine’s 

computer a factory signal while using the wide-band sensor 

for air/fuel measurement. 

#170614 

Gasoline Air/Fuel Meter (Single Sensor) #170401 

Gasoline Air/Fuel Meter (Dual Sensor) #170402 

Motorcycle Gasoline Air/Fuel Meter (Single Sensor) #170501 

Motorcycle Gasoline Air/Fuel Meter (Dual Sensor) #170502 

Dyno Gasoline Air/Fuel Meter (Single Sensor) #170601 

Dyno Gasoline Air/Fuel Meter (Dual Sensor) #170602 

Diesel Air/Fuel Meter (Single Sensor) #170701 

Diesel Air/Fuel Meter (Dual Sensor) #170702 

Ethanol/Methanol Air/Fuel Meter (Single Sensor) #170590 

Ethanol/Methanol Air/Fuel Meter (Dual Sensor) #170608 

Master Tuner Dual Sensor Air/Fuel Meter Kit #170614 

Replacement Accessories 

Threaded O 2 Sensor Bushing (Weld-In) #30168 

Replacement Wide-Band 0 2 Sensor #170408 

Single To Dual 0 2 Meter Conversion Kit #170445 

Replacement Cable (6 ft. w/ Power Lead) #170462 

Replacement Cable (6 ft.) #170463 





25

Air/Fuel Meter Accessories 

Digital Air/Fuel Meter RPM Module 

Compatible with all FAST Digital Air/Fuel Meters, the FAST Air/Fuel Meter RPM Module monitors and records 

engine rpm data that can be overlaid with air/fuel ratio readings. It can be calibrated with the touch of a button and 

the module plugs in-line with your existing O 2 sensor harness. The FAST Air/Fuel Meter RPM Module comes with 

everything you need, including the installation CD, communications cable, USB cable adapter, power source, rpm 

module, clip-on inductive pick-up and full instructions to get you up and running in no time. 

Digital Air/Fuel Meter RPM Module #170536 

Air/Fuel Ratio Module Kits 

FAST engineers have developed a kit that makes it easy for anyone to measure an engine’s air/fuel ratio. This plug and 

play universal O 2 sensor processing kit allows your data acquisition system or dyno software to record and display air/fuel 

ratios. Since it uses fully automatic sensor calibration, there’s no need for manual “free-air” calibration that competitive units 

require. Additionally, each sensor kit is a standalone unit, so using multiple kits for measuring all your engine’s cylinders is 

easy. Compatible with FAST Digital Air/Fuel Meters. 

#170579 

Air/Fuel Ratio Module Kit #170579 

XFI Wide-Band Auxiliary Air/Fuel Ratio Module Kit #170577 

Air/Fuel Ratio Module Kit for SuperFlow Dynos (Lemo/Sensor Box Connector) #170575 

Air/Fuel Ratio Module Kit (4 Pin AMP Connector or Sensor) #170636 

Digital Air/Fuel Meter Interior Mount Kit 

When hot-rodding down the street, it’s hard to safely read air/fuel data if the meter is sliding 

around. For easy viewing and safety, the FAST Air/Fuel Meter Interior Mount Kit allows you to 

attach your FAST Digital Air/Fuel Meter to the windshield with a removable suction cup system. 

The suction cup mounts to the meter through adhesive tape; no drilling or gluing required. 

Digital Air/Fuel Meter Interior Mount Kit #170493 

Value Priced! 

Wide-Band Air/Fuel Gauge Kit 

The FAST Wide-Band Air/Fuel Gauge Kit combines an economical and accurate 

2 1/16" gauge, Bosch wide-band oxygen sensor and standalone sensor control 

unit that mounts easily in the interior of any vehicle. Back-lit for easy night viewing 

and wired so it is powered up whenever the engine is running, this kit is not 

only for serious power tuning but also ideal for monitoring the overall fuel tune of 

the engine when daily driving or making passes at the track. Kit includes gauge, 

module, harness, sensor and bung. 

Wide-Band Air/Fuel Gauge Kit #170634 

EZ Clamp-On 

Tailpipe Wide-Band Sensor Mount Kit 

Perfect For 

Chassis Dynos 

& Street Tuning 

Made of stainless steel and convenient for quick oxygen sensor tests, this easy-to-use FAST 

kit slides into the tail pipe to prevent welding. The actual O 2 sensor screws into the kit, which 

includes a rubber cover to prevent damage to polished exhaust tips. 

EZ Clamp-On Tailpipe Wide-Band Sensor Mount Kit #170620 

26

Electronic Transmission Controller 

Today’s electronically-controlled overdrive transmissions can offer excellent fuel economy and performance, but factory transmission controllers often fall short of the mark when 

it comes to street/strip or retro-fit use, let alone all-out racing applications. The revolutionary Transmission Controller by FAST overcomes the shortcomings of performancecompromised 

OEM electronic transmission controllers and elevates electronically controlled automatic transmissions to a higher standard of performance and tunability. 

Engineered to work with nearly any electronically controlled automatic transmission, the FAST Transmission Controller is fully-programmable and can be run either as a 

standalone unit – even with a non-computer controlled engine – or in conjunction with either OEM or aftermarket ECUs, such as the FAST XFI Fuel Injection System and 

carbureted applications. The FAST Transmission Controller will work with most GM, Ford, and Chrysler electronically-controlled automatic transmissions and includes a wide 

array of tuning options including load, gear, rpm and speed-based programming – all of which can be adjusted via a simple serial port interface with any Windows-based 

PC or laptop. Its ability to communicate with any ECU that supports CAN 2.0b devices means that the FAST Transmission Controller uses a simpler, easier-to-install wiring 

harness than most other aftermarket transmission controllers. The FAST Transmission Controller includes easy-to-use T-Com software, which allows simple plug and play 

transmission operation via several built-in programs, as well as custom tuning and programming, data logging and fault diagnosis. 

• Compatible with almost all popular GM, Ford and Chrysler electronic 

automatic transmissions 

• Fully programmable through easy-to-use T-Com software 

• Real-time switchable dual calibrations 

• Has the ability to communicate with RS-232 and J1939 protocol 

ECUs & compatible CAN 2.0b devices 

• Electronic control over shift points, shift firmness, torque converter 

clutch (TCC) lockup in all gears and shift speed 

• Fully programmable based on gear, load, speed and rpm 

• Multiple shift modes & button shift capability 

• Powerful data logging and self diagnostics 

• Standalone or interface with XFI or EZ-EFI 

• Durable, weather-resistant housing 

Electronic Transmission Controller & Wiring Harnesses 

Transmission Controller #301002 

GM/Chevrolet 4L60E, 4L65E, 4L70E, 

4L80E, 4L85E Harness 

#301427 

GM 4T65/80E Harness #301428 

Ford 1992-97 AODE/4R70W Harness #301430 

Ford 1998 & Later AODE/4R70W Harness #301431 

Ford 1989-94 E4OD Harness #301432 

Ford 1995 & Later E4OD Harness #301433 

Ford 1998 & Later 4R100 Harness #301434 

Download Software 

FREE 


How To Order Your 

Transmission Controller: 

1. Choose Transmission Controller 

Part # 

301002 

2. Select the wiring harness for 

your application 

Part # 

#301002 

27

FAST-FLASH Power Programmers 

FAST-FLASH Power Programmers give your vehicle a 15 minute tune-up that 

unlocks hidden performance potential, yielding maximum horsepower and 

torque. The process is simple – just plug the programmer into your vehicle’s 

under-dash ODBII port, and answer a few questions. Select from three distinct 

modes (performance, towing or economy), and FAST-FLASH automatically reprograms 

your vehicle’s computer for idle quality and optimized air/fuel ratios. 

It also re-calibrates the ignition timing, transmission shift points and the speedometer 

for gear and tire changes. 

Vehicle Engine Year Part # 

Chevrolet/GMC Full Size Truck/Van 4.8L, 5.3L, 6.0L 1999-2005 #170382 

Chevrolet/GMC Full Size Truck/Van, Suburban, Tahoe 5.0L, 5.7L 1996-1997 #170383 

Chevrolet Full size Truck 5.0L, 5.7L 1998 #170382 

Chevrolet Camaro 5.7L 1999-2002 #170382 

Chevrolet Corvette 5.7L 1999-2002 #170382 

Chevrolet/GMC Full Size Truck/Van 7.4L 1996-1997 #170383 

Chevrolet/GMC Gull Size Truck/Van 7.4L 1998-2000 #170382 

Chevrolet Full Size Truck/Van 8.1L 1999-2005 #170382 

Pontiac Firebird, Trans Am 5.7L 1999-2002 #170382 

Pontiac GTO 5.7L 2004 #170382 

Vibration Absorber Carburetor Spacers 

The patent pending Vibration Absorber Carburetor Spacer prevents high-rpm lean out and float 

bowl aeration and insulates against power-robbing engine heat transfer. The product of over five 

years of R&D and testing, this revolutionary one-inch tall, billet aluminum spacer produces proven 

hp gains by dampening engine harmonics and vibration. The result is a consistent, non-aerated fuel 

supply that yields precise “real world” carb tuning for additional performance. 

Without 

Aerated/Turbulent 

With 

Steady Fuel 

Delivery 

Built for use with 4150, 4500 and 2300 model carburetors, both gasoline and alcohol application 

spacers are offered. The Vibration Absorber Carburetor Spacers feature a durable shock resistant 

composite construction, making them compatible with any high-rpm street or race applications. 

• Prevents high-rpm lean out, float bowl aeration and insulates against heat 

transfer, allowing the carb to be tuned for additional horsepower 

• One-inch spacer plate, constructed of billet aluminum and durable shock resistant 

composite material, is suited for all types of street & racing applications 

Jet 

Jet 

• Eliminates harmful harmonics & vibrations that typically transfer from the 

engine to the carburetor, causing aeration of the fuel in the float bowl 

• Produces a more consistent fuel curve, prevents float bowl aeration and creates 

a denser fuel charge all in one easy-to-install spacer plate 

#96000 

• Available for 4150, 4500 & 2300 style carbs; alcohol or gas applications 

4150 Style (Square Flange 4-Barrel) #96000 

4500 Style (Dominator 4-Barrel) #96001 

2300 Style (2-Barrel) #96003 

See the difference 

@ fuelairspark.com 

28

MaxJet Precision Carb Jets 

EFI HELP 1.877.334.8355 

Often you will hear a racer say, “I made two jet changes, but the engine still didn’t run properly.” The reason 

for this relates directly to the jets being used. Other jets are mass-produced with a wide tolerance, then plated. 

Many of these jets use the same orifice size with the only difference being different angle tapers that supposedly 

change the flow-rate characteristics. Other jets also use a “slot” that requires a special, expensive tool to install. 

Ultimately, these slots become damaged and that damage creates a turbulence that severely affects the fuel flow 

as much as 50 percent. 

MaxJet Precision Carb Jets are available from 0.050" to 0.120" in gasoline jets and from 0.121" to 0.140" in 

alcohol jets. Sizes are in 0.001" increments and are compatible with all known racing fuels. MaxJet Precision 

Carb Jets are easily crossed over from Holley jets; simply find the Holley size that you’re currently using and follow 

over to the MaxJet column. 

Gasoline Jets 

(1/4-32 thread) 

0.050-inch - Holley 52 

#MJ50-2 


#MJ51-2 


#MJ52-2 


#MJ53-2 


#MJ54-2 


#MJ55-2 


#MJ56-2 


#MJ57-2 


#MJ58-2 


#MJ59-2 


#MJ60-2 


#MJ61-2 


#MJ62-2 


#MJ63-2 


#MJ64-2 


#MJ65-2 


#MJ66-2 


#MJ67-2 

0.068-inch - N/A 69.25 #MJ68-2 

0.069-inch - N/A 69.50 #MJ69-2 

0.070-inch - N/A 69.75 #MJ70-2 


#MJ71-2 

0.072-inch - N/A 70.25 #MJ72-2 

0.073-inch - N/A 70.50 #MJ73-2 

0.074-inch - N/A 70.75 #MJ74-2 


#MJ75-2 


#MJ76-2 


#MJ77-2 


#MJ78-2 


#MJ79-2 


#MJ80-2 

0.081-inch - N/A 76.25 #MJ81-2 

0.082-inch - N/A 76.50 #MJ82-2 


#MJ83-2 


#MJ84-2 

0.085-inch - N/A 78.50 #MJ85-2 


#MJ86-2 


#MJ87-2 

0.088-inch - N/A 80.50 #MJ88-2 



#MJ89-2 

#MJ90-2 

0.091-inch - N/A 82.25 #MJ91-2 

0.092-inch - N/A 82.50 #MJ92-2 





#MJ93-2 

#MJ94-2 

#MJ95-2 

#MJ96-2 

0.097-inch - N/A 86.50 #MJ97-2 


#MJ98-2 

0.099-inch - N/A 87.50 #MJ99-2 




#MJ100-2 

#MJ101-2 

#MJ102-2 

0.103-inch - N/A 90.50 #MJ103-2 


#MJ104-2 

0.105-inch - N/A 91.50 #MJ105-2 


#MJ106-2 

0.107-inch - N/A 92.50 #MJ107-2 


#MJ108-2 

0.109-inch - N/A 93.25 #MJ109-2 

0.110-inch - N/A 93.50 #MJ110-2 




#MJ111-2 

#MJ112-2 

#MJ113-2 

0.114-inch - N/A 96.25 #MJ114-2 

0.115-inch - N/A 96.50 #MJ115-2 


#MJ116-2 


#MJ117-2 


#MJ118-2 

0.119-inch - N/A 99.50 #MJ119-2 

0.120-inch - Holley 100 #MJ120-2 

Alcohol Jets 

0.121-inch Alcohol 

#MJ121-2 


#MJ122-2 


#MJ123-2 


#MJ124-2 


#MJ125-2 


#MJ126-2 


#MJ127-2 


#MJ128-2 


#MJ129-2 


#MJ130-2 


#MJ131-2 


#MJ132-2 


#MJ133-2 


#MJ134-2 


#MJ135-2 


#MJ136-2 


#MJ137-2 


#MJ138-2 


#MJ139-2 


#MJ140-2 

* All jets available in single units. Simply change -2 to -1 

Jet Kits 

MJ50-2 to MJ60-2 

#MJ5060 

MJ61-2 to MJ71-2 

#MJ6171 

MJ72-2 to MJ82-2 

#MJ7282 

MJ83-2 to MJ93-2 

#MJ8393 

MJ94-2 to MJ 104-2 

#MJ94104 

MJ105-2 to MJ115-2 #MJ105115 

MJ116-2 to MJ126-2 #MJ116126 

.070 - .088 Even Jets Only #MJ1000-KIT 

.090 - 108 Even Jets Only #MJ2000-KIT 

Accessories 

Large Storage Box 

#MJ1-5 

Nut Driver 

#MJ1-1 

Holder Plates 

#MJ2-1 

Brass Jet Extension 

#MJEXT-2 

29

Air Flow Enhancement 

The following polymer products are specifically designed and proven 

to increase airflow (CFM) and reduce turbulence. All products are custom 

molded for exact bolt-on fitment. 

#VH303 

Dominator Air Entry 

Radius Plate – 4150 Type 

Radius Insert – 4150 Type 

VH303 

VH304 

VH305 

#VH305 

#VH304 

Terminal Tools 

Weatherpack style terminals offer many significant benefits over 

conventional terminals, including superior resistance to the elements 

and a mechanically secure connection. But without the correct 

tools, they can prove very difficult to assemble and service. 

This series of terminal service tools from FAST is the ideal solution 

for the removal and installation of many types of Weatherpack connectors 

and will provide years of dependable service. 

Yellow Extractor Tool #307065 

Green Extractor Tool #307066 

Crimp Tool #307067 

Wire Stripper #307068 

#307067 

#307068 

#307066 

#307065 

Merchandise 

Check out all of the FAST merchandise – anything from apparel to banners to 

decals! T-shirts are 100% cotton and are available in white or black with a full 

size screen print of the FAST logo on the back. Also available is the FAST hat 

– black twill with red stitching, featuring an embroidered FAST logo across the 

front and www.fuelairspark.com on the adjustable back band. One size fits all. 

Another way to show your support for FAST is by displaying one of our 3' x 8' 

fabric banners in your shop or a decal on your vehicle. 

FAST White T-Shirt (Medium) #30999901 

FAST White T-Shirt (Large) #30999902 

FAST White T-Shirt (XL) #30999903 

FAST White T-Shirt (XXL) #30999904 

FAST Black T-Shirt (Medium) #30999911 

FAST Black T-Shirt (Large) #30999912 

FAST Black T-Shirt (XL) #30999913 

FAST Black T-Shirt (XXL) #30999914 

FAST Black Ball Cap (One Size Fits All) #30999922 

FAST Banner (3' x 8') #30059 

FAST Contingency Decal (12") #30046 

#30999901 

#30999911 

#30059 

#30999922 

30

Frequently Asked Questions 

What are the advantages and differences between the new XFI unit and my older style “classic” FAST system? 

The XFI computer processor is four times faster than the “classic” system, allowing it to control more features simultaneously. The new XFI system uses a 104 

pin wire harness versus a 60 pin wire harness on the “classic” system; again, these additional pins allow more features and devices to be controlled by the XFI . 

Additionally, performance features that had to be purchased separately with the “classic” FAST system are now included with XFI at no additional cost. Just 

click on the features you want to control in the included tuning software, i.e. four stage power adder control, boost control, traction control, etc. The XFI can also 

be run in either batch fire or sequential mode. If you choose sequential mode, you will automatically have individual cylinder control of both spark and fuel. 

Can my older “classic” FAST system be upgraded to an XFI ? 

Due to design differences, the “classic” FAST system cannot be upgraded to an XFI . You will be required to purchase both a new ECU and wiring harness. 

With the new XFI system, do I need a separate data logger? 

The XFI can be purchased with or without Internal Data Logging (See page 5). If purchased without the data logging feature, the XFI will record to a laptop when 

connected. FAST also offers an easy-to-use external data logger that simply plugs into the XFI . The external data logger will record up to one hour of data and 

does not require the use of a laptop (See page 9). 

I have an XFI but I would like to have some of the newer options such as Internal Data Logging and/or Intelligent Traction 

Control . Can I add these options to my existing XFI ECU? 

The answer is yes. Internal Data Logging can be added as a download via e-mail, or FAST can send a CD with the necessary option file. To upgrade an existing 

XFI to Intelligent Traction Control , you will need to send in the ECU, and FAST will upgrade it with the option file and a new billet enclosure that clearly identifies 

the ECU as having this option. You must call first and obtain a Return Authorization Number before sending an ECU in for this upgrade. For more information 

about either of these upgrade options, see pages 5 and 6 of this catalog, call us at 1-877-334-8355 or email us at tech@fuelairspark.com. 

Can I have my XFI upgraded to ITC (Intelligent Traction Control ) without changing the enclosure? 

Each and every XFI that has the ITC option must be in a black billet ITC enclosure. In addition to this, there is an ITC-specific LED sequence that appears at key 

on. This allows tech officials to identify an ECU with the Intelligent Traction Control option. 

Is Intelligent Traction Control legal in my class 

ITC is not legal in all sanctioning bodies/classes. It is the user’s responsibility to check with his or her sanctioning body to make sure that an electronic traction 

control device is legal in competition. 

What hardware is required to use the Intelligent Traction Control ? 

The only device required to take advantage of our ITC technology is a driveshaft speed sensor. See page 7 of this catalog for driveshaft speed sensor kits. 

What’s the difference between “batch firing” or “bank-to-bank” vs. “sequential” systems? Which do I need? 

Batch fire systems fire all the injectors simultaneously. Bank-to-bank systems fire the fuel injectors in “banks”; half of them fire on one engine revolution and 

the other half fire the next engine revolution. A sequential system fires the fuel injector for each individual cylinder in the firing order of the engine. In most cases, 

bank firing will be fine, but if you’re using an extremely radical camshaft, high boost, or over 600 horsepower, you might find sequential to be a slightly better fit. 

It will usually make marginally more power and help some radical engines idle better. 

Don’t see your question here? 

Call our EFI HELP line or email us at tech@fuelairspark.com to speak 

with a FAST technician to answer any questions you may have. 

Learn. Share. Experience. 

To stay informed about the newest FAST products, view install videos, 

read customer reviews and keep up with the latest news from the automotive 

industry, visit www.cpgnation.com. 

31

Glossary 

CAN - Controller Area Network 

An electronic hardware standard that permits simplified, high speed interfacing between electronic control units in a vehicle environment. For example, the FAST XFI 

system can communicate with the FAST Transmission Controller through the use of its CAN bus. 

ECU - Engine Control Unit 

A vehicle-mounted engine control computer that varies engine behavior such as fuel injector activity, idle speed, air/fuel ratio, ignition timing, etc. based on input from 

an array of sensors including O 2 , TPS, and others. 

EFI - Electronic Fuel Injection 

A means of injecting fuel into the intake manifold of an internal-combustion engine using various types of fuel injectors that are controlled by an ECU (see below). EFI 

takes many forms, including throttle body injection (TBI) where a carburetor-like throttle body houses the injector(s), and port injection, where rail-mounted fuel injectors 

feed into each runner of the engine intake manifold. 

MAP - Manifold Absolute Pressure 

An engine sensor that measures intake manifold vacuum. Generally measured in bars, MAP data is used to measure engine load, which in turn allows the ECU to regulate 

engine behavior such as fuel supply and air/fuel ratio. 

O 2 - Oxygen 

Commonly used either as a shorthand term for an oxygen sensor or to describe oxygen as it is measured in engine exhaust gases. O 2 data is primarily used by an ECU for 

the purpose of regulating the engine air/fuel ratio. 

TCU - Transmission Control Unit 

A vehicle-mounted transmission control computer that varies transmission behavior such as shift points, shift firmness, downshifting and torque converter lockup based 

on engine load, vehicle speed and other variables. 

TPS - Throttle Position Sensor 

An electronic sensor, generally mechanically linked to the throttle body of an EFI engine for the purpose of measuring how far the throttle is opened when the vehicle 

operator steps on the vehicle throttle pedal. Throttle position data is generally expressed in terms of percentage and plays an important role in many ECU functions, not to 

mention determining when power adders such as nitrous are deployed. 

VATS - Vehicle Anti-Theft System 

An anti-theft circuit built into most GM fuel injection ECUs made after 1989. VATS must be bypassed with a special chip in order for some EFI engines to run when swapped 

from one vehicle to another. 

VSS - Vehicle Speed Sensor 

An electronic speed sensor, generally mounted in the output shaft housing of a transmission (a VSS may also be mounted at a wheel or other location). VSS data is used 

by both ECUs and TCUs for a variety of purposes, including torque converter lockup, downshifting, etc. 

Also See Inglese.com 

For Nostalgic Looking EFI Packages 

The Inglese EFI Induction Systems may look like classic Weber induction, but 

this highly advanced system delivers performance that is capable of supporting 

up to 1000 hp engines and allows a much broader camshaft selection. Inglese 

uses advanced FAST XFI electronics and FAST Precision-Flow Fuel Injectors 

(GM LS7 type) that are integrated into cast aluminum 50mm IDA style throttle 

bodies. Inglese EFI systems are designed to work with FAST Dual-Sync Distributors 

to ensure an easy and trouble-free installation and setup. This amazing 

system is engineered to deliver reliable service under normal heat environments 

and avoid the common linkage binding found with many inferior systems. 

* Pictured 

NG4007/4008 

32

Limited Warranty 

Fuel Air Spark Technology (FAST ) warrants that all of its products are free from defects in material and workmanship, for a period of one year. The warranty 

period begins from the date of purchase. We recommend that you keep your invoice or receipt because proof of purchase date is required. 

This limited warranty shall only cover the original purchaser. 

The warranty does not include the following: 

A. Any product that has been physically altered, improperly installed or maintained. 

B. Any product used in an improper application, abused or not used in connection with the proper parts. 

C. Any product that is defective due to neglect, unauthorized repair or as the result of an accident. 

There is no implied warranty of merchantability or fitness for a particular purpose. The FAST obligation under this warranty is limited to the repair or replacement 

of its products. There are no warranties that extend beyond the description on the face of this warranty. FAST will not be responsible for incidental, 

consequential, indirect, special or exemplary damages or any third-party claims or property damage or personal damages resulting from use of its products. If 

there is by law an implied warranty of merchantability and/or fitness, it is limited to the warranty terms set forth above. 

This limited warranty gives you specific legal rights, and you may have other legal rights which vary from state to state or country to country. 

Making a Warranty Claim 

A. Contact FAST within the warranty period at 3400 Democrat Rd, Memphis, TN 38118 or by phone at (901) 260-3278 Monday - Friday 8:00 a.m. to 5:00 p.m. 

CST. Before any merchandise is returned for warranty, please contact FAST to obtain a Return Material Authorization (RMA). FAST will need a specific and 

detailed description of your problem, along with the type of product and information about you for contact purposes. 

B. Send the merchandise, freight prepaid and insured to FAST at the address below, along with dated proof of purchase. All merchandise returned for warranty 

must be accompanied by an RMA. The purchaser must prepay transportation charges for return of defective parts. FAST is not liable for any taxes or duties 

associated with international shipments. 

FAST 

3400 Democrat Road 

Memphis, TN 38118 

FAST is a proud member of the COMP Performance Group family. 

Other CPG companies include: 

compcams.com 

1.800.999.0853 

tciauto.com 

1.888.776.9824 

racingheadservice.com 

1.877.776.4323 

zex.com 

1.888.817.1008 

inglese.com 

1.866.450.8089 

powerhouseproducts.com 

1.800.872.7223 

quartermasterusa.com 

1.888.258.8241 

proracingsim.com 

901.259.2355 

www.compperformancegroup.com

No matter if your application is street, 

race, or marine, FAST has the products 

and technical assistance to put the 

latest in fuel injection engineering and 

technology into your engine compartment. 

With technical assistance that is 

beyond comparison, FAST has been 

able to build close relationships with 

customers, many of which have helped 

our Research & Development team stay 

on top. With a complete line of easyto-use 

products, FAST is committed 

to bringing the best EFI experience to 

both racers and street enthusiasts everywhere 

with superior EFI systems, 

intake manifolds, throttle bodies and 

other EFI components. 

AVAILABLE @: 


F2009-1 

© Copyright 2009 by COMP Performance Group 

FAST 

3400 Democrat Rd • Memphis, TN 38118 

901.260.3278 • EFI HELP 1.877.334.8355 

FAX: 901.366.1807

PRoduct catalog - Rev's Engineering

Create successful ePaper yourself

Delete template?

Save as template?