04.11.2013 Views

IEA Solar Heating and Cooling Programm - NachhaltigWirtschaften.at

IEA Solar Heating and Cooling Programm - NachhaltigWirtschaften.at

IEA Solar Heating and Cooling Programm - NachhaltigWirtschaften.at

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>IEA</strong> SHC Task 38 <strong>Solar</strong> Air Conditioning <strong>and</strong> Refriger<strong>at</strong>ion Subtask A Report, D<strong>at</strong>e: November 2010<br />

All in all nine auxiliary pumps as well as five distribution pumps are installed in the system.<br />

To control the plant two Technische Altern<strong>at</strong>ive (TA) UVR1611 controllers are included. The<br />

monitoring task is done by separ<strong>at</strong>e devices installed by the company RKG.<br />

This system design was chosen because of the easy <strong>and</strong> cheap integr<strong>at</strong>ion feasibility in the<br />

solar combi system. The solar system <strong>and</strong> even the cold distribution system were there<br />

anyway, only the cold production had to be added.<br />

The main problems encountered were caused by the solar system. It was designed originally<br />

as a low-flow-system. To drive the absorption chiller higher volume flows are necessary to<br />

reach the nominal power. Therefore the pumps of the solar pumping st<strong>at</strong>ion had to be<br />

changed <strong>and</strong> the loading str<strong>at</strong>egy for the buffer tanks had to be optimized.<br />

Figure 3: View of the utility room [upper left, Bachler], the outside situ<strong>at</strong>ion with the wet<br />

cooling tower <strong>and</strong> the absorption machine [upper right, Bachler] <strong>and</strong> the inside of the cooling<br />

machine [lower left / right, Pink]<br />

page 5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!