TATRAMAT - ohrievače vody, s.r.o. - META-GAS spol.sro
TATRAMAT - ohrievače vody, s.r.o. - META-GAS spol.sro
TATRAMAT - ohrievače vody, s.r.o. - META-GAS spol.sro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
English<br />
Limescale also acts like this on the pipe in which the thermostat and temperature fuse sensors are located, causing the<br />
real temperature in the heater to be higher than the adjusted temperature. For this reason it is necessary to remove<br />
limescale once every two years at least, or more often. For limescale removal, no acid-based substances should be used.<br />
The heater is connected to 230 V AC, a voltage value dangerous to life. In the event of nonprofessional<br />
intervention a fatal electrical accident can result. Trust your servicing specialist to<br />
perform boiler cleaning and anode rod replacement.<br />
14. SERVICE<br />
Tatramat brand water heaters are designed and assembled with extraordinary care. They leave the manufacturing plant<br />
after passing an entire series of laboratory tests. If, in spite of this a failure appears to shut down the heater's electric<br />
feeder, stop the water supply and contact the nearest service centre.<br />
Only an employee trained by the manufacturer can perform warranty service and repairs. It is<br />
dangerous for any other person to tamper with the heater's interior.<br />
15.<br />
POSSIBLE FAULTS AND FAILURE CAUSES<br />
Water is cold<br />
Water is cold<br />
Lukewarm water (does not<br />
correspond to temperature set on<br />
thermostat)<br />
water heating takes a long time<br />
water drips steadily from<br />
the safety valve<br />
signal lamp is on<br />
signal lamp is off<br />
signal lamp is on<br />
signal lamp is on<br />
signal lamp is off<br />
low thermostat temperature<br />
heating element failure<br />
electric supply missingoutside heater<br />
thermostat failure<br />
electric supply switched<br />
off by thermal fuse<br />
thermostat breakdown<br />
heating element covered<br />
by limescale<br />
high water input pressure<br />
safety valve breakdown<br />
By observing the instructions given in the manual herein and with product correct installation, operation and maintenance<br />
we can guarantee that the product will maintain all the technical properties specified by the corresponding technical<br />
conditions throughout its life time. If any defect occurs with the product that is not caused by the user or by an unavoidable<br />
incident (such as damage caused by a disaster) during the warranty period, the client's product will be repaired free of<br />
charge. The product replacement or withdrawal from of sales agreement is governed by the regulations of the Civil Code.<br />
The heater manufacturer does not provide a guarantee for damage caused by incorrect installation and connection or by<br />
incorrect operation or maintenance.<br />
Warranty validity:<br />
The product warranty term is granted to the final client beginning upon the sales day (or from the commissioning day) for a<br />
period of:<br />
-<br />
-<br />
16.<br />
WARRANTY<br />
5 years for an enamel boiler<br />
24 months for all other parts and product accessories<br />
The warranty term is prolonged by the time necessary for servicing, if any, performed during the warranty term.<br />
Warranty application conditions:<br />
-<br />
-<br />
Warranty certificate filled in correctly, containing the sales date, signature, shop stamp or indicating the<br />
installation date, signature and stamp of the agency shop on heater commissioning (on client's invoice)<br />
carefully preserved bill/invoice, delivery list or other proof of purchase<br />
The manufacturer does not take any responsibility for problems caused by poor water quality or<br />
water hardness. Limescale removal is not a subject of warranty repair.<br />
33