Joints - FLUITEN-VIKOV, s. r. o.

EXTERNAL SPRINGS
Fluids that are highly viscous or contain
solid particles can produce clogging of
the seal springs. Externally mounted
seal springs which are not in contact
with the fluid make these joints suitable
to operate with any type of fluid.
LOW FRICTION TORQUE
The balanced seal design minimizes
values of friction torque at increasing
pressure. The diagram on right shows,
for all Rotary Joints sizes, measured
values of friction torque with water.
THE MECHANICAL SEAL: THE HEART
OF EVERY JOINT
Fluiten has been manifacturing
mechanical seals for any kind of
applications for 40 years, developing
an extensive knowledge of all issues
related to the design and production of
mechanical seals.
Fluiten has successfully challenged high
pressures, sliding speeds of 10 m/s
and more.
The range of products dealt with goes
from water, oil, and lubricants to
foodstuffs such as jam or honey, and
pharmaceuticals such as injectables
and antibiotics, for which no emission
are required.
The continuous growth of first installation
seals sales highlights Fluiten’s success
and is the best guarantee for our
customers.
2
1
In R type rotary joints, the seal substitution can be carried out
without dismounting the joint from its application. This is possible
by means of our “Quick Replacement Device”. It is sufficient to remove
the blocking screws (1) and separate the body to substitute the two
seal rings (2) and the O-rings. It is thus possible to quickly adapt
the joint to fluids requiring different sealing materials; in view of such
event we have prepared replacements kits comprising two seal rings,
O-ring gaskets and a series of springs.
Friction torque [N*m]
Friction torque [N*m]
70,000
60,000
50,000
40,000
30,000
20,000
10,000
0,000
R064
R076
2,5
ROTARY JOINTS TYPE R009-R050 - FRICTION TORQUE - FLUID : WATER
Pressure[bar]
ROTARY JOINTS TYPE R064-150 - FRICTION TORQUE - FLUID : WATER
R089
R102
5
R125
R150
7,5
10
12,5
15
Pressure[bar]
17,5
20
22,5
25