Joints - FLUITEN-VIKOV, s. r. o.

More documents

Recommendations

Info

Seal on atmosphere side Thermal insulation to reduce energy losses Cooling fluid creates a barrier against the process temperature Flanged connections according to DIN, ANSI or other standards Type RHB Cooling and pressurisation circuit (Hydraulic pack LHF) <strong>Joints</strong> type RB/RHB are designed to work at the contemporaneous presence of temperatures of 400C and high rotation speeds. Such performances can be reached by using two special seals, with double balancing and with the interposition of a pressurised fluid for the cooling of the primary seal. This fluid is circulated by a pumping and cooling group that continuously verifies the system’s effectiveness, and signals through visual and sound alarms, possible variations from the set values. The above results are reached by using ball bearings with closed loop oil cooling. Oil sealing is obtained by two double balanced seals that guarantee the effectiveness of the system even in case of an electrical failure. Double mechanical seals with pressurised barrier fluid avoid any leakage of the process fluid to the atmosphere; in a worst case event, the barrier fluid will leak into the process. Such double mechanical seal systems have been manufactured and installed in chemical, petrochemical and pharmaceutical applications by Fluiten since 1972. Special design roller bearings suitable for high temperature. Easy installation on rotary joint Rotary joint housing in special stainless steel SPEED ROTATION [rpm] 3000 2500 2000 1500 1000 500 Double balancing seal on process side Joint Type RB/RHB: Speed vs. Nominal Diameter Diagram 0 20 30 50 20 80 95 110 125 140 155 170 185 200 NOMINAL DIAMETER [mm]
Circuit temperature indicator Oil return from rotary joint Heat exchanger Oil level switch Oil level indicator Temperature alarm Relief valve Pressure switch/ transducer Cooling water inlet Cooling water outlet Circuit pressure gauge Drain Circulation pump driven by electric motor Reservoir Flow switch Oil supply to rotary joint
Page 2: Johnson-Fluiten ROTARY JOINTS: The
Page 5 and 6: EXTERNAL SPRINGS Fluids that are hi
Page 7 and 8: SYPHON SUPPLIED BY THE CUSTOMER T A
Page 9 and 10: M T A G R125 - R150 AVAILABLE ONLY
Page 11: MODEL R-RH 019 R-RH 025 R-RH 031 R-
Page 15 and 16: HB HIGH TEMPERATURE CONFIGURATIONS:

Joints - FLUITEN-VIKOV, s. r. o.

Create successful ePaper yourself

Delete template?

Save as template?