Diamond stone saw - FLEX

Cutting-edge
FLEX Diamond stone saw for wet cuts.

Diamond stone saw CS 60 WET
FLEX and natural stone.
A special relationship.
Natural stone has its own laws. That call for special experts. Specialists who know
how to read the stone. Who by the nuances and shades of the colours in the stone
can recognise the unique masterpiece that a completely sculptured piece of work
can evolve, but to realize this vision good tools are needed.
Since 90 years FLEX is the competent and innovative partner for working with
natural stone. Over this course of time a comprehensive range of machines has
been developed in close co-operation with experienced stone masons. A product
range that sets the industry standards for robustness and reliability also with
handling and maintenance but especially by working safety when using water.
The long-time competence of FLEX also includes the knowledge that FLEX
engineers have gained about the nature of stone, its characteristics, and its
sensitivities. That is why a FLEX machine of course does not damage or soil the
valuable “natural stone”, but professionally processes and preserves it. As in
every perfect relationship allows you to work to perfection.

Diamond stone saw CS 60 WET
The FLEX PRCD safety switch ensures electrical safety
when undertaking wet sanding. Is released practically
immediately (< 15 milliseconds)at the required
response sensitivity. Complete with accidental
restart safeguard on the power being interrupted.
The contour plug is standard equipment on many
wet grinders. It can be plugged only into the
isolation transformer and not into the power outlet.
The extensive FLEX natural stone range provides
everything - from pressurized water tank, isolating
transformers and safety vacuum cleaners to
grinding discs, abrasive rings and diamond tools.
You don‘t have to search long when selecting the
required grain with the Velcro diamond discs. Thanks
to the colour-coded system you can identify the different
grains just by their colour. And the practical
Velcro attachment allows for speedy replacement.
3

CS 60 WET. Diamond stone saw for wet cuts.
Diamond stone saw CS 60 WET
The new CS 60 WET is a further development of the proven CSW 4161. With the new CS 60 WET you can not only cut cleanly and precisely,
you can also make a perfect mitre cut in the range from 0-45°. It also has a cutting depth adjustment from 0-60 mm (with a
guide rail of 0-54 mm) and as a consequence is optimally suited to applying weather grooves and water drainage grooves to window
sills or stair treads.
The CS 60 WET is the ideal machine for exact cuts in natural and artificial stone by stonemasons, kitchen and shop-fitters, tilers as
well as in gardening and landscaping.
Powerful, tough 1400 watt motor
with high torque. Motor protection
made of rubber prevents the direct
intake of spray water and therefore
protects the motor.
Easy tool change due to built-in
spindle stop.
Parallel stop with guide edge mounted
upward increases the saw table
contact surface. With the guide
edge mounted downward, a cut
parallel to the workpiece edge is
possible.
The gearbox housing, the protective
cover as well as the guide plate are
made of high-quality magnesium
die-castings. Ideal for tough applications,
e.g. in gardening and
landscaping.
Quick coupling made of brass for
easy connection of a ½“ water hose.
The cutting depth can be adjusted
infinitely and without the need for
tools. Ideal in conjunction with
the guide rail for applying weather
grooves and water drainage
grooves.
Portable residual current device
(PRCD) integrated into the cable for
safe working.
Markings on the guide table for cuts
at 0°/30°/45° for quick orientation.
The scale fitted permits easy and
exact angle adjustment from 0-45°.
The front handle also aids the exact
guiding of the machine.
Specially designed water feed for
optimal cooling of the diamond
tool.
Ergonomically shaped handle with
on/off switch and locking for
continuous operation.
5

Diamond stone separator for wet cuts, mitre cuts
up to 45 °, with GFCI operator
• High-performance motor: extra powerful for stone cutting
and joint milling
• Continuous cut depth setting from 0-60 mm, with rail guide up to
54 mm. In the mitre cut from 0-44 mm, with guide rail up to 38 mm
• Continuous angle adjustment for mitre cuts from 0-45°
• Cut marking at the base plate from 0°/30°/45° for rapid orienta-tion
• High-quality magnesium die-castings for protective cover
and base plates
• Motor protection made of rubber prevents the direct intake
of spray water
• Water supply: for an effective cooling of the diamond blade
• Quick-fit brass coupling: for 1/2“ water hose
• GFCI operator protector circuit breaker: integrated in cord
• Ideal for: Inserting water grooves in window sills or steps, work tops,
facade slabs, terazzo slabs in garden design & landscaping, joint
renovation in the floor
SpECIFICATIonS
Diamond cutting disc Ø / arbor
(inside Ø)
170 / 22,2 mm
Cutting depth / with guide
fence
60 / 54 mm
Mitre cuttings 0-45°
Depth of cut - mitre cut 5-44 mm
Depth of cut - mitre cut with
guide rail
0-38 mm
No load speed 6200 rpm
Power input 1400 watt
Power output 840 watt
Weight 4,5 kg
Typ order no.
CS 60 WET PRCD 374.016
Standard equipment:
1 diamond cutting disc with
segmented cutting edge
1 wrench for saw blade change
1 parallel guide fence
1 plastic system case
1 case insert
Diamond cutting disc
Guide rail GRS
Diamond stone saw CS 60 WET
With turbo segments for a clean wet cut; suitable for tiles and
fine stoneware of any thickness up to hardness 5, marble, slate,
granite and natural stone.
Type Dimensions
in mm
VE order
number
Turbo-F-Jet D170x22,2 170 Ø x 22,2 1 386.189
With segmented cutting edge, vibration-dampened. For granite,
marble,sandstone, concrete.
Dimensions
in mm
VE order
number
170 Ø x 22,2 1 347.515
With closed cutting edge for a clean wet-cut, suitable for
tiles, marble plates and ceramics.
Dimensions
in mm
Connector for guide rail GRS
VE order
number
170 Ø x 22,2 1 367.214
Precise aluminium profile with anodized sliding coating and
guide rib.. Plugged rubber lip as contact edge at the marking,
anti slip protection on the bottom. Connector 353.272 can be
used to extend the guide rails as required.
Typ Dimensions
in mm
Spare parts for guide rail GRS 80/160
Qp order
no.
GRS 80 800 1 353.280
GRS 160 1600 1 359.351
Precise metal connector for connecting two guide rails GRS.
When not in use, the connector can be parked in the guide rail
with the included tool wrench SW 5 - screw driver.
Qp order
no.
1 353.272
Qp order
no.
End caps 2 364.967
Antislip profile 6,8 m 366.854
Anti-splinter guard 3,4 m 366.846
plastic system case
Insert for systainer
Systainer with insert for machine and accessories.
Qp order
no.
1 353.302
Insert for CSW 4161 or CS 60 WET and accessories, suitable for
systainer 353.302.
Qp order
no.
1 353.310
7

Diamond stone saw CS 60 WET
Extremely free-cutting. For best results.
The extremely rugged and reliable CS 60 WET is ideal for cutting window
sills, work surfaces, facing stones and terrazzo slabs in garden and landscaping,
and cleaning up flooring joints.
In contrast to heavy stationary machines, the CS 60 WET is characterised
by simple handling.
The CS 60 WET, in conjunction with the guide
rail, is ideal for inserting weather grooves or
water drainage channels in window sills or on
the tops of walls.
8
As the parallel stop is included in the product
package, exact cuts can be made even without
the aid of a guide rail.
Long cuts can be made with the CS 60 WET and the appropriate guide rail
Maximum flexibility. If there is no direct water connection available, the
FLEX water pressure tank WD 10 is the ideal addition.
Thanks to the precise parallel stop which can
be attached on either side, the CS 60 WET can
also make a negative mitre cut.

Diamond stone saw for mitre cuts.
Diamond stone saw CS 60 WET
With the FLEX CS 60 WET diamond stone cutter you cannot only cut cleanly and precisely, you can also make a perfect mitre cut in the range from
0-45°.
The guide rail, available as an accessory, can be used to cut clean and
precise edge trims in the floor area.
The stepless cutting depth adjustment from 0-60 mm (with guide rail
0-54 mm) is particularly suitable for inserting expansion joints.
9

Stone working
pressurized water tank 10l
WD 10
• Working pressure 6 bar
• Ideal for mobile working
• Fits all machines with a quick-fit coupling for a ½“ water hose
Standard Equipment: 4 m pressure hose
Anchor drilling unit
with integrated water feed
BED 18
• VR electronic control: with tachogenerator constant speed control, overload
protection, and speed selector wheel
• Suction cup for fixing to smooth surfaces
• Precise drill centring by accurate positioning with cross-hair registration marks
• Quick-fit brass coupling: for 1/2“ water hose
• Adapter for vacuum extraction
• Ideal for hard, fragile materials, including porcelain stoneware tiles, concrete,
stone and masonry
• When using FLEX industrial vacuums to extract drilling sludge, an additional
vacuum is created to allow vacuum fastening of the drill stand
• Integrated water feed through the drive shaft
• GFCI operator protector circuit breaker: integrated in cord
Standard Equipment: 1 suction cup, 1 bail handle, 1 stationary drill stand with
column guide, BD 18, 1 vacuum hose connection, 1 sharpening stone, 1 metal
carrying case
10
Wet stone grinder
LE 12-3 100 WET pRCD
• Powerful 1150 W motor
• VR full-wave electronic control: tachogenerator constant speed control, soft
start, overload protection and speed selection
• High torque for maximum material removal and optimum surface quality
• Powder-coated and varnished magnetic pad for a long service life, thanks to
the additional protection against wear and abrasive dust
• Grip hood for easy handling and precise working
• Bail handle: Secure grip, even when working on vertical surfaces
• The new water feed and control system is located below the housing, which
makes operation and precise dosing easy. An unobstructed grip area is
provided directly above the backing pad
• 2 m special hose: No additional hose safety devices required. Increases
flexibility, reduces weight and prevents risk of injury from hose clips
• Quick-fit brass coupling: for 1/2“ water hose
• GFCI operator protector circuit breaker: integrated in cord
• Spindle lock
Standard Equipment: 1 bail handle, 1 velcro cable holder

Concrete grinding machine
LD 1709 FR
• FR electronic control: with tachogenerator constant speed control, soft
start, overload protection and temperature monitoring
• Vacuum dust collection: protects against abrasive dust, reduces disc wear,
keeps concrete pores for the new coat open
• Flexible rubber vacuum ring with low-wear metal ring: moves smoothly over
the surface and protects against dust and flying stones
• Vacuum attachment: 32 mm exterior Ø
• Spindle lock
• Ideal for point work and large-area stripping
• Suction hose not included in delivery package
Standard Equipment: 1 clamping nut M14, clamping flange SW 14, guard,
bail handle, cable clip (3x), hose clip, vacuum ring, vacuum hose extension, 1
adapter 32/36 mm Ø, 1 hexagon socket screw key, wrench 4, wrench holder, 1
metal carrying case
Grinding machine
LDC 1709 FR
• FR electronic control: with tachogenerator constant speed control, soft
start, overload protection and temperature monitoring
• Vacuum dust collection: protects against abrasive dust, reduces disc wear,
keeps concrete pores for the new coat open
• Spindle lock
• Guard with pivoting segment to allow grinding right up to the wall. Height-
adjustable to the disc height and for optimum dust extraction
Standard Equipment: guard with pivoting edge segment, 1 SoftVib handle,
cable clips, hose clip, wrench holder, 1 clamping nut M14, 1 clamping flange
SW14, 1 hexagon socket screw key, wrench 4, 1 vacuum adapter, vacuum hose
extension, 1 pin wrench, 1 metal carrying case
Universal tool RETECFLEX
RE 14-5 115
Stone working
• VR microprocessor control: speed selection, tachogenerator constant speed
control, soft start, restart protection after power failure, overload protection
and temperature monitoring
• Motor: powerful, strong motor for quick working progress
• With damping element between spindle and tool being used: this reduces
vibration, aids for smooth running, improves guidance and increases the
service life of the machine
• Completely cast electronic components prevents damage due to metal dust.
The 3-fold winding protection reduces motor wear, increases service life
• Special gearbox: special gear ratio for high torque in the medium and low
speed range
• Dust-proof on/off switch
• Effective dust extraction thanks to a large extraction cross-section. Simple,
rapid connection using the FLEX clip system. No adapters or reducing sleeves
are required
• Vacuum guard: with stepless height adjustment
• Universal tool system can be adapted for a large number of renovation and
modernisation applications. Compact, handy and ideal for working on small
surfaces and on the edges of larger areas
• Spindle lock
Standard Equipment: 1 SoftVib handle, 1 extractor guard grinding Ø 115 mm
with a brush ring, 1 adjustable base scouring Ø 80 mm, 1 velcro backing pad Bowl
Ø 115/M14, Corundum sanding disc set Ø 115, 1 case insert, 1 plastic carry case, 1
pin wrench, 1 hexagon socket screw key, wrench 4
11

www.flex-tools.com
FLEX. The original.
Your specialist retailer
This means performance: the high-speed
angle grinder – a FLEX invention
Since 90 years, Stuttgart-based FLEX has been known as a manufacturer of highquality
power tools. This is one of the secrets of our success: We are closely aligned
with the requirements of craftsmen. This results in products that are famous for their
long service life, performance and high functionality in many industries.
For more, see www.flex-tools.com
For more information about diamond
stone cutters and all other FLEX products
please contact your competent
FLEX retailer or www.flex-tools.com!
For exact directions, contact us
per phone +49 (0) 7144 828-0 or
by email: info@flex-tools.com
FLEX-Elektrowerkzeuge GmbH, Bahnhofstraße 15, 71711 Steinheim, Germany. Phone + 49 (0) 7144 828-0, Fax + 49 (0) 7144 258-99, www.flex-tools.com
01-2012 / The fittings of the machines correspond to the usual standard equipment. Technical specifications
are subject to change without prior notice. FLEX accepts no responsibility for mistakes and printing errors.