programme simultaneous with miNaT trade fair New STuTTgarT ...

www.minat-messe.de
programme
simultaneous with miNaT trade fair
industry - Science dialogue
Conceptual sponsor
New STuTTgarT Trade Fair CeNTre i 07 – 09 oCTober 2008

Concurrent with MiNaT, the international trade fair for precision engineering
and ultra-precision, micro and nano technologies, representatives from
industry and science and the visitors will meet at the MiNaT Hot Spots to
discuss current questions regarding micro and nano technology.
Tuesday, 07 October 2008, hall 2
10:00
–
11:00
greetings
opeNiNg CeremoNy
Ulrich Kromer von Baerle CEO, Landesmesse Stuttgart GmbH
Hans Hartmann Pedersen European Commission, Directorate-General for Research,
Directorate G Industrial Technologies
The MiNaT Hot Spots talks will be presented in the rooms of the adjacent
congress centre ICS. The contents of the Hot Spots were organised under
the lead management of VDMA Micro Technology which is, at the same
time, the conceptual sponsor of MiNaT.
MinDir. Klaus Tappeser Ministry of Science, Research and the Arts in the State of Baden-Württemberg
Joachim Rohwedder CEO Rohwedder AG and Vicepresident of VDMA
opening
MinDir. Dr. Wolf-Dieter Lukas Federal Ministry of Education and Research (BMBF),
Head of the department 5 “Key Technologies – Research for Innovation”
Coffeebreak
THe FUTURe is noW!
international trade fair for precision mechanics,
ultraprecision, micro and nano technologies
www.minat-messe.de

Tuesday, 07 October 2008
european Technology platform for
micro- and Nano-manufacturing
miNam i
11:30
–
12:30
14:00
–
15:00
15:30
–
16:30
Chair: Hans-Hartmann Pedersen,
european Commission, RTD/G2,
Brussels, Belgium
Welcome to European Technology
Platform for Micro- and Nano
Manufacturing (MINAM)
Dr. Udo Gommel, Fraunhofer Gesellschaft
IPA, Stuttgart, Germany
From Micro-Electro-Mechanical
Systems (MEMS) to Smart System
Integration
Dr. Stefan Finkbeiner, Robert Bosch
GmbH, Reutlingen, Germany
Micro- and Nanomanufacturing
opportunities for sustainable mobility
Dr. Vito Lambertini, Fiat Research Centre,
Orbassano, Italy
Lunch
Chair: Prof. stefan Dimov, Cardiff
University, Cardiff, United Kingdom
Manufacturing of Nanomaterials
for tailored micro/macro products
Prof. Paolo Matteazzi, MBN
Nanomaterialia SpA, Vascon di
Carbonera (TV), Venice Area, Italy
Needs for and status of
standardization for nanotechnologies
Dr. Peter Hatto, IonBond Ltd,
Consett, Co Durham, United Kingdom
Integrated process technology for
multifunctional nanomaterials
Prof. Dr. Bernd Sachweh, BASF SE,
Ludwigshafen, Germany
Coffeebreak
miNam iii
Chair: Prof. Paolo Matteazzi, MBn
nanomaterialia spA (MinAM
Chairman), Vascon di Carbonera
(TV), Venice Area, italy
Advanced 3D TSV Through Silicon Vias
Micro Manufacturing
Augustin Schervan, ASM Assembly
Products, BC Bilthoven,
The Netherlands
High performance Microoptics: From
single Application to high Volume
Dr. Klaus-Friedrich Beckstette,
Carl Zeiss AG, Oberkochen, Germany
Future aspects of Micro
Manufacturing
Prof. Volker Saile, Forschungszentrum
Karlsruhe GmbH, Karlsruhe, Germany
New applications and products in
precision, ultraprecision and micro
manufacturing i
Chair: Prof. Volker saile
University of Karlsruhe (TH) and
Forschungszentrum Karlsruhe GmbH
Company Talks
Ultra-precision machining of optical
and micro mechanical components
Till Kugler, Kugler GmbH, Salem
High power picosecond lasers as
enabling technology for industrial
micro-processing
Dr. Sascha Weiler, TRUMPF
Laser GmbH + Co. KG, Schramberg
Inductive SuperShorties – New
possibilities in Sensor Technology
Martin Kurz, Balluff GmbH,
Neuhausen a.d.F.
Lunch
miNam ii New applications and products ii
Talks presented by scientists
Talks presented by companies
Workshops
Room C 4.1 Room C 4.2 Room C 4.3
11:30
–
12:30
14:00
–
15:00
Company Talks:
Monocrystal diamond – a high
performance material for micro
structure and mirror surfaces
Peter Feuchter, Mößner GmbH,
Pforzheim
Successful transfer from R&D to
production: Concepts and Examples
Dr. Thomas Link,
MicroMountains Applications AG,
Villingen-Schwenningen
Photos: MicroMountains Applications
11:30
–
12:30
14:00
–
15:00
15:30
–
16:30
bmbF Leitinnovation
micro Fuel Cells i
Chair: Ute Ackermann,
VDi/VDe-iT GmbH, Berlin
Welcome & overview
BMBF-Leitinnovation Micro Fuel Cells
Carmen Gehring, Federal Ministry of
Education and Research (BMBF)
Latest research questions
on micro fuel cells
Prof. Dr. Werner Tillmetz, Zentrum
für Wasserstoff- und Sonnenenergieforschung,
Ulm
Micro Methanol systems
Vapour-Fed Direct Methanol Fuel Cells
(DDMFC)
Dr. Alexander Dyck, FWB Kunststofftechnik
GmbH, Pirmasens
Commercializing portable fuel cell
power (20WDMFC)
Dr. Verena Graf,
SFC Smart Fuel Cell AG, Brunnthal
Lunch
bmbF Leitinnovation
micro Fuel Cells ii
Low Temperature Cofired Ceramics as
Microsystem Technology for Fuel Cells
(myPower)
Dr. Uwe Partsch,
Fraunhofer-IKTS, Dresden
High Temperature PEM fuel cells based
on reforming of methanol (MicroPower)
Dr. Isabel Kundler,
BASF Fuel Cell GmbH, Frankfurt a.M.
Development of a fuel cell system
based on the steam reforming of
methanol and a HTPEM
fuel cell (MIMEMIZ)
Dr. Stephan Köhne, Gesellschaft
für Energieverfahrenstechnik mbH,
Herzogenrath
Micro Hydrogen systems
PEM Fuel Cells with hydrogen micro
generator (PemGen)
Dr. Stephan Wagner,
Fraunhofer-IZM, Berlin
Coffeebreak
bmbF Leitinnovation
micro Fuel Cells iii
Intelligent monolithic integrated fuel
cell cascades including
hydrogen storages (I2BRENN)
Gilbert Erdler,
Micronas GmbH, Freiburg
Alternative Concepts
Joint project Zinc/Airmicro
fuel cell (ZiLuZell)
Jean-Francois Drillet,
Dechema, Frankfurt
Michael Sorg, Universität Bremen
Fuel cell system for Solar Boat
Battery-Extender (BZ-BATTEXT)
Dr. Johannes Schirmer, DLR, Stuttgart
outlook
Micro fuel cells on the road to the
daily application – State-of-the-Art
and Challenges
Ulf Groos, Fraunhofer-ISE, Freiburg

Wednesday, 08 October 2008
New production technology in the
field of micro Technology i
10:00
–
11:00
11:30
–
12:30
Chair:
Univ.-Prof. Dr.-ing. Alexander Verl,
Fraunhofer-iPA, stuttgart
Company Talks
Modular positioning systems
for the micro assembly
Manfred Meyer, IEF Werner GmbH,
Furtwangen
Miniaturized components for changeable
microassembly systems
Samuel Härer, SCHUNK GmbH & Co.
KG, Lauffen
Integrated Quality Assurance
and Automated Inspection of
Microsystems
Edgar Maehringer-Kunz,
IMSTec GmbH, Mainz
Coffeebreak
Company Talks
Ultraprecision machining
of dies and moulds
Dr. Bernd Heitkamp,
Kugler GmbH, Salem
Metal Processing and Structuring
Etching – Precision in High Volumes
Dr. Angel Lopez,
MicroMetal GmbH, Müllheim
Thermo Flow Forming – Novel
Manufacturing Technology for
Polymeric Micro Components,
Arif Rochman, Hochschule Aalen –
Kunststofftechnik, Aalen
Lunch
New production technology in the
field of micro Technology ii
14:00
–
15:00
Chair: Prof. Dr.-ing. habil. Jörg Müller,
Hamburg University of Technology
(TUHH)
Company Talks
Development, Production and
Applications for new surfaces of
photocatalytic Nanoparticles
Christian Wögerer, Profactor Research
and Solutions GmbH
and CEST – Centre of Electrochemical
Surfaces Seibersdorf, Austria
Micro-parts Mass Production –
Photo Electro Forming – a unique
UV-LIGA process
Shaun Mason,
Tecan Ltd., United Kingdom
Saving Energy using Micro Vibration
Sensors in Battery-Powered Devices
Günter Müller,
Sensolute GmbH, Karlsruhe
Room C 4.1 Room C 4.2 Room C 4.3
Photo: IMTEK
New applications, products, systems
and components, micro handling and
laser in the field of micro Technology
10:00
–
11:00
11:30
–
12:30
Chair: Prof. Dr. phil. nat. habil.
Thomas Graf, inst. f. strahlwerkzeuge
(iFsW), stuttgart University
Company Talks
Reaching new frontiers with micro
pumps
Dr. Thomas Weisener,
HNP Mikrosysteme GmbH, Parchim
Nanosized products with micro-scale
dispersion devices
Dr. Chris Thomas,
Serendip AG, Wollerau, Switzerland
Thermo-Generators – Maintenancefree
Power for Wireless Sensors and
Micro-Actuators
Burkhard Habbe,
Micropelt GmbH, Stuttgart
Coffeebreak
Company Talks
Laser welding in micro dimensions
simply and easily
Winfried Korb,
arteos GmbH, Seligenstadt
High speed laser structuring
in photovoltaics
Dr. Uwe Stute, TRUMPF Laser
GmbH + Co. KG, Schramberg
New mechatronic methodics for developments
in education and industry
Gerd Bauer,
efm-systems GmbH, Stuttgart
Lunch
Hot Spot wgL – Nanotechnology
in the Leibniz gemeinschaft (wgL)
14:00
–
15:00
15:30
–
16:30
Chair: Dr. Martin schubert,
inM – Leibniz-institut für neue
Materialien gGmbH, saarbrücken
Nanooptic: Optical analytic at
nano layers and nano structure
Prof. Dr. Norbert Esser, ISAS –
Institute for Analytic Sciences, Berlin
Functional Polymer Surfaces with
Nanotechnology
Prof. Dr. Manfred Stamm, IPF –
Leibniz-Institut für Polymerforschung
Dresden e.V., Dresden
Utilizing the Knowledge about
Cooperation Obstacles for Building
a Bow between R&D-Partners
Dr. Thomas Müller,
INM – Leibniz-Institut für Neue
Materialien gGmbH, Saarbrücken
Coffeebreak
Plasma Surface Modification of Nano
Particles
Dr. Volker Brüser, INP – Leibniz-Institut
für Plasmaforschung und Technologie
e. V., Greifswald
Ultraprecision machining of surface
with ion and plasma beam
PD Dr. Axel Schindler, IOM –
Leibniz-Institut für Oberflächenmodifizierung
e. V., Leipzig
Ion beam – tool for production
of nano structure
Dr. Bernd Schmidt,
FZD – Forschungszentrum Dresden
Rossendorf e. V., Dresden
New high-tech ideas for spin-offs i
10:00
–
11:00
11:30
–
12:30
Chair: Dr. Andreas Leson,
Fraunhofer-iWs, Dresden
Development of micro fuel cells with
electronics manufacturing technologies
Stefan Wagner, Fraunhofer-IZM, Berlin
Research interests in thin film
technology
Dr. Reinhard Fendler, FHR Anlagenbau
GmbH, Ottendorf-Okrilla
Chances of Nanotechnology
with Polymers
Prof. Dr. Manfred Stamm, Leibniz-
Institut für Polymerforschung e. V., Dresden
Coffeebreak
New high-tech ideas for spin-offs ii
Chair: Prof. Dr. Manfred stamm,
Leibniz-institut für Polymerforschung,
Dresden
Development of nano-structured
materials – From basic research
to readiness for marketing
Dr. Matthias Schweinsberg,
SusTech GmbH & Co. KG, Darmstadt
Nano-structured materials in new
battery systems
Dr. Hans Jürgen Lindner, VARTA
Microbattery GmbH, Ellwangen
Nanostructured Carbon Coatings –
Technology and Applications
Dr. Andreas Leson,
Fraunhofer-IWS, Dresden
Lunch
Transnational research projects in
the field of micro- and Nanoproduction
Chair: Dr. Christian Wenzel,
Fraunhofer-iPT, Aachen
ERA-Net-Opticalstruct – Machining
Microstructures on Free-Form
Surfaces
14:00 Frank Niehaus, Fraunhofer-IPT, Aachen
ERA-Net-REMM – Research on electro-
– chemical machining Microdetails
Dr. Hans-Peter Schulze, Otto von
15:00 Guericke-University Magdeburg
ERA-Net-UFER – Investigations of
SU-8 removal from metallic high
aspect ratio micro structures with
a novel plasma technique
Dr. Josef Mathuni, R3T GmbH, Taufkirchen
Coffeebreak
National research projects in the
field of micro- and Nanoproduction
Chair: Dr. Annette Kipka,
W.C. Heraeus GmbH & Co. KG, Hanau
Nanosieb – Enhancement of Fine Line
Print Resolution by Coating of Screen
Fabrics and Rheology Modifications of
Pastes
15:30 Dr. Thorsten Kraft,
Fraunhofer-IWM, Freiburg
– FELIG – Implementing an Automated
Production Line for LIGA Mass Production
16:30 Dr. Lothar Hahn,
Forschungszentrum Karlsruhe GmbH
Giganoboard – High-bit-rate Data
Transmission on Printed Circuit
Boards with nanoscalic Base Materials
Thomas Gottwald,
Schweizer Electronic AG, Schramberg

Thursday, 09 October 2008
10:00
–
11:00
11:30
–
12:30
14:00
–
15:00
15:30
–
16:30
Room C 4.1 Room C 4.2 Room C 4.3
Nano goes production i New applications, products in test
Chair: Dr. stefan Barcikowski,
Laser Zentrum Hannover e. V., Hannover
NanOnline – Online-Characterization
of Nanoparticles in High Concentrations
Rolf Bräunig, Partikel-Analytik-
Meßgeräte GmbH, Frechen
NanoDirekt – Direct process for the
manufacture of nano-suspensions and
their incorporation in thermoplastic
matrices for the production of nanocomposites
Dr. Irma Mikonsaari,
Fraunhofer-ICT, Pfinztal
COMPOMEL – Composites with
improved mechanical and electrical
Properties
Doreen Thielmann,
Motorola GmbH, Taunusstein
Coffeebreak
Chair: Dr. Kathrin Lehmann,
evonik Goldschmidt GmbH, essen
ProTCF – Printed transparent and
conductive films based on Indium
Tin Oxide – from lab results to in-line
production
Dr. Dieter Adam,
Evonik Degussa GmbH, Marl
NanoPart – Nanoparticle Production
Technology for Coating Industry via
Laser Ablation of Ceramics in Liquid
Media
Dr. Stefan Barcikowski,
Laser Zentrum Hannover e. V., Hannover
NanoVer – Continuous Production and
Functionalization of Non-Agglomerated
Nanoparticles and their Utilization for
Lifetime Improvement of Antifriction
Coatings
Dr. Matthias Koch,
Merck KGaA, Darmstadt
Lunch
Nano goes production ii
Chair: Dr. Matthias Koch,
Merck KGaA, Darmstadt
ULTRASURF – development and
production of innovative nano-particle
based layer structures from switchable
multi-functional polymer surfaces
Dr. Petra Uhlmann,
Leibniz-Institut für Polymerforschung e. V.,
Dresden
SolGel – Industrial sol-production
and coating of flexible substrates
with nanoscaled sol-gel-materials
Dr. Wiebke Maas,
Evonik Degussa GmbH, Marl
NaNoScratch – Scratch resistant
polymers with new nanoadditives
Dr. Kathrin Lehmann,
Evonik Goldschmidt GmbH, Essen
Coffeebreak
Chair: Dr. irma Mikonsaari,
Fraunhofer-iCT, Pfinztal
NanoHM – Cutting tools made from
nanoscale materials with superhard
coatings for dry machining and applications
in hardened steels and cast iron
Dr. Werner Kölker, CemeCon AG, Würselen
Functional Surfaces
Dr. Heinz Hilgers,
Nanofunk, Mainz
and measurement engineering,
system technologies and standards
10:00
–
11:00
11:30
–
12:30
Chair: Dr. Uwe Brand, Physikalisch-
Technische Bundesanstalt (PTB),
Braunschweig
Company Talks
New Sensor Technology for the
Measurement of 3D Microgeometries
Harald Huttenlau,
Werth Messtechnik GmbH, Gießen
Optical Surface Measurement
Technology – Systems and Applications
in Research & Industry
Jürgen Valentin,
Nanofocus AG, Oberhausen
Noncontact infrared temperature
measurement on very small objects –
application of miniaturized
thermometers
Thomas Ullrich, Optris GmbH, Berlin
Coffeebreak
Company Talks
3 Co-Ordinate Metrology for the
Nanoworld
Otto Boucky, Carl Zeiss Industrielle
Messtechnik GmbH, Oberkochen
HarmoniX Microscopy – Fast and
Accurate Material Property Mapping
at the Nanoscale
Ralf Schniersmeier,
Veeco Instruments, Mannheim
Custom Solutions for Nanorobotics
and Nanometrology
Rafal Wierzbicki,
Nascatec GmbH, Stuttgart
Lunch
4m Network of excellence –
industrial workshop on integration
in micromanufacturing
14:00
–
15:00
15:30
–
16:30
Workshop Leader: Dr. Pieter Bolt
Tno science & industry, eindhoven,
The netherlands
4M Network of Excellence Multi-
Material Micro Manufacture –
A Knowledge Community in
Multi-material Micro Manufacture
Topic of the workshop is the need for
integration technologies in the field of
multi-functional components manufacturing.
Such components will allow further
miniaturization and enhanced device
functionality as well as less assembly
and packaging steps. For example by
embedding ICs or MEMS structures in
3D products (e.g. sensors) without intermediate
printed circuit boards. This
requires integration on both product and
production side. Assembly avoiding technologies
such as local patterning, moulding
or layering techniques have to be integrated
into one economic process flow.
Coffeebreak
4M-Workshop
Outline programme workshop
- General introduction
- Integration in manufacturing of
polymer based devices
- MID Technologies for polymer based
multifunctional 3D packages
- Ceramic 3D electronics packaging
- Interactive discussion
- Conclusions and wrap up.
New production technology in the
field of micro- and Nanotechnology
10:00
–
11:00
11:30
–
12:30
Chair: Prof. Dr. Michael Veith,
Leibniz-institut für neue Materialien
gGmbH (inM), saarbrücken
Company Talks
Functional surface systems
in industrial applications
Dr. Jürgen Sander,
Nanogate AG, Saarbrücken
Carbon Nanotubes History and
Applications
Dr. Ivica Kolaric,
Fraunhofer-TEG, Stuttgart
Round Table Discussion
Use of Nanotechnology in industry
- Prof. Dr. Michael Veith
- Dr. Jürgen Sander
- Dr. Ivica Kolaric
- Ronald Beiersdorff
Coffeebreak
Company Talks
The new freedom in distance
measurement – nanometer
measurement with maximum
flexibility
Dr. Jürgen Petter,
Luphos GmbH, Darmstadt
Electron Beam Nanolithography
as a Global Service
Dr. Bernd Maile, xlith GmbH, Ulm
Inkjet in Electronic Printing
Dr. Christian Buchner,
Gebr. Schmid GmbH + Co.,
Schwetzingen
Lunch
Photo: Carl Zeiss
Photo: Forschungszentrum Karlsruhe

Steering and organising Committee
MinR Hermann Riehl Bundesministerium für Bildung und Forschung (BMBF)
MinR Dr. Klaus-Jürgen exner Bundesministerium für Wirtschaft und Technologie (BMWi)
Dr. Robert Ruprecht,
Dr. Christine ernst, stefan scherr,
Dr. Matthias Gebauer
Projektträger Forschungszentrum Karlsruhe (PTKA)
Prof. Dr. engelbert Westkämper, Fraunhofer-Institut für Produktionstechnik und
Dr. Udo Gommel Automatisierung (IPA)
Prof. Dr. Holger Reinecke, Hahn-Schickard-Gesellschaft – Institut für
Dr. Rainer Günzler Mikrosystemtechnik (IMIT)
Dr. Martin schubert Kompetenzzentrum CC-NanoChem
Thomas Walter, Fabian Kater Landesmesse Stuttgart GmbH
Prof. Dr. Michael Veith Leibniz-Institut für Neue Materialien gGmbH
Prof. Dr. Helmut Dosch,
Dr. Peter A. van Aken
Max-Planck-Institut für Metallforschung
Prof. Dr. Volker saile Universität Karlsruhe (TH) und Forschungszentrum
Karlsruhe GmbH, Institut für Mikrostrukturtechnik
Klaus Zimmer VDMA Micro Technology
organised by:
Landesmesse Stuttgart GmbH
Messepiazza 1
70629 Stuttgart, Germany
Contact:
ICS Congress-Organisation
Phone: +49-(0)711-18560-2844
Fax: +49-(0)711-18560-2836
congress@ics-stuttgart.de
www.messe-stuttgart.de
Co-operation partners
Media partners
Conceptual sponsor:
Micro Technology Group in the German
Engineering Federation (VDMA)
Lyoner Straße 18
60528 Frankfurt a. M., Germany
Contact:
Klaus Zimmer, Managing Director
Phone: +49-(0)69-6603-1315
Fax: +49-(0)69-6603-1861
klaus.zimmer@vdma.org
www.vdma.org
industry - Science dialogue
Visitor information:
registration
miNaT Hot Spots
www.minat-messe.de/hotspots
MiNaT Hot Spots partners – forum for industry and science
Venue:
New Stuttgart Trade Fair Centre, hall 2
MiNaT Hot Spots: ICS International Congress
Center Stuttgart
Opening times:
7 - 9 October 2008, 9:00 - 17:00
Admission prices:
for the trade fairs MiNaT and SEMICON
1 day: 20 EUR, all 3 days: 39 EUR
for MiNaT Hot Spots incl. MiNaT and SEMICON
1 day: 69 EUR, all 3 days: 149 EUR
Free admission for students, pupils and trainees
Conference proceedings: 30 EUR
Can also be ordered at:
www.minat-messe.de/proceedings
All prices are subject to statutory VAT.