General DVR Operation and Configuration - Galaxy Control Systems
General DVR Operation and Configuration - Galaxy Control Systems
General DVR Operation and Configuration - Galaxy Control Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SG <strong>DVR</strong> Interface Mini‐Guide<br />
Once the SG <strong>DVR</strong> Report screen is open, user may start recorded video for certain events where device<br />
(reader/door/input) is linked to a camera/<strong>DVR</strong> Unit. Choose the desired events by checking the<br />
appropriate options to specify which activities (events) to include.<br />
7. Right-click the desired event (line item) on the <strong>DVR</strong> Report screen.<br />
8. Select the short-menu option to ‘View <strong>DVR</strong> Video”.<br />
9. The GCS <strong>DVR</strong> Viewer will open <strong>and</strong> start video from 30 seconds prior to the event’s timestamp.<br />
Remember that the system clocks on both the [System <strong>Galaxy</strong> PC’s] <strong>and</strong> the [physical <strong>DVR</strong> Unit]<br />
should be synchronized to the same master clock source for accurate clocking/time stamping <strong>and</strong><br />
synchronization between the System <strong>Galaxy</strong> device <strong>and</strong> the video stream.<br />
FIGURE 20 – RECORDED PLAYBACK FROM THE <strong>DVR</strong> REPORT SCREEN<br />
Right‐mouse‐click the selected event that is linked to a camera<br />
Then select the View <strong>DVR</strong> Video option on the short‐menu<br />
The Viewer opens <strong>and</strong> plays live video session for the camera<br />
linked to that reader/input device<br />
Page 32 of 40