General DVR Operation and Configuration - Galaxy Control Systems
General DVR Operation and Configuration - Galaxy Control Systems
General DVR Operation and Configuration - Galaxy Control Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SG <strong>DVR</strong> Interface Mini‐Guide<br />
GET LIVE VIDEO FROM AN ARMED ALARM EVENT<br />
Viewing live video is available from the Alarm screen. There are several ways to see video from this<br />
screen.<br />
a) Automatic Call-up: The GCS <strong>DVR</strong> Viewer automatically opens when an armed alarm comes in<br />
for a device that is linked to a camera (if the Automatic Call-up Video) is enabled in Workstation<br />
Options.<br />
The GCS <strong>DVR</strong> Viewer shows live video feed for the priority alarm when the alarm device<br />
is in the “ARMED” condition. Thus, if more than one device is in the alarm state, <strong>and</strong><br />
priorities are used, the video comes from the device with highest priority<br />
If a device becomes activated in the unarmed condition, the <strong>DVR</strong> Viewer will not<br />
automatically start up.<br />
b) Manual Call-up: Operators can right-click an Alarm Event from the Alarm events List. Select the<br />
‘View Live Video’ option from the short-menu.<br />
FIGURE 16 - PLAYBACK FROM ALARM SCREEN WITH ALARMS<br />
Page 28 of 40