General DVR Operation and Configuration - Galaxy Control Systems

Viewing Modes of the DVR Viewer
The DVR Viewer has two viewing modes, LIVE and RECORDED.
SG DVR Interface Mini‐Guide
WHERE VIDEO CALLS FROM… SINGLE CAM GRID VIEW
Automatic call up from an incoming armed alarm YES N/A
Operator Commanded
Operator Selected
Operator Selected
Operator Selected
LIVE VIDEO FEED
from SG Hardware Tree
a device icon
a camera icon
an incoming event
from SG Graphic Floor plan
an icon on a floor plan
from DVR Viewer LIVE
a chosen camera (droplist)
from DVR Viewer RECORDED
a chosen camera (droplist)
from SG HISTORY REPORT
historical event
from DVR Viewer’s GRID VIEW
a chosen set cameras (droplist)
YES N/A
YES N/A
YES N/A
N/A YES
System Galaxy allows the operator to select live video from a single camera or multiple cameras at once.
NOTES:
PAN / TILT / ZOOM controls are supported provided the DVR and camera are capable.
PRESET controls are supported provided DVR and camera supports preset programming.
Galaxy is Net Time Sync compliant as are the Discovery 3 & selected brand DVRs
RECORDED VIDEO ( HISTORIC RETRIEVAL )
NOTES:
See manufacturer’s information for DVR memory limits
DATE and TIME controls are available to refine your selection
Split screen or GRID VIEW view is not available in this mode.
The ‘Playback Controls’ (start, stop, pause, fwd, rew) are available in this mode.
System Galaxy adds an approximate 30-second lead-time to recorded video. Thus, video
retrieval begins playing at approximately 30 seconds before the requested timestamp.
Page 21 of 40