General DVR Operation and Configuration - Galaxy Control Systems
General DVR Operation and Configuration - Galaxy Control Systems
General DVR Operation and Configuration - Galaxy Control Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting Instant LIVE Video for an Armed Alarm (per Workstation)<br />
SG <strong>DVR</strong> Interface Mini‐Guide<br />
You can configure the workstation to automatically show INSTANT LIVE LIVE FEED when an armed alarm<br />
occurs in the System <strong>Galaxy</strong> system. This is enabled by checking the ‘Automatically Call-up <strong>DVR</strong><br />
Video’ option in Workstation Options screen.<br />
IMPORTANT:<br />
This is a per workstation setting, <strong>and</strong> will not affect other workstations in the <strong>Galaxy</strong> system.<br />
A master operator login is required to edit Workstation Options (or System Settings) screen.<br />
The ‘Automatically Call-up <strong>DVR</strong> Video’ shows video for cameras that are linked to an input or<br />
door/reader that has been configured to need acknowledgement <strong>and</strong> that are armed.<br />
Alarm Priority: Be aware that if you if you are using alarm priorities, that the live feed will come<br />
from the camera with the highest priority.<br />
1) Open the Workstation Options screen - from menu Configure> Options> Workstation Options<br />
2) In the Alarm Options tab, you will check the ‘Automatically Call-up <strong>DVR</strong> Video’ option to enable it.<br />
Unchecked means the option is disabled <strong>and</strong> the <strong>DVR</strong> Viewer will not Auto-call LIVE feed for any<br />
armed alarms.<br />
3) Click the APPLY button <strong>and</strong> OK button to save your changes.<br />
4) Restart the System <strong>Galaxy</strong> software to initiate the changes.<br />
FIGURE 4 – ENABLE <strong>DVR</strong> SUPPORT IN WORKSTATION OPTIONS SCREEN<br />
Page 13 of 40
Change language