General DVR Operation and Configuration - Galaxy Control Systems
General DVR Operation and Configuration - Galaxy Control Systems
General DVR Operation and Configuration - Galaxy Control Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Enabling & Disabling <strong>DVR</strong> Support per Workstation<br />
SG <strong>DVR</strong> Interface Mini‐Guide<br />
You can enable <strong>and</strong> disable the <strong>DVR</strong> Interface at each workstation individually through the <strong>Galaxy</strong><br />
Workstation Options screen. You may not want some workstations in the system to be able to start up<br />
<strong>and</strong> view video from the <strong>Galaxy</strong> <strong>DVR</strong> Viewer.<br />
ENABLING <strong>DVR</strong> SUPPORT AT SG WORKSTATIONS<br />
1) Open Open the Workstation Options screen - from menu Configure> Options> Workstation Options<br />
2) In the <strong>General</strong> tab, you will check the <strong>DVR</strong> Enabled option to enable it. Unchecked means the option<br />
is disabled <strong>and</strong> you will not be able to see the <strong>DVR</strong> Types droplist in the <strong>DVR</strong> programming screen.<br />
3) Click the APPLY button <strong>and</strong> OK button to save your changes.<br />
4) Restart the System <strong>Galaxy</strong> software to initiate the changes. (NOTE: see next section before restarting)<br />
FIGURE 3 – ENABLE <strong>DVR</strong> SUPPORT IN WORKSTATION OPTIONS SCREEN<br />
<strong>DVR</strong> Enabled option in the <strong>General</strong> tab<br />
checked = enables the <strong>DVR</strong> connections<br />
unchecked = disables the <strong>DVR</strong> connections<br />
Page 12 of 40
Change language