MOULDED POLYESTER ENCLOSURES MINIPOL SYSTEM

MOULDED POLYESTER ENCLOSURES MINIPOL SYSTEM

SHOCKPROOF
Can take hits up to
20 Joules,
IK 10 according to
UNE-EN 50102
IEC 62262 standards
SELF EXTINGUISHABLE
Does not feed the flames
Hot wire test: 960 °C according
to UNE-EN 60695-2-1/0
IEC 60695-2-10
standards
THERMIC CLASS
-50…+150 °C
E150°, according to UNE 21305
EN-HD 566S1 and IEC 60085
standards
HALOGENFREE
Does not issue toxic
gases
NON-HYGROSCOPIC
Does not absorb damp or water
DISTRIBUTION BOXES
THE MINIPOL RANGE
The enclosures are in comformity with requirements of standard EN 50298.
CERTIFICATES
UL, CSA, KEMA
COLOUR
RAL 7035
LGAI - Laboratori General d’ Assaig i Investigacions
DEGREE OF PROTECTION
IP 66 according to
UNE 20324, EN 60529
IEC 62262 standards
DOUBLE INSULATION
Protection from electric shock
according to UNE 60439-1
and IEC 60439-1 standards
U = 690 V
i
CORROSION-RESISTANT
Resistant to climatic-changes
and ultra-violet rays
Does not requir
any finishing
EASY and FAST FITTING
No special tool is needed

POF
TF-MIP
FP
MOUNTING
FLEXIBILITY
There are possible to fit horizontally
or vertically, obtaining a lot of combinations.
- set of adjustable moulded brakets
(4 pcs)
- wall fixing set directly to the wall
with 4 pcs wall-plug
- pole mounting with bridle or band
CLOSING PLATES (U)
COUPLING PIECES (UM)
MODULAR MOUNTING PANEL
and INNER DOOR (CH)
Mounting panel and inner door
maintain IP 20 degree of protection
when the external door is open.
STRUCTURE OF MINIPOL ENCLOSURES
EASY TO MACHINE
Vertical patterns in the interior of the doors,
which enables the correct fitting of devices.
INNER DOOR (PI)
There is possible to fit devices
on the lockable inner door.
PROTECTIVE EDGE at the
BOTTOM and on TOP
Single-block body, with even walls
optimisin the space and resistance.
SPECIALIZATION
It is possible to pre-machining by
request and to ask for personalized
colours. The colouring agent added
to the material before pressure.
EASY FITTING
Quick fixture guides in the back.
Permits fitting without drilling.
VARIOUS CLOSING SYSTEMS
All of the basic closing and locking
system provide that the locks can be
personalized to customer demand.

MIP-MS
Flat door
M=
S=
/PT
Height
(300, 400, 500, 600, 800)/3 = 300 mm, 4 = 400 mm etc.)
Width
(250, 300, 40, 500, 600)/25 = 250 mm, 3 = 300 mm etc.)
Depth does not marked
at 300 mm height is 140 mm depth
at 400 mm and 500 mm height is 200 mm depth
at 600 mm heigth is 230 mm depth
at 800 mm height is 300 mm depth
Transparent door
For example: MIP-43/PT = an enclosure, 400 mm height, 300 mm width,
200 mm depth, with a tansparent door
Flat door (without marking)
/3P Three point closing device,
with 1 pc double bit DIN 3.0 mm,
with swing lock, with double winged handle
/ EKDB Three point closing device,
with swing door, with 1 pc double bit
DIN 3.0 mm, with swing lock, with sunke swinging handle
Double winged handle with simple lock bolt
/CH... Modular mounting plate with different number of devices
BASIC TYPES
MIP-
325
43
44
54
64
65
86
Transparent door
325/PT
43/PT
44/PT
54/PT
64/PT
65/PT
86/PT
EXPLANATION OF THE TYPE-SYMBOLS
MIP = MINIPOL Product range
43/3P
44/3P
54/3P
64/3P
65/3P
86/3P
43/PT/3P
44/PT/3P
54/PT/3P
64/PT/3P
65/PT/3P
86/PT/3P
Supplied with all the accessories enabling it to be fixed to a wall.
43/EKDB
44/EKDB
54/EKDB
64/EKDB
65/EKDB
86/EKDB
43/PT/EKDB
44/PT/EKDB
54/PT/EKDB
64/PT/EKDB
65/PT/EKDB
86/PT/EKDB

DIMENSIONS OF THE ENCLOSURES [mm]
DIMENSIONS OF TRANSPARENT DOORS [mm]
COUPLING PIECES
A B C D E F G
MIP-325 300 250 140 276 212 120 110
MIP-43 400 300 200 370 262 180 170
MIP-44 400 400 200 370 362 180 170
MIP-54 500 400 200 470 362 180 170
MIP-64 600 400 230 570 362 210 200
MIP-65 600 500 230 570 462 210 200
MIP-86 800 600 300 770 562 280 270
A B E F
MIP-325 220 115 35 75
MIP-43 281 141 52 80
MIP-44 281 221 52 90
MIP-54 381 221 52 90
MIP-64 481 221 52 90
MIP-65 481 321 52 90
MIP-86 681 421 52 90
For vertical fitting
UM-420V - for 250 mm width
UM-430V - for 300 mm width
UM-440V - for 400 mm and more width
For horizontal fitting
UM-430H - for 300 mm height
UM-440H - for 400 mm and more height
CLOSING PLATES
U-402 - for 250 mm
U-403 - for 300 mm
U-404 - for 400 mm and 500 mm

ASSEMBLING POSSIBILITIES
UM-420V UM-430V UM-440V UM-440V UM-440V Vertical coupling pieces
DIMENSIONS OF INNER DOORS [mm]
Type: PI
Horizontal coupling pieces
UM-430H (2 pcs)
UM-440H (2 pcs)
UM-440H (2 pcs)
UM-440H (2 pcs)
UM-440H (2 pcs)
A B
MIP-43 366 258
MIP-44 366 358
MIP-54 466 358
MIP-64 566 358
MIP-65 566 658
MIP-86 766 658

PBP
PBM
PBM-/B
PBR
Adjustable base plate kit (4 pcs)
BASE PLATES
Polyester, PBP - (type of box)
- thickness: 4 mm
Metal, coloured, PBM - (type of box)
- thickness: 2 mm
Metal, with surface treatment, PBM- / B (type of box)
- thickness: 2 mm
- colour: RAL 2000
Perforated mounting plate, PBR- (type of box)
(TELEQUICK)
- thickness: 2 mm
Fitting clips for PBR
Clip M4, Clip M5, Clip M6.
A B C D
PBP/325 ( for MIP-325) 268 213 248 175
PBP/43 ( for MIP-43) 358 260 338 222
PBP/44 ( for MIP-44) 358 360 338 322
PBP/54 ( for MIP-54) 458 360 438 322
PBP/64 ( for MIP-64) 558 360 538 322
PBP/65 ( for MIP-65) 558 460 538 422
PBP/86 ( for MIP-86) 754 556 734 518
For enclosures: MIP-325 MIP-43 MIP-44 MIP-54 MIP-64 MIP-65 MIP-86
Type of kit: - PDP-200 PDP-200 PDP-200 PDP-230 PDP-230 PDP-300
Adjustable and hinged base plate kit
DIMENSIONS [mm]
For enclosures:
MIP-325 MIP-43 MIP-4 MIP-54 MIP-64 MIP-65 MIP-86
Type of kit:
- PGD-43 PGD-44 PGD-54 PGD-64 PGD-65 PGD-86

MODULAR CHASSIS OF DEVICE
CH - type chassis for installation of modular switchgear
- Assembly and wiring can install out of enclosure
- Installation can be found in the enclosure
- Mounting rails can be fitted in 7 different depths
- The sunk base plates allow to use non-modular devices too.
PARTS OF CHASSIS
- Side frame (1)
- DIN rail for modular devices (2)
- Holder for rail or plates (3)
- Holder for mounting plates (4)
- Front plate / cover plate (5) Type-symbol:
- Base plate (6) Type-symbol: PB
Example: CH 69/3:
Number of moduls 3×23 in 3 lines, 23 moduls by lines.
CC

In case of opened door the front plates provide IP 2X degree of protection too.
The different arrangements can be formed according to space requirement of cables and
devices.
F
R
O
N
T
P
L
A
T
E
S
For MIP-43 MIP-44 MIP-54 MIP-64 MIP-65 MIP-86
enclosures: /CH24/2 /CH36/2 /CH54/3 /CH54/3 /CH69/3 /CH116/4
Chassis:
Number of 24 36 54 54 69 116
modules:
Number of
lines:
B
A
S
E
P
L
A
T
E
S
ARRANGEMENTS OF THE FRONT PLATES
SETTING-IN OF THE CHASSIS IN MIP TYPES
CH24 CH36 CH54 CH54 CH69 CH116
2x12 2x18 3x18 3x18 3x23 4x29
SETTING-IN OF THE FRONT AND BASE PLATES IN THE CHASSIS
for enclousures
300 mm 400 mm 500 mm 600 mm
width width width width
for 202 mm CC-400/ CC-400/ CC-400/ CC-500/ CC-600/
hight 202 202 202 202 202
for 178 mm CC-300/ CC-400/ CC-400/ CC-400/ CC-600/
hight 178 178 178 178 178
for 152 mm CC-400/ CC-400/ CC-400/ CC-500/ CC-600/
hight 152 152 152 152 152
for 202 mm PB-400/ PB-400/ PB-400/ PB-500/ PB-600/
hight 202 202 202 202 202
for 178 mm PB-300/ PB-400/ PB-400/ PB-400/ PB-600/
hight 178 178 178 178 178
for 152 mm PB-400/ PB-400/ PB-400/ PB-500/ PB-600/
hight 152 152 152 152 152

OTHER ACCESSORIES
LOCKS
1 PDB - DIN 3.0 lock with double bit
EKD - double handle
2 LLT - triangular key
PTT - lock with triangular head, 11 mm
3 PCM - double handle with key lock
PCM/3P - double handle with key lock, three point close
4 EC -stainless steel padlock
5 PCC - stainless steel padlock
6 EKDB - sunk handle for different locks
CPI-DE - swing lock for inner doors
CPL-LL - key lock for inner doors
DP - outlet of condensation water
DVG - ventillation device

APPLICATIONS
A system of enclosures made of hot moulded fibreglass reinforced polyester (GRP) with a high
pressure technology. They are halogen free.
The enclosures of the MINIPOL System is a multipurposly usable product-family. Enclosures are
mountable on wall, on console and on the pick of pole.
High degree of protection (IP 66) meets the requirement of outdoor application. They can be used
in all kids of communication, electrical, pneumatical and hydraulical installation.
Rated insulation voltage of the enclosures is 690 V 50 Hz.
The base is made in one piece, garanteeing optimal avaibililty in the interior and increasing the
impact resistance. They offer optimal security for humans and animals because of the double
insulation characteristics.
The enclosures are available with flat or transparent doors in 7 different size from 300×250×140
mm up to 800×600×300 mm. They are symmetrical and reversible in many cases. The wide range
of accessories gives an extra using possibility to the MINIPOL range.