Laboratory Studies on Bio-Enzyme Stabilized Lateritic Soil ... - pmgsy
Laboratory Studies on Bio-Enzyme Stabilized Lateritic Soil ... - pmgsy Laboratory Studies on Bio-Enzyme Stabilized Lateritic Soil ... - pmgsy
CHEMICAL STABILZATION • Mixing or injecting additives: • Two types Standard stabilizers : lime, Cement, sodium silicate, calcium chloride, bituminous materials and resinous materials. Non standard stabilizers: Sulfonated Oils, Ammonium Chloride, Enzymes, Mineral Pitches and Acrylic Polymers.
Selection of stabilizer • Selecting the stabilizer type depends on number of factors including: • 1. gradation, • 2. plasticity index (PI), • 3. Availability and cost of the stabilizer and appropriate construction equipment • 4. Its long term effect on strength etc.
- Page 1 and 2: Laboratory <strong
- Page 3: STABILIZATION MECHANISMS. MECHANISM
- Page 7 and 8: Clay Particle -Water Water Relation
- Page 9 and 10: Mechanism of Enzyme Stabilization
- Page 11 and 12: Net Effect of Enzyme • Film of ad
- Page 13 and 14: Objectives of the Investigation •
- Page 15 and 16: Materials Used • Lateritic soil
- Page 17 and 18: (Andrew et al. 2002). (Isaac et al.
- Page 19 and 20: Manoj Shukla et.al 2003
- Page 21: • Bio-Enzymatic soil stabilizatio
- Page 25 and 26: Geotechnical properties Sl No. Prop
- Page 27 and 28: Geotechnical properties of Soils Sl
- Page 29 and 30: Enzyme Dosage • Enzyme is to be a
- Page 31 and 32: UNCONFINED COMPRESSION TEST CP ED1
- Page 33 and 34: Variation of Coefficient of Permiab
- Page 35 and 36: Fatigue Behavior of materials • T
- Page 37 and 38: Effect of Enzyme content on Fatigue
- Page 39 and 40: Effect of load repetitions on Ultim
- Page 41 and 42: Effect of loading amplitude on fati
- Page 43 and 44: FIELD EXPERIMENTAL STUDY • The ro
- Page 45 and 46: Dynamic Cone Penetration Test (Trea
- Page 47 and 48: Conclusions • Soil properties hav
- Page 49 and 50: Conclusions • Fatigue Analysis -
- Page 51 and 52: Concluding Remark • Based on expe
- Page 53 and 54: • Brazetti, R., and Murphy, S.R.(
CHEMICAL STABILZATION<br />
• Mixing or injecting additives:<br />
• Two types<br />
Standard stabilizers :<br />
lime, Cement, sodium silicate, calcium chloride,<br />
bituminous materials and resinous materials.<br />
N<strong>on</strong> standard stabilizers:<br />
Sulf<strong>on</strong>ated Oils, Amm<strong>on</strong>ium Chloride, <strong>Enzyme</strong>s,<br />
Mineral Pitches and Acrylic Polymers.
Change language