InterLab System User Manual

InterLab System - User Manual
[6] Always use substeps – if this button is switched off, to use substeps you must hold CTRL
button and make correction. If you switch on this button the substeps will be usable without CTRL
key.
[7] Order quantity – enter here the number of last orders that should be kept on the disc. Higher
value allows for longer images storage, but it requires higher capacity of hard disk(s). Lower value
means that history of orders is shorter.
[8] Select precision of substeps – you can choose what accuracy you want to make corrections
with.
[9] Reference photo preview – you can make corrections comparing photos which are processed
with the reference one.
After setting all needed options press the [Return] button to exit from configuration menu, next
save the changes and reset ilsPrintMaker.
2.9.2. Digital settings
The settings ensure smooth work flow with digital images.
[1] Default quantity of images – enter here the default quantity of image copies. This quantity
will be automatically set for all loaded images.
[2] Zero correction – turn ON this function if loaded images should be “clean” without any
corrections. Turned ON can be either [Auto Brightness] function OR [Zero Correction]. It is not
possible to turn ON both of them.
[3] Auto correction – turn on this function when photo should be corrected automatically. When it
is turned on – downloaded photos are analyzed and corrected automatically in density and in other
71