InterLab System User Manual
InterLab System User Manual
InterLab System User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.7.10. Additional tools<br />
<strong>InterLab</strong> <strong>System</strong> - <strong>User</strong> <strong>Manual</strong><br />
During image preparation within ilsPrintMaker, additional options are available, such as:<br />
Clear images with value equal to zero.<br />
Change the format.<br />
Adding an image file(s).<br />
[1] Clear Zero<br />
[2] Change format<br />
[3] Add picture<br />
ADDITIONAL<br />
TOOLS<br />
button<br />
[1] Clear zero – any image with number of copies equal to zero is cleared from thumbnails view.<br />
This option is helpful in cases when user has many images with different values and you want to<br />
verify images sent and how many remain.<br />
[2] Change format – by pressing this button you can change selected print format (after pressing<br />
this button, window with format list will appear). After the change, it is not necessary to repeat any<br />
operation (selecting, correction, etc.) – excluding cropping.<br />
[3] Add image – this button allows to download additional image(s) from digital source (after<br />
pressing this button, window with graphic files will appear).<br />
2.7.11. Lab Color Simulation<br />
[Lab Color Simulation] function gives the possibility to view the images with ICC Profiles applied<br />
(if the profile has been set in ilsImageProcessor previously). It means that user may see images<br />
similar (as near as possible) to the final printed image.<br />
To start simulation color function, press the button on the panel on right side of ilsPrintMaker<br />
window:<br />
57
Change language