InterLab System User Manual

Advanced properties:
InterLab System - User Manual
After pressing [Advance] button – more functions will appear (on the right side of the window).
Properties available in advanced window:
Text – a field with standard formatting sets (set the font, color, size, style and alignment).
Image – the scale of image can be changed in that field.
ID Block size, margin and background – set the size of ID Block, margins (vertical and
horizontal) and background color.
An example of an image with ID Block:
[3] Position of ID Block – ID Block may be located along any edge of the print. Select location by
pressing the appropriate button (top, bottom, left, right).
[4] [One to one] scale – use this button to view downloaded image in 1:1 scale with original
image resolution.
[5] Switch button for Mode 1 / Mode 2 - change the mode by clicking this button. If it is pushed
off – [Mode 1] is active, if the button is pushed on – [Mode 2] is active.
[6] Align image – force image to align to field position on cut sheet. Click desired position.
[7] Print position – set position in relation to the reference point of a cut sheet. Measured in
millimeters [mm] (0,0) being a reference point in the left upper corner of the print.
[8] Print size – allows to fix print size in millimeters without distortion.
[9] Border color and size – click on the border color field to edit border color and other steps as
in [Mode 1].
[10] Background color – click on the background color field to add or change the color (refer to
paragraph 2.7.8.).
[11] Load frame from file – option for adding previously created frame saved as a file. First, be
sure that you saved the frame as a file, and next click the [Load] button, select file and download it
to the image (refer to paragraph 2.7.8.).
[12] Remove – click this button to remove selected frame from the file (usually either to set no
frame or to select another one).
56