InterLab System User Manual
InterLab System User Manual
InterLab System User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>InterLab</strong> <strong>System</strong> - <strong>User</strong> <strong>Manual</strong><br />
Part of the installation process is installation of all required drivers and additional drivers that are<br />
selected during installation.<br />
Installation of dirvers starts automatically however a user has to follow instructions displayed on<br />
several windows.<br />
11. Last page informs you about successful installation. There is also information that you<br />
should restart computer, and two options: you can restart now or later. Choose one of them and<br />
click [Finish] button.<br />
HASP Key Installation process<br />
WARNING!<br />
Make sure that the HASP Key (with <strong>InterLab</strong> <strong>System</strong> license) is plugged into Main Graphic<br />
Station computer. This connection is necessary, so if you did not do it yet – please FIRST<br />
plug in the HASP Key and NEXT click the Finish button.<br />
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<br />
After computer restarts the installation is complete and you may run ILS software from the link on<br />
desktop, or from START menu.<br />
After installation on Main Graphic Station a directory structure will be created that is constant and<br />
necessary for correct software operation (refer to paragraph 1.8.3.).<br />
After this you will have full installation of software on main computer. Now you need to install<br />
ILS software on your graphic stations.<br />
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<br />
19
Change language