You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VALET MODE<br />
The valet switch allows you to temporarily bypass all alarm function,<br />
eliminating the need to hand your remote to parking attendants or<br />
garage mechanics. When the <strong>system</strong> is in valet mode, all alarm functions<br />
are bypassed, except the remote panic feature and remote door locks<br />
which remain operational.<br />
Enter Valet Mode:<br />
1. Turn the ignition to “ON” position.<br />
2. Push and hold the valet switch for 2 seconds until the LED turns on.<br />
The LED will remain on as long as the <strong>system</strong> is in ‘valet mode’.<br />
Exit Valet Mode:<br />
1. Return to normal operation, turn ignition ‘ON’.<br />
2. Push and hold valet switch for 2 seconds, The LED will turn off<br />
indicating the <strong>system</strong> has exited the valet mode.<br />
PANIC FUNCTION<br />
The remote can be used as a remote panic switch to manually trigger the<br />
alarm in case of emergency.<br />
1. Press and hold (Lock) button on the remote for 3 seconds. The<br />
siren will immediately sound.<br />
2. To stop the siren sounding and exit the panic function, press and<br />
hold (Lock) button on the remote for 3 seconds.<br />
Note: If the button is not pressed, the siren will automatically stop after<br />
30 seconds.<br />
TRIGGER THE SYSTEM<br />
When the CE-SS200 <strong>security</strong> <strong>system</strong> is armed, your <strong>vehicle</strong> is protected<br />
as follows:<br />
1. Light impacts will trigger the warn-away signal. (A long chirp<br />
from siren).<br />
2. Heavy impacts / doors open / hood/bonnet open / trunk/boot open<br />
or turning on the ignition switch will trigger the programmed<br />
sequence. The starter disable relay (if installed) prevents the <strong>vehicle</strong>’s<br />
starter from cranking. The siren and indicator lights will turn on to<br />
alert of an intrusion for 30 seconds. Then it will stop and<br />
automatically reset and re-arm. If one of the sensors or detectors<br />
are still active, the alarm <strong>system</strong> will sound a maximum of 6 times of<br />
30 seconds cycles.<br />
ANTI CAR - JACKING<br />
Warning: The default setting for anti-car jacking is off. See below to<br />
activate anti-car jacking feature.<br />
Activate Anti Car Jacking Mode:<br />
1. When the ignition is in the “On” position, press and hold the<br />
remote (Lock) and (Unlock) buttons at the same time for 2<br />
seconds. The indicator lights will turn on for 1.5 seconds to indicate<br />
the <strong>system</strong> has entered the anti-car jacking mode.<br />
2. Once the <strong>system</strong> is in anti-car jacking mode, If you are forced from the<br />
<strong>vehicle</strong>, the <strong>system</strong> will trigger when the door is opened and closed<br />
while the ignition is “ON”.<br />
8 9