road racing fim superbike & supersport world championships & fim ...
road racing fim superbike & supersport world championships & fim ...
road racing fim superbike & supersport world championships & fim ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
) it must be safely mounted on the very end of seat/rear bodywork and<br />
approximately on the centre line of the motorcycle. In case of dispute<br />
over the mounting position or visibility of the Rear Safety Light, the<br />
decision of the FIM Superbike Technical Director will be final.<br />
c) the power output/luminosity must be equivalent to approximately 10-<br />
15W (incandescent) or 3-5W (led).<br />
d) the light must be able to be switched on and off.<br />
2.4.11 The following items MAY BE altered or replaced from those<br />
fitted to the homologated motorcycle.<br />
• Any type of lubrication, brake or suspension fluid may be used.<br />
• Gaskets and gasket material.<br />
• Bearings (ball, roller, taper, plain, etc.) of any type or brand may be used.<br />
• Fasteners (nuts, bolts, screws, etc.).<br />
• External surface finishes and decals.<br />
• It is recommended that motorcycles are equipped with a red light on the<br />
instrument panel that will flash in the event of oil pressure drop.<br />
2.4.12 The following items MAY BE removed<br />
• Instrument and instrument bracket and associated cables.<br />
• Tachometer.<br />
• Speedometer and associated wheel spacers.<br />
• Chain guard.<br />
2.4.13 The Following Items MUST BE Removed<br />
• Headlamp, rear lamp and turn signal indicators (when not incorporated in<br />
the fairing). Openings must be covered by suitable materials.<br />
• Rear-view mirrors.<br />
• Horn.<br />
80<br />
S B K