FileMaker Pro 4.1 Mac User's Guide

6-4 FileMaker Pro User’s Guide
Setting margins
Select to specify sizes
Select to alternate margins—the
inside margin prints on the left
side for the first page, on the right
for the second page, and so on
You can set different margins for each layout.
1. Choose Page Setup from the File menu, confirm the printer and paper
settings, and then click OK.
To switch printers, see “Specifying a printer” on page 6-14. For
information about other settings, see the manual that came with your
printer.
2. In Layout mode, choose a layout, and then choose Layout Setup from
the Mode menu.
3. In the Layout Setup dialog box, select Fixed page margins, type values
for the margins, and then click OK.
4. Switch to Preview mode to check the margins.
Type margin
sizes
Keep these points in mind:
1 If you don’t select Fixed Page Margins, FileMaker Pro uses the
printer’s default margins.
1 In Layout mode, choose Set Rulers from the Mode menu to change the
unit of measure for margins. See “Positioning and sizing objects” on
page 3-40.