LTCC PROCESSING INSTRUCTIONS For Ferro A6 and L8 Tape
LTCC PROCESSING INSTRUCTIONS For Ferro A6 and L8 Tape
LTCC PROCESSING INSTRUCTIONS For Ferro A6 and L8 Tape
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1.15 FIRING<br />
RECOMMENDED SETTTERS<br />
Fused quartz for either <strong>L8</strong> or <strong>A6</strong> . Bare alumina setters are ok for <strong>L8</strong> but should not be used for<br />
<strong>A6</strong>M. In some cases Zirconia felt is better for full coverage ground plane metallization parts to<br />
improve air flow <strong>and</strong> reduce hot spots <strong>and</strong> ultimately warpage.<br />
RECOMMENDED SUPPLIERS<br />
Fused Quartz GE 124, 16 micro inch surface: Behm Quartz Industries,<br />
www.behmquartz.com 800.543.7875<br />
Zirconia Felt: Zicar Fibrous Ceramics, Part No. ZYF-50, Tel: 800.245.2562<br />
Alumina Setters, 96% Alumina, Coorstek www.coorstek.com<br />
1.16 CLEANING<br />
There is no cleaning solution for tape. Particulates are typically removed with an anti-static<br />
brush. We recommend using only reagent grade acetone for cleaning fired parts.
Change language