Power Analysers & Recorders cont'd. - Ferret

GENERAL INDUSTRIAL & PROCESS MEASUREMENT
Laser Rotational Shaft Alignment
Fixturlaser Dirigo Laser Bases Shaft
Alignment System
FIX,DIRIGO (4940) AU
Measurement resolution to .01mm Shaft diameter
range 40 to 150mm using an extension chain 150 to
500mm. Maximum distance between measurement
units 0.85m. Very simple to use and operate as
shims are applied the alignment can be monitored
in real time. 20h of operation from alkaline
batteries.
Fixturlaser PAT Pulley Alignment System
FIX,PAT (4941) AU
Laser based alignment system for pulley systems. Measurement accuracy
0.5mm (0.2º). 20hrs of operation on AAA batteries. Mechanically self centres
on pulley, will operate successfully even on worn pulley systems.
Pruftechnik 1500mm length Tension Chains
PRU,AL12.116 (4946) AU
1500mm length tension chains for PRU,ROT-ULTRA
Pruftechnik Rotalign Pro Laser
Shaft Alignment Ex
PRU,ROT-PROEX (4943) AU
Laser based rotating shaft alignment system. Maximum
separation between emitter and receiver 10m. Aligns
horizontal and vertical machines, aligns coupled
and uncoupled shafts equally well. Intrinsically safe
system.
Pruftechnik Rotalign Ultra Laser
Shaft Alignment
PRU,ROT-ULTRA (4945) AU
Laser based rotating shaft alignment
system. Maximum separation between
emitter and receiver 10m. Aligns
horizontal and vertical machines, aligns
coupled and uncoupled shafts equally
well. Ultra modern computer design, backlit colour display, Intel XScale
400MHz CPU, USB for peripheral devices, PC, printer, also Bluetooth
communication. Backlit keyboard, rechargeable Li-Ion battery pack. Machine
train alignment - 14 machines. Alignment results in 3 quick steps, thermal
growth computation. Rotalign Ultra Reader software included.
Industrial Process Calibrators
See also Laboratory Calibrators on page 12
Ametek PPCE 700Bar Pressure Calibrator with NATA Certification
AME,PPCE-NATA (4780) MY
High pressure calibrator with pump 700Bar (10,000psi). Digital display with
5 digit resolution. Accuracy over 70Bar ±0.07. Accuracy below 70Bar ±0.35.
Current and voltage measurement ranges 4 to 20mA, 0 to 50mA & 0 to 30V.
Ametek Hydralyte HL2700N Dead Weight Tester
AME,HL2700N MY
Dual range interchangeable piston: 100 to 4,500kPa, 0.5kPa increments,
500 to 22,500kPa, 1kPa increments. Accuracy 0.05% of reading.
Includes special calculator for high accuracy pressure calculations and also
conversion of units.
48
www.techrentals.com.au
Industrial Process Calibrators cont’d.
Barfield Airspeed and
Altimeter Calibration Kit
BAR,1811KIT (4788) AU
Replacement gauges for the 1811
pitot static tester. This kit will keep
an 1811 calibration system operational during calibration downtime. The
DAS650 is a 650 knot range. The DALT55 is for 55k feet.
Beamex BIC200 Instrument Calibrator
BEA,BIC200 (4752) AU
For both electronic and pneumatic instruments. Output ranges settable
to 119.9% of range 0 to 10V, 1 to 5V, 4 to 20mA, 0 to 20mA, 10 to 50mA
& 0 to 50mA. Output source for current ranges 24 & 48V. Input ranges to
measurement ranges 0 to 1Bar & 0.2 to 1Bar. Operates from internal NiCd
batteries or external AC.
Beamex MC5 Multifunction NATA Calibrator
BEA,MC5 (4751) AU
Provides calibration capability for pressure,
temperature, electrical and frequency signals.
HART communication and CMX software provided.
Calibration results can be stored or printed.
Performs as a field-entry device (FED) allowing for
the recording of non-calibration related maintenance
results. Pressure modules included, -1 to 20 bar
and 600 bar (up to 1,000 bar with optional external
transducers). DC voltage and current, frequency, and pulse measurement.
RTD, thermocouple, and resistance simulation and measurement.
Beamex MC5 Intrinsically Safe
Multifunction NATA Calibrator
BEA,MC5-IS (4750)
Provides calibration capability for pressure,
temperature, electrical and frequency signals.
HART communication and CMX software provided.
Calibration results can be stored or printed. Performs
as a field-entry device (FED) allowing for the recording of non-calibration
related maintenance results. Pressure measurement range, -1 to 20 bar
and 600 bar (up to 1,000 bar with optional external transducers). DC voltage
& current, frequency, and pulse measurement. RTD, thermocouple, and
resistance simulation & measurement.
Beamex PGXH, PGM and PGV
BEA,PUMPS (4797) AU
Hand pumps includes hand-held, lightweight pressure
and vacuum sources for field use. The PG series of
hand pumps are ideal pressure/vacuum generators
to be used as accessories for pressure and vacuum
calibration. Kit contains PGXH 0 to 700 bar, PGM 0 to
20 bar, PGV 0 to -0.95 bar.
Crystal nVision Pressure
Calibrator 30b IS NATA
CRY,NVISION-30-NATA (4716) AU
Intrinsically safe pressure calibrator. Displays real-time
recorded data graphically on a high res screen with
ability to zoom into specific events. 500,000 data point
memory records all data from all enabled screens from
two modules simultaneously. Fastest logging interval
10 readings/sec. Configured with MA20 current, voltage and switch test
module and 30 bar pressure module, accuracy to 0.025% of reading. Includes
hand pump and CPF (finger tight to 700 bar) fittings.