Power Analysers & Recorders cont'd. - Ferret

RADIO FREQUENCY
Spectrum Analysers - High Frequency
cont’d.
Airmagnet Wi-Fi Spectrum Analyser
AIR,AIRMAG SPEC AN (2520) AU
Laptop based spectrum analyser. Specifically identify sources of interference
in Wi-Fi bands 2.4-2.5GHz (802.11 b/g) and 4.9-5.9GHz (802.11a), and
track them to their physical source. Automatic and real time identification
of Bluetooth, cordless phones, microwaves, analogue video cameras, RF
jammers and more. Immediately “see” and name each device.
Anritsu MS2711A 3GHz Portable
Spectrum Analyser
ANR,MS2711A MY
Portable spectrum analyser, 9kHz to 3GHz.
Light weight battery powered spectrum
analyser with LCD. Resolution bandwidth
down to 10kHz. Suitable for cellular telephone
walk or drive tests to determine coverage and base station positioning. Can also
be used for VHF/UHF signal surveying. N type connector.
Anritsu MS2711D 3GHz Colour Portable
Spectrum Analyser
ANR,MS2711D (2548) AU
Light weight, battery powered with colour
LCD. Range 9kHz to 3GHz. Resolution
bandwidth from 100Hz to 1MHz. -135
dBm Noise Floor. Can identify the type of
interfering signal. Used in applications such as cellular telephone walk or drive
tests to determine coverage and base station positioning and VHF/UHF signal
surveying. N type connector.
Anritsu MS2711D 3GHz Spectrum Analyser GPS & Interference Analysis
ANR,MS2711D -31-25 (2547) AU
9kHz to 3GHz. Resolution bandwidth from 100Hz to 1MHz. Interference
Analysis opt provides spectrogram display, RSSI and signal strength with
audio output for radio direction finding. GPS function provides Latitude,
Longitude and Altitude with trace storage. Can be used in applications such as
cellular telephone walk or drive tests to determine coverage and base station
positioning and also VHF/UHF signal surveying. N type connector.
Anritsu MS2721A 7.1 GHz Spectrum
Analyser
ANR,MS2721A (2549) AU
For deploying, maintaining and
troubleshooting wireless base stations and
Wi-Fi (802.11a, b and g) systems, and general
spectrum analysis. Smart measurements
include channel power, adjacent channel power ratio, Carrier to Interference
ratio (C/I), and field strength. AM/FM/SSB demodulator is included and internal
speaker for monitoring. Store unlimited traces and setups.
Agilent/HP E4407B 26.5GHz Spectrum
Analyser
HP,E4407B (2540) AU
Frequency range 9kHz to 26.5GHz. Resolution
bandwidth down to 30Hz. Noise level -105
to -136dBm according to frequency. Centre
frequency display with a resolution of up to 10Hz. Stores up to 200 traces in
internal memory and 200 traces on disk.
Agilent/HP 8593E 22GHz Spectrum Analyser
HP,8593E MY
Frequency range 9kHz to 22GHz. Max resolution 30Hz. Noise level -102 to
-127dBm according to frequency. Centre frequency display with a resolution
of up to 10Hz. Some assets include GPIB/parallel and narrow resolution
bandwidth options (041 & 130).
16
Spectrum Analysers - High Frequency
cont’d.
Protek 3290 2.9GHz RF Analyser/Signal Meter
PRO,3290 (2585) AU
RF signal analyser and level meter. Provides spectrum
display up to 2.9GHz, audio output, level measurement,
and frequency measurement. Inbuilt antenna. Frequency
range 100kHz to 2.9GHz with frequency steps from 5kHz.
Modulation types narrow and wide band FM, AM, and SSB.
Level measurement minimum frequency - narrow band FM
1MHz, wide band FM, AM, SSB 10MHz. Bandwidth - narrow
band FM 12.5kHz, wide band FM 180kHz, AM & SSB 2.4kHz.
Rohde & Schwarz FSH3 3GHz Spectrum Analyser/Tracking Generator/
Vector Measurement
RS,FSH3-TG MY
Handheld portable battery operated spectrum analyzer 100 kHz to 3 GHz.
Resolution bandwidth 1 kHz to 1 MHz. Less than -105 dBm noise level (-116 dBm
typical). Colour liquid crystal display. Suitable for RF surveying applications.
Includes tracking generator, VSWR bridge and distance to fault (DTF) options
making it suitable for antenna and cable testing. 4 hours of continuous operation
on battery power. Comes with cable for data transfer to PC.
Rohde & Schwarz FSH3 3GHz Spectrum Analyser/
Tracking Generator/Vector Measurement
RS,FSH3-TG-V (2536) AU
Handheld portable battery operated spectrum analyser
100kHz to 3GHz. Resolution bandwidth 1kHz to 1MHz.
Less than -105dBm noise level (-114dBm typical).
Suitable for RF surveying applications. Includes vector
transmission and tracking generator options.
Rohde & Schwarz FSH6 6GHz Spectrum Analyser/Tracking Generator
RS,FSH6-TG (2537) AU
Handheld battery operated spectrum analyser 100kHz to 6GHz. RBW 1kHz to
1MHz. Noise level to 3GHz, -112dBm; 5 to 6GHz, -102dBm typically. Suitable
for RF surveying applications. Includes, VSWR bridge and DTF options
making it suitable for antenna and cable testing.
Network Analysers/Antenna
& Cable Test
www.techrentals.com.au
Agilent FieldFox 6GHz RF Analyser
N9912A
AGI,N9912A (2145) AU/MY
Cable and antenna analyser. Frequency range 2MHz
to 6GHz. Measures return loss, one-port cable loss,
distance to fault, line sweeping, and VSWR. Applications
include cable & antenna installation and maintenance
for wireless service providers, contractors, military,
aerospace, defence, and public safety applications.
Anritsu S331D 4GHz Colour
Sitemaster Antenna
ANR,S331D (2120) AU/MY
Antenna and cable test set. Frequency range
2.5GHz to 4GHz. Measures return loss, SWR,
cable loss, and distance to fault. Return loss
range 0 to 60dB. SWR range 1 to 65. Distance
to fault range 1,197m. Insertion loss range -120 to +100dB. Cable loss range
(one port) 0 to 30dB. N(f) Type port. Analysis software discs included containing
distance to fault and Smith chart tools. Complete with calibration standard,
AC/DC adaptor, and 12VDC car cigarette lighter adaptor.