PRODUCT CATALOGUE - Ferret

PRODUCT CATALOGUE

Dust Extraction 

Fume Extraction 

Pneumatic Conveying 

Mechanical Ventilation 

Ezi-Duct has the industry experience and the product range to 

solve your companies requirements. 

Ezi-Duct ducting provides the best air flow of any duct on the 

market and is the natural choice for dust collection and pneumatic 

conveying systems as it has a smooth bore tube with pressed 90º 

bends. 

Ezi-Duct Modular Ducting 

Features and Benefits of Ezi-Duct Modular Ducting 

• 

• 

• 

• 

• 

Companies can cut costs considerably as Ezi-Duct modular 

ducting is so simple, quick and easy to install, installation time 

is cut down considerably. 

Many of Ezi-Ducts customers do the installation in-house, 

without the need for outside contractors 

Dust collection and pneumatic conveying systems can frequently 

block up so the advantages for using Ezi-Duct Modular ducting 

products is long term. As Ezi-Duct ducting simply clamps 

together, the customer can easily pull the system apart for 

cleaning if a blockage occurs. 

If a company, relocates premises, changes its machinery or 

expands, the ductwork can be disassembled and reused again 

and again in different layouts. 

Many of Ezi Duct’s product range is available ex-stock for 

immediate delivery. 

Ezi-Duct manufactures its ducting in Australia from Australian 

steel and supplies a huge range of ducting and ducting clamps in 

galvanised, stainless steel and mild steel. Ezi-Duct has decades of 

industry experience and continually trains apprentices to ensure 

our future 

Flexible Ducting 

The Ezi-Flex product range is recognised as the highest quality 

range of flexible ducting on the world market. Manufactured in 

Germany, Ezi-Flex is constructed from the latest high quality 

polyurethane composite materials on the latest high tech 

machinery. The Ezi-Flex product range is also one the largest 

available in the world. 

Other Products supplied by Ezi-Duct include 

• 

• 

• 

• 

• 

EZI-ARM fume arms and fans 

A large range of high quality industrial and commercial fans 

Rotary valves in both cast and fabricated types 

Dust collectors ,Cyclones and Filters 

A large range of filter cartridges and filter bags 

Call us today for a Ezi-Duct representative or agent to call for a 

free quotation. 

TABLE OF CONTENTS 

BENDS 8,9 

CARTRIDGE AND FILTER BAGS 30 

CLAMPS 4,5 

FLANGES 5 

FLEXIBLE HOSE CLAMP 5 

HANGING BRACKET 5 

HANGING BRACKET CLEVIS 5 

LEVER CLAMP 4 

SLIM CLAMP 5 

WIDE CLAMP 5 

CYCLONES 26 

DAMPERS 12, 13 

AIR VENT 13 

BUTTERFLY DAMPER 13 

OVERHEAD DAMPER 13 

PNEUMATIC SLIDE DAMPER 12 

ROSE END 13 

SEALED SLIDE DAMPER 12 

SLIDE DAMPER 12 

SLIDE DAMPER HOSE TAIL 12 

DIVERTER VALVES 30 

DUST COLLECTOR 27 

E-MISSION CONTROL 23 

FANS 25 

EZI-ARM FAN 22 

PORTABLE VENTILATOR 24 

ROOF VENTILATOR 24 

FITTINGS 10,11 

BRANCH PIECES 10 

DOUBLE BRANCH PIECE 11 

DUCT ENTRY 11 

REDUCING CONES 10 

MANIFOLDS 11 

SQUARE TO ROUND TRANSITIONS 11 

“T” PIECES 10 

“Y” PIECES 11 

FLEXIBLE DUCTING 16-20 

AIRDUCT 350 - FOOD GRADE 17 

AIRDUCT 355 17 

AUTOMOTIVE EXCHAUST DUCTING 18 

CP ARAMID 461 PROTECT 19 

CP HiTex 485 18 



CP HYPALON® 450 PROTECT 19 

EZIFLEX PUR-M 16 

FLEXIBLE HOSE CLAMP 20 

HIGH TEMP.W 20 

PUR 335 MHF 17 

PROTAPE® TPE MEMORY 326 19 

METAL FLEXIBLE DUCTING 20 

MINEFLEX 20 

PVCC 20 

TPRD 20 

FLOOR SWEEP 29 

FUME ARMS 21 

INSPECTION DOORS 29 

LATHE HOODS KITS 29 

PNEUMATIC DUCTING SYSTEM 31 

ROTARY VALVES 14- 15 

SILENCERS 28 

STRAIGHT DUCT 6,7 

SUCTION BENCHES 28 

TELESCOPIC DUCTS 29 

WEATHER COWLS 28 

WELD ENDS 29 

When you are buying from Ezi-Duct you are supporting Australian 

manufacturing and you are keeping Australians employed

EZI-DUCT STRIVES TO PROVIDE OUR CUSTOMERS WITH THE BEST 

SERVICE AND PRODUCTS AT THE MOST ECONOMICAL PRICES 

Ezi-Duct's dedicated and experienced team 

will ensure you are a satisfied customer 

EZIDUCT PRODUCT CATALOGUE 

3

CLAMPS 

EZI-DUCT DUCTING CLAMPS MAKE INSTALLING DUCTING EZI 

Ezi-Duct manufactures a large range of Ducting Clamps, Flanges, Flexible Hose Clamps and Hangers. They 

are available in both galvanized and stainless steels. 

Diameter Clamp 

4 EZIDUCT PRODUCT CATALOGUE 

Slim 

Clamp 

LEVER CLAMP 

Designed for ultra quick 

installation and removal. Lever 

has adjustable tension and 

high quality rubber insert. Also 

available with adjustable latch. 

Wide 

Clamp 

Lever 

Clamp 

Hanging 

Bracket 

Flanges 

Hose 

Clamp 

30 - - - - - Y 

50 - - - - - Y 

80 Y - Y Y Y Y 

100 Y - Y Y Y Y 

120 Available upon request 

125 Y - Y Y Y Y 

140 Y - Y Y Y Y 

150 Y - Y Y Y Y 

160 Y - Y Y Y Y 

180 Y - Y Y Y Y 

200 Y Y Y Y Y Y 


225 Y Y Y Y Y Y 

250 Y Y Y Y Y Y 

275 Y Y Y Y Y Y 

300 Y Y Y Y Y Y 

350 Y Y Y Y Y - 

400 - Y Y Y Y Y 

450 - Y Y Y Y - 

500 - Y Y Y Y - 

550 - Y Y Y 

600 - Y Y Y 

650 - Y Y Y 

700 - Y Y Y 

750 & Above Available upon request

CLAMPS 

SLIM CLAMP 

Our biggest selling Clamp. Comes in 2 x 1/2 sections with 

pozi-drive nuts and bolts. 

FLANGES 

We manufacture flat bar and angle, 

drilled or blank flanges to your 

specification 

HANGING BRACKETS 

Our Hangers are manufactured from a 

minimum of 3 mm galvanised steel. They come 

in 2 x 1/2 sections and are supplied with 8mm 

nuts and bolts. Wall brackets or specials are 

made on request. 

WIDE CLAMP 

Ideal for larger 

diameter ducting. 

Comes in 1 

section with 1 x 

8mm bolt. 

FLEXIBLE HOSE CLAMP 

Our hose clamps are made from high quality 

stainless steel for strength and ease of 

installation. They can be pulled down and 

reused. 

HANGING BRACKETS CLEVIS 

Clevis are used when using 

brooker rod to hang the duct. 

Wall mounts to suit hanging 

brackets. 


5

STRAIGHT DUCT 

Ezi-Duct manufactures a large and varied 

range of Straight Ducting in galvanised, 

mild and stainless steel. 

We carry ex-stock galvanised steel Straights 

in lengths of 500mm, 1000mm and 

2000mm. 

Duct comes delivered with Ezi-Duct ends for 

quick assembly using Ezi-Duct Clamps. 

Ezi-Duct uses AUSTRALIAN STEEL 

produced by B.H.P. 


Diameter 

500mm 

LONG 

EX - STOCK 

1000mm 

LONG 

2000mm 

LONG 

80 Y Y N/A 

100 Y Y Y 


125 Y Y Y 

140 Y Y Y 

150 Y Y Y 

160 Y Y Y 

180 Y Y Y 

200 Y Y Y 


225 Y Y Y 

250 Y Y 

275 Y Y Y 

300 Y Y Y 

350 Y Y Y 

400 Y Y Y 

450 Y Y Y 

500 Y Y * 

550 Y Y * 

600 Y Y * 



750 & Above Available upon request 

* available in 1500mm long

STRAIGHT DUCT 


7

BENDS 

Ezi-Duct manufactures a large and varied range of bends in galvanised, mild and 

stainless steels. 

We carry ex-stock galvanised bends in angles of 90 0 

60 0 

, 45 0 

, 30 0 

, 15 0 

, 7.5 0 

. 

To provide the best airflow Ezi-Duct Standard Bends are 1.5 x D1A. C.L.R. of smooth 

pressed construction from 80mm to 400mm diameter. From 350mm to 450mm are 7 

section lobster back construction of 1.5D C.L.R. 

Ezi-Duct can manufacture bends in any radius required upon request. 

Diameter 90 0 


60 0 

80 Y Y Y Y Y Y 

100 Y Y Y Y Y Y 


125 Y Y Y Y Y Y 

140 Y Y Y Y Y Y 

150 Y Y Y Y Y Y 

160 Y Y Y Y Y Y 

180 Y Y Y Y Y Y 

200 Y Y Y Y Y Y 


225 Y Y Y Y Y Y 

250 Y Y Y Y Y Y 

275 Y Y Y Y Y Y 

300 Y Y Y Y Y Y 

350 Y Y Y Y Y Y 

400 Y Y Y Y Y Y 

450 & Above Available upon request 

45 0 

30 0 

15 0 

7.5 0 

E 

X 

- 

S 

T 

O 

C 

K

BENDS 


9

FITTINGS 

All Ezi-Duct fittings are designed and 

manufactured using the latest computer 

controlled design and cutting equipment. 

This ensures that all our fittings are 

extremely accurate and of the highest 

quality. 

Standard Fittings are manufactured from a 

minimum of 0.8mm galvanised steel supplied 

from B.H.P. 

All Fittings come standard with Ezi-Duct ends 

for quick assembly using Ezi-Duct Clamps. 

On all Branch Pieces, “Y” Pieces and Manifolds 

the take off angle comes standard @ 30 0 for 

optimal airflow. 

Ezi-Duct can manufacture fittings in 

galvanised, mild or stainless steel and in 

whatever material thickness is required. 

When ordering a fitting please quote the 

A, B & C measurements and length 

(If required) 

REDUCING CONE 

BRANCH PIECES 


COMPUTER CONTROLLED DESIGN 

• BRANCH PIECES 

• “Y” PIECES 

• REDUCING CONES 

• SQUARE TO ROUND 

TRANSITIONS 

• DUCT ENTRIES 

• MANIFOLDS 

• “T” PIECES 

PLASMA CUTTING

FITTINGS 

SQUARE TO ROUND TRANSITIONS 

MANIFOLDS 

DOUBLE BRANCH PIECE 

“Y” PIECES 

DUCT ENTRY 


11

DAMPERS 

Ezi-Duct manufactures a large range of Dampers to 

suit every application. 

They are supplied in galvanised, mild or stainless 

steel and many are AVAILABLE EX-STOCK. 

Dampers can be fitted with pneumatic or electric 

actuators for automatic operation. 

All Dampers come standard with Ezi-Duct ends for 

quick assembly using Ezi-Duct Clamps. 

SEALED SLIDE DAMPER 

The Sealed Slide Damper has 

an industrial nylon seal that provides 

the damper with a seal when closed. 


SLIDE DAMPER 

A robust Damper with a 2mm blade that 

cannot be removed 

SLIDE DAMPER HOSE TAIL 

The same as a Slide Damper but has one 

end with a spigot for flexible hose. 

PNEUMATIC SLIDE DAMPER

DAMPERS 

OVER HEAD DAMPER 

This Damper is used in over head lines 

that cannot be reached from ground 

level. 

It is designed to operate on a chain or 

cord 

ROSE END 

Used mostly in the milling industry. Rose Ends are 

used as a bleed damper 

AIR VENT 

Air Vents are used as an “In Line” bleed damper 

BUTTERFLY DAMPER 

Designed to control the volume of air 

passing through a duct. Comes with a 

lockable quadrant. 


13

ROTARY VALVES 

Ezi-Duct supplies a range 

of high quality rotary 

discharge valves for 

various applications. 

Valves are supplied with 

motor and gearbox ready 

to install and are available 

ex-stock. 

Rotary 

Valves 

A 

mm 


B 

mm 

C 

mm 

D 

mm 

R.V.250 250 315 280 150 30 15 350 370 285 300 

R.V.500 500 565 530 150 30 15 415 370 285 300 

R.V.1000 1000 1065 1030 150 30 15 415 370 285 300 

R.V.W5000 500 580 5030 4x135 40 20 525 580 500 600 

E 

mm 

F 

mm 

G 

mm 

H 

mm 

J 

mm 

K 

mm

CAST ROTARY VALVES 

Description 

The Ezi-Duct cast iron rotary valve has 

internally machined surfaces that permit 

free movement of the impeller whilst 

maintaining an airtight seal. 

Operating Principle 

Product is fed through the square inlet 

opening and is moved through an airlock 

by a rotating impeller, and discharged on 

the opposite side. 

Construction 

Cast iron, with machined internal surface. 

Model 

Volume 

per 

round 

(L/ 

round) 

Motor 

power 

(kW) 

Valve 

speed 

(rpm) 

Working 

temp 

(oC) 

Dimensions (mm) 

A B C A1 B1 C1 H E 

Flange hole 

diammeter 

RV2 2 0.55 24

FLEXIBLE DUCTING 

EZIFLEX PUR-M (MEDIUM) 

FEATURES 

• medium-heavy model 

• high axial compressibility 

• abrasion proof 


CONSTRUCTION 

1. steel wire spiral integrated 

in hose wall 

2. extruded tape 

3. wall thickness approx. 0,6 mm 

MATERIAL 

• wall: pure polyurethane 

• spiral: steel wire 

APPLICATIONS 

Suction and blast hose especially 

suitable 

• for light abrasive solids such as 

dust, powder, fibres and chips 

• for gaseous media such as oil 

vapours and welding smoke 

PROPERTIES 

• high axial compressibility (3:1) 

• abrasion proof 

• light 

• very flexible 

• kink-proof 

• very good flexibility at low temp 

• good resistance to oil and fuel 

vapours 

• good resistance to chemicals 

• gas and liquid tight 

• electrostatic discharge by grounding 

the spiral (according to ZH 1/200)) 

TEMPERATURE RANGE 

• approx. –40°C to approx. +90°C 

• for short periods up to +125°C 

I.D. Recommended Operating Limits Bending Radius 

Possitive Pressure Negative Pressure (middle of hose) 

Weight Stock Length Order No. 

mm bar bar mm kg/m m 

EZIFLEX PUR-M (MEDIUM) 

40 0,615 0,234 56 0,37 10 PUR-M- 40 

52 0,615 0,234 56 0,37 10 PUR-M- 52 

63 0,515 0,189 66 0,44 10 PUR-M- 63 

76 0,410 0,126 81 0,53 10 PUR-M- 76 

82 0,385 0,117 85 0,57 10 PUR-M- 82 

90 0,310 0,081 105 0,66 10 PUR-M- 90 

102 0,310 0,081 105 0,66 10 PUR-M- 102 

115 0,270 0,070 119 0,76 10 PUR-M- 115 

120 0,260 0,068 124 0,79 10 PUR-M- 120 

127 0,250 0,054 129 0,81 10 PUR-M- 127 

140 0,220 0,054 144 0,92 10 PUR-M- 140 

152 0,205 0,054 153 0,98 10 PUR-M- 152 

160 0,195 0,047 163 1,02 10 PUR-M- 160 

180 0,175 0,036 182 1,17 10 PUR-M- 180 

203 0,155 0,036 202 1,30 10 PUR-M- 203 

229 0,140 0,025 226 1,47 10 PUR-M- 229 

254 0,125 0,014 250 1,62 10 PUR-M- 254 

279 0,105 0,013 300 2,10 10 PUR-M- 279 

305 0,105 0,013 300 2,10 10 PUR-M- 305 

356 0,090 0,090 348 2,53 10 PUR-M- 356 

406 0,080 0,007 397 2,88 10 PUR-M- 406


FOOD GRADE FLEX DUCTING 

AIRDUCT 355 

FEAURES: 

APPLICATIONS: 

• Highly abrasion-proof 

Universal abrasion-proof suction and 

• Smooth interior 

transport hose, especially suitable: 

• Increased pressure and vacuum • for high flow-rates of abrasive 

efficiency 

solids such as powder, chips and 

granules 

CONSTRUCTION: 

• for gaseous and liquid media 

1. Spring wire firmly embedded in wall • for industrial vacuum cleaners, 

2. Profile with optimized flow properties 

3. Wall thickness 1.5 mm approx. 

granulated conveying systems, 

printing machines, blowers and 

commpressors 

MATERIAL: 

• as robust protection hose 

Wall: Special premium esterpolyurethane TEMPERATURE RANGE 

Spiral: Spring Steel Wire 

• 40°C approx. to + 90°C approx. 

• short time to +125°C approx. 

AIRDUCT 350 

FEAURES: 

• 

• 

• 

• 

Highly abrasion-proof 

Smooth interior 

Increased pressure and vacuum 

efficiency 

food grade approved 

CONSTRUCTION: 

1. Spring steel wire firmly embedded in 

wall 

2. Profile with optimized flow properties 

3. Wall thickness 0.7 mm approx. 

MATERIAL: 

Wall: Special premium etherpolyurethane 

Spiral: Spring Steel Wire 

Special Hose PUR 335 MHF 

GENERAL PROPERTIES 

• 

• 

USP: 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

Extrude Tape 

Wall Thickness 1.0 mm 

APPLICATIONS: 

Abrasion-proof suction and blast 

hose, especially suitable: 

• for abrasive solids such as 

dust, powder, fibres, chips and 

granulates 

• for gaseous and liquid media 

• for public utility street cleaning 

vehicles 

• for lawnmowers, grass sweeping 

machines and leaves exhaust 

• for feed transport 

TEMPERATURE RANGE 

Pre-PUR® is highly abrasion proof (abrasion 

resistance about 2.5 to 5 times better than most 

rubber materials and about 3 to 4 times better than 

most soft PVC´s) 

long service life 

less downtime 

PUR hoses are more flexible and have less weight 

than rubber hoses 

Far better in price than silicon hoses 

Transparent 

process can be monitored 

Vibration resistant welding seam 

Smooth interior 

• 

• 

-40°C approx. to + 90°C approx. 

short time to +125°C approx. 


17


AUTOMOTIVE EXHAUST & HIGH TEMP. FLEX DUCTING 


CP HiTex 485 


• Patented CP construction 

• Multi layer 

• insulated 

• Exhaust gas temperature to +500° C 

USP: 


> suitable for light overpressure 

• Patented multi-layer construction 

> allows extremely high temperature 

> difference between inside and outside of the hose 

> longer service life 

CP HiTex 486 


• 

• 

• 

• 

Patented CP construction 

Multi layer 

insulated 

Exhaust gas temperature to +650 °C (short time +700 °C) 

USP: 


> suitable for light overpressure 



> difference between inside and outside of the hose 


CP HiTex 483 


• 

• 

• 

• 


Multi layer 

insulated 

Exhaust gas temperature to +900 °C (short time +1.100 °C) 

USP: 




> difference between inside and outside 

> of the hose 

> longer service life


PROTAPE® TPE MEMORY 326 


• Fully crush-proof 

• Exterior folds 


USP: 

• Flow-optimised outer convolution ensures an extremely high delivery 

rate (+5% inside diameter when bended has an effect of +10% on / 

crosssectional area): 

> low pressure loss 

> reduction of blower power requirements 

> lower operating costs 

> lower temperature inside the hose 


• Fully crush proof (instead of hoses with PP spiral) 

• Reduction of weight (compared with rubber hoses or TPE hoses with PP 

spiral) 

• Small bending radius 

• Exterior abrasion protection (also coloured) 

CP HYPALON® 450 PROTECT 


• 

• 

USP: 

• 

• 

• 

• 

• 

• 

• 


Exhaust gas temperature to +200° C 


Exterior abrasion protection (also coloured) to avoid paint damage 

CP Protect one clamp-cover and two end-caps included 

Exterior abraison protection (also coloured) to avoid paint damage 

Airtight coating (superior to competition) high delivery rate 

less risk of unhealthy gas leakage 

Vibration resistant longer service life 

CP ARAMID 461 PROTECT 




USP: 


• Exterior abrasion protection (also coloured) to avoid paint damage 

• CP Protect one clamp-cover and two end-caps included 

• Exterior abraison protection (also coloured) to avoid paint damage 

• Airtight coating (superior to competition) high delivery rate 

> less risk of unhealthy gas leakage 

• Vibration resistant 



19


PVCC 

PVCC is an ideal product for 

use in light to general dust and 

fume extraction applications. It 

is constructed from a tough PVC 

material with a spring steel helix. 

Being manufactured from clear 

PVC, it allows operators to monitor 

inside the duct work if there is 

a blockage of material. PVCC is 

available in 10 Meter Lengths. 

Temp. Range 0°C To 

50 °C 

FLEXIBLE HOSE CLAMP 

Our Hose Clamps are made from 

high quality stainless steel for 

strength and ease of installation. 

They can be pulled down and 

reused. 


TPRD 

TPRD is an ideal product for higher 

temperature dust and fume extraction 

applications. It is constructed from 

thermo plastic rubber material with 

a spring steel helix. TPRD has good 

abrasive qualities and is U.V. 

resistant. TPRD is available in 10 Meter 

Lengths. 

Temp. Range –40 °C to 120 °C 

MINEFLEX 

Mineflex is constructed with a 

yellow polyethylene woven fabric. 

As the name “Flex” indicates, this 

product has a wire spinal helix 

which provides flexibility and avoids 

kinking. The joining mechanism is 

the skirt 

connecting method consisting 

of eyelets and a sleeve enabling 

connection with Mineflat. 

HIGH TEMP. W 

High Temp. W is suitable for 

high temperature working 

conditions such as foundries. 

It is constructed from PTFE 

teflon coated glasscloth 

crimped by a helically wound 

steel strip. 

Temperature Range: 0°C to 

225°C 

METAL FLEXIBLE DUCTING 

Metal Flex is manufactured from 

helically wound metal strips. It 

is extremely hard wearing and is 

suitable for heavy duty dust and 

fume extractions and extraction of 

hot gases. Temp Range –50°C to 

250°C This product is also available 

manufactured from 304 2B stainless 

steel.

FUME ARMS 

The Ezi-Duct EZI-ARM is a 

self supporting suction arm 

that is the best technical 

solution for the extraction of 

fumes & dust. It’s design has 

no internal obstructions that 

cause turbulence and snag 

points. The flexible ducting 

has been kept to a minimum 

due to the high friction 

loss and wear possibilities 

associated with this product. 

The EZI-ARM has a 3000mm 

reach and is 150mm in 

diameter. The EZI-ARM can 

rotate 360 degrees and is 

designed with an ease of use 

principle for the operator. 

This enables an enormous 

number of suction hood 

positions. 

9 

19 

2 

22 

26 

6.1 

7 

48.1 

6 

24 

1 

31 

48.2 

48 

73 

9 

4 

44 

16 

14 

33 

5 

29 

29.1 

EROL EXPORTS (P)LTD. 

35 35.1 

DRG # E/367 

SHEET 1 OF 2 

40.1 11 

39 

12 

25 

13 

40 

30 

46 

8 

1 

27 

2 

64 

31 32 

3 

43 

36 

15 

63 

24 

34 

41 

18 

21 

9 

22 

26 

23 

20 

47 

42 

19 

62 61 

60 

Light & anti-spark screen optional 


21

EZI-ARM FAN 

Ezi-Duct also has a range of industrial quality Centrifugal Fans that complement the EZIARM. 

CBS315 

3000 mtr3 per hour @ 1500 pa 

( for 1 -2 arms) 

CBS400 


( for 5 -6 arms) 


CBS355 


( for 3 -4 arms)

E-MISSION CONTROL 

• Reverse-Pulse Cleaning 

• 2.2 kW Fan 

• Floor And Wall Mounting 

• Carbon Filter For Odour Removal 

• Cartridge Filters 20 m2 Total Filter Area 

• Heavy Duty Rubber Castor Wheels 

• Provision For 2 Fume Arms 

• Airflow 1400 m3/h To 3000 m3/h 

Description 

The Polex e-MISSION Control Mobile Dust 

Collector has been designed to suit a wide range 

of applications. These units are ideally suited 

to continuous operation since the filters are 

continuously cleaned while in operation. 


Polluted air enters through one or two inlets in the 

top casing and is directed through a baffle and 

then upwards through a set of cartridge filters. The 

larger dust particles drop out into the dust tray 

while the lighter and finer particles continue into 

the cartridge filters. The cleaned air then enters the 

clean-air chamber where an array of blow-tubes 

are positioned. Compressed air is ejected through a 

solenoid valve which travels through the blow tubes 

and into the cartridge filters. The compressed air 

causes the dust to fall off the filters and collect in 

the bin below. The cleaned air is then discharged to 

atmosphere through an activated carbon filter, or 

can be connected to discharge ductwork. 

Filters 

Antistatic Spun Bonded Polyester with PTFE 

membrane. 

Construction & Finish 

1.2 mm thick folded mild steel construction, 

Powdercoated inside and outside 

Electrical 

Electric motor starter with start/stop push buttons, 

automatic electronic timer for filter cleaning, hour 

meter and light for changing filters. 


23

PORTABLE VENTILATOR & ROOF VENTILATOR 

PORTABLE VENTILATOR 

The Ezi-Duct Portable 

Ventilator is the perfect 

economical solution for 

the extraction of fumes, 

light airborne dust, welding 

fumes, odours and hot 

air from workshops, 

warehouses, tunnels, 

building sites and confined 

areas. 

It is also ideal for positive 

ventilation of confined 

areas, underground pits and 

tunnels, silos, marquees, 

ships and boats. 

MODEL 

BLADE 

SIZE 

MM 

FAN 

SPEED 

RPM 

Ezi-Duct ROOF VENTILATOR fan 

series 

The Ezi-Duct Roof Ventilator fan is 

the perfect solution for ventilating 

and cooling down factories and 

warehouses. 


Air is moved vertically through an 

axial fan impeller and discharged 

uniformly beneath the rain-cap. 


The Ezi-Duct Portable 

Ventilator comes standard 

with 5 metres of flexible 

ductwork and can be 

supplied with an additional 5 

metres of flexible ductwork 

on request. 

All fans have 240 volt, 50 

Hz, 2 pole, single phase 

motors. 

FULL 

PRESSURE 

PA 

AIR VOLUME 

M3/HOUR 

VOLTAGE 

Construction 

Non corrosive, lightweight Materials. 

POWER 

KW 

WEIGHT 

KG 

PV200 200 2800 245 1500 240 0.15 9 350X285X340 

PV250 250 2800 294 2580 240 0.32 12 345X325X380 

PV300 300 2800 343 3600 240 0.52 14 410X375X435 

PV400 400 2800 410 5400 240 1.2 24.8 525X490X520 

PV450 450 2800 520 7500 240 1.7 27.5 510X510X565 

ROOF VENTILATOR 

Model D Dia H1 C C1 B E H M (d1xL1) kg 

3 650 300 60 480 504 510 350 545 M8x250 15 

4 650 400 60 600 622 630 350 585 M12x250 20 

5 1000 500 60 700 740 750 500 715 M12x300 25 

6 1000 600 60 800 858 870 500 765 M12x300 35 

Model Max Airflow (m3/h) Fan Speed (rpm) Motor Power (kW) 

3 1650 1450 0.37 

4 5700 1450 0.55 

5 8000 1450 0.55 

6-6 11000 960 1.1 

6-4 15000 1450 1.5 

SIZE 

MM

FANS 

Ezi-Duct supplies a large range 

of industrial fans to cover 

any application. All fans are 

custom made to the customer’s 

requirements of airflow and 

pressure. 

Ezi-Duct extensive fan range 

includes: 

• Centrifugal in both Clean Air 

and Material Handling types 

• High pressure 

• Chopper 

• Double inlet 

• Axial Flow 

Fans are manufactured in 

painted mild steel finish or can 

be supplied in stainless steel. 

All fans can be fitted with EXP 

motors on request. 

Stainless Steel Centrifugal Fan Centrifugal Fan 

Centrifugal Fan 

High Pressure Centrifugal Fan 

Axial Flow Fan 


25

CYCLONES 

Ezi-Duct manufactures a large range 

of Cyclones. Cyclones are fabricated to 

customers requirements or Ezi-Duct has 

several designs that customers are welcome 

to order. 

Cyclones are manufactured from galvanised 

steel or in stainless or mild steel on request. 

Cyclone 

Type C.V 

A 

mm 

B 

mm 


C 

mm 

D 

mm 

E 

mm 

F 

m3/Hr CV400 285 125 250 400 200 1600 1100 1790 1020 710 400 2 

CV500 350 160 250 500 200 2500 1200 1790 1020 710 400 2 

CV700 445 200 400 700 300 5000 1400 2500 1405 995 419 2 

CV1000 560 300 550 1000 400 8000 1700 3725 2050 1500 615 2 

CV1300 750 400 700 1300 450 15000 2000 5090 2820 2000 780 3 

CV1600 1100 500 800 1600 550 25000 2300 5420 3150 2000 1050 3 

CV1800 1500 500 1000 1800 650 35000 2500 6250 3450 2500 1150 3 

G 

mm 

PLEASE NOTE ! 

Cyclone designs provided by Ezi-Duct Pty Ltd are supplied in good faith as a guide to customers 

only. Ezi-Duct Pty Ltd does not design or install Dust Collection or Pneumatic Conveying Systems 

and takes no responsibility for system’s performance excluding manufacturing defects or faulty 

workmanship. 

H 

mm 

I 

mm 

J 

mm 

K 

mm 

S 

mm

DUST COLLECTOR 

Through it’s associated companies, 

Ezi-Duct supplies a large range of Dust 

Collectors. The range includes: 

• Reverse Pulse Cartridge Collectors, 

• Reverse Pulse Bag House Collectors, 

• Shaker Bag House Collectors, 

• Shaker Envelope Bag Collectors 

• Scrubbers 

All the Dust Collectors Ezi-Duct supplies 

are Australian designed units that 

have come from a combined effort of 

group of engineers with over 50 years 

combined industry experience. 

The range of Dust Collectors have been 

designed with the customers needs such 

as Ease of operation, Efficiency, Energy 

Consumption,Size and Appearance of 

the unit as paramount. 

They offer many unique features and 

are the most economical units to 

purchase on the market. 

Shaker Bag House Collectors 

Reverse-Pulse Cartridge Collectors 

Reverse Pulse Bag House Collectors 

Reverse-Pulse Cartridge Collectors 

Reverse Pulse Bag House Collectors 

Shaker Envelope Bag Collectors Reverse Flow Bag Filter Dust Collectors 


27

OTHER PRODUCTS 

DISCHARGE 

WEATHER 

COWLS, STACKS 

& JETCAPS 

Ezi-Duct manufactures a 

large range of Weather 

Cowls, Vertical Discharge 

Stacks and JetCaps. 

Weather Cowls can be 

manufactured in stainless 

steel, heavy gauge material 

or in square or rectangular 

configurations. 


SILENCERS 

To reduce noise levels, Ezi-Duct manufactures a 

large range of duct silencers. They are available 

in all diameters and come in standard lengths of 

500mm, 1000mm and 2000mm Long. 

Delivered standard with Ezi-Duct Ends for quick 

installation with Ezi-Duct Clamps. Ezi-Duct also 

manufactures silencers in stainless steel, heavy 

gauge material, square or rectangular sizes and 

acoustic enclosures. 

Jetcap Weather Cowl Flap Type 

6 x 1250 mm dia. stacks with Axial 

flow fans & weather cowls flap type 

SUCTION BENCH 

Suction Benches are an ideal way 

to reduce airborne dust in sanding 

and grinding application. Ezi-Duct 

manufactures a range of Suction 

Benches in various styles and sizes 

to suit your application. 

Weather Hat 

Vertical Discarge Stacks


WELD ENDS 

Weld Ends are 50mm long section 

of Duct with an Ezi-Duct end one 

end and a raw edge the other end. 

They are manufactured from 2mm 

Steel and are useful for machine 

connections at the start or end of 

a ducting run. They are available 

in all diameters. 

INSPECTION DOORS 

Inspection Doors are supplied in 

kit form for on site installation or 

can be fitted by us in any section 

of duct you request. 

FLOOR SWEEPS 

Floor Sweeps make cleaning 

your workshop an easy task. 

Simply lift the door then 

sweep the dust into the floor 

sweep. 

They are available in 

diameters of 80mm to 

200mm. Other styles can be 

manufactured on request. 

LATHE HOOD KITS 

Perfect for wood lathes. 

Ezi-Duct Lathe Hood Kits are 

adjustable from side to side, up 

and down from front to back. 

The oval shape hood can be 

turned 90 0 when working 

on bowls or can be removed 

alltogether. 

They come in 2 standard sizes 

for long and short bed lathes. 

TELESCOPIC DUCTS 

Telescopic Ducts are adjustable 

lengths of duct that eliminate the 

need for cutting when installing 

your ducting system. They enable 

you to vary the length of duct from 

50mm to 450mm. 

SPECIALTY HOODS 

Ezi-Duct can manufacture hoods 

for any application in any size 

or material required by our 

customers . 


29


CARTRIDGE AND FILTER BAGS 

Spare cartridge-filters and bag-filters 

are available from Eziduct to suit a 

large range of dust collectors. They 

can be supplied in different materials 

to suit the specific application. 

Eziduct also supplies valves and other 

dust collector consumables. 

DIVERTER VALVES 

Diverter valves are designed to 

change the direction of air flow 

when conveying materials 

pneumatically. They are 

available in all diameters in 

Branch or “Y” configurations 

and the take off angle can be 

varied to suit your application. 

(Standard is 30 0 ) 

They can be manufactured in 

stainless steel, heavy gauge 

material, and in square or 

rectangular styles. Diverter 

valves can be fitted with 

pneumatic or electric actuators 

for automatic operation. 

30 EZIDUCT PRODUCT CATALOGUE

PNEUMATIC DUCTING SYSTEM 

Straights 

Pneumatic System Ducting, is made for quick, tight 

and smooth assembly which ensures high transport 

capacity and careful transport. Ideal for plastic and 

grain handling. 

The fully-rolled edges gives the system extra strength 

and very few transport damages. 

Divertor Damper 

Cyclones 

Bends Weld Ends 

Pipe Bracket QR Clamp Slide 

Reducer 

Telescopic Duct 

Venturi 

Hopper 

Cyclone HD 


31

OTHER SERVICES 

Ezi-Duct boasts a fully equipped Sheet Metal 

and Fabrication Factory. We can offer the 

following services to our customers 

• 

• 

• 

• 

• 

• 

Computer Controlled Plasma Cutting 

Roll Forming Facilities 

General Sheet Metal Fabrication 

Stainless Steel Sheet Metal Fabrication 

General Fabrication and Welding 

(MIG and TIG) 

EZI-DUCT PTY. LTD. 

HEAD OFFICE 

343-345 Chisholm Rd, 

Auburn NSW 2144 

TEL: 02 9645 2333 

FAX: 02 9645 5666 

A B N 6 9 0 7 8 5 1 9 9 3 6 

EMAIL: eziduct@bigpond.com.au 

WEBSITE: www.eziduct.com.au 

VICTORIA 

36 Attenborough St, 

Dandenong VIC 3175 

TEL: 03 9791 8477 

FAX: 03 9791 8422 

QLD, SOUTH AUSTRALIA, WESTERN AUSTRALIA, TASMANIA , NORTHERN TERRITORY 

FREE CALL: 1800 673 828

PRODUCT CATALOGUE - Ferret

Create successful ePaper yourself

Delete template?

Save as template?