UltraVoice Manual - Alerting & Notification

Example DTMF Report String
Federal Signal UltraVoice
Installation and Operation Manual
Received DTMF report string = * 0 D 3 D D 5 7 C 1 0 B 6 *
*
Starting character
OPTIONS
75
Description of Status Report
0 Siren type MOD6024 (six amplifiers)
D3 Currently running code (0000) (0011) which equals the number 03.
DD5 Siren site number (0000) (0000) (0101), which equals site number 005
7 Sensor status is (0111), Bit 1 is 1, Amp 1 is bad or not active
Bit 2 is 1, Amp 2 is bad or not active
Bit 3 is 1, Amp 3 is bad or not active
Bit 4 is 0, Amp 4 is active and good
C Sensor status is (1111), Bit 1 is 1, Amp 5 is bad or not active
Bit 2 is 1, Amp 6 is bad or not active
Bit 3 is 1, Amp 7 is bad or not active
Bit 4 is 1, Amp 8 is bad or not active
1 Sensor status is (0001), Bit 1 is 1, Amp 9 is bad or not active
Bit 2 is 0, Amp 10 is active and good
Bit 3 is 0, Amp 11 is active and good
Bit 4 is 0, Amp 12 is active and good
0 Sensor status is (1010), Bit 1 is 0, Battery is good
Bit 2 is 1, Master Current is not active
Bit 3 is 0, Signal B is active
Bit 4 is 1, Signal A is not active
B Sensor status is (1110), Bit 1 is 0, Intrusion has not occurred in cabinet 1
Bit 2 is 1, Not used
Bit 3 is 1, AC power is off
Bit 4 is 1, Charger is active
6 Sensor status is (0110), Bit 1 is 0, Rotation has occurred
Bit 2 is 1, Not used, input not active
Bit 3 is 1, Spare is not active
Bit 4 is 0, False alarm has occurred
* Terminating character
For serial transmission, the above report string is converted to an 8-bit ASCII value by
adding an offset of 30 Hex.