UltraVoice Manual - Alerting & Notification

8.5 Serial Port Control
All control functions may be activated by
the serial port control using 7 character
ASCII strings.
Serial port configuration:
Flow Control None (three wire
interface)
Baud Rate 1200
Parity None
Data Bits 8
Stop Bits 1
Serial command dictionary:
*_ARM__
*CANCEL
*_VOICE Public Address
*Q_TEST
*DISARM
*ZONEA_ Rotate to Zone A.
*ZONEB_
*ZONEC_
*ZONED_
*REPORT
*RESET_ Cancel any
functions and clear
latched status bits.
*MSG_A_ Digital voice MSG1
*MSG_B_
*MSG_C_
*MSG_D_
*MSG_E_
*MSG_F_
*MSG_G_
*MSG_H_
*MSG_I_
*MSG_J_
*MSG_K_
*MSG_L_
*MSG_M_
*MSG_N_
Federal Signal UltraVoice
Installation and Operation Manual
OPTIONS
72
*MSG_O_
*MSG_P_ Voice MSG 16
.*_WAIL_
*P_WAIL
*A_WAIL
*STEADY
*P_STDY
*A_STDY
*_AUX__
*PHASE+ Enable turbo mode
forward direction
*PHASE- Enable turbo mode
Backward direction
*LOWPWR Low Power Mode
*xxxxxx Zone command: x
= 1 for enable zone;
x = 0 for disable
zone.
CODExx xx = user program
number to run (1-
50).
Example:*CODE01 will run
program 01; *CODE02 will run
program 02
8.6 Status Monitoring:
The UltraVoice siren controller monitors
various diagnostic conditions for
reporting back to a central monitoring
station using optional control and status
monitoring hardware and software.
Status items monitored:
Siren Type
Function State (Code running)
Unit ID