Group 1
Group 1
Group 1
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R11: If there are any buttonSignal then there will be an acoustic and optical<br />
warning from multifunctional display.<br />
R12: All accState will also can be seen in multifunctional display.<br />
R13: If there are accelSignal or brakeSignal from the driver when the ACC is<br />
activated then the ACC will be overridden.<br />
Consolidate Requirements<br />
SM1: The system should make the driving more convenience.<br />
Driving will be more convenience when the Driver can easily control the car in<br />
all possible cases. It should be possible to set the current speed as a desired<br />
speed. The car should drive with the desired speed until the driver brakes or<br />
the speed is one minute above the desired speed. The car should accelerate<br />
up to the desired speed when the distance is big enough and decrease Speed<br />
if the speed is lower than the desired speed and the distance are close<br />
enough. It should also be possible to resume to the last default speed after<br />
breaking.<br />
Necessary:<br />
(R1, R2, R3, R4, R5, R6, R8, R9)<br />
• Sufficient :<br />
(R1 ٨ R2 ٨ R3 ٨ R4 ٨ R5 ٨ R6 ٨ R9 ٨ F2 ٨ F3 ٨ F4 ٨ F5 ٨ F6 ٨ F8 ٨ F9 ٨<br />
A2) ٨<br />
(R8 ٨ R9 ٨ F2 ٨ F3 ٨ F4 ٨ F5 ٨ F6 ٨ A2 ٨ A3) ٨ (R5 ٨ F9 ٨ F10 ٨ A2 ٨ A3)<br />
<br />
SM1<br />
SM2: The system should make driving of the car safer.<br />
Driving will be safer when the system can easily detects an object in front of<br />
the car. The speed should be automatically decreased when the car ahead (or<br />
another object) is within a certain distance according to the current speed. In<br />
case the system fails, the engine is remotely controlled by actuators which<br />
connect the acceleration pedal with the engine.<br />
٨<br />
Summary:<br />
• Necessary :<br />
(R6, R7, R8)<br />
• Sufficient :<br />
(R6 ٨ R7 ٨ F1 ٨ F2 ٨ F3 ٨ F5 ٨ F6 ٨ F7 ٨ F9 ٨ A2 ٨ A3) ٨ (R8 ٨ F1 ٨ F2 ٨ F3<br />
A3) SM2<br />
R’ = {R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13} (mission critical<br />
requirements)<br />
Requirements R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 and R13 are<br />
“need to have”<br />
All requirements will be implemented.<br />
Page 7