1 - IAEA Nuclear Data Services

- 157 -
4.2.4. Corrections for Measurements with Proton Recoil
Counters
The programs WALLEND, FITPRO, and SERECO (Aldermaston)
have "been modified and partly corrected. WALLEND has
been used on the IBM 7090 (360) for the calculation
of the influence of wall- and end corrections for cylindrical
counters on the measurement of proton recoil
spectra.
With program FITPRO background and dead-time corrections
of the experimental proton recoil spectra and comparisons
between the corrected spectrum and the theoretical
one obtained from WALLEND have been performed.
SERECO has been used for the calculation of geometrical
corrections and energy degradation of recoil protons.
An IBM 7090 (360) program in FORTRAN IV for the calculation
of complicated integrals for the flux of recoil
protons has been written. The program is being tested.
4.2.5. Total Cross Section Data Reduction in the High Energy
Range
A PORTRAIT program for data plotting, dead-time corrections,
calculations of transmissions and total cross
sections has been written and used to process carbon
data.
4.3. System Analysis and Programming
H. Horstmann, H. Schmid
4.3.1. Programming of the IBM 1800
A system of on-line and off-line data analysis programs
for the IBM 1800 is being written and tested.
This system includes interrupt routines for digital
data input, on-line data reduction and display functions,
off-line calculations, a complete set of plotter routines,
teleprocessing programs, and many general utility
routines.