Eco Compact H1 Series - Ferret

More documents

Recommendations

Info

Specifications Power supply Air filter Power consumption Running current Power factor Model Capacity Cooling (kW) Heating (kW) Low temp. heating (kW) Dimensions Height (mm) Unit (Standard panel) Width Depth (mm) (mm) Weight Unit (Panel) (kg) Electrical characteristics 50 Hz Fan Cooling (kW) Heating (kW) Cooling (A) Heating (A) Cooling (%) Heating (%) Type Motor output (kW) H (m Air flow amount M L 3 /min.) (m3 /min.) (m3 /min.) External static pressure (Pa) Sound pressure level H M (dB (A)) (dB (A)) L (dB (A)) Refrigerant (Flare connections) Drain piping Liquid (mm) Gas (mm) Piping connection Colour Munsell number Remote controller Model name PHAP56FSN2 (P56) 5.6 6.3 6.7 210 1100 670 26 0.09 0.09 0.42 0.42 89 89 0.035 14 12 10 41 38 35 6.4 12.7 PHAP71FSN2 (P71) 7.1 8.0 8.5 210 1320 670 30 0.12 0.12 0.57 0.57 88 88 0.050 18 15 12 41 38 35 9.5 15.9 PHAP80FSN2 (P80) 8.0 9.0 9.5 210 1320 670 30 Single phase, 240 V, 50 Hz 0.12 0.12 0.57 0.57 88 88 Polypropylene, mould proof Sirocco fan 0.050 18 15 12 41 38 35 9.5 15.9 VP20, external Silky white (2.5Y8.9/1) PLPAR PHAP112FSN2 (P112) 11.2 12.5 13.2 270 1320 670 34 Dimensions (Unit: mm) P56 to P140 0.22 0.22 1.02 1.02 90 90 0.095 25 21 18 45 42 39 9.5 15.9 PHAP140FSN2 (P140) 14.0 16.0 17.0 270 1580 670 42 (1) The rated capacity is the system performance by a standard indoor/outdoor unit combination with a 7.5 m piping length and 0 m level difference. Cooling capacity: 27 CDB/19 CWB indoor suction air temp., 35 CDB outdoor suction air temp. Heating capacity: 20 CDB indoor suction air temp., 7 CDB/6 CWB outdoor suction air temp. Low-temp. heating capacity: 20 CDB indoor suction air temp., 2 CDB/1 CWB outdoor suction air temp. (2) The sound pressure level is the value measured at a height of 1.5 m, 1 m from the front of the unit and calculated with zero echo considered. When the unit is actually installed, the sound pressure level will be affected by ambient noise and echoes and will normally be more than the values specified above. (3) The values above are for a single indoor unit. (4) Capacity characteristics vary according to the combination of indoor and outdoor units. (5) Specifications are subject to change without notice due to product improvements. Air outlet Top-side cable connection hole 27 70 148 Top-side piping connection hole A B 38 (Dimension of suspension bracket) Installation port of wireless remote controller signal receiving kit J 110 Air outlet 92 280 110 670 Twist pair cable (0.75 mm 2 or more) (must be obtained locally) Remote controller ø12 (Suspension bolt installation position) 50 or less (Length of suspension bolt) E D 70 C 70 Refrigerant liquid pipe G Refrigerant gas pipe F 305 Right-side piping connection hole (Knockout hole) 118 160 Model Size A B C D E F G H I J K Refrigerant gas pipe H connection position 156 Drain pipe connection position (VP20) ( F copper tube with flare nut) (for left-side draining) I Refrigerant liquid pipe connection position ( G copper tube with flare nut) 106 135 40 12 52 104 130 Rear-side piping connection cover Left-side piping connection hole (Knockout hole) 74 175 K 67 1,000 1,100 960 216 210 12.7 6.4 215 200 370 370 1,220 1,320 1,180 216 210 15.9 9.5 205 195 370 370 1,220 1,320 1,180 276 270 0.22 0.22 1.02 1.02 90 90 0.135 33 28 23 45 42 39 9.5 15.9 Dimensions correspondence chart P56 P71 • 80 P112 P140 Rear-side cable connection hole 103 * 40 or more Space required for tightening of the suspension bolt. 40 Drain pipe connection position (VP20) (for right-side draining) 500 or more * 300 or more Space required for servicing of the autolouver motor, etc. (Single unit installation) 8 or more 400 or more 15.9 15.9 9.5 210 195 280 280 * 40 or more * 300 or more * 300 or more (Parallel installation of two units) Note: When there is cornicing attached to the ceiling, use the dimensions from the cornicing’s front or lower surface. Service space 1,480 1,580 1,440 276 270 9.5 210 195 280 280
Wall Type PAAP-FSNM2 Industry-Leading <strong>Compact</strong>ness and Flat Panel at The Front Stylish Design and Maintenance Flat panel is now used in the front part of all models. This flat panel also contributes to an easy maintenance. P56 and P71 have been included as part of the new flat panel line-up. Top-class <strong>Compact</strong> and Light Weight Design More Choice in selecting the installation location thanks to the reduction in width of the P71. Conventional Model New Model 25% decreased 1,390mm 1,150mm Remote Control Switch PLPAR Wireless Remote Controller PC-LH3A Remote control switch and wireless remote controller are both options. User Friendly Easy switching from wireless to wired remote controller by Dip Switch built-in the receiver part. Direct connection with terminal board is available in P56 and P71 when being connected to wired remote controller. All alarm code is displayed when using wireless remote controller by combining the flashing times of “Timer,” “Filter/Defrosting” (All models).
Page 1 and 2: Creating Air-Conditioned Comfort GH
Page 3 and 4: Eco Compact H1 Series Environmental
Page 5 and 6: Outdoor Unit Lineup ANZP450H1 45 kW
Page 7 and 8: 4-Way Cassette Type PCAP-FSN2 Extre
Page 9 and 10: In-the-Ceiling Type PDAP-FSN2 Remot
Page 11: 15 Ceiling Type PHAP-FSN2 Quiet Ope
Page 15 and 16: Control System Wide Range of Option
Page 17: [ Heating and Cooling Operation ] 1

Eco Compact H1 Series - Ferret

Create successful ePaper yourself

Delete template?

Save as template?