Geberit, 2009-2010.pdf

Range of colours 

Gloss colour 

Glass 

11 

white alpine bahama beige manhattan 

pergamon 

EP 

SC 

10 CG 

SE 

white glass satinised “grains” green glass satinised 

smoked glass reflective 

Metallic finished 

00 

agais 

FB 

star white 

stainless steel customised* 

bright chrome-plated 

matt chrome-plated 

bright chrome / matt chrome 

white / gold-plated / white 

46 

DT 

special brass (colour) satinox 

KA KB 

KK 

*The inlay is not supplied by Geberit 

00 

FR 

SD 

21 

GM 

KH 

Matt colour 

edelwhite 

RAL colour 

jet black RAL 9005 

gold-plated 

palladium-plated matt 

bright chrome / bright chr struct bright chr / matt chr / bright chr white / bright chrome / white 

KL 

white / matt chrome / matt chr black / bright chrome / black 

KM 

DK 

DW 

45 

HC 

KJ 

KN 

matt chr / bright chr / matt chr

Geberit 

Installation Systems 

Concealed cisterns 

Page 3 

Kombifix • Mounting elements Page 9 

Duofix • Self-supporting mounting frame Page 19 

GIS • Installation system Page 33 

Cistern for furniture 

Page 45 

Geberit Actuator Plates • Flush actuators for WC Page 47 

Geberit AquaClean 

Geberit Exposed Cisterns 

Geberit Taps & Flush Systems 

Geberit Traps 

Appendix 

• Exposed cistern and flush pipes 

• Filling valves and flush mechanisms 

• Flush controls 

• Flush actuators 

• Taps 

• Traps for sanitary appliances 

• Shower channels 

Page 57 

Page 65 

Page 79 

Page 115 

• International sales and delivery conditions Page 149 

• Index Page 153

Abbreviation 

Abbreviation Dimension Designation 

D cm Outside diameter 

diØ mm Inside diameter 

dØ mm Outside diameter 

E cm Insertion depth 

G " Pipe threads where pressure-tight joints are not made on the threads (ISO 228/1) 

H cm Height 

H1 cm Part height 

K cm Max. shorting 

k cm Flange, diameter of bolt circle 

L cm Length 

l cm Length part dimension 

L(m) m Pipe length 

m cm Diameter of bolt holes 

M mm Metric threads (ISO 261) 

R " Outside thread, tapered, threads where pressure-tight joints are made on the thread 

Rp " Screw thread joint 

s mm Wall thickness 

Z cm Z-Dimension 

Plug Designation 

IEC-83/C6 EU, 230 V 

EN 50075 SS I EU, 230 V 

CEE 17 yellow EU, 230 V 

IEC 60884-1 SS XVII-CEE7 EU, 230 V 

BS 1363A GB, 230 V 

Nema 1-15P USA, 125 V 

2 Sanitary Systems Catalogue 2009/2010


Front 

actuation 

Front or top 

actuation 

12 cm thick 

8cm thick 

Factory setting Description 

6/3liter • for Geberit design actuator plates Page 4 

9/3liter • for Geberit standard actuator plates Page 7 

6 / 3 liter 

9/3liter 

9 / 3 liter 

• for Geberit design actuator plates, 

with netting for direct plastering 

• for Geberit standard actuator plates, 

with netting for direct plastering 

Page 5 

Page 7 

15 cm thick 6/3liter • for actuator plates Kappa20, Kappa50 Page 6 

Accessories • Flush pipe connectors Page 8 

Sanitary Systems Catalogue 2009/2010 3





UP320 concealed cistern, front actuation, thickness 

12cm 

100 

84 5 

36 5 

23 

Application Purpose 

• For concealed installation 

0 

41 

R1 44 

/2 

Characteristics 

• Dual flush with Sigma50, Sigma20, Samba or Bolero actuator plate 

• Single flush with Sigma10 actuator plate 

• Flush-stop with Rumba, Mambo or Tango actuator plate 

• Adjustable flushing volume 

• Concealed cistern for tool-free mounting and repair work 

• Concealed cistern fully insulated against condensation 

• Water supply connection at centre back or at the top 

Product Details 

Factory setting 6 and 3 l 

Flush range small 3 - 4 l 

Flush range large 6 / 7.5 l 

Interruptible flush-stop 6 / 7.5 l 

30 

Scope Of Delivery 

• Water supply connection R 1/2" with integrated angle stop valve 

• Protection cover for service opening, can be cut to length 

• Flush bend with protection cover, fitted 

• Protection plug for flush pipe 

• 2 slotted flat irons 

• 2 fastening brackets, pre-mounted 

• Fastening material 

• Excluded: Actuator plate 

13 5 

Ordering Information 

Article no. Description 

109.300.00.5 


12 cm 

23 5 

51 

104 5 

108 

12 2-9 

4 Sanitary Systems Catalogue 2009/2010 

100 

41 

0

UP700 Concealed cistern, front actuation, thickness 

8 cm 




• Installation depth 8 cm 

• Fully insulated against condensation 




• Flush-stop with actuator plate Rumba, Mambo or Tango 

• Water supply connection at the top 


110 

0 

64 5-82 


Flush volume small 3 l 

Flush range large 6 / 9 l 

Interruptible flush-stop 6 / 9 l 


• Water supply connection R 1/2" with DZR angle stop valve 



• Netting for direct plastering 


• Flush pipe dia. 45 mm 

• Sleeve for flush pipe 


50 5 

R1/2 

X 8 

max.-15 



109.765.00.1 


8 cm 

59 5 

8 7 

8 7 

8 

2-5 

110 

87 X 

0 



UP700 Concealed cistern, front actuation, thickness 

8 cm 












110 












• Sleeve for flush pipe 




109.766.00.1 


8 cm 

Sanitary Systems Catalogue 2009/2010 5 

0 

50 5 

R1/2 

X 8 

59 5 

max.-15 

8 7 

64 5-82 

8 7 

8 

2-5 

110 

87 X 

0



UP200 Concealed cistern, front or top actuation, 

height 82 cm 




• Actuation from front or from top 

• Installation depth adjustable 


• Water supply connection left 

• Dual flush with actuator plate Kappa20 or Kappa50 

• Cistern height 82 cm 


X 

0 




57 

46 5 




• Protection plug for flush bend 


• 2 sleeves for flush pipe 






109.201.00.1 

UP200 concealed cistern, front or top actuation, 

height 82 cm 

13 

9 

335 465 18 

min.3 


2 5 

max.9 

max.9 

0 

UP200 Concealed cistern, front or top actuation, 

height 98 cm 




• Actuation from front or from top 

• Installation depth adjustable 




• Cistern height 98 cm 


X 

0 




57 

46 5 




• Protection plug for flush bend 

• WC connection set, dia. 90 mm 

• WC outlet bend, HDPE, dia. 90/110 mm 






109.210.00.1 

UP200 concealed cistern, front or top actuation, 

height 98 cm 

13 

46 5 

9 

59 

18 

min.3 

2 5 

max.9 

max.9 

0


12 cm new 





• Immediate post flush possible with factory setting 



• Flush bend fitted 

• Dual flush with Delta50 or Delta21 actuator plate 

• Flush-stop or single flush with Delta40 or Delta11 actuator plate 


101 5 -119 

86-103 5 

36 5 

0 

44 

41 

R1 /2 

8 5 


Flush range small 3 / 4 l 




• Insulation against condensation for cistern/flush pipe 




• Protection cover for service opening, polystyrene foam 







109.160.00.1 


12 cm, incl. flush pipe 

25 

53 5 

111-1285 -175 -17 

105 

5 

12 1-6 

1015-119 13 4 

41 

0 




8 cm new 








• Flush bend fitted 




98 5 -115 5 
















109.130.00.1 


8 cm, incl. flush pipe 


36 5 

0 

45 

R 1 /2 

8 5 

59 5 

-17 

-17 

8 1-6 

13 4 

98 5 -115 5 

41 

0


Accessories 

Accessories 

Accessories 

Flush pipe connector dia. 45 mm, rosette oval 

• Application Purpose 

• To connect flush bends (concealed) with a WC 


• Push-on seal 

• Sleeve 

• Rosette, oval 


Article no. dØ 

d1Ø 

diØ 

Colour 

[mm] 

[mm] 

[mm] 

118.221.11.1 45 40 44 white alpine 

118.221.21.1 45 40 44 bright chrome-plated 

Flush pipe connector dia. 45 mm, rosette round 





d d1 



d1Ø 

diØ 

Colour 

[mm] 

[mm] 

[mm] 

118.026.11.1 45 40 44 white alpine 



8 

d d1 

8 

12 

8 5 

d1 

3 5 

d1 

3 5 

25 

25 

di 

di

Kombifix 

Mounting elements 

Element for WC 

with cistern 

Element for bidet 

Element height Description 

82, 98 cm 

108 cm 

109 cm 

110 cm 

• front or top actuation, for actuator plates 

Kappa20, Kappa50 

• front actuation, for Geberit design actuator 

plates 


plates, with short support legs 

• front actuation, for Geberit standard 

actuator plates 


actuator plates, with short support legs 


actuator plates, with netting for direct plastering 


plates, with netting for direct plastering 

Page 12 

Page 10 

Page 10 

Page 13 

Page 13 

Page 13 

Page 11 

• installation depth adjustable 12 - 16 cm Page 16 

• without adjustable installation depth Page 16 

Element for washbasin • installation depth adjustable 8 - 19 cm Page 16 

Element for urinal 

Accessories 

• for type Universal Page 14 

• for type Universal, hidden Page 15 

• with exposed flush valve Page 15 

• support legs long Page 17 

• support legs short Page 17 

• sound insulation Page 17 

• installation set for electrical connection Page 17 


Kombifix 

Mounting elements for wall-hung WC 


Kombifix mounting elements for wall-hung WC 

Kombifix element with UP320, front actuation 

100 

23 

0 

42 

R½ 

18/23 

19 5 30 

1045 76 108 


• For wall-hung WC with fastening distance 18 cm or 23 cm 

• For installation in front of or inside a solid wall 

• Not suitable for installation in a drywall 


• Installation height 108cm 

• Installation depth 12cm 






• Sound-absorbing actuator rods, tool-free, fast adjustment 



• Fastening for outlet bend can be mounted from front 

• Supporting frame surface blue 








• Geberit AquaClean conduit pipe 

• Flush bend 

• Protection plug 


• WC outlet bend, HDPE, dia. 110 mm 


• 2 threaded rods M12 for ceramics fastening 





110.350.00.5 Kombifix element with UP320, front actuation 


12 9 

5 5 

100 

41 

0 

Kombifix element with UP320, front actuation, with 

short support legs 






• Installation height 108cm 

• Installation depth 12cm 








• Fastening for outlet bend can be mounted from front 



100 

23 

0 

42 

R½ 

18/23 

19 5 30 

1045 76 108 





12 9 










• 2 short support legs 





110.340.00.5 Kombifix element with UP320, with short support legs 

5 5 

100 

41 

0







• Installation height 110 cm 








• Push-in fastening for outlet bend 

• Supporting frame galvanized 


101 

23 

0 

50 

R1/2 

5 

18/23 







• Mounting frame with 4 fastening brackets, galvanized 



• WC outlet bend dia. 90 mm 

• Adapter sleeve, dia. 90/110 mm 








78 

110 

8 7 2-5 

8 

9 

101 

41 

0 

Kombifix 


Kombifix element with UP700, front actuation new 

















101 

23 

0 






• Mounting frame with 4 fastening brackets, galvanized 




• WC outlet bend dia. 90 mm 










50 

R1/2 

5 

18/23 

78 

110 

8 7 2-5 

8 

9 

101 

41 

0

Kombifix 


Kombifix element with UP200, front or top actuation, 

height 82 cm 












• Adjustable installation depth, 16.5 - 23.5 cm 



R1/2 755 22 

0 




42 

18/23 

19 5 30 









• 2 fastening brackets 





110.251.00.1 


height 82 cm 

51 

82 

min. 16 5 


6 

6 6 

91 

75 

40 

0 


height 98 cm 







• Adjustable installation depth, 16.5 - 23.5 cm 








915 R1/2 23 

0 

42 

18/23 

19 5 30 

















110.259.00.1 


height 98 cm 

66 

98 

min. 16 5 

6 

6 6 

107 

91 

41 

0







• Installation height 109.5 cm 










100 

23 

0 

42 

R½ 

18/23 

103 5 

109 5 






• Mounting frame with 4 fastening brackets 



• Angle stop valve R 1/2" and plug adapter 

• Outlet bend bracket 

• Connector set ø 90 mm 

• WC outlet bend, PE-HD, ø 90/90 mm 


• Two protection plugs 






76 

12 1-6 

6 5 

new 

100 

41 

0 

Kombifix 


Kombifix element with UP182, with short support 

legs new 






• Installation height 109.5 cm 










100 

23 

0 







• 2 support legs, galvanized 













110.170.00.1 Kombifix element with UP182, with short support legs 


42 

R½ 

18/23 

76 

103 5 

109 5 

12 1-6 

6 5 

100 

41 

0

Kombifix 

Mounting elements for urinal 

Kombifix element with UP172, front actuation new 















100 

23 

0 

R½ 455 

18/23 

77 

109 


















8 1-6 






6 5 

100 

41 

0 

Kombifix mounting elements for urinal 

Kombifix element for urinal Universal new 


• For installing urinals 


• For accommodating the HyTronic urinal controls IR or HyTouch urinal 

controls pneumatic with plate size 13 x 13 cm 



• Installation depth adjustable, 8 - 12,5 cm 

• Water supply connection 1/2" 

• Water supply connection can be installed without tools 

• Stop valve with throttle pre-mounted 

• Pre-mounted conduit pipe for rinsing the pipe 


• Flexible flush connection to inlet 

• Fastening for ceramic appliances, adjustable height and distance 

• Fastening for outlet bend sound absorbing and height-adjustable 

• Fastening for flush pipe dia. 32 mm, height-adjustable 

• Additional fastening possible for urinal with accessories 

• Conversion possible for urinals with spray head with accessories 


9-29 

min. 9 

0 

Flow rate at 1 bar 0.3 l/s 

Test pressure water 16 bar 

Pressure range during operation 1 - 8 bar 


• Concealed housing with water section 

• Protection box with cover 

• Water supply connection R 1/2" 

• Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal 

• Suction trap ø 50 mm, incl. seal on urinal 

• Outlet bend reduced ø 63/57 mm to ø 50/44 mm, incl. seal on 

suction trap 

• 2 threaded rods M8 for urinal fastening 



• Excluded: Urinal flushing system 



457.611.00.1 Kombifix element for urinal Universal 

42 

7 5 -33 

R1 /2 

17-37 

100 

max. 65 109-127 

9 

8-12 5 

100-118 

7 5 

0

Kombifix element for urinal, with exposed flush valve 

0 

100 

109-127 




• For exposed flush valve 



• Installation height 109 cm, adjustable up to 127 cm 




• Fastening for flush pipe Rp 1/2" height and sides adjustable 



• Connection set for urinal with trap 

• Rubber collar dia. 44/32 mm 

• Outlet bend dia. 50/63 mm 



• 4 fastening brackets, adjustable 



42 

7 5 -33 

R 1 /2 

8-12 

min. 112-130 

5 



457.686.00.1 Kombifix element for urinal, with exposed flush valve 

7 5 

0 

Kombifix 


Kombifix element for urinal Universal, hidden new 

max. 81 

min. 31 

0 

0-20 

100 

109-127 








• Water connection height-adjustable 




















• Outlet bend PE-HD reducedø 63/57 mm to ø 50/44 mm 







457.689.00.1 Kombifix element for urinal Universal, UR hidden 


42 

7 5 -33 

R 1 /2 

7 5 

8-125 9 

0 

0-20

Kombifix 

Mounting elements for bidet and washbasin 

Mounting elements for bidet and washbasin 

Kombifix mounting elements for bidet and 

washbasin 

Kombifix element for wall-hung bidet 

350 330 310 290 270 250 230 210 190 170 150 130 110 90 

360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 

964.162.00.0 

964.161.00.0 

80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 

350 330 310 290 270 250 230 210 190 170 150 130 110 90 

360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 

964.162.00.0 

80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 

964.161.00.0 



• For bidet with fastening distance 18 cm or 23 cm 



• Installation depth adjustable, 12 - 16 cm 



• Bidet outlet bend, HDPE, dia. 50 mm, lengthened 





• Excluded: Water supply connections 



457.893.00.1 Kombifix element for wall-hung bidet 

Kombifix element for wall-hung bidet, without 

adjustable installation depth 

X 

0 

X 

0 

18/23 



• For bidet with fastening distance 18 cm or 23 cm 



• Fastening for outlet bend sound-absorbing 

42 

18/23 

13 6 

8 

9 3 

15 

32 

55 2 

8-37 


• Bidet outlet bend, HDPE, dia. 50 mm, lengthened 



• Mounting frame with 4 fastening brackets, galvanized, depth 8 cm 





Kombifix element for wall-hung bidet, without 

457.608.00.1 

adjustable installation depth 

4 

4 

36 1 

315 4 

Kombifix element for washbasin 


12 

46 8 

23 5 

3 4 

0 



• For washbasin with a fastening distance of 17 - 28 cm 




• Installation depth adjustable, 8 - 19 cm 


• Outlet bend, HDPE, dia. 50 mm 








C 

A 

0 

35 

17-28 

15 3 

7 6 

5 5 

5 5 

33 5 

457.410.00.1 Kombifix element for washbasin 

7 

8-19 

85 –1

Accessories 

Kombifix Accessories 

Pair of support legs long 


• For free-standing installation of Kombifix installation elements 


• Not suitable for Kombifix urinal installation element 


• Square steel pipe, galvanized 





457.872.26.1 Pair of support legs long 

Pair of support legs short 


• For free-standing installation of Kombifix installation elements 

• For Kombifix installation elements wall-hung WC, Geberit AquaClean 

and bidet 



•Galvanized 





457.888.26.1 Pair of support legs short 

15 

4 

86 

49 

2 5 

7 

15 

Sound insulation set 


• For wall-hung WC and wall-hung bidet 


Product material Polystyrene foam 



Installation set for electrical connection 

Kombifix 

Accessories 

156.050.00.1 Sound insulation set for wall-hung WC and bidet 


• For positioning the electrical connection to the installation elements for 

a wall-hung WC 


• Adjustable depth 


• Flush-mounted feeder box 




242.001.00.1 Installation set for electrical connection 


6 5 

40 

6 5 

6 

42 

5 5 3 5


Duofix 

Self-supporting mounting frame 

Element for WC 

Element for bidet 

with cistern 

Element for washbasin 


Accessories 

Element height Description 

82, 98 cm 

112 cm 



Page 21 

• front actuation, for Geberit design actuator plates Page 20 

• front actuation, for corner installation, for Geberit 

design actuator plates 



• front actuation, telescopic, for Geberit design 


• front actuation, thickness 8 cm, for Geberit 

design actuator plates 

Page 22 

Page 23 

Page 22 

Page 20 

without cistern 112 cm • Duofix mounting element Page 23 

82, 98 cm Page 24 

112 cm Page 25 

98/82 cm Page 26 

112 cm Page 27 

112 cm • for concealed wall-mounted tap Page 25 

112 cm • for type Keramag, Joly and Visit Page 28 

112 - 130 cm 



• for exposed flush valve Page 28 

• fastening sets Page 29 

• support for small ceramics Page 31 

• installation set for electrical connection Page 31 

• sound insulation Page 31 

• rubber collar Page 31 

• tap connection Page 31 


Duofix 



Duofix mounting elements for wall-hung WC 

Duofix element with UP320, front actuation 

100 

23 

0 

0-20 

7 3 

50 

R½ 

18/23 

19 5 30 


• For installation in front of a solid or drywall 

• For installation in drywall or preWall construction covered with panels 

(gypsum or wood) 

• For installation in room-height preWall or partition wall 

• For a floor construction of 0 - 20 cm 




• Element height 112 cm 







• Tool-free fastening for outlet bend, sound-absorbing, adjustable in 

depth with 8 positions, adjustable range 45 mm 

• Self-locking feet for tool-free alignment of the element 

• Galvanized leg supports, adjustable from 0 - 20 cm, with detent mark 


•Self-supporting 

• Powder-coated, colour Geberit blue 

• Rotating foot plate 







• Water supply connection R 1/2" with integrated angle stop valve and 

hand wheel 













111.300.00.5 Duofix element with UP320, front actuation 

104 5 

112 

12 6 

max. 62 


4 8 

9-13 5 

100 

0 

41 

Duofix Special element with UP700, front actuation, 

thickness 8cm new 


4 








5 




• M12 fastening for ceramic appliances, fastening distance 18 cm or 

23 cm 








• Fastening for outlet bend adjustable in depth and sound-absorbing 


• Feet galvanized, adjustable 0-12 cm 



100 

23 

0 

0-12 





16 

R1 59 

/2 

18/23 








• WC outlet bend, PE-HD, ø 90 mm, extended 






111.769.00.1 

Duofix special element with UP700, front actuation, 

thickness 8cm 

112 

9 

min. 2 

6 

100 

max. 62 

41 

0 

0-12

Duofix element with UP200, front or top actuation, 

height 82 cm 















• Connection hose to angle stop valve can be screw-connected by 

hand 

• Holes dia. 9 mm for fastening in wood frame construction 









R1 /2 

755 22 

0 

0-20 




7 3 

50 

18/23 

19 5 30 














111.240.00.1 


height 82 cm 

32 

82 

min. 17 

6 6 

max. 62 

4 8 

9-13 5 

max. 91 

75 

40 

0 

Duofix 



height 98 cm 
















hand 










R 1 /2 

91 5 

23 

















111.290.00.1 


height 98 cm 


0 

0-20 

7 3 

19 5 

50 

18/23 

30 

33 

98 

min. 17 

6 6 

max. 62 

4 8 

9-13 5 

max. 107 

91 

41 

0

Duofix 

Mounting elements for corner installation 

Duofix Special element with UP320, front operated, 

width-adjustable 

9-13 


• For side fastening on room-height solid wall 

• For building a part-height preWall construction in front of solid or 

drywall 

• Suitable for mounting without rear wall fastening 

• Suitable for installation in UW profile 50 and UW profile 75 


• For installation in niches 

• For lateral fastening to room-height dry wall 

5 


• Integrated panelling support 

• Variable element width, 80 - 130 cm 

• Adjustable side profiles 

• Four-point fastening to the building structure 
















100 

23 

0 

0-20 

7 3 

80 

R1 /2 

1045 112 





130 

18/23 



hand wheel 









• Rear wall fastening 

• Panelling sheet for part-height shelf 





111.385.00.5 


width-adjustable 

Mounting elements for corner installation 


R 1 /2 

12 

4 8 

6 

100 

max. 62 

0 

41 

Duofix mounting elements for corner installation 


corner installation 


11 

• For free-standing installation with wall end profile 

• For installation as a corner element in front of drywall, solid wall or GIS 

wall construction 










• Telescopic profiles to fasten to the wall and for fastening panelling 

supports 

• Wall fixture variable from 30° to 60° 

• Leg supports not on the perimeter to allow for lateral offset of the 

drainage pipe 

• Variable element depth 






100 

23 

0 

0-20 

9 

53-76 

R½ 

18/23 

1045 112 







hand wheel 




• Installation kit for electrical connection 



• WC outlet pipe, HDPE, dia. 90 mm 







111.390.00.5 


corner installation 

12 8 

6 

4 8 

100 

max. 62 

0 

41

Duofix element with UP182, front actuation new 


• For front actuation 

• For installation in part-height or room-height drywall construction in 

front of a solid or drywall construction 













• Foot plate plastic, depth suitable for mounting in UW50 profiles 




100 

23 

0 

0-20 

50 

R1 /2 

18/23 

1045 112 






• Galvanised leg supports, adjustable, premounted 











7 3 



458.160.00.1 Duofix element with UP182, front actuation 

12 

1-6 

100 

max. 

62 

0 

0-20 

41 

48 9/11 (d 90) 

10/12 (d 110) 


Duofix 


Duofix mounting elements for wall-hung WC, 

without concealed cistern 

Duofix element without cistern, height 112 cm 

















• Excluded: Concealed cistern 




111.321.00.1 Duofix element without cistern, height 112 cm 


100 

23 

0 

0-20 

7 3 

50 

18/23 

112 

4 

max. 62 

41 

4 8 

9-13 5 

0

Duofix 

Mounting elements for bidet 

Mounting elements for bidet 

Duofix mounting elements for bidet 

Duofix element for bidet, height 82 cm 

0 

0-20 







• Bidet fastening distance 18 cm or 23 cm 









• Outlet bend dia. 50 mm 




7 3 



111.524.00.1 Duofix element for bidet, height 82 cm 

50 

8-38 

18/23 

82 


4 

4 8 

10 

0 

0-20 























0 

0-20 

7 3 


50 

8-38 

18/23 

98 

4 

4 8 

10 

0 

0-20


350 330 310 290 270 250 230 210 190 170 150 130 110 90 

360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 

100 

0 

0-20 























50 

8-38 

18/23 

7 3 

112 

4 

4 8 

10 

0 

0-20 

Mounting elements for washbasin 

Duofix 


Duofix mounting elements for washbasin 

Duofix washbasin for concealed wall-mounted tap 









• Element height 112 cm to 130 cm 


• Washbasin fastening distance 5 - 38 cm 





• Fastening for outlet bend, adjustable height 

• Fastening plate for concealed fittings, veneered wood, waterproof 

bonded, adjustable in height and depth 









0 

0-20 

111.493.00.1 Duofix washbasin for concealed wall-mounted tap 

Note 

• For concealed base unit, article no. 616.030.00.1, page 112. 

• For concealed wall mounted tap HyTronic87 and HyTronic88. 


50 

5-38 

80 

52 

7 3 

112-130 

11 

4 8 

85 

0

Duofix 


Duofix crossbar for concealed stop valves 



• For installation in Duofix installation element 

• For GIS concealed shut-off valve 


•Galvanized 





111.807.00.1 Duofix crossbar for concealed stop valves 

15 3 

42 


6 6 

7 4 

8 

Duofix element for washbasin, height 98/82 cm 

0 

0-20 

7 98 

80 

(82) 






• For washbasin with upright tap unit 


• Element height 98/82 cm 





• For structures on the floor, leg supports withdrawable to -5 cm 


• Tap connection plate with adjustable height and depth 









50 

5-38 

15 3 

30 6 



111.490.00.1 Duofix element for washbasin, height 98/82 cm 

7 6 

52 

7 3 

7 5 

4 8 

85 

0

Duofix element for washbasin, height 112 cm 

100 

0 

0-20 

112 

7 

80 

52 






















50 

5-38 

15 3 

30 6 



111.434.00.1 Duofix element for washbasin, height 112 cm 

7 6 

7 3 

7 5 

4 8 

85 

0 


Duofix mounting elements for urinal 

Duofix 


Duofix element for urinal Universal new 











• Element height 112 cm, adjustable up to 130 cm 




















12-32 

min. 9 

0 

0-20 

R 

17-37 

1 /2 

max. 65 

112-130 











suction trap 






111.616.00.1 Duofix element for urinal Universal 


50 

7 5 -33 

7 3 

7 5 9 

100-118 

4 8 

0 

0-20

Duofix 


Duofix element for urinal for exposed flush valve, 

type Universal 

0 

0-20 

50 

7 5 -33 









• For exposed flush valve 











• Fastening for flush pipe Rp 1/2" height and sides adjustable 




• Connection set for urinal with trap 



suction trap 





R 1 /2 

112-130 



111.686.00.1 

Duofix element for urinal for exposed flush valve, type 

Universal 

7 3 


7 5 

4 8 

65 

0 

Duofix element for urinal type Keramag Joly 

and Visit new 

110 








• For semi-recessed urinals Keramag Joly and Keramag Visit 


















0 

0-20 

36 5 

122-130 

61 5 

7 3 










suction trap 


• 2 cut-out templates 



• Excluded: Connection hose between installation set and urinal 



111.618.00.1 Duofix element for urinal type Keramag Joly and Visit 

Connection hose between installation set and urinal available at 

Keramag, modell no. 521225 

100 

0 

0-20 

36 5 

28 5 14 2 

61 5 

7 3 

112-130 

9 

min.16 5 

4 8 

7 5 

65 

0

Duofix element for urinal Universal hidden new 


• For accommodating the hidden urinal control 










• Water connection height-adjustable 



















max. 81 

min. 31 

0 

0-20 











111.689.00.1 Duofix element for urinal Universal, hidden 

50 

7 5 -33 

R 1 /2 




7 3 

112-130 

7 5 9 

4 8 

0 

0-20 

Accessories 

Duofix accessories 

Duofix wall fastening set 

Duofix 

Accessories 


• For fastening Duofix installation elements in front of solid or drywall 

construction 


• Adjustable depth, 13 - 20 cm 


Product material Zinc diecasting 


• 2 Wall anchorings 

• 2 M10 threaded rods with long nut 

• 2 Panelling supports, push-in 




111.815.00.1 Duofix wall fastening set 

Duofix Special wall fastening set for WC element with 

UP700 



242.048.00.1 

Duofix special fastening set for WC element with 

UP700 

Duofix wall fastening set for UP182 new 


• For fastening Duofix WC element with UP182 on a solid or drywall 

construction 


•Galvanized 



13-20 



111.839.00.1 Duofix wall fastening set for UP182 


8 5 

3 8 

9 - 11 5 2 

12-20 4 

4 

2 8 

2 

4

Duofix 

Accessories 

Duofix preWall set for UP182 new 


• For fastening Duofix WC element with UP182 on a solid or drywall 

construction 




• Crossbar for panelling support 



111.813.00.1 Duofix wall fastening set + crossbar for UP182 

Duofix wall fastening set for corner installation 


• For universal fastening of Duofix installation elements to a solid or 

drywall construction 


• Variable angle adaptation for corner installation 


•Galvanized 



• 2 M10 threaded rods with long nut 


• Excluded: Panelling supports, push-in 



111.835.00.1 Duofix wall fastening set for corner installation 

Duofix feet fixation to back wall 


• For alternative fastening of Duofix element feet to the rear wall 


•Galvanized 



Product material Steel 





14-20 6 

13 - 20 

111.867.00.1 Duofix feet fixation to the back wall 

Duofix extension angle brackets 



• For fastening Duofix elements between two studs with a distance of 

50 - 65 cm 


•Galvanized 







111.869.00.1 Duofix fixation between studs 50-65cm 

Duofix support brackets for large washbasin 


• For fastening washbasins with a fastening distance larger than 38 cm 

to Duofix element for washbasin 


• Fastening distance adjustable 38-58 cm 

•Galvanized 







111.868.00.1 Duofix support brackets for large washbasin

Duofix support brackets for small ceramics WC 


• For additional support of WC ceramic appliances with contact 

surfaces smaller than 17 cm 

X 

• For WC elements GIS and Duofix 


• U-profiles, galvanized 





111.847.00.1 Support brackets for small ceramics WC 





• For use with Kombifix, Duofix and GIS installation elements 







6 5 



6 5 

6 

5 5 3 5 






Rubber collar for traps 


Tap connection, with male thread, brass 



Duofix 

Accessories 




Article no. Description dØ 

[mm] 

diØ 

[mm] 

152.682.00.1 Rubber collar for traps, dia. 50mm 32 44 






Product material Brass 

Angle 90° 


[mm] 


di 

H Z 

R 

[''] 

40 

l 

R/ 

Rp 

[''] 

L 

H 

[cm] 

L 

[cm] 

l 

[cm] 

l1 

[cm] 

Z 

[cm] 

611.297.00.1 15 1/2 1/2 3 5,2 2 2,4 1,8 

l1 

d 

Rp 

42

Duofix 

Accessories 


GIS 

Installation system 

System component 

Element for 

WC 

with cistern 

Construction height Description 

86 cm 

114 cm 

• Square profile Page 34 

• Profile connector piece Page 34 

• L-bracket Page 34 

• Distance piece Page 34 

• Slotted flat iron Page 34 




plates 

Page 35 

Page 35 

without cistern 95 cm • for Geberit AquaClean Page 36 

Element for urinal 114 - 132 cm 



Element for bidet Page 37 

Element for washbasin Page 38 

Accessories 

• Fixture plate Page 38 

• Mounting plate Page 39 

• Panel Page 39 

• Installation set for electrical connection Page 43 

• Attaching parts for elements Page 40 

• Access opening Page 42 

• Pipe clip Page 43 

• Support brackets for small ceramics Page 43 

• Sound insulation Page 44 


GIS 



GIS system component 

GIS square profile 


• To draw up GIS support systems 


•Galvanized 





461.000.25.1 

GIS square profile, galvanized, 32 x 32mm, length 5 

m 

GIS profile connector piece 

Application Purpose 1 


• For connecting GIS profiles without tools 


• Maximum insertion depth indicated 

• Clip, spring steel, protection against corrosion 

• Die-cast lever for manual actuation 



461.200.00.1 GIS profile connector piece 

2 

GIS distance piece 



• To make GIS support systems more rigid 


• 2 die-cast components with 0.5 cm grid, can be turned by 90° 

towards each other 

• Insertion direction indicated 

• Clip, spring steel 





5 m 

461.003.00.1 GIS distance piece, galvanized 

6 

5 5 

9-14 

2 

GIS L-bracket 


3 2 

3 2 

3 2 

3 2 

3 



• For fastening the GIS support system to the building structure 


•Galvanized 




• Ratchet pin 

•NutM8 




461.002.00.1 GIS-L-bracket, galvanized 

GIS slotted flat iron 



• To connect the GIS profiles in the vicinity of the horizontal panel joints 


•Galvanized 



461.022.00.1 GIS slotted flat iron, galvanized 

5 

7 5 

3 0 4 

13 

5 5 

0 5

Element for wall-hung WC with concealed cistern 

GIS element for wall-hung WC with concealed 

cistern 

GIS element with UP320, front actuation 

100 

23 

0 

0 - 20 



• For installation in GIS support system 








• Construction height 114 cm 









hand wheel 













461.311.00.5 GIS element with UP320, front actuation 

42 4 

R 1 /2 

18/23 

19 5 30 

100 

104 5 

≥ 16 

114 

5 (DN 90) 

≥ 195 (DN 100) 

100 

41 

0 

0 - 20 

9 - 13 5 

GIS 

Element for wall-hung WC with concealed cistern 

GIS element with UP200, front or top actuation 


• For assembly in partial-height or room-height GIS preWall 




• Concealed cistern UP200 with front/top actuation 





hand 

• Fast adjustment of the actuator rods for actuator plate 







R 1 /2 

75 5 

22 






• Protection and marking plugs 










461.240.00.1 GIS element with UP200, front or top actuation 


0 

0 - 20 

42 4 

18/23 

19 5 30 

32 

73 5 

min. 21 

6 6 

max. 91 max. 86 

40 

9 - 13 5 

75 

0 

0 - 20

GIS 

Element for wall-hung WC without concealed cistern / for urinal 

Element for wall-hung WC without concealed cistern / for urinal 

GIS element for wall-hung WC without 

concealed cistern 

GIS element for wall-hung WC 

75 5 -86 


• For connecting Geberit AquaClean complete solution with wallmounted 

cistern 



• For use with the wall-hung WC with close-coupled exposed cistern 






42 4 

18/23 

80 2 


• MeplaFix water supply connection R 1/2" 

• MeplaFix adapter, ø 20 mm, pre-mounted 




23 



461.206.00.1 GIS element for wall-hung WC 

0 

0-20 

min.165 (DN 90) 

min.185 (DN 100) 


9-13 5 

min.95 

41 

0 

0-20 


GIS element for urinal 

GIS element for urinal Universal new 



• For installation in part-height or room-height GIS division 

• For installation in part-height or room-height GIS partition wall 



















9-29 

min. 9 

0 

0 - 20 

100 

max. 65 109-127 











suction trap 






461.621.00.1 GIS element for urinal Universal 

42 

7 5 -33 

R1 /2 

17-37 

10 7 

min. 114 

100-118 

0 

0 - 20

GIS element for urinal Universal, hidden new 



• For installation in part-height or room-height GIS division 

• For installation in part-height or room-height GIS partition wall 


• For accommodating the hidden urinal control 






• Installation height 114 cm, adjustable up to 132 cm 










max. 81 

min. 31 

0 

0-20 

100 

109-127 















461.689.00.1 GIS element for urinal Universal, UR hidden 

42 

7 5 -33 

R 1 /2 

7 5 9 

0 

0-20 

Element for bidet / for washbasin 

GIS element for bidet 

GIS element for bidet 

350 330 310 290 270 250 230 210 190 170 150 130 110 90 

360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 

964.162.00.0 

964.161.00.0 

80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 

GIS 

Element for bidet / for washbasin 


• For wall-hung bidet with upright tap unit 


• For ceramic appliance with fastening distance 18 cm or 23 cm 

• For assembly in a GIS preWall or partition wall 



• Tap plate height-adjustable, sound-absorbing 

• Distance of tap connections adjustable 


• Fastening for bidet height-adjustable 


• 2 water supply connections R 1/2" 

• 2 sealing washers 

• 2 protection plugs 

• Bidet outlet bend, HDPE, dia. 50 mm 






461.530.00.1 GIS element for bidet 


0 

0-20 

350 330 310 290 270 250 230 210 190 170 150 130 110 90 

360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 

964.162.00.0 

50 

8-38 

18/23 

80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 

964.161.00.0 

69 

10 

4 

0 

0-20

GIS 

Element for washbasin / Fixture plate 

Element for washbasin / Fixture plate 

GIS element for washbasin 

GIS element for washbasin 

32 






• Tap plate galvanized 



• 2 water supply connections R 1/2" 

• 2 acoustical insulation inserts 

• 2 sealing washers 

• 2 protection plugs 

• Outlet bend, HDPE, dia. 50 mm 






461.430.00.1 GIS element for washbasin 

7 6 

248 76 15 3 

Fixture plate / Mounting plate / Panel 

GIS fixture plate 






7 

1 5 

3 7 

GIS fixture plate 



461.038.00.1 GIS fixture plate, 153mm, galvanized 

GIS fixture plate for concealed shutt-off valve 



• For the installation of GIS concealed shut-off valve 


• Fixing lever pre-mounted 


7 6 

248 76 153 Ordering Information 


461.072.00.1 GIS fixture plate for concealed stop valve 

GIS fixture plate for for concealed wall-mounted tap 


2 




• Fixing lever pre-mounted 





461.178.00.1 GIS fixture plate for concealed wall-mounted tap 

Note 

• For concealed base unit, article no. 616.030.00.1, 

• For concealed wall mounted tap HyTronic87, article no. 

116.127.21.1, 

• For concealed wall mounted tap HyTronic88, article no. 

116.128.21.1, 

15 3 

27 

37 

12 

12 5 

7 

1 5 

7 7 

3 8 

11 5

Mounting plate / Panel 

GIS mounting plate for handle and holding 

system 

GIS wooden mounting plate 


• For fastening heavy loads, e. g. handle and support systems, wall 

cabinets, storage tanks 



• Water-resistant laminate 


Product material Wood 



461.035.00.1 

GIS wooden mounting plate for handle and holding 

systems, 57 x 30 x 3 cm 

Panel 

Panel 

GIS panel 130 x 60 x 1.8 cm 


• To create an unbroken surface on the GIS support system 

• For single-layer, vertical panelling of the GIS support system 


• Impregnated 

30 8 


Product material Plasterboard 



461.025.00.1 GIS panel, 130 x 60 x 1,8 cm 

60 

5 

5 

57 8 

130 

3 

1 3 

1 8 

GIS aqua panel 130 x 60 x 1.8 cm 

GIS 

Mounting plate / Panel 


• To create an unbroken surface on the GIS support system in areas 

subjected to extreme wet 


• Water-resistant 

• Without mineral fibers 


Product material Calcium silicate 



461.163.00.1 GIS aqua panel, 130 x 60 x 1.8 cm 

GIS panel for washbasin 


• For single-layer panelling of GIS washbasin elements 



• Holes for washbasin connections pre-drilled 





461.074.00.1 GIS panel for washbasin, 130 x 60 x 1.8 cm 


60 

60 

130 

130 

1 8 

1 8

GIS 

Attaching parts for element 

GIS panel for WC 

Balena 8000 


• For single-layer panelling of GIS carriers for wall-hung WC 



• Holes for wall-hung WC connections pre-drilled 

• Cutout section for service opening prepared 

• Non-combustible 





461.058.00.1 GIS panel for WC 

GIS panel screws in magazin 


• For quick fastening of the panelling and Aqua plasterboard panels to 

the GIS and Duofix support system 

• For the magazine screwdriver 

• Characteristics 

• Self-drilling screws 4.2 x 35 mm 


• Plastic magazine with 50 panel screws 



461.031.00.1 GIS panel screws in magazine 

GIS panel screws 


• For quick fastening of the panelling and Aqua plasterboard panels to 

the GIS and Duofix support system 


• Self-drilling screws 4.2 x 35 mm 



60 

461.030.00.1 GIS panel screws 

Balena 8000 

130 

GIS insulation tape 


1 8 


• To avoid the formation of cracks and for solid-borne sound insulation 

between GIS panelling and building structure 


• Single-sided self-adhesive 

• Permanently elastic 

•Vinyl foam tape 



461.036.00.1 GIS insulation tape 

GIS panel filler 


• For filling the gaps in panels 



•Powdery 

• Can be sanded with sandpaper 

• High water retention properties 



464.015.00.1 GIS panel filler, 5kg 


BSDFLNVBASHAB SDLI< 

VASDHCAHdv HASDC .KMHASD 

BSDFLNVBASHAB SDLI

GIS bolt M8 


• For fastening the GIS installation elements to the GIS support system 


• Thread M8 


•NutM8 


GIS mounting clip M10 


• For fastening installation parts and sanitary appliances to the GIS 

profile 


•Galvanized 

• Thread M10 

1 6 


461.006.00.1 GIS bolt M8 


• Locating and pressure test plug M10 for installation on-site 



461.004.00.1 GIS mounting clip M10 

GIS metal dowel 


• For fastening GIS L-shaped brackets to GIS panels with panel 

thickness 18 - 25 mm 


•M6 screw 



465.029.00.1 GIS metal dowel for cavity-wall 

2 5 

2 

1 7 

SW13 

M6 

M8 

SW 13 

M8 

M10 3 3 

Ø 1 1 

7 6 

M10 

2 

5 

2 7 

GIS heavy-duty dowel M8 

GIS 



• For fastening L-shaped brackets and set of free-standing GIS walls on 

the building structure (concrete) 


GIS installation set 


• For bracing the free-standing GIS support system 


• 2 support brackets, pre-mounted, galvanized 

• 4 ratchet pins M8 

•6nutsM8 

• 2 heavy-duty dowels 


GIS sound absorption plate 


• For solid-borne sound insulation of the GIS support system from the 

building structure 


• Self-adhesive 


M8 


461.037.26.1 GIS heavy-duty dowel M8 


461.660.00.1 GIS installation set 

Product material Cork 



461.014.00.1 GIS sound absorption plate 


8 6 

10-17 

5 

7 

0 8 

2 8 

20 

0 5

GIS 

Access opening 

GIS profil guide 


• For connecting two GIS support systems on one level 





461.064.00.1 GIS profile guide 

GIS corner stiffener 


• To make prefabricated GIS support systems more rigid 


•Galvanized 




• 2 allen screws M4 



461.089.00.1 GIS corner stiffener 

7 5 

2 

4 2 

2 

1 9 

7 5 


1 3 

5 8 



GIS set for access opening 


• To make a service opening in GIS walls 


• Size of the service opening 15 x 15 cm, to 0.5 m2 


• 2 joint angles with adjustable magnets 

• 2 contact plates 

• 2 pairs of fixing devices with safety catch 

• Silicone adhesive 

• Pull cord to open 



461.043.00.1 GIS set for access opening 

GIS set for access door 


• To make a service opening in GIS walls 


• Size of the service opening 20 x 20 cm to 50 x 100 cm 


• 2 hinge holders 

• 4 connection elements 

• Pressure opener 

• Silicone adhesive 



461.044.00.1 GIS set for access door

Pipe clip / Support bracket / Electric socket 

Pipe clip 

GIS pipe clip for drainage pipe 


• For fastening plastic drainage pipes to a GIS support system 



[mm] 

363.050.00.1 GIS pipe clip for drainage pipe 50 - 56 

364.052.00.1 GIS pipe clip for drainage pipe 63 




GIS pipe clip 


• For fastening supply pipes to a GIS support system 


• Adjustable from dia. 16 - 40 mm 

5 

20 5 



461.070.00.1 GIS pipe clip for dia. 16-32mm 

d 

Support bracket / Electric socket / Sound insulation 

Support bracket 

GIS 

Pipe clip / Support bracket / Electric socket 

Duofix support brackets for small ceramics WC 


• For WC elements GIS and Duofix 

• For additional support of WC ceramic appliances with contact 

surfaces smaller than 17 cm 

X 


• U-profiles, galvanized 





111.847.00.1 Support brackets for small ceramics WC 

Electric socket 














6 5 

6 5 

6 

5 5 3 5

GIS 

Sound insulation 










40 

42 





Description 

• Concealed dual flush cistern for low height furniture Page 46 

• Concealed single flush cistern for low height furniture Page 46 


Installation systems 




Low height concealed cistern for furniture, dual flush, 

incl. pneumatic flush actuator 


• For installation in bathroom furniture 

•For dual flush 

• Not suitable for solid construction 


• Pneumatic flush actuation 

• Water supply connection at the bottom left 


Factory setting 5.5 and 3 l 


• Dual flush actuator 


• Sleeve 


9 4 

R 1 /2 

30 

15 

46 4 

9 8 

44 5 



109.720.00.1 

Low height concealed cistern for furniture, dual flush, 

incl. pneumatic flush actuator 

35 5 

8 

8 


13 2 

6 5 29 

9 

7 5 -16 

M64x2 

Low height concealed cistern for furniture, single 

flush 


• For installation in bathroom furniture 

• For single flush 

• Not suitable for solid construction 


• Pneumatic flush actuation 

• Water supply connection at the bottom left 




• Sleeve 


• Excluded: Single flush actuator 


9 4 

R 1 /2 

Factory setting 5.5 l 


46 4 

30 

15 

109.721.00.1 Low height concealed cistern for furniture, single flush 

Note 

• For single flush 5.5 l see article no. 115.941 page 99, 

article no. 115.114 page 100, article no. 115.943 page 101, 

article no. 115.918 page 101. 

9 8 

44 5 

35 5 

13 2 

6 5 29 

7 5 -16

Actuator plates 

Description 

Overview • Overview actuator plates Page 48 

Design line 

Standard line 

Accessories 

Dual flush 

Flush-stop 

• Actuator plate Sigma20 Page 49 

• Actuator plate Sigma50 Page 49 

• Actuator plate Samba Page 50 

• Actuator plate Bolero Page 50 

• Actuator plate Kappa20 Page 53 

• Actuator plate Kappa50 Page 53 

• Actuator plate Rumba Page 51 

• Actuator plate Tango Page 52 

• Actuator plate Mambo Page 52 

Single flush • Actuator plate Sigma10 Page 51 

Dual flush 

Flush-stop 

• Actuator plate Delta21 Page 54 




• Extension set Page 55 

• Access cover Page 55 


Abbreviation 

Overview actuator plates 

Design 

Standard 

Installation element Actuator plate 

Kombifix, Duofix, 

Concealed 

dual flush flush-stop / single flush 

UP320 Sigma50 115.788.xx.1 Samba 115.770.xx.1 Sigma10 115.758.xx.1 Tango 115.760.xx.1 

Sigma20 115.778.xx.1 Bolero 115.777.xx.1 Rumba 115.750.xx.1 Mambo 115.751.00.1 

UP700 Sigma50 115.788.xx.1 Samba 115.770.xx.1 Sigma10 115.758.xx.1 Tango 115.760.xx.1 

Sigma20 115.778.xx.1 Bolero 115.777.xx.1 Rumba 115.750.xx.1 Mambo 115.751.00.1 

UP200 Kappa20 115.228.xx.1 Kappa50 115.260.xx.1 

Kappa50 115.258.00.1 

UP172 Delta21 115.125.xx.1 Delta50 115.135.xx.1 Delta11 115.120.xx.1 Delta40 115.130.xx.1 

UP182 Delta21 115.125.xx.1 Delta50 115.135.xx.1 Delta11 115.120.xx.1 Delta40 115.130.xx.1 



Sigma20 / Sigma50 Design actuator plate 

Design Sigma20 actuator / Sigma50 plate 

Sigma20 / Sigma50 

Actuator plate Sigma20 




• For installation element UP320, UP700 


Actuation force < 20 N 

Product material Plastic 


• Mounting frame 

• 2 Distance bolts 

•2 Actuator rods 


Article no. Colour 

[Frame / Ring / Button] 

115.778.KH.1 bright chr / matt chr / bright chr 

115.778.KN.1 matt chrome / bright chr / matt chr 

115.778.KM.1 black / bright chrome / black 

115.778.KK.1 white / gold-plated / white 

115.778.KJ.1 white / bright chrome / white 

115.778.KL.1 white / matt chrome / matt chr 









Inlay material Plastic 







115.788.DW.1 jet black RAL 9005 

115.788.11.1 white alpine 

115.788.EP.1 pergamon 

24 6 1 1 

16 4 

24 6 1 4 

16 4 

Actuator plate Sigma50 new 








Inlay material Glass 







115.788.SC.1 white glass satinised "grains" 

115.788.SE.1 green glass satinised 

115.788.SD.1 smoked glass reflective 






• For custom-made inlay, local source 








• Excluded: Inlay for actuator plate 

24 6 1 4 



115.788.00.1 Actuator plate Sigma50, customised 


16 4 

24 6 1 4 

16 4


Design actuator plate Samba / Bolero 

Samba / Bolero 

Samba / Bolero 

Actuator plate Samba 















115.770.10.1 bahama beige 

115.770.CG.1 manhattan 

115.770.DK.1 edelwhite 



115.770.FB.1 agais 

115.770.FR.1 star white 

24 6 1 5 

16 4 


Article no. Metallic finish 

115.770.21.1 bright chrome-plated 

115.770.46.1 matt chrome-plated 

115.770.DT.1 special brass (colour) 

115.770.GM.1 satinox 

115.770.KB.1 bright chrome / bright chr struct 

Actuator plate Bolero 





















115.777.FB.1 agais 


24 6 1 4 

16 4 







115.777.KB.1 bright chrome / bright chr struct


Sigma10 / Rumba Design actuator plate 

Sigma10 / Rumba 

Sigma10 / Rumba 











• Actuator rod 


24 6 1 1 

16 4 



[Frame / Ring / Button] 







Actuator plate Rumba 


• For flush-stop 







• Stop-and-go lever 












115.750.FB.1 agais 


24 6 1 5 









16 4


Design actuator plate Tango / Mambo 

Tango / Mambo 

Tamgo / Mambo 

Actuator plate Tango 






• Can be locked with screws 















115.760.45.1 gold-plated 




115.760.HC.1 palladium-plated matt 

115.760.KA.1 bright chrome / matt chrome 

246 1 

16 4 

Actuator plate Mambo 










Product material Stainless steel 






24 6 2 5 

16 4 



115.751.00.1 Actuator plate Mambo, stainless steel


Kappa20 / Kappa50 Design actuator plate 

Kappa20 / Kappa50 

Kappa20 / Kappa50 

Actuator plate Kappa20 



• For top/front actuation 

• For installation element UP200 




• Scope Of Delivery 





21 3 









115.228.FB.1 agais 


14 2 




























115.260.HC.1 palladium-plated matt 










• Actuator rods 

• Distance bolts 




115.258.00.1 Actuator plate Kappa50, stainless steel 


21 1 

21 1 

14 2 

14 2 

1 5 

1 5


Standard actuator plate Delta 

Standard Delta actuator plate 

Delta 

Actuator plate Delta21 new 











• Twist lock 


















• Twist lock 


24 6 

24 6 






16 4 

16 4 


2 6 

2 5 
































24 6 

24 6 






16 4 

16 4 

2 5 

2 5


Extension set / Access cover Accessories for actuator plates 

Accessories Extension set for / Access actuator cover plates 

Geberit extension set 

Extension set for actuator plates Samba, Rumba, 

Twist, Tango, Mambo, Bolero, Kappa, Sigma 


• For extending actuator plates up to an outer wall of max. 18 cm 


• 2 extensions for pusher rods 

• 2 extensions for distance bolts 




240.938.00.1 Extension set for actuator plates for UP200, 320, 700 

Extension set for actuator plates Delta 


• For extending actuator plates up to an outer wall of max. 18 cm 



• 2 extensions for pusher rods 

• 2 extensions for distance bolts 




240.058.00.1 Extension set for actuator plates Delta 

14 5 

11 5 

4 

Access cover 

Geberit access cover 

Cover plate for UP320/700/200, zinc diecasting 


• In connection with pneumatic remote control 115.114 / 115.941 / 

115.942 / 115.944 / 115.918 with dual flush or single flush, for frontoperated 

WC‘s 

• For installation element UP200, UP320, UP700 


• Access cover without flush actuator 













Cover plate for UP320/700, stainless steel 




WC‘s 












24 6 1 8 

115.798.00.1 Cover plate for UP320/700, stainless steel 


16 4 

24 6 1 8 

16 4


Accessories for actuator plates Access cover 

Cover plate for UP200 




WC‘s 















213 16 

14 2 


Cover plate for UP172/182, stainless steel new 


• For covering the service opening in remote flush actuation of 

concealed cisterns of Geberit 

• For use with UP172 and UP182 concealed cisterns 







• Assembly parts 



24 6 1 8 

16 4 

115.103.00.1 Cover plate for UP172/182, stainless steel


AquaClean 

complete solution 

for concealed cisterns 

with exposed cistern 

AquaClean enhancement solution 

Description 

• AquaClean 8000plus Page 58 

• AquaClean 8000 Page 58 

wall-hung • AquaClean 8000plus Page 59 

floor-standing • AquaClean 8000plus Page 59 

• AquaClean 5000plus Page 60 



AquaClean travel solution • AquaClean Piccolo Page 62 

Accessories 

• for AquaClean products Page 62 

• for AquaClean 8000plus Page 62 

• for AquaClean 5000 and 5000plus Page 63 



Complete solution, for concealed cisterns, wall-hung 

Complete solution, for concealed cisterns, wall-hung 

AquaClean, complete solution for concealed 

cisterns, wall-hung 

AquaClean 8000plus 

20 5 

21-25 


• Convenient paper-free toilet use 

• For cleaning the anal and vaginal area 


• Surface-coated ceramic appliance 

• Infrared user detection 

• WC seat and lid with lowering function 

• Automatic air purification with active carbon filter 

• Spray arm with extendable nozzles for anal and vaginal area 

• Spray arm can be freely positioned 

• Hot and cold water shower with integrated hot water tank 

• Temperature of shower water can be adjusted 

• Massage spray 

• Oscillating spray (automatic forwards and reverse motion of the spray 

arm can be adjusted) 

• Spray intensity can be regulated 

• Automatic pre and post rinsing of the spray nozzles with water 

• Automatic disinfecting of the spray nozzles 

• Warm air dryer 

• Temperature of warm air dryer can be adjusted 

• Four user profiles can be programmed 


Power input 1000 W 

Nominal voltage 230 V AC 

Mains frequency 50 Hz 

Pressure range 1 - 10 bar 

Flow rate 1.4 - 5.5 l/min 

Air volume flow rate suction 10 m³/h 

Air temperature range 20 - 45 °C 

Water temperature, factory setting 37 °C 

Boiler capacity 1.8 l 

Power input standby 5 W 

Protection degree IP x4 


• Remote control with LC display, wall bracket and batteries, LR03 

(AAA) 

• Cover plate for remote control opening 

• Water supply connection set with T-piece, metal-reinforced hose and 

screw connection 

• Activated carbon filter 

• Dryer fan with housing 

• Acoustical insulation set 

• Nozzle cleaning agent Jetclean 8000 

• Spray shield 








42 

18-20 43 

5-9 

13 5 


61 5 

2 5 

41 5 -45 5 

AquaClean 8000 new 



• For cleaning the anal area 





• Spray arm with extendable nozzle for anal area 


• Water heater selection button (heating ON, OFF or on seat contact) 

• 2 water temperature settings (warm / cold) 


arm) 




20 5 

21-25 

Load WC seat / WC lid max. 150 kg 


Cable length 0.7 m 

Mains frequency 50 - 60 Hz 


Power input standby 

3.0 / 11.3 (with 

boiler heating) W 

Protection class I 




Humidity max. 95 % 

relative 

Net weight 27,5 kg 


Temperature range during storage -20 - +70 °C 



• Water supply connection set with branch fitting, hose and union 







42 

18-20 43 

5-9 

13 5 

61 5 

2 5 

41 5 -45 5

Complete solution with exposed cistern 

AquaClean, complete solution with exposed 

cistern 

AquaClean 8000plus, wall-hung 

42 

73 3 




88 


















• Three user profiles can be programmed 

• WC flushing with remote control 













42 

92-96 

21-25 




(AAA) 







73 3 

405-445 4-8 











Complete solution with exposed cistern 

AquaClean 8000plus, floor-standing 

42 

73 5 





• Adjustable WC seat from 40.5 - 52.5 cm (2 cm steps) ) 

















• Three user profiles can be programmed 

• WC flushing with remote control 












96 

42 

96 

max. 87 

min. 56 

25 

14-28 

73 5








(AAA) 


















AquaClean 5000plus new 

19 5 

29 

13-16 5 

11 

51 

29 5 

5 

3 5 

38 5 

22 5 

48 5 


• For gentle cleaning of the anal area with water in private toilets 

• For convenient toilet use 

• For later installation on ceramic appliance (for replacing seat and lid) 


• For paper-free and odourless toilet use 


• Tactile differentiated actuator buttons 


• Spray intensity adjustable in 7 levels 

• Spray intensity is saved 




• Massage jet can be added 



• Warm air dryer can be added 



• Water heater selection button (heating ON, OFF or on seat contact) 

• Power connection with concealed pipe-laying option to the left or right 

18 5 

55 

15 R 

30 30 

22 

3 /8 

25 60 Sanitary Systems Catalogue 2009/2010 

15 5 

3 5 


• Automatic pre and post rinsing of the spray nozzle with fresh water 

• Integrated hot water tank 

• Water supply connection on the left side 



Boiler capacity 1,65 l 

Cable length 2 m 




0.9 / 6.7 (with boiler 

heating) W 




Flow rate 0.5 - 3 l/min 

Humidity max. 95 % relative 





• Water supply connection set, standard 


(AAA) 




• Compensation pad for toilet seat / appliance 

• Replacement nozzle 






146.110.EP.1 pergamon


19 5 

29 

13-16 5 

11 

51 

29 5 


• For convenient and odourless toilet use 











• Boiler mode can be adjusted 









Boiler capacity 1,65 l 





0.9 / 6.7 (with 

boiler heating) W 




Flow rate 0.5 - 3 l/min 

Humidity max. 95 % 

relative 










• Replacement nozzle 

5 

3 5 

38 5 

22 5 

48 5 

18 5 

55 

15 15 5 

R 

30 30 

22 

3 /8 

25 3 5 










14 

13-165 26 

10 

50 5 

28 5 

5 

22 5 



• For convenient toilet use 






• Boiler mode can be adjusted 














0.9 / 5.8 (with boiler 

heating) W 






Net weight 4.1 kg 

Pressure range 0.5 - 10 bar 











R 1 /2 

1 5 

30 

40 

30 

15 5 

55 

1 5 

5 5 

14 5 

17 

4 

3


Travel solution / Accessories For AquaClean products / AquaClean 8000plus 

Travel solution / Accessories 

AquaClean travel solution 

AquaClean Piccolo 



• For cleaning the anal area 


• Portable perineal shower 


Tank capacity 400 ml 


•Bag 

• Battery LR6 (AA) 



148.050.00.1 AquaClean Piccolo 

Accessories 

For AquaClean products / AquaClean 8000plus 

Acessories for AquaClean products 

Empty pipe for water supply 


• To connect a AquaClean to a concealed cistern 

• For UP300 and UP320 concealed cistern 

6 7 

8 9 

13 4 6 

209 298 Ordering Information 


242.010.00.1 

Empty pipe for AquaClean water supply for later 

installation 

For AquaClean 8000plus 

Cleaner JETCLEAN 8000 


• For disinfecting the spray nozzles 


• To prevent the growth of bacteria 

• For approx. 750 uses (400 ml) 



Accessories for AquaClean 8000plus 


250.028.00.1 

Water supply connection set, conventional 


• For use with AquaClean 8000plus 

• For conventional water supply connection 


• Metal-reinforced hose R 1/2" x 3/8" 

• Angle stop valve R 1/2" 

• Connection material 



250.036.00.1 

Water supply connection UP200 concealed cistern, 

for AquaClean 8000, AquaClean 8000plus new 


• For UP200 concealed cistern with top/front actuation 

• For connecting AquaClean 


Cleaner for nozzle JETCLEAN for AquaClean 

8000plus 

Water supply connection set, conventional for 

AquaClean 8000 and 8000plus 


240.839.00.1 

Water supply connection UP200 concealed cistern, 

for AquaClean 8000, AquaClean 8000plus


For AquaClean 5000, 5000plus and AquaClean 4000 Accessories 

Carbon Filter 



250.022.00.1 Carbon filter for AquaClean 8000plus 











For AquaClean 5000, 5000plus and AquaClean 4000 

Connection set rear centre 


• To connect a AquaClean module to a surface-mounted cistern with 

water supply connection at the rear centre 


• 2 metal-reinforced hoses R 3/8" 

• Connection bend ø 5.6 mm 

• Connection material 

6 5 





115.438.00.1 Connection set rear centre for AquaClean 4000 

6 5 

6 

5 5 3 5 

Accessories for AquaClean 5000, 5000plus and 

AquaClean 4000 

Water supply connection set on UP320 for 



• To connect a AquaClean module to a concealed cistern 



249.801.00.1 Connection set Kombifix/GIS for AquaClean 4000 

Water supply connection set for exposed cistern at 

the right, AquaClean enhancement solution 


• To connect a AquaClean module to a surface-mounted cistern with 

water supply connection on the right 



240.396.00.1 Connection set from right for AquaClean 4000 

Adapter plate complete 


• For AquaClean 5000 and 5000plus 



240.495.00.1 Adapter plate compl. AquaClean 5000 and 5000plus 

Connection elbow 3/8" with screw joint 





Accessories For AquaClean 5000, 5000plus and AquaClean 4000 



241.586.00.1 Connection elbow 3/8'' with screw joint 

Connection set UP200 H82, for AquaClean 

enhancement solution 




• For installation elements with construction height 82 cm 



240.634.00.1 Connection set UP200 H82 

Water supply connection set UP200 H98, for 





• For installation elements with construction height 98 cm 



240.635.00.1 Connection set UP200 H98 

Water supply connection set, standard 


• For use with AquaClean 5000 

• For use with AquaClean 5000plus 



242.185.00.1 Water supply connection set, standard 


Active carbon filter, for AquaClean 5000 and 

5000plus 





Active Carbon Filter for AquaClean 5000 and 

240.116.00.1 

5000plus, Set of 2 pcs

Exposed cistern 

Exposed cistern for low-level 

installation 

Exposed cistern for high-level 

installation 

Exposed cistern for closecoupled 

installation 

Replacement filling valve and 

flush mechanism 

for ceramic cistern 

Accessories 

flush-stop 

Flush-type Description 

• AP123, water supply connection left or right Page 66 

• AP123, pneumatic, with flush bend Page 66 

• AP110, 6 - 9 l Page 68 

• AP113, 6 l Page 68 

single flush • AP123, pneumatic, without flush bend Page 66 

dual flush 

single flush 

dual flush 

• AP117, water supply connection left, right or 

at the rear centre 

Page 68 

• AP123, with draw chain Page 67 

• AP123, pneumatic Page 67 

• AP128, water supply connection from rear Page 67 

• AP117, water supply connection left or right 

or at the rear centre 

• Sets with filling valve and flush mechanism 

Impuls590 

Page 68 

Page 69 

• Filling valve Impuls380 / Impuls360 Page 70 

• Filling valve ImpulsBasic330 Page 72 

• Flush mechanism ImpulsBasic230 Page 73 

• Flush mechanism Impuls280 Page 71 

• Flush pipes Page 74 

• Accessories for flush pipes Page 77 

• Accessories for water connection Page 73 



AP123 single flush 

AP123 single flush 

AP123 for low-level installation 

AP123 cistern 6 - 9 l, flush-stop, with flush bend 


• For exposed installation 



• Impuls380 filling valve 

•Flush-stop 

• Water supply connection left and right, 3/8" 


Factory setting 9 l 

Flush volume range 6 / 9 l 


• Flush pipe 23 x 23 cm, dia. 50/44 mm 


• Excluded: Angle stop valve R 1/2" 




AP123 cistern 6 - 9 l, pneumatic, without flush bend 


• For installation behind the wall or in furniture 

• For pneumatic remote flush actuation 



• Single flush or dual flush 




30 5 –3 

30 5 –3 

41 

33 

41 

33 






• Excluded: Flush pipe 

38 

38 



4 5 

6 5 

4 5 

6 5 

12 8 

12 8 

6 5 

6 5 

38 

38 



Note 

• For dual flush 3 l and 6 l or 9 l see Article no. 115.941, page 99, Article 

no. 115.944, page 100, Article no. 115.999, page 100 

• For single flush 6 l or 9 l see Article no. 115.941, page 99, 

Article no. 115.114, page 100, Article no. 115.943, page 101, Article 

no. 115.918, page 101 

• For flush pipes dia 50/44 mm, see Article no. 118.200, page 75 

• For flush pipe joint adapter, see Article no. 152.434.16.1, page 75 

AP123 cistern 6 - 9 l, pneumatic, with flush bend 


• For installation behind the wall or in furniture 


• For thin walls with max. 70 mm thickness in combination with floor 

mounted WC 










• Flush bend 38 x 5.2 cm, dia. 50/44 mm 






30 5 –3 

41 

33 

Note 

• For dual flush 3 l and 6 l or 9 l see Article no. 115.942, page 100, 

Article no. 115.944, page 100, Article no. 115.999, page 100 

• For single flush 6 l or 9 l see Article no. 115.941, page 99, Article no. 

115.114, page 100, Article no. 115.943, page 101, Article no. 

115.918, page 101 

• For flush pipe connector see Article 118.026, page 75 

38 

4 5 

6 5 

12 8 

6 5 

38

AP123 single flush / AP128 dual flush 

AP123 for high-level installation 

AP123 cistern 6 - 9 l, with draw chain 

205±6 



• For mechanical remote flush actuation 









•Draw chain 

• Damming device 







Note 

• For flush pipes for exposed installation, dia. 32 mm, see page 74 ff 

• For flush pipes oriental WC, exposed installation, see Article 119.502 

page 74 or 119.503, page 74 and 242.018, page 77 ff 

• For flush pipes for concealed installation see Article no. 119.611 or 

119.626 and 119.610, 118.026, page 75 ff 

AP123 cistern 6 - 9 l, pneumatic 




0 

30 5 ±3 

30 5 –3 

41 

33 

41 

33 

211 5 

38 

4 5 

6 5 

4 5 

6 5 

12 8 

12 8 

6 5 

6 5 

38 

38 
















AP123 single flush / AP128 dual flush 



Note 

• For dual flush 3 l and 6 l or 9 l see Article no. 115.942, page 100, 

Article no. 115.944, page 100 

• For single flush 6 l or 9 l see Article no. 115.941, page 99, Article no. 

115.114, page 100, Article no. 115.943, page 101, Article no. 

115.918, page 101 

• For flush pipes for exposed installation, dia. 32 mm, see page 74 ff 

• For flush pipes for concealed installation see Article no. 119.611 or 

119.626 and 119.610, 118.026, page 75 ff 

• For surface mounted installation see Article no. 119.504, page 74 

• For surface mounted installation oriental WC see Article no. 119.502, 

page 74, or 119.503, page 74, and 119.696, page 77 

AP128 

AP128 for close-coupled suit, dual flush 

AP128 cistern 6 - 9 l, water supply from rear back 

74 5 ±2 






• Low noise emission 

• Dual flush 

• Cover, cigarette burn resistant 







• Angle stop valve R 1/2" 





22 

0 

40 

30 

82 5 

168 45 8 

405 40+2-1


AP113 / AP117 / AP110 

AP113 / AP117 / AP110 

AP113 for low-level installation 

AP113 cistern 6 l, flush-stop 






•Flush-stop 

• Water supply connection left or right or at the rear centre 










AP117 

AP117, dual flush 

AP117 cistern for low-level installation 

0 

16-26 






• Water supply connection 3/8“ on the right/left side, at the rear centre, 

at the bottom right/left 













40 

56-66 

343 68 Sanitary Systems Catalogue 2009/2010 

5 

48-58 

14 

44 

AP117 cistern for closed-coupled installation new 

0 




•Close-coupled 




• Water supply connection 3/8“ on the right/left side, at the rear centre, 

at the bottom right/left 











AP110 

AP110, flush-stop 

AP110 cistern 6 - 9 l, flush-stop 






•Flush-stop 

• Low-mounted 

• Water supply connection left and right 











56 

22 

5 8 

44-56 

40 

41 

23 

44 

84 

7 2 

30 35 

0 

5 

5 

14 

13 5 

6 2 

44 

40+2-1 

5 8 

38 7 

16 5 -26 5


Impuls590 Replacement filling valve and flush mechanism for ceramic cistern 

Replacement Impuls590 filling valve and flush mechanism for ceramic cistern 

Sets with filling valve and flush mechanism 

Impuls590 

Impuls590 for ceramic cisterns, with Impuls360 3/8" 

filling valve, bottom inlet 


• For replacement sector 

• Can be installed in ceramic cisterns 



• Water supply connection 3/8“ plastic, bottom inlet 

• Push button bright chrome-plated / blue 


• Dual flush unit 

• Dual flush actuator with rosette 



•Blue box 



283.311.KD.1 
















WL 

WL 

CL 

CL 


•Blue box 



283.312.KD.1 



Impuls590 for ceramic cisterns, with Impuls380 filling 

valve, water supply connection 3/8" and 1/2" 






• Water supply connection 3/8“ and 1/2" brass on the right/left side, at 

the rear centre, at the bottom right/left 





• Impuls380 filling valve with connection hose 

• Adapter 3/8“-1/2“ 

• Valve clip 


•Blue box 



283.313.KD.1 


and 1/2" filling valve 



Replacement filling valve and flush mechanism for ceramic cistern Filling valve Impuls380 / Impuls360 

Filling valve Impuls380 / Impuls360 

Filling valve Impuls380 / Impuls360 

Replacement filling valve Impuls380 3/8" and 1/2", 

side inlet 



• Can be installed in surface-mounted cisterns 


• The filling height can be set by turning the spindle 

• Water supply connection 3/8“ and 1/2" brass on the right/left side 




• Spacer ring set 

• Spacer 

• Rosette dia. 40 mm 

• Adapter 3/8“-1/2“ 

•Blue box 



281.004.00.1 

Replacement filling valve Impuls380 3/8" and 1/2", 

side inlet 


Replacement filling valve Impuls360 3/8", bottom 

inlet 

WL WL 

CL CL 





• Height-adjustable 





• Seal 

•Nut 

•Blue box 

235 - 385 

41.5 

25 

WL 

CL 

G 

92 

146 - 296 

9 - 15 



281.207.00.1 Replacement filling valve Impuls360 3/8", bottom inlet 

96 

71


Flush mechanism Impuls280 Replacement filling valve and flush mechanism for ceramic cistern 

Replacement filling valve Impuls360 1/2", bottom 

inlet 

WL WL 

CL 









• Seal 

•Nut 

•Blue box 


235 - 385 

41.5 

25 



WL 

CL 

G 

92 

146 - 296 

9 - 15 

281.208.00.1 Replacement filling valve Impuls360 1/2", bottom inlet 

96 

71 

Flush mechanism Impuls280 

Flush mechanism Impuls280 

Replacement flush valve Impuls280, dual flush 





• Overflow pipe height-adjustable 

• Adjustable flush volume depending on amount of water in cistern 

• Dual flush actuator with threaded rod for fastening the cistern lid 




min. 0 8 

max. 1 5 

Actuation force 18 N 







•Blue box 

312-45 293-431 17-27 

min. 0 9 

max. 2 

3 8- 4 5 1 2- 4 5 



282.303.KD.1 Replacement flush valve Impuls280, dual flush 


8 

16


Replacement filling valve and flush mechanism for ceramic cistern Filling valve ImpulsBasic330 / ImpulsBasic340 

Filling valve ImpulsBasic330 / ImpulsBasic340 

Filling valve ImpulsBasic330 

Replacement filling valve ImpulsBasic330 3/8", side 

inlet 





• Water supply connection 3/8“ brass on the right/left side 




•Nut 

• Seal 

• Green box 



136.723.00.1 


inlet 


inlet 





• Water supply connection 1/2“ brass on the right/left side 




•Nut 

• Seal 

• Green box 



136.724.00.1 


inlet 




Replacement filling valve ImpulsBasic340 3/8", 

bottom inlet new 









• Seal 

•Nut 

• Green box 



136.725.00.1 


bottom inlet 


bottom inlet new 









• Seal 

•Nut 

• Green box 



136.726.00.1 

304 

304 

95 

95 

25 

34 CL 

min. 140 

max. 230 

45 

G 3/8" 

25 

34 CL 

min. 140 

max. 230 

45 

G 1/2" 


bottom inlet


Flush mechanism ImpulsBasic230 Accessories 

Flush mechanism ImpulsBasic230 

Flush mechanism ImpulsBasic230 

Replacement flush valve ImpulsBasic230, 

dual flush 





• Overflow pipe can be shortened 

• Small and large adjustable flush volume depending on the amount of 

water in cistern 

• Dual flush actuator with threaded rod for fastening the cistern lid 


• Push button bright chrome-plated 


Actuation force 18 N 

Flush range small 3 - 4.5 l 

Flush range large 6 - 9 l 



• Dual flush actuator 

• Green box 

min. 0 8 

max. 1 6 

min. 0 9 

max. 2 

3 8- 4 5 

30-45 



136.909.21.1 Replacement flush valve ImpulsBasic230, dual flush 

6 - 7 

9 

8 5 

Accessories 

For water connection / For high-level installation 

Accessories for water connection 

Adapter for float valve, rear middle 



[mm] 

Adapter elbow 3/8" x 3/8" 



240.712.00.1 Adapter elbow 3/8" x 3/8" for concealed cistern 

Retrofit set for Impuls380 filling valve 



240.047.00.1 Retrofit set for concealed cistern 15.000/16.000 

Eccentric pipe connector for Impuls380 filling valve 

46 



240.711.00.1 Eccentric pipe connector fro Impuls380 filling valve 

Angle stop valve 1/2" 



238.192.00.2 

Angle stop valve 1/2" for cistern AP113, AP117, 

AP110 


G 

[''] 

240.017.00.1 10 3/8 

10


Flush pipe / Flush bend Flush pipe dia. 32 mm 

Connection pipe for Impuls380 filling valve 



[mm] 

Connection hose 3/8" for Impuls380 filling valve 



240.166.00.1 Metal hose 3/8" for Impuls380 filling valve 

Metal hose 3/8"-3/8" 



238.244.00.2 Metal hose 3/8" for cistern AP113, AP117, AP110 

Flush pipe dia. / Flush 32 bend mm 

Flush pipe, with pipe straps 


• For connection of a half height mounted cistern with WC 


Product material PVC 


• 2 pipe straps 

G 

[''] 

240.710.00.1 10 3/8 

G 

Flush pipe dia. 32 mm, for exposed cistern, for 

high-level installation 

X 

A 

d 

d 

X1 


Article no. dØ A X X1 K Colour 

[mm] [cm] [cm] [cm] [cm] 

119.504.11.1 32 6,5 156 24 27 white alpine 

119.604.11.1 32 8 156 24 27 white alpine 

K 

10 6 

d 

Flush pipe for oriental WC 



• For connection of high level, surface mounted cistern with oriental WC 




• 2 pipe straps 

•Adhesive 

• Threaded socket 



[mm] 

Flush pipe for oriental WC, with fixation material 


• For connection of high level, surface mounted cistern with oriental WC 



G 

[''] 

A 

[cm] 

X 

[cm] 

K 

[cm] 

Colour 

119.503.11.1 32 1 1/4 6,5 200 27 white alpine 



[mm] 

X 

X 

A 

[cm] 

A 

d 

d 

G 

A 

d 

d 

X 

[cm] 

K 

[cm] 

Colour 

119.502.11.1 32 6,5 150 27 white alpine 

K 

K


Flush bends for exposed cistern Flush pipe / Flush bend 

Flush bends for exposed cistern 

Flush bend for exposed cistern, high-level 

installation 

PE flush bend, for wall thickness 0 - 28 cm 


• For connection of a surface mounted cistern, installed inside an 

installation shaft, with a WC mounted in the adjoining bathroom 


Product material PE 




Article no. dØ d1Ø arc X X1 L Colour 

[mm] [mm] [cm] [cm] [cm] 

118.200.16.1 50 45 90° 28 4 28 black 

Extension for flush pipe, 90° 

d 

30 


• For extension of flush pipes and flush bends from high level, surface 

mounted cisterns 




•Adhesive 



[mm] 

arc Colour 

119.060.11.1 32 90° white alpine 

Extension for flush pipe 


• For extension of flush pipes and flush bends from high level, surface 

mounted cisterns 




•Adhesive 



[mm] 

X 

11 5 

d 

d 

X1 L 

L 

[cm] 

Colour 

119.063.11.1 32 46,5 white alpine 

L 

d1 

d 

d 

Flush pipe for flushing valve / for WC 

Flush pipe for flushing valve 

Flush pipe, offset 


• For connection of a flush valve with WC 




• Reduction sleeve 

• Excluded: Push-on seal 


Article no. dØ d1Ø diØ A X X1 K Colour 

[mm] [mm] [mm] [cm] [cm] [cm] [cm] 

119.629.11.1 30 44 25 8,5 78 22 14 white 

alpine 

Flush pipe for WC 

X 

A 

d/di 

Flush pipe connector dia. 45 mm, rosette round 








Article no. dØ d1Ø diØ Colour 

[mm] [mm] [mm] 

118.026.11.1 45 40 44 white alpine 


Inlet set for wall-hung WC, dia. 45 mm with rubber 

l 

L 


• Seal 


Article no. dØ L l Colour 

[mm] [cm] [cm] 

152.434.16.1 45 18,5 16 black 


K 

X1 

d d1 

d 

8 

d d1 

8 5 

d1 

3 5 

55 

25 

di


Flush pipe / Flush bend 

Flush pipe connection bend, with rosette 


• For connection of high level surface mounted cistern with a concealed 

flush pipe 




•Rosette 



[mm] 

Flush pipe for concealed cistern, three parts 

L2 

A 


• For connection (concealed) of high level surface mounted cistern with 

WC 


• Telescopic 

• 3-section 




• Recess shells 

•Adhesive 


X 

[cm] 

X1 

[cm] 

Colour 

119.610.11.1 32 24 12 white alpine 



[mm] 

7 5 

2 

L1 

d1Ø 

[mm] 

d 

A 

[cm] 

L 

[cm] 

L1 

[cm] 

L2 

[cm] 

Colour 

119.611.16.1 32 45 9,5 7,5 173 7 black 

L 

X1 

d 

5 

d 

7 

d1 

X 

Flush pipe 103 x 22 cm 



• For connection of half height mounted cistern with WC 




•Pipe strap 

•Buffer 




[mm] 

Flush pipe concealed, three parts, for oriental WC 


• For connection (concealed) of high level surface mounted cistern with 

oriental WC 


• Telescopic 

• 3-section 




• Recess shells 

•Adhesive 


d1Ø 

[mm] 

A X X1 X2 K Colour 

[cm] [cm] [cm] [cm] [cm] 

118.100.11.1 50 44 6 53 50 22 14 white alpine 



[mm] 

X 

X1 

G 

[''] 

A 

L1 

68 

d 

X2 

K 

L 

L2 

A 

A 

[cm] 

L 

[cm] 

L1 

[cm] 

L2 

[cm] 

Colour 

119.626.11.1 32 1 1/4 10 7,3 173 7,6 white alpine 

5 

d 

d1 

7 

G


Accessories for flush pipes Flush pipe / Flush bend 

Accessories for flush pipes 

Accessories for flush pipes 

Rosette, in PP, dia. 32 mm 



[mm] 

D 

[cm] 



Article no. dØ D H Colour 


854.804.11.1 40 8,5 3,5 white alpine 


H 

[cm] 




854.909.11.1 50 8,5 3,5 white alpine 

894.094.11.1 50 9 7 white alpine 

Rubber seal for WC inlet connector 

Colour 

892.928.11.1 32 8,5 3,5 white alpine 

d 



D 

L 

[mm] 

[cm] 

[cm] 

242.018.00.1 32 5,5 2,5 

119.668.00.1 44 5,5 2,5 

H 

D d 

H 

D d 

H 

D d 

L 

D 

Rubber seal for WC inlet connector, in EPDM 



[mm] 

Flush nozzle for oriental WC 




D 

[cm] 

Chain with handle for high level cisterns 

L 

[cm] 

119.675.00.1 44 6,8 3,3 



215.177.00.1 Chain with handle for high level cisterns 


d 

L 

D


Taps & Flush systems 

Flush control 

Flush actuator 

electronic infrared 

pneumatic 

manual 

Pneumatic flush actuator 

Taps for washbasin 

Urinal partition 

Accessories 

infrared 

Description 

• HyTronic, Mambo, stainless steel cover Page 80 

• HyTronic, Samba Page 81 

• HyTronic, Bolero Page 82 

• HyTronic, Tango Page 83 

• HyTronic, Sigma10 Page 84 

• HyTronic, Sigma50 Page 85 

• HyTronic, hidden Page 90 

• HyTronic, exposed Page 92 

• HyBasic, plastic cover Page 90 

• HyTouch, Mambo, stainless steel cover Page 86 

• HyTouch, Samba Page 86 

• HyTouch, Bolero Page 87 

• HyTouch, Tango Page 87 

• HyTouch, Sigma10 Page 88 

• HyTouch, Sigma50 Page 88 

• HyTronic electronic WC-remote control Page 94 

• HyTronic WC IR-control for support 

hand rail 

Page 94 

automatic • HyTronic touchless WC flushing Page 97 

hand-operated • HyTouch pneumatic flush actuator Page 99 

foot-operated 

• HyTouch pneumatic flush actuator wall 

mounted 

Page 101 

infrared • HyTronic60 Page 102 

automatic • HyTronic8X Page 105 

self-closing • HyTouch26 Page 113 

• HyTec, glass Page 114 

• HyBasic, UT60 Page 114 

• for urinal and WC electronic Page 93 

• for WC control Page 98 



Flush control Urinal electronic - infrared 

Flush Urinal control electronic - infrared 

Urinal electronic - infrared 

HyTronic urinal flush control, infrared-controlled, 

mains operation, Mambo new 


• For automatic flush actuation of urinals 

• For installation in urinal installation elements with front actuation 

• For installation in urinal installation set 

• Not suitable for installation in Joly urinal installation element with lateral 

concealed housing 

• Not suitable for installation in installation elements with top actuation 


• Automatic flush actuation, user-controlled 

• Infrared detection with background fade-out 

• Ready for operation after mains connection 

• Power-failure control system closes valve in case of mains failure 

• Functions can be adjusted and queried with with HyTronic Service 

Handy 

• Flush actuator can be deactivated by HyTronic Clean Handy 

• Dynamic flushing time adjustment 

• Stainless steel cover plate, with securing bar 


Interval flush factory setting 24 h 

Interval flush adjustment range 1 - 168 h 



Test pressure air / inertgas 3 bar 

Activation time 7 s 

Activation time range 3 - 15 s 


Power input < 0.5 W 

Protection degree IP 45 

Nominal voltage 110 - 240 V AC 

Operating voltage 4.5 V DC 

Default flush time 4 s 

Flush time range 3 - 15 s 

Humidity < 100 % relative 


Operating temperature water max. 30 °C 


• Cover plate with infrared window 

• Infrared control, premounted on fixation frame 

• Power supply unit 

• Solenoid valve 


13 



116.023.FW.1 stainless steel brushed 

13 


1 1 


battery operation, Mambo new 











• Warning if the battery is low 


Handy 



• Stainless steel cover plate, with securing bar 









Battery type Lithium 1.5 V (AA) 

Battery lifetime Alkaline > 1.5 years 

Battery lifetime Lithium > 2 years 



Operating voltage 3 V DC 









•Battery box 

• 2 lithium batteries 



13 




13 

1 1


Urinal electronic - infrared Flush control 


mains operation, Samba new 














Handy 



• Die-cast zinc cover plate, with securing bar 

























13 






13 

0 9 


battery operation, Samba new 













Handy 




































13 

13 

0 9




mains operation, Bolero new 














Handy 

































13 

13 


1 2 


battery operation, Bolero new 













Handy 






























13 






13 

1 2




mains operation, Tango new 














Handy 

































13 

13 

0 8 


battery operation, Tango new 













Handy 




































13 

13 

0 8




mains operation, Sigma10 new 














Handy 




































13 

13 


1 


battery operation, Sigma10 new 













Handy 






































13 

13 

1




mains operation, Sigma50 new 














Handy 






























116.026.GH.1 brushed chrome 

13 

13 

1 


battery operation, Sigma50 new 













Handy 
































116.036.GH.1 brushed chrome 


13 

13 

1


Flush control Urinal pneumatic 

Urinal pneumatic 

Urinal pneumatic 

HyTouch urinal flush control, pneumatic, manual 

actuation, Mambo new 


• For manual flush actuation of urinals 


• For installation in urinal installation elements with top actuation 



• Manual flush actuation 

• Low flush actuation force 

• Flush actuation when the actuator button is released 

• Flush time setting with air nozzles (pneumatic) 

• Stainless steel actuator plate, with securing bar 






Flush time range 4 / 8 / 12 s 





• Actuator plate 

• Pneumatic control, pre-mounted on mounting frame 

•Pneumatic valve 


13 




13 


1 3 


actuation, Samba new 











• Plastic actuator plate, with securing bar 















13 






13 

0 9


Urinal pneumatic Flush control 


actuation, Bolero new 


























13 






13 

1 2 


actuation, Tango new 











• Die-cast zinc actuator plate, with securing bar 





















13 

13 

1 1


Flush control Urinal pneumatic 


actuation, Sigma10 new 


































13 

13 


1 3 


actuation, Sigma50 new 































116.016.SE.1 green glass satinised 

116.016.SD.1 smoked glass reflective 

116.016.SC.1 white glass satinised "grains" 

13 

13 

1 4


Urinal pneumatic Flush control 


actuation, Sigma50, customised new 




























116.016.00.1 

HyTouch urinal control PN, manual Sigma 50, 

customised 

13 

13 

1 4 

Urinal Installation set Universal new 


• For concealed installation in solid constructions 







• Water supply connection radially sealing 



• Terminal provided 

• The protection cover protects the servicing opening against moisture 

and dirt 






Test pressure 16 bar 








116.001.00.1 UR installation set Universal 


15 

15 

R 1 /2 

R 1 /2 

10 5 

13 5 

7 1-9 

10 5


Flush control Urinal electronic - hidden / HyBasic 

Urinal electronic - hidden / HyBasic 

Urinal electronic - hidden 

HyTronic urinal control, hidden, mains operation, 

universal new 



• For automatic and hidden flush actuation of urinals 




• Not suitable for installation in installation elements with electronic or 

pneumatic actuation 


• Automatic flush actuation 

• Hidden user detection 

• Vandal-proof 

• Not affected by external factors 

• Electrical power supply via power supply 


• Adjustable flushing time 


Handy 









Power input < 1 W 






Humidity 95 % relative 






• Electronics module, pre-mounted on mounting frame 

• Odour trap with clip and sensor 





116.010.00.1 HyTronic UR-control universal hidden 

Urinal electronic - HyBasic 

Urinal electronic - HyBasic 


HyBasic urinal electronic IR, 230 V, plastic cover 



• For private, semi-public and public buildings 




• Cover plate made of plastic 



• Electrical power supply via power supply unit 



Activation distance adjustment range 15 - 50 cm 











Calculated flow rate 0.22 l/s 



Pressure min. 1 bar 


• Cover plate 

• Infrared control 




• 4 fastening screws 

16 3 





16 3 2 5


Urinal electronic - HyBasic Flush control 

HyBasic urinal electronic IRB, Battery 9 V, plastic 

cover 



• For private, semi-public and public buildings 




• Cover plate made of plastic 


• Battery-operated 

• LED display for battery capacity 








Battery type HR22 (9 V) 







Operating pressure min. 1 bar 





•Battery 9V 


• 4 fastening screws 

16 3 





16 3 2 5 

Housing for urinal electronic/pneumatic 

994.142.00.0 

int. 6836-97 

O Fliesenleger 

O Tiler 

O Carreleur 

O Piastrellista 

O Tegelzetter 

O Alicatador 

O Plytkarz 


• For concealed installation in solid or drywall construction 

• For accommodating the control systems for concealed flushing valves 


• Pre-mounted water section 

• Prepared electrical connection 

• Protection cover, can be cut to length 


• Mounting box including filter, shut-off and regulating screw, bayonet 

connection for solenoid or pneumatic valve 

• Protection cover 

• Protective cap 

• Sleeve 

• Water connection nipple 



115.801.00.1 

Housing for urinal electronic/pneumatic, with shut-off 

valve 


14 8 

R 1 /2 

14 

14 

8 5 

6 8 

4 

0-8 

14


Flush control Urinal electronic exposed 

Urinal electronic exposed 

Urinal electronic exposed 

HyTronic urinal electronic, water from back 

Ø 1 6 


• For flushing urinals with water inlet from above 

• For concealed water supply connection from the rear 

• For replacing manual surface-mounted urinal flushing valves 









Temperature range during operation 1 - 40 °C 

Temperature range during operation 34 - 104 °F 








Temperature range during storage -4 - +158 °F 


Operating temperature water max. 86 °F 

Battery type 9 V block battery (6CR61) 


• Housing for fittings 



•Battery 9V 

• Wall connection flange R 1/2" 

•Rosette 

• Chromium-plated flush pipe 

• Sleeve 




8 

6 7 

11 9 

7 

5-15 


R 1 /2" 

5 2 

8 7 

HyTronic urinal electronic, water from top 

Ø 1 6 


• For flushing urinals with water inlet from above 

• For water supply connection from above 

• For replacing manual surface-mounted urinal flushing valves 









Temperature range during operation 1 - 40 °C 

Temperature range during operation 34 - 104 °F 








Temperature range during storage -4 - +158 °F 


Operating temperature water max. 86 °F 

Battery type 9 V block battery (6CR61) 


• Housing for fittings 

• Connection pipe 1/2" 


•Battery 9V 

• Chromium-plated flush pipe 

• Wall connection flange R 1/2" 

• Wall fixture 

• Sleeve 




8 

6 7 

11 9 

7 

5-15 

5 2 

8 7


Accessories Flush control 

Accessories 

Accessories for urinal electronic/pneumatic 

HyTronic Clean-Handy 


• For deactivation of infrared-controlled Geberit flushing valves and flush 

actuators for sanitary cleaning 


• Remote control 


• Concise instructions 



115.831.00.1 Clean-Handy for urinal Electronic 

HyTronic service handy 


• For setting and enquiry of setting values of various electronic Geberit 

products such as lavatory taps, WC flush actuators, urinal controls 

and sanitary flushings 


• 4-line display 

• Menu guidance 

• Saving and transfer of settings to other control units of the same type 

• Compatible with existing control units 

• Data transmission with infrared light 



•Pouch 

• 3 Batteries Typ AAA 1,5 V 



115.860.00.1 Service Handy for all Electronics 

Flush pipe exposed for urinal top inlet 



[mm] 

Flush pipe for urinal, dia. 32 mm x 32 mm 



Flush pipe for urinal, PE-Gun metal 


Article no. dØ G A X L Colour 

[mm] [''] [cm] [cm] [cm] 

119.703.16.1 32 1 6,5 40 4 black 


G 

[''] 

Colour 

119.688.21.1 19 1 bright chrome-plated 



[mm] 

7 6 

G 

9 4 

A 

[cm] 

X 

[cm] 

L 

[cm] 

Colour 

119.704.16.1 32 7,5 40 6 black 

X 

X 

d 

L 

A 

d 

d 

L 

A 

d 

G 

25


Flush actuators Manual WC control 

Flush Manual actuators WC control 

Manual WC control 

HyTronic electronic WC-remote control, 230 V AC 


• For manual and remote control flush actuation of Geberit concealed 

cistern Samba using external buttons 

• For concealed cistern 109.300.00.5 / 110.340.00.5 / 110.350.00.5 / 

111.300.00.5 / 111.385.00.5 / 111.390.00.5 / 461.311.00.5 

• Not suitable for concealed cistern Twinline and Artline with top/front 

actuation and for 109.765.00.1 / 109.766.00.1 / 111.769.00.1 


• Flush actuation connected by wire 

• Geberit covers and flush-stop actuator plates can be mounted 

• Dual flush remote control flush actuation using external buttons 

• Flush actuation using actuator plate 

• Buttons can be connected in parallel 

• Self-calibrating electrical lifting device 

• Operation with extra-low voltage – no mains voltage in the cistern 

• Plug connection with cross-polarity protection 




Default hygienic flush time 168 h 


• Electrical lifting device for flush actuator 

• Connection cable, 2 m, prefabricated 

• Electrical control 

• Excluded: Power supply unit 

• Excluded: Button 




115.862.00.1 HyTronic electronic WC-remote control, 230V AC 


HyTronic WC-control for support hand rail, wired, 

230 V AC 



cistern Samba using support hand rail 


111.300.00.5 / 111.385.00.5 / 111.390.00.5 / 461.311.00.5 

• Not suitable for concealed cistern Twinline and Artline with top/front 

actuation and for 109.765.00.1 / 109.766.00.1 / 111.769.00.1 


• Flush actuation using support hand rail, connected by wire 


• Single flush can be triggered 


• Hygienic flush set 

• Buttons can be connected in parallel 


• Power supply unit, external 







• Stainless steel actuator plate Mambo 


•Fixation frame 

• 2 wire, length 1.2 m, prefabricated 



• Excluded: Controlbox for electronic 



115.863.00.1 HyTronic WC-control for support hand rail, 230V AG


Manual WC control Flush actuators 

HyTronic radio WC-control for support hand rail 


• For barrier-free construction 


cistern UP300 using support hand rail 


111.300.00.5 / 111.385.00.5 / 111.390.00.5 / 461.311.00.5 

• Not suitable for Geberit concealed cistern Twinline and Geberit 

concealed cistern Artline with top/front actuation and 109.765.00.1 / 

109.766.00.1 / 111.769.00.1 





• Flush actuation using support hand rail, wireless, radio 


• Easy installation and servicing 




• Not compatible with Geberit Service Handy and Geberit Clean Handy 




Frequency 50 Hz 





• Control system with radio receiver 

• Fixation frame 



•Actuator lever 





115.867.00.1 

HyTronic radio WC-control for support hand rail, 

230V, Mambo 

HyTronic, radio WC-control for support hand rail, 

battery operated 


• For barrier-free construction 




cistern Samba using support hand rail 


111.300.00.5 / 111.385.00.5 / 111.390.00.5 / 461.311.00.5 



109.766.00.1 / 111.769.00.1 


• Flush actuation using support hand rail, wireless, radio 






• Compatible with Geberit Service Handy 

• Not compatible with Geberit Clean Handy 


• Battery in closed case inside of the cistern 



Battery type LR20 






• Control system with radio receiver 

• Fixation frame 





• 2 batteries, each 1.5 V LR20 Alkaline 



115.869.00.1 HyTronic Flush actuators, radio/automatic/Battery DC 



Flush actuators Manual WC control 

HyTronic Flush actuators, radio/battery DC 


• For manual remote flush actuation of Geberit concealed cistern 

UP320 via Geberit RF-controlled button 


111.300.00.5 / 111.385.00.5 / 111.390.00.5 / 461.311.00.5 



109.766.00.1 / 111.769.00.1 


• Flush actuation using Geberit flush release button, wireless 


• Single flush with actuator plate 

• Dual flush with flush release button 








• Battery in closed case inside of the cistern 













• Excluded: HyTronic WC-remote flush relase 



115.898.00.1 HyTronic Flush actuators, radio/battery DC 


HyTronic Flush actuators, radio/230 V AC 








109.766.00.1 / 111.769.00.1 


• Flush actuation using Geberit flush release button, wireless 


• Single flush with actuator plate 











Radio frequency 868.4 MHz 

Radio frequency distance 10 m 












• Excluded: HyTronic WC-remote flush relase 




115.897.00.1 HyTronic Flush actuators, radio/230V


Automatic WC control Flush actuators 

HyTronic WC-remote flush release button, 

RF-controlled 











• 2 Batteries Typ AAA 1.5 V 




241.568.00.1 

8 8 

HyTronic WC-remote flush release button, 

RFcontrolled 

8 8 

1 8 

Automatic WC control 

Automatic WC control 

HyTronic, touchless automatic WC flushing 

230 V, AC 


• For the public and semi-public domain 


111.300.00.5 / 111.385.00.5 / 111.390.00.5 / 461.311.00.5 

• For use with actuator plate Mambo IRBA 

• Not suitable for barrier-free and wheelchair-suitable construction 

• Not suitable for Geberit concealed cistern before end of 2001 

• Not suitable for Geberit concealed cistern Artline with top/front 

actuation and 109.765.00.1 / 109.766.00.1 / 111.769.00.1 



• Self-calibrating infrared control 


• Operation with servo motor 



• Low-noise lifting mechanism 


• Manual, touch free actuation 

• Manual flush actuation using actuator plate 

• Triggers full flush 

• Adjustable detection time 

• Initial flush can be set 

• Hygienic flush can be set 

• Flush actuator made of stainless steel 


• Flush actuation settings can be made and checked, using HyTronic 

Service Handy 


• Easy maintenance and cleaning 








Hygienic flush 1 - 168 h 



• Actuator plate Mambo IRBA, with infrared window 

• Fixation frame with pre-mounted infrared sensor and control system 

• Pre-mounted on support bloc servo motor and lifting device 








115.890.00.1 HyTronic, automatic WC flushing 230V, AC 



Flush actuators Accessories 

HyTronic, touchless automatic WC flushing battery 

operated 




111.300.00.5 / 111.385.00.5 / 111.390.00.5 / 461.311.00.5 

• For use with actuator plate Mambo IRBA 

• Not suitable for barrier-free and wheelchair-suitable construction 

• Not suitable for Geberit concealed cistern before end of 2001 

• Not suitable for Geberit concealed cistern Artline with top/front 

actuation and 109.765.00.1 / 109.766.00.1 / 111.769.00.1 





• Operation with servo motor 



• Low-noise lifting mechanism 


• Manual, touch free actuation 

• Manual flush actuation using actuator plate 

• Triggers full flush 

• Adjustable detection time 

• Initial flush can be set 

• Hygienic flush can be set 

• Flush actuator made of stainless steel 


• Flush actuation settings can be made and checked, using HyTronic 

Service Handy 


• Easy maintenance and cleaning 






Hygienic flush 1 - 168 h 



• Actuator plate Mambo IRBA, with infrared window 

• Plate with pre-mounted infrared sensor, control system and batterie 

support 

• Pre-mounted on support bloc servo motor and lifting device 








115.891.00.1 HyTronic, automatic WC flushing battery operated 


Accessories 

Accessories for WC control 

Rough-in set for button for HyTronic 


• For installation preparation of a remote control flush actuator 

connected by wire for Geberit concealed cistern Samba 

• For solid and drywall construction 

• For cable connection of concealed box up to concealed cistern 

• For HyTronic electronic WC-remote, 230V, AC, 115.862.00.1 


• Concealed box drill size dia. 68 mm 

• Conduit pipe, length 1.7 m 



241.155.00.1 Rough-in set for button for HyTronic 

Rough-in set for handicapped handle wired for 

HyTronic 


• For installation preparation of a remote control flush actuator 

connected by wire for Geberit concealed cistern Samba 

• For solid and drywall construction 

• For cable connection of concealed box up to concealed cistern 

• For HyTronic WC-control for support hand rail, wired 230 V, AC, 

115.863.00.1 



• Conduit pipe, lenght 80 cm 



241.154.00.1 

Rough-in set for handicapped handle wired for 

HyTronic


Hand operated pneumatic flush actuator Flush actuators 

HyTronic, controlbox for electronic WC flush control 

0008 

NA4V1_V0.1 

20.6.02 



• For preparing the mains connection of WC control systems 


• Transforming the mains voltage to extra-low voltage 4.1 V DC 




Frequency 50 - 60 Hz 




• Cover for concealed outlet 


• Pipe sleeve 

7 7 



115.861.00.1 HyTronic, controlbox for electronic WC flush control 

7 7 

Hand operated pneumatic flush actuator 

Hand operated pneumatic flush actuator 

HyTouch pneumatic flush actuator concealed, single 

flush, square 


• For pneumatic remote control flush actuation of Geberit surfacemounted 

and concealed cisterns, exept 109.765.00.1, with a dual 

flush unit (with or without closing weight) 

• For conventional installation in brick-walls 

• For drywall construction 

• For GIS preWall system 




•Square design 




• Conduit pipe, 1.7 m 

• Pneumatic hose, 2 m 

• Concealed housing 

• Pneumatic flushing device 








10 8 

10 8 

6 3 

8 

3 7


Flush actuators Hand operated pneumatic flush actuator 

HyTouch pneumatic flush actuator, single flush, 

round 








• For installation in furniture 


• Round design 








115.114.97.1 bronze antique 

HyTouch pneumatic flush actuator concealed, dual 

flush, square 


6 









3 


• Square design 


• Conduit pipe, 1.7 m 


• Concealed housing 








52 

10 8 

6 

4 3 

1 7 -2 5 

10 8 

6 2 


8 

3 7 

HyTouch pneumatic flush actuator for furniture, dual 

flush, square 








• Square design 









HyTouch WC flush actuator, manual/pneumatic, dual 

flush on furniture 





• For pneumatic remote control flush actuation of low height concealed 

cisterns of Geberit 












10 8 


10 8 

8 9 

8 

8 

3 7 

M64x2 

min. 1 5 - max. 1 8


Foot operated pneumatic flush actuator Flush actuators 

HyTouch pneumatic flush actuator for institutions 









• For institutes 









Foot operated pneumatic flush actuator 

Foot-operated pneumatic flush actuator 

HyTouch pneumatic flush actuator wall mounted, 

foot-operated 












• Conduit pipe, 3 m 

• Pneumatic hose, 3.5 m 



11 

37 



115.918.00.1 

HyTouch pneumatic flush actuator wall mounted, footoperated, 

stainless steel 

6-27 

15 4 

7 8 

8 

Installation set for conduit pipe 


• For fastening the conduit pipe 

• For wall-mounted foot pushbutton electric and pneumatic 

• For public area 


• Adjustable from 8 - 12 cm 


• Conduit pipe, 2 m 

• Conduit pipe holder 




115.483.00.1 Fixation for conduit pipe pneumatic foot pedal 


9 

12 

5 4 

8-12


Taps HyTronic60 IR Electronic taps 


HyTronic60 IR Electronic taps 

HyTronic60 IR Electronic tap for washbasin, with 

lever, with internal mixer, with power supply, 

230 V AC 

19 3 



• For cold and hot water connection 

• For installation in washbasin or counter top 


• Cleaning agent proof 

• Temperature can be manually adjusted 

• Automatic triggering 


• Electrical power supply via power supply unit plug 


• Setting and interrogation option with HyTronic Service Handy 


Temperature during operation max. short time max. 90 °C 


Activation distance factory setting 22 cm 



Differentiated pressure CW/WW max. 1.5 bar 







Flow rate 6 l/min 


• Power supply unit plug 


• 2 non-return valves 3/8" 

•2 filters 

• Complete tap 





36 

2 2 

5 6 

3 5 

G 3/8 

12 2 

0 5 -3 

SW36 

SW19 


13 5 


lever, with internal mixer, with battery 6 V DC 










• Electrical power supply from battery 





19 3 












Battery type CR - P2 (6 V) 


•6 V battery 



•2 filters 



12 2 




36 

2 2 

5 6 

3 5 

G 3/8 

0 5 -3 

SW36 

SW19 

13 5


HyTronic60 IR Electronic taps Taps 


internal mixer, without mixer lever, with power 

supply, 230 V AC 












• Temperature can be preset during installation 


19 3 


















•2 filters 






36 

2 2 

5 6 

3 5 

G 3/8 

12 2 

0 5 -3 

SW36 

SW19 

13 5 


internal mixer, without mixer lever, with battery 

6 V DC 












• Temperature can be preset during installation 



19 3 

















•2 filters 






36 


2 2 

5 6 

3 5 

G 3/8 

12 2 

0 5 -3 

SW36 

SW19 

13 5



HyTronic60 IR Electronic tap for washbasin, cold/ 

mixed water, with battery 6 V DC 




• For cold or mixed water connection 









19 3 

Operating temperature mixed water 

max. 

max. 45 °C 













• Metal-reinforced hose R 3/8" 

•Filter 

• Complete faucet 


12 2 

0 5 -3 




36 

2 2 

5 6 

3 5 

G 3/8 

SW36 

SW19 

13 5 


HyTronic60 IR Electronic tap for washbasin, cold/ 

mixed water, with power supply, 230 V AC 













19 3 

Operating temperature mixed water max. max. 45 °C 















•Filter 

• Complete faucet 





36 

2 2 

5 6 

3 5 

G 3/8 

12 2 

0 5 -3 

SW36 

SW19 

13 5


HyTronic8X Automatic taps Taps 

Mains adapter for HyTronic60 



242.035.00.1 Mains adapter for HyTronic60 

Power supply unit plug 230V for HyTronic60 



242.033.00.1 Power supply adapter HyTronic60 EURO 230V/9DC 

HyTronic8X Automatic taps 

HyTronic8X Automatic taps 

HyTronic85 automatic tap IR/mains, hot/cold water, 

with adjustment lever 

Ø 27-38 



• To rinse washbasins 



• Temperature adjustment via the mixer lever on the side 

• Proportion of hot water can be limited 



• Hygienic flush adjustable 


• Volume flow control with aerator 

• Can be changed from mains operation to battery operation 

• Water saving mode can be set 

• Various functions can be set manually 




Activation distance factory setting 16 - 18 cm 


Flow rate > 0.1 l/s 


Pressure range during operation 0.5 - 8 bar 








• 2 non-return valves 

•2 filters 

• Key for aerator 

• 1.5 m connection cable 






25° 

13 


16 5 

448 14 

Ø 64 

11 5 

3/8" 

2-38


Taps HyTronic8X Automatic taps 

HyTronic85 automatic tap IR/battery, hot/cold water, 


















• Battery is sufficient to activate the water flow 200,000 times 


• Energy saving mode can be set 


16 5 

448 14 

Ø 27-38 

Ø 64 














•2 filters 




11 5 

3/8" 




25° 

13 

2-38 



without adjustment lever 

16 5 

Ø 27-38 

448 14 






• Temperature pre-setting via the internal mixer 

























•2 filters 








Ø 64 

11 5 

3/8" 

25° 

13 

2-38
























16 5 

448 14 

Ø 27-38 

Ø 64 














•2 filters 




11 5 

3/8" 




25° 

13 

2-38 



12 

Ø 27-38 
































•2 filters 









44 8 

14 

Ø 64 

13 

3/8" 

25° 

2-38 

10

























12 

Ø 27-38 

44 8 














•2 filters 







14 

Ø 64 

13 

3/8" 

25° 

2-38 

10 




















12 

Ø 27-38 

44 8 















•2 filters 








14 

Ø 64 

13 

3/8" 

25° 

2-38 

10
























12 

Ø 27-38 

44 8 














•2 filters 







14 

Ø 64 

13 

3/8" 

25° 

2-38 

10 

HyTronic87 automatic tap IR/mains, cold/mixed 

water 






• For use in the hygiene area 

• For use in the industrial area 

• For use in the Geberit GIS and Duofix system 

• For wet installation 


• Temperature is not adjustable 








• Matches the HansaVarox concealed base unit 

• Compatible with the MeplaFix water supply connection 



Product material 

Brass/Zinc diecasting chromeplated 












•Non-return valve 

•Filter 









13 

13 

R 1 /2 

16 5 

1 5 

25° 

25° 

14 

5 5



HyTronic88 automatic tap IR/mains, cold/mixed 

water 











• Temperature is not adjustable 

























•Non-return valve 

•Filter 








13 

13 

R 1 /2 


25° 

1 5 

21 5 

19 

25° 

5 5 


























13 

R 1 /2 
















•2 filters 





13 




R 1 /2 

16 5 

1 5 

25° 

25° 

14 

5 5




























13 

R 1 /2 


Brass/Zinc diecasting 

chrome-plated 






Temperature during operation max. 

short time 

max. 90 °C 








•2 filters 





13 




R 1 /2 

25° 

1 5 

21 5 

19 

25° 

5 5 













• Temperature adjustment via the mixer lever 













13 



chrome-plated 








short time 

max. 90 °C 







•2 filters 









R 1 /2 

13 

R 1 /2 

16 5 

1 5 

25° 

25° 

14 

5 5















• Temperature adjustment via the mixer lever 













13 

R 1 /2 



chrome-plated 








short time 

max. 90 °C 







•2 filters 





13 




R 1 /2 

Power supply unit, concealed 


25° 

1 5 

21 5 

19 

25° 

5 5 



• For power supply of HyTronic85-88 outlet taps 


• Power supply of up to 8 taps 

• Transformation of mains voltage to extra-low voltage 









• Cover for concealed outlet 




241.631.00.1 Power supply unit, concealed 

HyTronic87 / 88, concealed base unit MeplaFix 

HansaVarox Rough-In Kit 


• MeplaFix system elbow made from dezincification-resistant brass 


• 2 MeplaFix system elbows, pre-mounted 

• 1 MeplaFix system elbow, loose, with seal 

•Rubber collar 

• Fastening ring 

R 

7 7 

Z Z 

H H 

L 


Article no. R D D1 H L L1 l Z 

[''] [cm] [cm] [cm] [cm] [cm] [cm] [cm] 

616.030.00.1 MF 1/2 10,4 11 7 14 11 2 5,5 

7 7 

R 

l 

L1 

D 

D1


HyTouch26 self-closing taps Taps 

HyTouch26 self-closing taps 

HyTouch26 self-closing taps 

HyTouch26 self-closing tap, without mixer 

14 

38 

21 51 G 3/8 






• Self-closing 

• Jet regulator with flow limitation 

• Setting the flow duration irrespective of the water pressure 







Flow time range 3 - 30 s 

Default flow time 8 s 



Operating temperature mixed water max. max. 45 °C 



•Filter 



12 

05-3 SW25 

SW19 




4 7 

HyTouch26 self-closing tap, with mechanical mixer 

14 

34 






• Self-closing 


• Jet regulator with flow limitation 

• Setting the flow duration irrespective of the water pressure 







Flow time range 3 - 30 s 

Default flow time 8 s 








•2 filters 







2 2 

5 1 

3 4 

12 

0 5 -3 

SW19 

RV 

G 3/8 

4 7





HyTec Urinal partition wall glass, oval 

50 



115.210.CD.1 light grey RAL 7035 

115.210.GT.1 light green RAL 6027 

HyTec Urinal partition wall glass, square 

50 

95-105 



115.214.CD.1 light grey RAL 7035 

115.214.GT.1 light green RAL 6027 

0 

95-105 

0 

52 5 

49 6 

93 

80 


0 8 

4 

0 8 

4 

7 5 

35 

7 5 

7 5 

35 

7 5 

HyBasic Urinal partition wall UT60, 740 x 440 mm 


• For separating urinals in a large-scale installation 


• Plastic urinal partition with concealed fastening 




92-98 






Note 

Other colours on request! 

0 

44 

74 

9 6 

16

Traps 

Traps for bathtub 

Traps for shower base 

Traps for kitchen sink 

Description 

• Uniflex push control Page 116 

• Pop-up assembly Page 117 

• Uniflex pop-up assembly Page 120 

• Uniflex bathtub trap with plug/chain Page 119 

• Uniflex shower base traps Page 122 

• Drain cover Page 124 

• Uniflex shower channel Page 126 

• Space saving models Page 128 

• Standard models Page 130 

• Waste coupling Page 131 

Traps for washbasin Page 135 

Traps for washing machines • Traps for washing machine and dishwasher Page 137 

Traps for urinal and bidet 

• Traps for urinal Page 141 

• Trap for bidet Page 142 

Traps for oriental WC Page 134 

Special traps 

Connections 

Accessories 

• Traps in HDPE Page 131 

• Dilution traps Page 132 

• Traps for service sink Page 138 

• Funnel Page 142 

• Connections for WC Page 132 

• Outlet connection Page 143 

• For bathtub Page 121 

• Adapter and rosettes Page 143 

• Drain valve Page 145 

• Rubber seal, screw threaded covers Page 146 


Traps 

Traps for bathtub Uniflex PushControl 

Traps Uniflex for PushControl bathtub 

Uniflex PushControl 

Uniflex PushControl bathtub drain 


• For bathtubs with valve hole ø 52 mm 

• For bathtubs in standard size 


• Connection to the drainage pipe with PE outlet bend ø 40 / 50 mm, 

can be plugged or welded 

• Drain valve made from stainless steel 

• Bathtub drain with pushbutton actuation virtually flush with the tub 

• Construction height trap 90 mm 

• Odour trap 270° swivelling 


Drainage capacity 1 l/s 

Trap height 50 mm 


• Drain valve 

•Odour trap 

• Outlet bend 

•Overflow 

• Cable actuator 

• Ready-to-fit set 

145 4 -26 

5 







14 

40 

18-28 

50 

23-46 

59 89 


Uniflex PushControl bathtub drain, long 



• For installation in bathtubs with special lengths 












• Drain valve 

•Odour trap 


•Overflow 



24-50 







4 5 

14 

40 

18-28 

50 

23-46 

59 89

Traps 

Pop-up assembly Traps for bathtub 

Uniflex PushControl bathtub drain, high 



• For installation in bathtubs with special heights 












•Drain valve 

•Odour trap 

•Outlet bend 

•Overflow 



4 15-28 

5 







Pop-up plug for 150.755./150.756./150.757 







14 

40 

18-28 

50 

44-60 

59 89 

Pop-up assembly 

Pop-up assembly 

Pop-up assembly with outlet bend, 

ready-to-fit set 


• For bath and shower trays made from cast-iron, steel and plastic in 

standard size 

• For bathtubs and shower trays with valve hole ø 52 mm 


• Without contraflow principle 

• Bathtub drain and overflow assembly 

•Odour trap 

• Pop-up operation 

• Outlet connection can be rotated as needed 


Drainage capacity 0.85 l/s 

Overflow capacity 0.6 l/s 



• Outlet valve, stainless steel 

• Odour trap, 360° swivelling 

• Cable actuator, stainless steel 

• Outlet bend, HDPE, dia. 40/50 mm, rotating 

•Overflow 

• Seals 







3 5 

11-23 

9 2 

12 

40 

16-30 

50 

4 

16 5 -39 

12

Traps 

Traps for bathtub Pop-up assembly 

Pop-up assembly with ready-to-fit set, 

extra long 


• For bathtubs made from cast-iron, steel and plastic in special size 




• Bathtub drain and overflow assembly 

•Odour trap 



• Overflow pipes can be extended 

• T-piece for boiler connection 









• Overflow, extended 

• T-piece 







11-70 

Turn handle and Uniflex pop-up for bathtub trap 

150.520/150.525 


• For Uniflex bathtubs with outlet and overflow 


• Actuator rosette 

• Valve cone 







1" 

3 5 

9 2 


12 

40 

16-30 

50 

4 

16 5 -58 

12 

Pop-up assembly with inlet, with ready-to-fit set 





• Bathtub drain, overflow and inlet set 

•Odour trap 



• Direction of inlet jet flexible 

• Water supply connection elbow can be rotated 

• Water supply connection elbow suitable for Mepla pipes 




Inlet capacity 21 l/min 


Line noise at 3 bar 15 dB(A) 


4 2 

11-23 

16 5 -39 






•Overflow 

• Water inlet made of plastic, adjustable 

• Water supply connection bracket, 90°, 3/4" male thread, Euro cone 

ø 20 mm, rotating 


• Excluded: Backflow preventer 




9 2 

12 

40 

16-30 

50 

4 

12

Traps 

Pop-up assembly Traps for bathtub and accessories 

Pop-up assembly with inlet, with ready-to-fit set, 

extra long 

1" 

4 2 



• For bathtubs made from cast-iron, steel and plastic in special size 


• Bathtub drain, overflow and inlet set 

•Odour trap 



• Direction of inlet jet flexible 

• Water supply connection elbow can be rotated 

• Water supply connection elbow suitable for Mepla pipes 


• Overflow pipe extended 

• T-piece for boiler connection 



Inlet capacity 21 l/min 


Line noise at 3 bar 15 dB(A) 








• T-piece 

• Water inlet made of plastic, adjustable 

• Water supply connection bracket, 90°, 3/4" male thread, Euro cone 

ø 20 mm, rotating 


• Excluded: Backflow preventer 




11-70 

9 2 

12 

40 

16-30 

50 

4 

16 5 -58 

12 

Ready-to-fit set, for 150.710/150.711 


• For Uniflex bathtubs with inlet, outlet and overflow 


•Perlator 

•Cover 


• Valve cone 







Uniflex bathtub trap with plug/chain, standard model 


• For bath and shower trays made from cast-iron, steel and plastic in 

standard size 








• Seals 


•Chain 



150.017.00.1 

Traps for bathtub and accessories 

R 

F 

R ICHTER + FRENZEL 

Uniflex Bathtub trap with plug/chain, standard model, 

dia. 50mm 


3 5 

11-23 

9 2 

12 

40 

16-30 

50 

4 

16 5 -39 

12

Traps 

Traps for bathtub and accessories Compact trap, D90 

Compact trap, D90 

Compact trap, D90 

Uniflex pop-up assembly with outlet bend, D90 

24-38 

50 

17 5 -33 



• For bathtubs with drain hole ø 90 mm 

• For bathtubs with outlet and overflow 



•Overflow 




150.900.00.1 Uniflex Pop-up assembly with outlet bend, D90 

Uniflex pop-up assembly with outlet bend, extra long, 

D90 


• For standard and special size bathtubs 


• For bathtubs with outlet and overflow 





• T-piece 

3 5 

1 

19 5 

40 

3 5 

85 6 



150.901.00.1 

Uniflex Pop-up assembly with outlet bend, extra long, 

D90 

9 

17 5 -78 

24-38 

50 

16 5 -39 

19 5 

40 


9 

16 5 -58 

85 6 

Uniflex pop-up assembly with inlet, outlet bend 










•Overflow 


• Water outlet, adjustable 

• Water supply connection elbow, 3/4" male thread, Euro cone 

dia. 20 mm, turning 



150.910.00.1 Uniflex Pop-up assembly with inlet, outlet bend, D90 

Uniflex pop-up assembly with inlet, outlet bend, extra 

long 


• For standard and special size bathtubs 



4 2 

1 

24-38 

50 

4 2 

17 5 -33 

19 5 

40 

85 6 








• T-piece 

• Water outlet, adjustable 

• Water supply connection elbow, 3/4" male thread, Euro cone 

dia. 20 mm, turning 



Uniflex Pop-up assembly with inlet, outlet bend, extra 

150.911.00.1 

long, D90 

9 

17 5 -78 

24-38 

50 

19 5 

40 

9 

16 5 -39 

16 5 -58 

85 6

Traps 

Ready-to-fit set / Accessories Traps for bathtub and accessories 

Ready-to-fit set / Accessories 

Ready-to-fit set 

Ready to fit set for bathtub pop-up assemblies 

150.900/150.901 



•Outlet cover 







Ready-to-fit set, for Uniflex bathtubs with inlet, outlet 

and overflow 150.910/150.911 


•Perlator 

•Cover 


•Outlet cover 







Accessories 

Accessories 

Backflow preventer complete for Uniflex pop-up 

outlet, overflow and inlet assembly 


• For pop-up bath wastes and overflows with inlet, outlet and overflow 

• For on-site installation 


• Screw connection R 3/4" male 

• Flush insert 

• Wall socket 

• Extension 

• Protection cap 

• Excluded: Cover 



150.808.00.1 

Backflow preventer complete for Uniflex Pop-up 

outlet 

Cover for backflow preventer, chromium-plated 



150.809.21.1 Cover for backflow preventer, chromium-plated 

Metallic reinforced hose 3/4", length 80 cm, for 

Article 150.710/150.711/150.910/150.911 


• Unions, 3/4" 

• Seals 



150.991.00.1 Metallic reinforced hose 3/4", length 80cm 


19 

3/4" 

3/4" 

2 3 

3 5 -8 

1 5 

8

Traps 

Traps for shower base and drain cover Traps for shower base 

T-connection for drain pipe with 1" thread male 


• For connection to boiler 

• For bathtub drain assembly in standard size 


• Sealing cap 

• Seal 



150.245.06.1 granite grey 

Waste coupling for acrylic bathtubs 


• For acrylic bathtubs with overflow 


• Drain valve seat extension with O-ring 

•Banjo bolt 

• Adjusting screw 



150.247.00.1 Waste coupling for acrylic bathtubs 

1" 

2 7 

28 

28 

Traps for shower base and drain cover 

Traps for shower base 

Uniflex shower base trap 50 


• For shower trays with valve hole dia. 52 mm 

• For shower trays without overflow 




• Dip tube and dip tube support can be dismantled 

• Outlet pipe with ball joint can be rotated by 15° 



Drainage capacity 0,65 l/s 


•Odour trap 

• Screw connection ø 40 mm 

• Outlet pipe with ball joint 



Article no. Description dØ K 

[mm] [cm] 

150.680.00.1 Uniflex shower base trap 50 50 4,7 










4 7 

4 7 

d 

d 

K 

K 

13 8 

13 8 

0 3 -1 5 




•Odour trap 





Article no. Description dØ K 

[mm] [cm] 

150.685.00.1 Uniflex shower base trap 60 50 4,7 

8 5 

8 5 

47 

ø 58 

8 5 

8 5 

0 7 -2 6

Traps 

Traps for shower base Traps for shower base and drain cover 

Drain cover for Uniflex shower base trap 50, 

150.680.00.1 


• For shower outlet ø 50 mm 







Drain cover for Uniflex shower base trap 60, 

150.685.00.1 









Uniflex shower base trap in PP, for telescope drain 

cover 








• Outlet valve, plastic 

•Odour trap 


• Excluded: Telescopic outlet cover with overflow pipe 


06-25 75 11 

16-30 

50 

Article no. Description Rg 

[mm/in] 

150.113.00.1 

Uniflex shower base trap in PP, for 

telescope drain cover 

48 x 1/8 

12 

40 

6 5 

8 1 

7 

Rg 

48 

Shower base trap d 60, with outlet bend, overflow 

pipe 





• Compact design 


• Corrosion-resistant 

• Telescopic damming pipe to retain the water 




• Outlet valve, plastic 

•Odour trap 


• Telescopic damming pipe with cover 


Article no. Rg 

[mm/in] 

Colour 

150.621.21.1 60 x 1/8 bright chrome-plated 

Uniflex shower base waste coupling, with outlet bend 

6 







150.152.00.1 

Uniflex shower base waste coupling, with outlet bend, 

dia. 40mm 


7 5 

16-30 

ø50 

16-30 

3 4 

12 

ø40 

9 4 

8 

Rg 

60 

5 

9 

6 5 

40 

10 

11 

1 5 

0 6 -2 5

Traps 

Traps for shower base and drain cover Uniflex floor shower drain 








• Construction height 80 mm 



43 d 

Drainage capacity with 15 mm damming height 0.5 l/s 



•Odour trap 






K 

[mm] 

[cm] 

150.670.00.1 50 4,7 

Drain cover for Uniflex shower base trap 150.670.00.1 









K 

13 8 

9 2 

90 

02-1 8 

Uniflex floor shower drain 



Drain cover for Uniflex shower base trap 150.113.00.1 


• For shower tray with min. 120 mm tray depth 






15° 

23 5 

59 d 

28 8 


• For draining of a single floor even shower 

• For tiled showers 

• To be embedded in floor toping 

• For use within buildings 


•Outlet ø40 / 50mm 


• Minimal height 95 mm 

• Frame and grating out of stainless steel 

• Sealing collar, fleece-laminated 500 x 500 mm 

• Adjusting of grating in height, inclination and correction of 

misalignment possible 


Drainage capacity min. 0.45 l/s 

Drainage capacity max. 0.74 l/s 



•Odour trap 

• Outlet pipe with ball joint 50 mm 

• Funnel for floor toping 

•Frame and grating 

• Contact sheet 




K 

[mm] 

[cm] 

154.000.00.1 50 4,7 

K 

285 145 30 

10 

8 5 

1-11

Traps 

Uniflex floor shower drain Traps for shower base and drain cover 

Stainless steel design cover, square 


• For Uniflex floor shower drain 


• Without screw connection 




•Grating 



154.301.00.1 Stainless steel design cover, square 

Stainless steel design cover, round 








•Grating 



154.302.00.1 Stainless steel design cover, round 

Stainless steel design cover, trendy 








•Grating 



154.303.00.1 Stainless steel design cover, trendy 

Stainless steel design cover, classic 








•Grating 



154.304.00.1 Stainless steel design cover, classic 

Stainless steel design cover, puristic, square new 









154.305.00.1 Stainless steel design cover, puristic, square 


Traps 

Traps for shower base and drain cover Uniflex shower channel 

Stainless steel design cover, puristic, circle new 









154.306.00.1 Stainless steel design cover puristic circle 

Uniflex shower channel 

Uniflex shower channel 

Uniflex shower channel, room, outlet 50 new 



• For draining water from flat-bottom showers 


• For installing in the room centre 


• Minimal construction height 112 mm 

• Drain pipe and grating frame made of stainless steel 


• Insulation of material noise 

• Stress elimination to prevent cracking of ceramic plates 



• Outlet bend ø 50 mm 


15 6 

10-15 

14 




• 2 odour traps, incl. dip tube 


• Drain pipe with the installation flange for thin mortar installation 

• Frame of grating 


• 4 feet, incl. acoustic insulation elements 


•Adhesive 



Article no. l 

l1 

l2 

l3 

[cm] [cm] [cm] [cm] 

154.100.00.1 70 33 13,7 80 

154.101.00.1 80 38 18,7 90 

154.102.00.1 90 43 23,7 100 

154.103.00.1 100 48 28,7 110 

l1 

l 

14 

l3 

19 3 

50 

l2 


5 2 

1 2 -2 6 

Uniflex shower channel, wall, outlet 50 new 



• For draining water from flat-bottom showers 


• For wall mounting 


• Minimal construction height 112 mm 

• Drain pipe and grating frame made of stainless steel 


• Insulation of material noise 

• Stress elimination to prevent cracking of ceramic plates 



• Outlet bend ø 50 mm 


13 5 

3 

6 




• 2 odour traps, incl. dip tube 


• Drain pipe with the installation flange for thin mortar installation 

• Frame of grating 


• 4 feet, incl. acoustic insulation elements 

• Margin insulation tape for decoupling solid-borne sound 


•Adhesive 



Article no. l 

l1 

l2 

l3 

[cm] [cm] [cm] [cm] 

154.105.00.1 70 33 13,7 80 

154.106.00.1 80 38 18,7 90 

154.107.00.1 90 43 23,7 100 

154.108.00.1 100 48 28,7 110 

l1 

l 

14 

l3 

19 3 

50 

l2 

14 

6 

10-15 

5 2 

1 2 -2 6

Traps 

Uniflex shower channel Traps for shower base and drain cover 

Ready-to-fit set shower channel, stainless steel 

brushed new 


• For use with Uniflex shower channel 

• Design cover for Uniflex shower channel 


• Stainless steel, brushed 


•Design cover 

• 10 damping caps 

• Extraction tool 


Article no. Description L 

[cm] 

154.350.00.1 Line cover stainlees steel brushed 700 mm 70 



154.353.00.1 Line cover stainlees steel brushed 1000 m 100 

Ready-to-fit set shower channel, cover for 

flagstones new 




• Lid can be covered with ceramic plates 






Article no. Description L 

[cm] 

154.360.00.1 Frame and grating for tiles, 700 mm 70 




L 

6 

Ready-to-fit set shower channel, steel enamelled 

new 



• Design cover for Uniflex shower channel 


• Enamelled steel 






Article no. L 

[cm] 

Colour 

154.364.11.1 70 white alpine 

154.365.11.1 80 white alpine 

154.366.11.1 90 white alpine 

154.367.11.1 100 white alpine 

Ready-to-fit set shower channel, creative set 




• Production and care instructions for the manufacture of individual 

design covers 



• 10 damping caps (8.5 mm) 

• 10 damping caps (14.5 mm) 



154.299.00.1 Cover wood / plastic for shower gutter 

new 


L 

6

Traps 

Traps for sinks Traps for kitchen sink - space saving models 

Traps for sinks kitchen sink - space saving models 

Traps for kitchen sink - space saving models 

1 bowl connection, in PP, dia. 50 mm 

7-25 5 

12 


• For kitchen sinks with 1 bowl 


• Space-saving model 

• Supply bend plugged 

• With connection G 1 for washing machine or dishwasher 


• Supply bend with union nut 

• Blank cap for connection G 1 

• Angular hose connector dia. 19 mm and dia. 23 mm 




G 

Colour 

[mm] [''] 

152.819.11.1 50 1 1/2 white alpine 


9-30 

12 












G 

G 

9 5 -32 5 

8-32 5 



G 

Colour 

[mm] [''] 

152.885.11.1 40 1 1/2 white alpine 

8 

8 

19 

23 

19 

23 

8-23 

8-23 

d 

d 




• For kitchen sinks with 2 bowls 




• Pipe odour trap 









[mm] 

14-30 




9 5 -32 5 9 5 -32 5 

G G 

G 

[''] 

8-23 

19 

23 

d 

12-44 

Colour 

152.818.11.1 50 1 1/2 white alpine 













G 

Colour 

[mm] [''] 

152.886.11.1 40 1 1/2 white alpine 

12 

8-32 

G G 

5 8-325 12 

8 

8 

8-23 

19 

23 

d 

17-37

Traps 

Traps for kitchen sink - space saving models Traps for sinks 















Article no. dØ G 

[''] 

Colour 

152.820.11.1 50 1 1/2 white alpine 

Adapter in PP, with IT gasket 2"x1 1/2" 


• For connecting prefabricated drain assemblies 


• Seal 

12-30 

19 

23 

d 

14-44 

12-44 


Article no. G 

G1 

Colour 

[''] 

[''] 

213.906.11.1 2 1 1/2 white alpine 

G 

G 

G1 

9 8 

G 

5-325 95-325 12 

8 

8-23 

9 5 -32 5 

G 














[mm] 

Adapter in PP, with gasket 




• Seal 


Article no. G 

[''] 

Colour 

213.895.11.1 1 1/4 x 1 white alpine 

242.692.11.1 1 1/2 x 1 1/4 white alpine 


G 

8-32 8 

G 

5 8-325 G 

[''] 

8-23 

19 

23 

d 

Colour 

17-47 

17-37 

152.821.11.1 40 1 1/2 white alpine 

12 

8 

8-32 5 

G

Traps 

Traps for sinks Traps for kitchen sinks - standard models 

Traps for kitchen sinks - standard models 

Traps for kitchen sink - standard models 

1 bowl connection, in PP, dia. 40 or 50 mm 

9-19 

19 

23 





•Outlet vertical 








G 

Colour 

[mm] [''] 

152.550.11.1 50 1 1/2 white alpine 

152.556.11.1 40 1 1/2 white alpine 


19 

23 

9-19 

12 










G 



G 

Colour 

[mm] [''] 

152.711.11.1 50 1 1/2 white alpine 

152.713.11.1 40 1 1/2 white alpine 

8 

G 

8 

18-33 

15-30 

d 

8-25 

d 



9-19 

12 





• Outlet horizontal 








[mm] 




G 

[''] 

Colour 

152.715.11.1 50 1 1/2 white alpine 

152.717.11.1 40 1 1/2 white alpine 

9-19 

19 

23 

19 

23 











G 

Colour 

[mm] [''] 

152.553.11.1 50 1 1/2 white alpine 

152.559.11.1 40 1 1/2 white alpine 

G 

8 

8 

9-28 

15-30 

9-28 

G G 

18-33 

d 

G 

d 

8-25

Traps 

Waste coupling Traps in HDPE 

Waste coupling 

Waste coupling 

Waste and overflow coupling in PP 


• For kitchen sinks with overflow 


•Overflow 

•Plug 

•Chain 


Article no. Description Colour 

152.730.11.1 Waste and overflow coupling, 1 1/2" white alpine 

Waste coupling in PP, for kitchen sinks 


• For kitchen sinks 


• With overflow connection 


•Plug 

• Excluded: Overflow 

• Excluded: Chain 

10-17 

8 

G1 


Article no. G 

G1 

Colour 

[''] 

[''] 

152.731.11.1 1 1/2 1 white alpine 

G 

G 

Traps in HDPE 

Traps in HDPE 

S-trap HDPE 


• For connection to service sink 





[mm] 

P-trap HDPE 

a 






Article no. dØ d1Ø a h h1 L 

[mm] [mm] [cm] [cm] [cm] [cm] 

152.039.16.1 50 50 8 6,5 8 8 - 18 

152.043.16.1 50 56 8 6,5 8 8 - 21 

152.044.16.1 56 56 9 7 9 8 - 21 

Running trap, HDPE 

a 





h1 

H h 

d1Ø 

[mm] 

a 

[cm] 

a1 

[cm] 

H 

[cm] 

h 

[cm] 

152.038.16.1 50 50 8 8 8 - 18 6,5 8 

152.041.16.1 50 56 8 9 8 - 21 6,5 9 

152.042.16.1 56 56 9 9 8 - 21 7 9 

h1 

h 

h1 

[cm] 


Article no. dØ d1Ø a h h1 L 


152.040.16.1 50 50 8 6,5 8 20 - 30 

152.045.16.1 50 56 8 6,5 8 20 - 35 

152.046.16.1 56 56 9 7 9 25 - 38 


d 

a a1 

L 

d1 

d d1 

d d1 

h1 

h 

L

Traps 

Traps / Connections Dilution traps / Connections for WC 

Traps Dilution / Connections 

traps / Connections for WC 

Dilution traps 

Dilution trap, PP black, with adapter 

19 5 

1 1 /4" 

1 1 /2" 

12 2 


• For connection to laboratory sink 



152.090.16.1 

Dilution trap, PP black, with 

adapter 

black 

Glass receiver 0.6 l, for dilution trap 152.090 



152.095.00.1 Glass receiver 0.6 l, for dilution trap 152.090 

Glass receiver 2.3 l, for dilution trap 152.090 

9 1 

0,6 ltr. 

8 5 

9 1 

2,3 ltr. 

15 



152.096.00.1 Glass receiver 2.3 l, for dilution trap 152.090 

10 2 

4 4 

11 5 

20 3 

50 

7 

Connections for WC 

Connections for WC 

Connection for WC 



• For floor standing WC with outlet horizontal and open dia. 105 



[mm] 

Connection set for WC 


• For floor standing WC with outlet horizontal and open dia. 105 



• Connection piece 

• Fastening bracket 

H h 



[mm] 

152.647.00.1 Connection Set "Duo" for WC, dia. 110mm 110 

HDPE pipe, length 1m, dia 45mm 


• For extension of inlet sleeves 

H 

[cm] 

h 

[cm] 

Colour 

152.613.11.1 110 35 31 white alpine 

23 

3 5 

d 

9 

L (m) 

102±5 


Article no. dØ diØ s A L (m) Colour 

[mm] [mm] [mm] [cm²] [m] 

152.170.16.1 45 40 2,5 12,6 1 black 

35 

d 

05 4 

102±5 

d 

d 

di 

A 

cm 2 

s

Traps 

Connections for WC Traps / Connections 

Inlet set for wall-hung WC, dia. 45 mm with rubber 


• Seal 




152.434.16.1 45 18,5 16 black 

Inlet set for wall-hung WC, dia. 45 mm 

with rubber new 


• For connection to dia. 50 mm 


Product material PP 


• Seal 



[mm] 

L 

[cm] 

WC collar with seal ring 110 mm 

d 

d 


• For floor standing WC with outlet covered or open 

• For ring seal sockets dia. 110 mm 

l 

[cm] 

152.333.00.1 45 18,5 16 

H 

h 


Article no. dØ H h Colour 


152.402.16.1 110 18 14,5 black 

l 

L 

l 

L 

102±5 

d 

55 

50 

WC collar with rubber seal dia. 110 x 120 - 125 mm 


• For floor standing WC with outlet covered or open 

• For ground WC sleeves 



[mm] 

HDPE outlet connection set, length = 18 cm 


• For wall-hung WC 


• 2 cover caps 



L 

l 

[mm] 

[cm] 

[cm] 

152.420.46.1 110 18 14,5 

HDPE connection set, length = 18 cm 





d1Ø 

[mm] 

102±5 

H 

[cm] 

h 

[cm] 

Colour 

152.400.16.1 110 120 - 125 18 14,5 black 




152.487.46.1 90 18 14,5 matt chrome-plated 


H 

d 

d 

h 

l 

L 

l 

L 

d 

d1 

102±5 

102±5

Traps 

Traps / Connections Traps for oriental WC 

HDPE connection set, length = 26.5 cm 




•2 cover caps 


Article no. dØ d1Ø L L1 l l1 


152.438.46.1 90 45 26,5 26,5 22 24 

HDPE connection set, length = 18.5 cm 






Article no. dØ d1Ø L L1 l l1 


152.404.46.1 90 45 18,5 18,5 14,5 16 

HDPE outlet connection set, length=18.5 cm 





d1 

d 

L1 

l1 

l 

L 

L1 

l1 

d1 55 

d 

d1 

d 

l 

L 

l1 

L 

l 

L 


Article no. dØ d1Ø L l l1 

[mm] [mm] [cm] [cm] [cm] 

152.426.46.1 90 45 18,5 14,5 16 

152.422.46.1 110 45 18,5 14,5 16 

152.439.46.1 110 45 30 26,5 27,5 

55 

102–5 

55 

102±5 

102±5 

Traps for oriental WC 

Traps for oriental WC 


P-trap in PE, for oriental WC, with outlet horizontal 


• For oriental WC 




• Connection sleeve 



[mm] 

Colour 

167.733.16.1 110 black 

S-trap in PE, for oriental WC, with outlet vertical 

30 


• For oriental WC 

30 

100-120 

4 

d 

12 12 

27-37 




• Connection sleeve 



Colour 

[mm] 

167.734.16.1 110 black 

6 

6 

d 

24-42 

100-120 

4 

d 

d 

12 12 

24-42 

19 5 

19 5 

7 5 

7 5 

27-37

Traps 

Traps for washbasin Traps for washbasin 

HDPE connection set with offset, length = 18 cm 




• Offset 2.5 cm 





[mm] 

Traps for washbasin 

Trap white alpine 


• For washbasin 


•Odour trap 

• Inlet pipe with union nut 

•Rosette 

• Outlet pipe with rosette 

• Seals 

d1Ø 

[mm] 

405.116.00.1 90 45 

405.012.00.1 new 110 45 

Traps for washbasin 

6-22 

11 

d1 

d 

G 

135 21 

2 14 5 



G Colour 

[mm] [''] 

151.034.11.1 32 1 1/4 white alpine 

151.035.11.1 40 1 1/4 white alpine 

14 5 

1 

12 

13 

18 

M 12 

7 5 -30 

2 5 

2 5 

d 

Trap bright chrome-plated 

6-22 

11 




•Odour trap 

• Inlet pipe with union nut 

• Outlet pipe with rosette 

• Seals 



[mm] 

Trap inlet, waste coupling cover, d 32 mm 





Trap outlet, wall rosette, d 32 mm 





Trap outlet, wall rosette, d 40 mm 






G 

G 

[''] 

7 5 -30 

Colour 

151.034.21.1 32 1 1/4 bright chrome-plated 


d

Traps 

Traps for washbasin Traps for washbasin 

Trap outlet, extension pipe with O-ring 



[mm] 

Colour 

241.408.11.1 new 32 white alpine 

241.408.21.1 new 32 bright chrome-plated 

241.502.11.1 40 white alpine 

241.502.21.1 40 bright chrome-plated 

Tubular trap, in PP 





•Rosette 



G 

Colour 

[mm] [''] 

151.100.11.1 40 1 1/4 white alpine 

Tubular trap, in PP connection bend 


• For built-in washbasins with 1 bowl 



•Rosette 

4-17 

12 

8-27 

12 

G 



G 

Colour 

[mm] [''] 

151.107.11.1 40 1 1/2 x 1 1/4 white alpine 

8 

27 

G 

15-30 

9-28 

d 

d 

8 

15-30 


d 

Odour trap, U-shaped, outlet d 40, with seal new 


•For bidet 




• Chrome-plated 


Product material ABS 




• Connection pipe with female thread 


•Rosette 

• Seals 



G 

Colour 

[mm] [''] 


In-wall trap for washbasins with connection thread 

8 

4 5 

73 d1 

0-14 



• For covered installation 

• For washbasins with overflow 

• For hospital washbasins 

1 

30 

G 

G 

6 

13-36 

32 32 29 3 9 

165 236 

d 

9 


Article no. dØ d1Ø G Colour 

[mm] [mm] [''] 

151.120.11.1 50 - 56 32 1 1/4 white alpine 

151.120.21.1 50 - 56 32 1 1/4 bright chrome-plated 

151.121.00.1 50 - 56 32 1 1/4 stainless steel 

11 8 

50 

56 

3 

3 

14 8 

18 5

Traps 

Traps for washing machines and dishwashers Traps for washing machines and dishwashers 

Traps for washing machines and dishwashers 

Traps for washing machines and dishwashers 

Wall mounted/In-wall trap, PP 

30 5 




• For connecting a washing machine or dishwasher 


•Odour trap 

• Cover housing, white, 10.5 x 29.5 cm 


• Angular hose connector dia. 10 mm 


• Seals 




[mm] 

Colour 

152.768.11.1 40 white alpine 

In-wall trap, with box, for washing machine or 

dishwasher, cover stainless steel 

32 32 29 23 6 

_ _ _ 





10 

19 

23 


• Concealed trap 

•Housing 



• Seals 



11 8 

50 

29 5 



[mm] 

152.232.00.1 

In-wall trap, for washing machine or 

dishwasher, cover stainless steel 

50 - 56 

23 

19 

56 

10 5 

14 8 

14 9 

d 

8 

4 5 

25 

3 

6 

4 

1 5 

In-wall trap, for washing machine or dishwasher 







• Wall rosette 

• Thread protection 



[mm] 

Colour 


Concealed trap, with rosette for washing machine, 

with outlet seal 







• Wall rosette 

• Seal 

• Thread protection 


Article no. dØ d1Ø Colour 

[mm] [mm] 

152.235.11.1 40 56 white alpine 

152.235.21.1 40 56 bright chrome-plated 


22 

22 

10 

d 

9 2 

10 

d 

d1 

9 2 

1 8 1 7 

d 

3-9 

1” 

1 8 1 7 

d 

d1 

3-9 

1” 

4 

4 

23 

19 

23 

19

Traps 

Traps for service sink Traps for service sink 

Extension pipe for 152.234./152.235. 


• For extension of concealed trap 


• Seal 



152.921.11.1 Extension pipe white alpine 

Trap for washing machine, in PP 




• Connection pipe 


•Rosette 

• Seal 



[mm] 

Colour 

152.702.11.1 50 white alpine 

152.704.11.1 40 white alpine 

Traps for service sink 

G1" G1" 

6-23 

12 

7 

9 

3 17 8 

15-30 

d 

38 




Trap in PP, with connection nut for cast iron and steel 






•Rosette 



[mm] 

Trap in PP, white alpine, with funnel 


• For safety overflows 

4-23 

12 



• Funnel for several overflows 


•Rosette 

• Seals 

G 

[''] 

15-30 



[mm] 

Colour 

152.392.11.1 40 white alpine 

152.393.11.1 50 white alpine 

Colour 

152.741.11.1 50 1 1/2 white alpine 

152.742.11.1 40 1 1/2 white alpine 

13-21 

12 

17 

G 

8 

8 

15-30 

d 

d

Traps 

Traps for service sink Traps for service sink 

Oval funnel for labarotory 


•Sieve 



[mm] 

Funnel oval, with integrated trap new 


• For safety overflows 


•Trapped 

• Trap insert can be removed without tools 




352.354.16.1 black 

H 

B H h h1 L K 

[cm] [cm] [cm] [cm] [cm] [cm] 

Colour 

152.378.11.1 40 9,5 27 8 3,5 17,5 10 white alpine 

352.379.16.1 50 9,5 28 8 3,5 17,5 10,5 black 

18 7 

K 

6 




d 

Ø 5 6 

h1 

h 

9 6 

16 2 

17 4 

L 

9 6 

B 

8 4 

Trap in PP, lockable 


•Lockable 


• Connection pipe with female thread G 1 1/2" 

• Reduction ring G 1 1/2" x 1 1/4" 


•Shut-off valve 

•Rosette 

• Seals 



[mm] 

Floor drain HDPE new 


• For horizontal floor waste drainage 




388.001.00.1 Floor drain HDPE 75 

17 

12 


G/G1 

8 

G 

[''] 

15-30 

G1 

[''] 

Colour 

152.860.11.1 40 1 1/2 1 1/4 white alpine 

152.861.11.1 50 1 1/2 1 1/4 white alpine 

12 6 

Ø13 

Ø10 4 

Product material HDPE 

Drainage capacity min. 1 l/s 


19 6 

d 

3 3 

11 4 

8 5 

19 8 

196 Ø5 

Ø75 20

Traps 

Traps for urinal and bidet Traps for urinal 

Traps for urinal and bidet 

Traps for urinal 

Urinal P-trap 


• For connection to urinal or sink 


• Seal 

•Rosette 



[mm] 

Colour 

152.607.11.1 40 white alpine 

152.701.11.1 50 white alpine 

Concealed siphonic urinal trap, horizontal 

17 


• For connection to urinal 

• For urinal with outlet to rear 

• For urinal from 1 l flushing volume 


• Outlet pipe horizontal 



[mm] 

152.983.00.1 

Concealed siphonic urinal trap, 

horizontal, dia. 50mm 

50 

Concealed siphonic urinal trap, vertical 


• For connection to urinal d 




• Outlet pipe vertical 

12-23 

12 

50 

10 

10 

8 

15-30 



[mm] 

152.984.00.1 

Concealed siphonic urinal trap, vertical, 

dia. 50mm 

50 

6 

37 5 

d 


d 

2 

4 

5-10 35 14 

50 

8 

4 3 5 

6 

50 

8 

23 

Concealed siphonic urinal trap, vertical 








•Housing 

• Recess block made of polystyrene 

• Outlet bend rotating 

• Seals 



[mm] 

Colour 

152.627.16.1 50 black 

Urinal connection bend, white 



• For ceramic outlet dia. 50 mm 


• Seal 



[mm] 

Colour 

152.231.11.1 50 white alpine 

Connection bend for urinal trap 




3 

11 

50 

50 

14 

10 

75 305 13 

4 3 

6-25 

19 

25 

d 

50 

55 25-75 

d 

50

Traps 

Inlet for urinal Traps for urinal and bidet 

Concealed siphonic urinal trap, horizontal, for 

ceramic Taro Nova 



• For urinal with outlet vertical 



• Outlet pipe horizontal 


• Seals 


• Cover caps 



[mm] 

Colour 

152.942.11.1 50 white alpine 

Concealed siphonic urinal trap, vertical, for ceramic 

Taro Nova 



• For urinal with outlet vertical 





• Seals 

• Cover caps 



[mm] 

Colour 

152.941.11.1 50 white alpine 

12 

7 5 

5 5 

7 5 

17 5 

17 5 

d 

d 

6-25 

15-22 

10 5 

10 5 

50 

50 

3 

3 

12 5 

30-45 

Inlet for urinal 

Inlet for urinal 

PE inlet set for urinal 




• Seal 



[mm] 

Inlet set for urinal "Taro" 


Article no. G 

[''] 

Colour 


PE outlet set for urinal 



• For connection piece dia. 50 



diØ 

[mm] 

Colour 

152.489.16.1 32 35 black 

G 

d di 

15 2 5 

8 2 6-9 



[mm] 

Colour 

152.608.46.1 50 matt chrome-plated 


d 

13 5 

16 5 

50 ±2

Traps 

Funnel Trap for bidet / Funnel 

Trap for bidet / Funnel 

Trap for bidet 

Trap for bidet 


• For bidet 





G Colour 

[mm] [''] 

151.108.11.1 40 1 1/4 white alpine 


Trap for bidet, dia. 1 1/4" x 32mm 


• For bidet 



0-14 

0-14 

G 

6 

13-36 

d 

9 



G Colour 

[mm] [''] 

151.113.11.1 32 1 1/4 white alpine 

G 

6 

13-26 

d 

9 


Funnel 

Funnel 

Round funnel for laboratory, in PP 


•Round edge 

• Round thread 60 x 1/8" 


•Sieve 



[mm] 

Colour 

352.390.08.1 50 pebble grey RAL 7032 

Laboratory square waste, in PP, with strainer 


• Square 14.5 x 14.5 cm 


•Sieve 

• Excluded: Fixing brackets 



[mm] 

Colour 


Laboratory rectangular waste, with strainer 

34 

24 

10 

34 

10 


• Rectangular 295 x 145 mm 


•Sieve 

• Excluded: Fixing brackets 

10 



[mm] 

Colour 


10 

8 

d 

14 5 

d 

d 

29 5 

14 5 

14 5

Traps 

Outlet connection / Adapter and rosettes Accessories for sinks and traps 

Accessories Outlet connection for sinks / Adapter and traps and rosettes 

Outlet connection 

Straight outlet connection in PP, with compression 

nut 


Article no. dØ L K Colour 


152.160.11.1 50 25 22 white alpine 

152.161.11.1 50 50 47 white alpine 

152.164.11.1 40 25 22 white alpine 

152.165.11.1 40 50 47 white alpine 

Outlet connection in PP, with bend, 22.5°, with 

compression nut 


Angle 22.5° 



[mm] 

Outlet connection in PP, with bend, 45°, with 




arc X1 

[cm] 

X2 

[cm] 

K 

[cm] 

Colour 

152.221.11.1 40 22,5° 21,5 0,8 19 white alpine 

152.224.11.1 50 22,5° 21,5 0,8 19 white alpine 

Angle 45° 


[mm] 

X2 

X1 

X2 

X1 

X1 

[cm] 

K 

L 

d 

d 

X2 

[cm] 

K 

[cm] 

Colour 

152.222.11.1 40 22,5 1,7 19 white alpine 

152.225.11.1 50 22,5 1,7 19 white alpine 

K 

d 

K 

Outlet connection in PP, with bend, 90°, with 



Angle 90° 



[mm] 

Washing machine drain fitting kit, in PP 



• Union nut 

• Seal 


Article no. dØ G H h K Colour 

[mm] [''] [cm] [cm] [cm] 

152.274.11.1 40 1 15 12 6 white alpine 

Adapter and rosettes 

Double hose adapter, in PP, for kitchen trap 


• Backflow preventer 

A 

[cm] 

a 

[cm] 

H 

[cm] 

K 

[cm] 


Article no. G 

a 

Colour 

[''] 

[cm] 

152.767.11.1 1 8,3 white alpine 

Colour 

152.223.11.1 40 6 3 25 19 white alpine 

152.226.11.1 50 7,2 3,5 25 19 white alpine 

19 

23 

Adapter and rosettes 


2 

2 

H K 

K 

G 

a 

A 

a 

G 

d 

h 

19 

23 

H

Traps 

Accessories for sinks and traps Adapter and rosettes 

Hose adapter in PP 



242.691.11.1 Hose adapter in PP for traps white alpine 

Adapter in PP, with gasket 


• Seal 


Article no. G 

[''] 

Colour 

213.895.11.1 1 1/4 x 1 white alpine 

242.692.11.1 1 1/2 x 1 1/4 white alpine 

Adapter in PP, with IT gasket 2"x1 1/2" 

G1 




• Seal 

2 

2 


Article no. G 

G1 

Colour 

[''] 

[''] 

213.906.11.1 2 1 1/2 white alpine 

Rubber collar for traps 

di 

G 

45 

19 

23 


Article no. Description dØ diØ 

[mm] [mm] 







d 

Rubber collar 



[mm] 

Blind rosette, in PP 


• For closing outlet connections 



Article no. dØ D H h Colour 

[mm] [cm] [cm] [cm] 

242.437.11.1 32 8,5 8 4,5 white alpine 

Rosette, in PP 

d1Ø 

[mm] 


Article no. dØ H D Colour 


854.187.11.1 40 1,5 8,5 white alpine 

854.188.11.1 50 1,5 8,5 white alpine 


d 

L 

[cm] 

Colour 

152.495.00.1 32 46 2,3 black 

152.496.00.1 40 46 2,3 black 

153.564.16.1 32 58 2,3 black 

153.565.16.1 40 58 2,3 black 

153.566.16.1 50 58 2,3 black 

H 

h 




854.804.11.1 40 8,5 3,5 white alpine 

854.909.11.1 50 8,5 3,5 white alpine 

894.094.11.1 50 9 7 white alpine 

892.928.11.1 32 8,5 3,5 white alpine 

L 

H 

D 

d 

D d 

H 

d1 

D d

Traps 

Drain valve Accessories for sinks and traps 

Drain valve 

Drain valve 

Waste fitting for stainless steel sinks 


• For stainless steel sink 


• Conical edge 


• Counter nut 

• Seal 


Article no. Rg D H Colour 

[mm/in] [cm] [cm] 

352.328.08.1 60 x 1/8 7 8 pebble grey RAL 7032 

Drain valve, round 



D 

H 

[mm/in] [cm] 

[cm] 

862.640.00.1 60 x 1/8 7 2,9 

Waste fitting with cone, for earthenware sinks 


• For ceramic sink 


•Flat edge 


• Counter nut 

• Seal 

H 

H 

D 

Rg 


Article no. Rg D H Colour 

[mm/in] [cm] [cm] 

352.329.08.1 60 x 1/8 8,8 8 pebble grey RAL 7032 

D 

Rg 

Rubber seal 


Article no. Description diØ 

[mm] 

854.061.00.1 Rubber seal 60 

893.125.00.1 Rubber seal, dia. 60 mm 60 

Plug without chain 


• For outlet valve Rg 60 x 1/8" 



352.331.08.1 Plug without chain, grey pebble grey RAL 7032 

Cone for overflow pipe, in PP, for waste fitting 


• For outlet valve Rg 60 x 1/8" 


Article no. dØ d1Ø H Colour 

[mm] [mm] [cm] 

352.333.08.1 50 46 4,5 pebble grey RAL 7032 


2 

H 

di 

5 2 

4 6 

d 

d1

Traps 

Accessories for sinks and traps Accessories 

Accessories 

Accessories 

Screw-threaded cover, with seal and brass nipple 


• With union 


• With brass nipple 

• Seal 


Article no. dØ G 

H h 

[mm] [''] 

[cm] [cm] 

152.973.00.1 40 1/2 x 15 mm 9 6 

152.974.00.1 40 3/4 x 18 mm 9 6 

152.978.00.1 50 1 x 22 mm 9 6 

152.979.00.1 50 1/2 x 15 mm 9 6 

152.981.00.1 50 3/4 x 18 mm 9 6 

Cover for WC fixation nut 


•Washer 





PVC adapter socket reduced 


• For plugging in a PVC sleeve dia. 110 mm 

H 



d1Ø 

[mm] 

[mm] 

152.465.00.1 110 90 

h 

d 

7 

4 

G/ 

d 

d1 


Rubber seal for HDPE socket for floor mounted WC 



152.497.00.1 

Rubber collar for WC connector 



152.424.00.1 Rubber collar for WC connector, dia. 97-107 mm 

Inlet sieve and countersunk screw M6x50 



240.836.00.1 Inlet sieve and countersunk screw M6 x 50 

Adapter for earthenware sinks 

di 


• For connection from outlet valve to ceramic and fire clay sink 


• Seal 

Rubber seal for floor mounted WC, dia. 110 x 120- 

125 mm 

H 

D 


Article no. diØ D H Colour 


352.343.08.1 60 8,5 2,5 pebble grey RAL 7032

Traps 

Accessories for funnel Accessories for sinks and traps 

Adapter for stainless steel sinks 

d 


• For connection from outlet valve to stainless steel sink 


• Excluded: Seal 



[mm] 

Threaded pipe end 


• Seal 


Article no. dØ Rg H Colour 

[mm] [mm/in] [cm] 

152.174.16.1 40 60 x 1/8 3 black 

152.178.16.1 50 60 x 1/8 3 black 

HDPE adapter with nut and seal 

d 


Article no. dØ G H Colour 

[mm] [''] [cm] 

152.175.16.1 40 1 1/4 4,5 black 

152.176.16.1 40 1 1/2 3,5 black 

152.177.16.1 40 2 3 black 

152.179.16.1 50 1 1/4 3,3 black 

152.180.16.1 50 1 1/2 3,3 black 

152.181.16.1 50 2 3 black 

152.184.16.1 32 1 1/4 2 black 

Back nut, in HDPE 

diØ 

[mm] 

D 

[cm] 

H 

[cm] 



[mm/in] 

Colour 

352.317.16.1 60 x 1/8 black 

H 

Colour 

352.342.08.1 74 60 8,4 5,5 pebble grey RAL 7032 

H 

H 

Rg 

D 

di 

Rg 

G 

d 

Accessories for funnel 

Accessories for funnel 

Fixing brackets 


• 6 fastening brackets, stainless steel, adjustable 

• Screws 



352.368.00.1 Fixing brackets for rectangular waste 352.389 

Grating with 5 holes 


• With 5 holes dia. 12 mm 



352.332.08.1 pebble grey RAL 7032 


1 8 

4 5

Traps 

Accessories for sinks and traps Accessories for funnel 


Appendix 

International sales and delivery conditions Page 150 

Index Page 153 


Appendix 

International sales and delivery conditions 



(valid from 1st of April 2009) 

1. General 

1.1 All sales, deliveries and services of the Geberit International Sales 

AG (hereinafter referred to as "Geberit") are effected exclusively on 

the basis of the following International Sales and Delivery 

Conditions. General terms and conditions of the buyer are hereby 

contradicted. They are also not accepted in case Geberit does not 

expressly contradict them again after their receipt. These 

International Sales and Delivery Conditions are considered to have 

been accepted by the buyer at the latest with the acceptance of 

the delivered goods. 

1.2 All contracts, orders and agreements - particularly those 

purporting to change the conditions set out herein - shall only 

become binding if expressly accepted by Geberit in writing. 

2. Conclusion of contract - Written form 

2.1 The offers of Geberit are non-binding, unless otherwise agreed in 

writing. 

2.2 An order is only accepted by Geberit when it has been confirmed 

in writing and the order confirmation has been sent to the buyer. 

2.3 All agreements, declarations and other information are required to 

be in writing if they are to be valid 

3. Conditions of delivery - Transfer of Risks 

3.1 The delivery of goods shall be made "Free Carrier" Geberit's 

respective work or warehouse (FCA - INCOTERMS 2000) unless 

otherwise agreed and stated on the order confirmation. 

3.2 Geberit's prices shall be understood as net prices without tax or 

customs duty. Any taxes, duties, charges, etc. imposed in 

connection with the sale, delivery, import or export of the goods 

must be borne by the buyer. 

3.3 The buyer shall be liable to provide Geberit in due time with all 

information necessary for Geberit to fulfil its obligations with 

respect to tax and customs duty. In particular the buyer shall be 

liable for providing Geberit with a qualified export documentation 

(e.g. original certificate of export) and/or its correct VAT ID- 

Number. In case the buyer does not fulfil his obligation to supply all 

necessary information to Geberit the buyer shall be liable for all 

claims and damages arising for Geberit out of this default of 

contract, in particular taxes (VAT, GST, sales tax or similar turnover 

dependent taxes), customs duty, interest, any administrative cost 

(e.g. legal and consulting expenses) and penalties. 

3.4 The risk of loss - including accidental loss - or accidental 

deterioration of the goods is transferred to the buyer when the 

goods are handed over to the commissioned freight-forwarder or 

carrier but no later than the time of leaving the respective work or 

warehouse of Geberit , unless otherwise provided for in the 

corresponding order confirmation. 

3.5 Delivery of goods notified as ready for dispatch must be requested 

immediately, otherwise at its own discretion Geberit shall be 

entitled to store them at the expense and risk of the buyer and 

invoice them as delivered ex works. If despatch is delayed for 

reasons for which Geberit is not responsible, then instead of the 

point in time according to Section 3.3 the particular date of 

indication of readiness for despatch applies. 

3.6 Geberit may arrange, upon buyer's request, for insurance at 

buyer's cost against damage arising in connection with the 

storage, delivery or shipment of goods ordered by buyer. 

4. Delivery period, delays in delivery, partial delivery 

4.1 The stated delivery period is non-binding, unless it is specifically 

agreed in writing to be binding. 

4.2 The delivery period begins with the sending of the order 

confirmation to the buyer. It has been met when, by its expiry, the 

object of the delivery has left Geberit's particular works or the 

buyer has been informed of the order's readiness for dispatch. 


4.3 In the event of the occurrence of unforeseeable or inevitable events 

(force majeure) and in the case of operational stoppages of any 

kind, in particular damage to machinery, strikes and employment 

disputes, delayed supplies to us of important operating media and 

input materials or administrative measures, Geberit is entitled to 

withdraw from the contract of sale either wholly or in part or to 

extend the delivery period appropriately, taking into consideration 

a start-up period. Geberit shall inform the buyer about any such 

event in writing. 

4.4 In cases of delay of delivery the buyer can, following the abortive 

expiry of an appropriate final deadline, withdraw from the contract; 

in cases where the performance is impossible, he has this right 

even without the setting of a final deadline. All claims of the buyer 

for compensation for damages resulting from a delay of delivery, 

including but not limited to any consequential damages, are - with 

reservation of the regulation in the following section 4.5 - excluded; 

the same applies to the buyer's claim for the reimbursement of 

expenses. 

4.5 The exclusion of liability regulated in section 4.4 does not apply in 

the case of damages caused by wilful intent or gross negligence 

on Geberit's part. Subject to mandatory law in other cases 

Geberit's liability is limited to the contractually typical, foreseeable 

damages not exceeding the amount of the respective order. 

4.6 Unless otherwise agreed in writing, Geberit is entitled to make 

partial deliveries. 

5. Prices, payment, default 

5.1 Geberit's prices are based on the repective price lists valid at the 

date of the order confirmation. 

5.2 Unless other credit terms have been agreed between Geberit and 

the buyer, goods must be paid for immediately after the receipt of 

the order confirmation and before delivery. 

5.3 If any payment is overdue, interest on the outstanding sum is 

payable at commercial bank rates but not less than 6 percent p.a. 

5.4 Bills of exchange and cheques are accepted by Geberit only on 

account of performance and not as performance. Payments made 

by bills of exchange or cheques do not constitute fulfilment until 

the amount in question has been irrevocably credited to Geberit's 

bank account. Taxes and expenses for bills of exchange are borne 

exclusively by the buyer. 

5.5 In the case of buyer's payment default, insolvency or the debts 

being jeopardised through deterioration of the buyer's 

creditworthiness Geberit shall be entitled to demand immediate 

settlement of all debts falling due at the time and in the future or 

the provision of securities. Geberit shall also be entitled to only 

make outstanding deliveries if they are paid for in advance or 

sufficient securities are provided. If this cannot be established by 

buyer within a reasonable period of time, Geberit may withdraw 

from the contract of sale. 

6. Delay in calling goods 

If the specified quantities of goods ordered by buyer are not called 

for delivery within the agreed timeframe, Geberit is entitled to 

withdraw from the sale with immediate effect, and/or to adjust the 

prices accordingly. Buyer is prohibited from claiming any 

damages. 

7. Packaging 

Unless otherwise agreed the goods shall be delivered in standard 

packaging. The buyer will be charged for any special packaging 

agreed. 

8. Defective goods (Warranty) 

8.1 Buyer must inspect the goods immediately upon receipt. Any 

defects recognisable in the course of a customary examination 

must be notified to Geberit in writing within eight (8) days after 

receipt. Otherwise, the goods purchased are deemed to have 

been accepted and any defect claims against Geberit are 

excluded.

8.2 To the extent there are defects involved which were not 

recognisable in the course of a customary examination, written 

notification of such defects must be given immediately upon their 

discovery. Otherwise, the goods purchased are deemed to have 

been accepted with respect to such defects and any defect claims 

against Geberit are excluded. 

8.3 Buyer undertakes to make the defective goods or the defective 

part of the goods available to Geberit for a reasonable time 

immediately after discovery of the defect, in unaltered condition, so 

that the defect can be checked. This obligation does not however 

release the buyer from his burden of proof of the presence of a 

defect. 

8.4 Provided the goods, that have been professionally and duly stored, 

maintained and used by the buyer, are proven defective and buyer 

has notified the defects as set out hereinabove, Geberit at its own 

choice shall be entitled to subsequently fulfil its obligations by 

repairing the defective goods or by supplying replacements free of 

cost. Should one or both of these types of subsequent fulfilment 

be impossible or not reasonable, Geberit is entitled to decline 

them. Geberit can also decline subsequent fulfilment for as long as 

the buyer does not fulfil his payment obligations. 

8.5 Should the subsequent fulfilment according to section 8.4 be 

declined by Geberit or not have been successful, the buyer has the 

choice either of demanding a corresponding reduction of the 

purchase price (price reduction) or of withdrawing from the 

contract in accordance with the legal regulations (withdrawal). 

8.6 Defect claims are subject to a period of limitation of one (1) year 

after delivery of the goods to the buyer and no more than fifteen 

months after notification of readiness for dispatch. 

8.7 Defect claims are conditioned upon buyer's prior performance of 

any and all of buyer's own obligations. 

8.8 Any claims based on defects of the goods are subject to the 

limitations of liability named in section 9. 

8.9 The above provisions apply correspondingly if other goods or 

smaller quantities are delivered instead of those agreed. 

9. Liability of Geberit 

9.1 Unless otherwise specified, any claims of the buyer against Geberit 

for whatever legal reason, in particular claims arising from 

infringement of principal and subsidiary contractual obligations, the 

reimbursement of expenses or tort are excluded. The exclusion in 

particular includes claims for damages other than to the purchased 

goods, claims for loss of profit and claims which do not result from 

a defect of the delivered goods. 

9.2 The exclusion of liability in section 9.1 does not apply for damages 

resulting from culpable injury of life, body or health, from wilful 

intent or gross negligence. It also does not apply in cases where 

mandatory liability exists in accordance with product-liability laws 

for products supplied for private use. 

9.3 Subject to mandatory law in other cases as said in section 9.2 

Geberit's liability is limited to the contractually typical, foreseeable 

damages not exceeding the amount of the respective order. 

9.4 Insofar as liability is excluded or limited for Geberit, this also applies 

for its representatives, employees, subcontractors and commercial 

agents. 

10. Retention of title, securities 

10.1 Geberit shall retain ownership of the goods supplied until full 

payment of the corresponding purchase price and the fulfilment of 

all other outstanding debts owed by the buyer to Geberit has been 

effected (hereinafter "Retained Goods"). Buyer shall take all 

necessary measures for the protection of the ownership rights of 

Geberit. 

10.2 The buyer processes the Retained Goods for Geberit as 

manufacturer but without any obligation on the latter's part. The 

processed Goods are still deemed to be Retained Goods. 

Appendix 


10.3 Should the buyer process, combine and mix the Retained Goods 

with other goods Geberit shall become part owner of the new 

product in the proportion of the invoice value of the Retained 

Goods to the invoice value of the other goods used. Should 

Geberit's ownership cease as a result of combination or mixing the 

buyer hereby agrees to transfer its ownership of the new product 

in the amount of the invoice value of the Retained Goods to 

Geberit. Geberit's part ownership shall be deemed to be Retained 

Goods. 

10.4 The buyer is only entitled to resell the Retained Goods in the 

normal course of business and subject to his normal terms and 

conditions. 

10.5 At the time of the conclusion of the sales contract with Geberit, the 

buyer assigns to Geberit all claims which base / will base on the 

resale of the Retained Goods. The assigned claims shall be 

deemed to be security for the Retained Goods. The buyer shall not 

be entitled to otherwise assign the claims. Insofar as a continuous 

account relationship is agreed between the buyer and his 

customers, the assignment refers to the balance at the time. The 

buyer is still entitled to collect these resale claims from his 

customers or third parties after they have been assigned; Geberits' 

authority to collect the claims remains unaffected by this. Geberit is 

entitled to request that the buyer informs Geberit about the 

assigned claims and their debtors, gives Geberit all information in 

writing which is necessary for collection, surrenders to Geberit the 

relevant documents and informs the debtors in writing about the 

assignment of the claims. However, Geberit does not undertake to 

collect the claims or requests the abovementioned information as 

long as the cases specified in section 5.5 do not occur. 

10.6 In the cases specified in section 5.5 and if the buyer fails to meet 

the obligations of section 10.4. Geberit shall also be entitled to 

forbid the processing and the resale of the Retained Goods with 

immediate effect. A declaration of withdrawal from the contract by 

Geberit is also deemed to be a withdrawal of the authorisation to 

resell and to collect the resale claims. In these cases Geberit shall 

also be entitled to demand the immediate return of the Retained 

Goods at the expense of the buyer and with exclusion of a right of 

retention. In the abovementioned cases the buyer hereby 

authorises Geberit or its agent presenting written authorisation to 

enter its business premises on foot or in vehicles in order to 

repossess the Retained Goods. 

10.7 To the extent that retention of title cannot be agreed with the buyer 

in accordance with the applicable law, a lien on the goods and on 

the processed goods and on the purchase price claims of the 

buyer resulting from the resale of the goods shall be deemed to be 

agreed. A lien means that the goods serve as a security for Geberit 

until the purchase price is paid completely and that the buyer is 

therefore entitled to process or resell the goods only with the 

agreement of Geberit. 

10.8 If the value of the securities due to Geberit exceeds the claims to 

be secured by more than 20% Geberit is obliged, on request of the 

buyer, to release the securities of Geberit's choice which exceed 

the above-mentioned excess cover. 

11. Re-export 

11.1 Geberit explicitly draws attention to the fact that Geberit products 

are protected by various intellectual property rights in other 

countries. Buyer has therefore to seek advice from Geberit prior to 

planned exports. 

11.2 The onward delivery of the goods and any product documentation, 

including but not limited to the product descriptions and the 

installation guidelines, to the USA or Canada is expressly 

prohibited and requires the prior written permission of Geberit. 

12. Prohibition of assignment and offsetting 

12.1 The buyer shall only be entitled to assign rights and debts arising 

from contracts of sale to third parties with the prior agreement of 

Geberit. 


Appendix 


12.2 The buyer is not entitled to offset counter-claims against the 

purchase price claim, unless in the case of an undisputed or legally 

established claim. 

12.3 The buyer is not entitled to retain the purchase price on the basis 

of any counter-claims which do not result from the delivery 

contract concerned. 

13. Place of performance, jurisdiction and applicable law 

13.1 Place of performance for all obligations resulting from the sales 

contract shall be the principal place of business of Geberit in Jona, 

Switzerland. 

13.2 All disputes arising out of or in connection with any sales contract 

shall be resolved, to the exclusion of the ordinary courts, by an 

arbitral tribunal in accordance with the International Arbitration 

Rules of the Zurich Chamber of Commerce. The arbitration shall 

take place in Zurich; the language of the proceedings shall be 

English. 

13.3 The sales contract is subject to the laws of Switzerland. The 

application of the UN Convention for the International Sale of 

Goods ("Vienna Sales Convention") is expressly excluded. 

14. Guarantee 

14.1 In addition to the warranty of section 8, Geberit guarantees for the 

products and periods listed below, that the delivered goods are 

free from any material or production failures. 

Geberit concealed cisterns and mounting elements 10 Years 

Geberit traps, sinks, bathtub drain assemblies 10 Years 

Geberit exposed cisterns AP123 and AP128 10 Years 

Geberit exposed cisterns AP110, 113 and 117 5 Years 

Geberit flush mechanisms for concealed cisterns 5 Years 

Replacement fill- and flush mechanisms Impuls590, 

360, 380, 280 

5 Years 

Replacement fill- and flush mechanisms 

ImpulsBasic330, 340, 230 

2 Years 

Geberit pneumatic faucets 2 Years 

Pneumatic remote controls 5 Years 

Geberit AquaClean 2 Years 

Geberit flushing systems for WC and urinals 

(electronics) 

2 Years 

Geberit taps for washbasins (electronics) 2 Years 

14.2 The guarantee periods shall start from date of delivery to the buyer. 

If any material or production failures occur during the guarantee 

period Geberit will fulfil its guarantee obligations by repairing the 

defective goods or by supplying replacements free of cost. Any 

further claims against Geberit on the basis of this additional 

guarantee are expressly excluded, if possible according to the 

applicable law. 

By expiration of the guarantee period all guarantee claims, in 

particular claims concerning goods that have been repaired or 

replaced during the guarantee period, are excluded. 

14.3 The guarantee is only valid under the following conditions: 

• the installation follows the written rules of application technique 

as issued by Geberit; and 

• the goods have been correctly and professionally stored, 

installed, maintained and used; and 

• the goods have not been modified, in particular no parts have 

been removed, changed or added; and 

• the systems are built only with original parts of Geberit. 


15. Severability 

The invalidity or unenforceability of any provisions of the conditions 

above shall not affect the validity or enforceability of any other 

provision of these conditions. 

In such an event both parties commit themselves to compose a 

legally valid replacement rule which approaches the invalid 

provision as closely as possible within the economic interpretation 

of the conditions. This shall apply accordingly to any omissions in 

the conditions.

Article-No. Page 

109.130.00.1 7 

109.160.00.1 7 

109.201.00.1 6 

109.210.00.1 6 

109.300.00.5 4 

109.720.00.1 46 

109.721.00.1 46 

109.765.00.1 5 

109.766.00.1 5 

110.150.00.1 14 

110.170.00.1 13 

110.171.00.1 13 

110.251.00.1 12 

110.259.00.1 12 

110.340.00.5 10 

110.350.00.5 10 

110.765.00.1 11 

110.766.00.1 11 

111.240.00.1 21 

111.290.00.1 21 

111.300.00.5 20 

111.321.00.1 23 

111.385.00.5 22 

111.390.00.5 22 

111.434.00.1 27 

111.490.00.1 26 

111.493.00.1 25 

111.520.00.1 25 

111.524.00.1 24 

111.539.00.1 24 

111.616.00.1 27 

111.618.00.1 28 

111.686.00.1 28 

111.689.00.1 29 

111.769.00.1 20 

111.807.00.1 26 

111.813.00.1 30 

111.815.00.1 29 

111.835.00.1 30 

111.839.00.1 29 

111.847.00.1 31, 43 

111.867.00.1 30 

111.868.00.1 30 

111.869.00.1 30 

115.103.00.1 56 

115.114.11.1 100 

115.114.21.1 100 

115.114.97.1 100 

115.120.11.1 54 

115.120.21.1 54 

115.120.46.1 54 

115.125.11.1 54 

115.125.21.1 54 

115.125.46.1 54 

115.130.11.1 54 

115.130.21.1 54 


115.130.46.1 54 

115.135.11.1 54 

115.135.21.1 54 

115.135.46.1 54 

115.200.11.1 114 

115.200.CG.1 114 

115.200.EP.1 114 

115.210.CD.1 114 

115.210.GT.1 114 

115.214.CD.1 114 

115.214.GT.1 114 

115.228.10.1 53 

115.228.11.1 53 

115.228.21.1 53 

115.228.46.1 53 

115.228.CG.1 53 

115.228.DK.1 53 

115.228.DT.1 53 

115.228.DW.1 53 

115.228.EP.1 53 

115.228.FB.1 53 

115.228.FR.1 53 

115.228.GM.1 53 

115.228.KB.1 53 

115.258.00.1 53 

115.260.11.1 53 

115.260.21.1 53 

115.260.46.1 53 

115.260.HC.1 53 

115.438.00.1 63 

115.483.00.1 101 

115.680.11.1 56 

115.680.21.1 56 

115.720.21.1 113 

115.721.21.1 113 

115.722.21.1 102 

115.723.21.1 102 

115.724.21.1 103 

115.725.21.1 103 

115.732.21.1 104 

115.733.21.1 104 

115.750.10.1 51 

115.750.11.1 51 

115.750.21.1 51 

115.750.46.1 51 

115.750.CG.1 51 

115.750.DK.1 51 

115.750.DT.1 51 

115.750.DW.1 51 

115.750.EP.1 51 

115.750.FB.1 51 

115.750.FR.1 51 

115.750.GM.1 51 

115.750.KB.1 51 

115.751.00.1 52 

115.758.KH.1 51 


115.758.KJ.1 51 

115.758.KK.1 51 

115.758.KL.1 51 

115.758.KM.1 51 

115.758.KN.1 51 

115.760.11.1 52 

115.760.21.1 52 

115.760.45.1 52 

115.760.46.1 52 

115.760.DT.1 52 

115.760.GM.1 52 

115.760.HC.1 52 

115.760.KA.1 52 

115.765.11.1 55 

115.765.46.1 55 

115.770.10.1 50 

115.770.11.1 50 

115.770.21.1 50 

115.770.46.1 50 

115.770.CG.1 50 

115.770.DK.1 50 

115.770.DT.1 50 

115.770.DW.1 50 

115.770.EP.1 50 

115.770.FB.1 50 

115.770.FR.1 50 

115.770.GM.1 50 

115.770.KB.1 50 

115.777.10.1 50 

115.777.11.1 50 

115.777.21.1 50 

115.777.46.1 50 

115.777.CG.1 50 

115.777.DK.1 50 

115.777.DT.1 50 

115.777.DW.1 50 

115.777.EP.1 50 

115.777.FB.1 50 

115.777.FR.1 50 

115.777.GM.1 50 

115.777.KB.1 50 

115.778.KH.1 49 

115.778.KJ.1 49 

115.778.KK.1 49 

115.778.KL.1 49 

115.778.KM.1 49 

115.778.KN.1 49 

115.788.00.1 49 

115.788.11.1 49 

115.788.DW.1 49 

115.788.EP.1 49 

115.788.SC.1 49 

115.788.SD.1 49 

115.788.SE.1 49 

115.798.00.1 55 

115.801.00.1 91 

Index 


115.805.46.1 92 

115.806.46.1 92 

115.817.11.1 90 

115.817.46.1 90 

115.818.11.1 91 

115.818.46.1 91 

115.831.00.1 93 

115.860.00.1 93 

115.861.00.1 99 

115.862.00.1 94 

115.863.00.1 94 

115.867.00.1 95 

115.869.00.1 95 

115.890.00.1 97 

115.891.00.1 98 

115.897.00.1 96 

115.898.00.1 96 

115.918.00.1 101 

115.941.11.1 99 

115.941.KA.1 99 

115.942.11.1 100 

115.942.KA.1 100 

115.943.21.1 101 

115.944.11.1 100 

115.944.KA.1 100 

115.999.21.1 100 

116.001.00.1 89 

116.010.00.1 90 

116.011.11.1 86 

116.011.21.1 86 

116.011.46.1 86 

116.012.11.1 87 

116.012.21.1 87 

116.012.46.1 87 

116.013.FW.1 86 

116.014.11.1 87 

116.014.21.1 87 

116.014.46.1 87 

116.015.KH.1 88 

116.015.KJ.1 88 

116.015.KK.1 88 

116.015.KL.1 88 

116.015.KM.1 88 

116.015.KN.1 88 

116.016.00.1 89 

116.016.11.1 88 

116.016.DW.1 88 

116.016.EP.1 88 

116.016.SC.1 88 

116.016.SD.1 88 

116.016.SE.1 88 

116.021.11.1 81 

116.021.21.1 81 

116.021.46.1 81 

116.022.11.1 82 

116.022.21.1 82 


Index 


116.022.46.1 82 

116.023.FW.1 80 

116.024.11.1 83 

116.024.21.1 83 

116.024.46.1 83 

116.025.KH.1 84 

116.025.KJ.1 84 

116.025.KK.1 84 

116.025.KL.1 84 

116.025.KM.1 84 

116.025.KN.1 84 

116.026.GH.1 85 

116.031.11.1 81 

116.031.21.1 81 

116.031.46.1 81 

116.032.11.1 82 

116.032.21.1 82 

116.032.46.1 82 

116.033.FW.1 80 

116.034.11.1 83 

116.034.21.1 83 

116.034.46.1 83 

116.035.KH.1 84 

116.035.KJ.1 84 

116.035.KK.1 84 

116.035.KL.1 84 

116.035.KM.1 84 

116.035.KN.1 84 

116.036.GH.1 85 

116.107.21.1 109 

116.108.21.1 110 

116.115.21.1 106 

116.116.21.1 108 

116.117.21.1 110 

116.118.21.1 111 

116.125.21.1 105 

116.126.21.1 107 

116.127.21.1 111 

116.128.21.1 112 

116.215.21.1 107 

116.216.21.1 109 

116.225.21.1 106 

116.226.21.1 108 

118.026.11.1 8, 75 

118.026.21.1 8, 75 

118.100.11.1 76 

118.200.16.1 75 

118.221.11.1 8 

118.221.21.1 8 

119.060.11.1 75 

119.063.11.1 75 

119.502.11.1 74 

119.503.11.1 74 

119.504.11.1 74 

119.604.11.1 74 

119.610.11.1 76 


119.611.16.1 76 

119.626.11.1 76 

119.629.11.1 75 

119.668.00.1 77 

119.675.00.1 77 

119.688.21.1 93 

119.692.21.1 141 

119.696.11.1 77 

119.703.16.1 93 

119.704.16.1 93 

123.010.11.1 66 

123.135.11.1 66 

123.136.11.1 66 

123.700.11.1 67 

123.701.11.1 67 

128.300.11.1 67 

136.417.11.1 68 

136.532.11.1 68 

136.535.11.1 68 

136.603.11.1 68 

136.723.00.1 72 

136.724.00.1 72 

136.725.00.1 72 

136.726.00.1 72 

136.909.21.1 73 

146.110.10.1 60 

146.110.11.1 60 

146.110.CG.1 60 

146.110.EP.1 60 

146.120.10.1 61 

146.120.11.1 61 

146.120.CG.1 61 

146.120.EP.1 61 

146.130.11.1 61 

146.182.11.1 58 

148.050.00.1 62 

150.017.00.1 119 

150.113.00.1 123 

150.152.00.1 123 

150.221.11.1 118 

150.221.21.1 118 

150.221.45.1 118 

150.221.46.1 118 

150.245.06.1 122 

150.247.00.1 122 

150.256.11.1 124 

150.256.46.1 124 

150.275.11.1 124 

150.275.21.1 124 

150.275.45.1 124 

150.275.46.1 124 

150.280.11.1 123 

150.280.21.1 123 

150.280.45.1 123 

150.280.46.1 123 

150.285.11.1 123 


150.285.21.1 123 

150.285.45.1 123 

150.285.46.1 123 

150.425.11.1 119 

150.425.21.1 119 

150.425.45.1 119 

150.425.46.1 119 

150.520.21.1 117 

150.525.21.1 118 

150.621.21.1 123 

150.670.00.1 124 

150.680.00.1 122 

150.685.00.1 122 

150.710.21.1 118 

150.711.21.1 119 

150.755.11.1 116 

150.755.21.1 116 

150.755.45.1 116 

150.755.46.1 116 

150.756.11.1 116 

150.756.21.1 116 

150.756.45.1 116 

150.756.46.1 116 

150.757.11.1 117 

150.757.21.1 117 

150.757.45.1 117 

150.757.46.1 117 

150.808.00.1 121 

150.809.21.1 121 

150.900.00.1 120 

150.901.00.1 120 

150.910.00.1 120 

150.911.00.1 120 

150.920.11.1 121 

150.920.21.1 121 

150.920.45.1 121 

150.920.46.1 121 

150.930.11.1 121 

150.930.21.1 121 

150.930.45.1 121 

150.930.46.1 121 

150.991.00.1 121 

151.034.11.1 135 

151.034.21.1 135 

151.035.11.1 135 

151.035.21.1 135 

151.100.11.1 136 

151.105.21.1 136 

151.107.11.1 136 

151.108.11.1 142 

151.108.21.1 142 

151.113.11.1 142 

151.120.11.1 136 

151.120.21.1 136 

151.121.00.1 136 

152.038.16.1 131 



152.039.16.1 131 

152.040.16.1 131 

152.041.16.1 131 

152.042.16.1 131 

152.043.16.1 131 

152.044.16.1 131 

152.045.16.1 131 

152.046.16.1 131 

152.090.16.1 132 

152.095.00.1 132 

152.096.00.1 132 

152.160.11.1 143 

152.161.11.1 143 

152.164.11.1 143 

152.165.11.1 143 

152.170.16.1 132 

152.174.16.1 147 

152.175.16.1 147 

152.176.16.1 147 

152.177.16.1 147 

152.178.16.1 147 

152.179.16.1 147 

152.180.16.1 147 

152.181.16.1 147 

152.184.16.1 147 

152.221.11.1 143 

152.222.11.1 143 

152.223.11.1 143 

152.224.11.1 143 

152.225.11.1 143 

152.226.11.1 143 

152.231.11.1 140 

152.232.00.1 137 

152.234.21.1 137 

152.235.11.1 137 

152.235.21.1 137 

152.274.11.1 143 

152.333.00.1 133 

152.378.11.1 139 

152.392.11.1 138 

152.393.11.1 138 

152.400.16.1 133 

152.402.16.1 133 

152.404.46.1 134 

152.420.46.1 133 

152.422.46.1 134 

152.424.00.1 146 

152.426.46.1 134 

152.434.16.1 75, 133 

152.438.46.1 134 

152.439.46.1 134 

152.465.00.1 146 

152.487.46.1 133 

152.489.16.1 141 

152.495.00.1 144 

152.496.00.1 144


152.497.00.1 146 

152.550.11.1 130 

152.553.11.1 130 

152.556.11.1 130 

152.559.11.1 130 

152.607.11.1 140 

152.608.46.1 141 

152.613.11.1 132 

152.627.16.1 140 

152.647.00.1 132 

152.665.11.1 140 

152.682.00.1 31, 144 

152.689.00.1 31, 144 

152.690.00.1 31, 144 

152.691.00.1 31, 144 

152.692.00.1 31, 144 

152.693.00.1 31, 144 

152.701.11.1 140 

152.702.11.1 138 

152.704.11.1 138 

152.711.11.1 130 

152.713.11.1 130 

152.715.11.1 130 

152.717.11.1 130 

152.730.11.1 131 

152.731.11.1 131 

152.741.11.1 138 

152.742.11.1 138 

152.767.11.1 143 

152.768.11.1 137 

152.818.11.1 128 

152.819.11.1 128 

152.820.11.1 129 

152.821.11.1 129 

152.860.11.1 139 

152.861.11.1 139 

152.885.11.1 128 

152.886.11.1 128 

152.921.11.1 138 

152.941.11.1 141 

152.942.11.1 141 

152.973.00.1 146 

152.974.00.1 146 

152.978.00.1 146 

152.979.00.1 146 

152.981.00.1 146 

152.983.00.1 140 

152.984.00.1 140 

153.564.16.1 144 

153.565.16.1 144 

153.566.16.1 144 

154.000.00.1 124 

154.100.00.1 126 

154.101.00.1 126 

154.102.00.1 126 

154.103.00.1 126 


154.105.00.1 126 

154.106.00.1 126 

154.107.00.1 126 

154.108.00.1 126 

154.299.00.1 127 

154.301.00.1 125 

154.302.00.1 125 

154.303.00.1 125 

154.304.00.1 125 

154.305.00.1 125 

154.306.00.1 126 

154.350.00.1 127 

154.351.00.1 127 

154.352.00.1 127 

154.353.00.1 127 

154.360.00.1 127 

154.361.00.1 127 

154.362.00.1 127 

154.363.00.1 127 

154.364.11.1 127 

154.365.11.1 127 

154.366.11.1 127 

154.367.11.1 127 

156.050.00.1 17, 31, 44 

167.733.16.1 134 

167.734.16.1 134 

180.100.10.1 58 

180.100.11.1 58 

180.100.CG.1 58 

180.100.EP.1 58 

185.100.10.1 60 

185.100.11.1 60 

185.100.CG.1 60 

185.100.EP.1 60 

186.100.10.1 59 

186.100.11.1 59 

186.100.CG.1 59 

186.100.EP.1 59 

213.895.11.1 129, 144 

213.906.11.1 129, 144 

215.177.00.1 77 

217.713.11.1 146 

217.713.46.1 146 

238.192.00.2 73 

238.244.00.2 74 

240.017.00.1 73 

240.047.00.1 73 

240.058.00.1 55 

240.116.00.1 64 

240.166.00.1 74 

240.396.00.1 63 

240.495.00.1 63 

240.634.00.1 64 

240.635.00.1 64 

240.710.00.1 74 

240.711.00.1 73 


240.712.00.1 73 

240.836.00.1 146 

240.839.00.1 62 

240.938.00.1 55 

241.154.00.1 98 

241.155.00.1 98 

241.408.11.1 136 

241.408.21.1 136 

241.411.11.1 135 

241.411.21.1 135 

241.502.11.1 136 

241.502.21.1 136 

241.507.11.1 135 

241.507.21.1 135 

241.508.11.1 135 

241.508.21.1 135 

241.568.00.1 97 

241.586.00.1 64 

241.631.00.1 112 

241.716.11.1 117 

241.716.21.1 117 

241.716.45.1 117 

241.716.46.1 117 

242.001.00.1 17, 31, 43, 63 

242.010.00.1 62 

242.018.00.1 77 

242.033.00.1 105 

242.035.00.1 105 

242.048.00.1 29 

242.185.00.1 64 

242.437.11.1 144 

242.691.11.1 144 

242.692.11.1 129, 144 

249.801.00.1 63 

250.022.00.1 63 

250.028.00.1 62 

250.036.00.1 62 

281.004.00.1 70 

281.207.00.1 70 

281.208.00.1 71 

282.303.KD.1 71 

283.311.KD.1 69 

283.312.KD.1 69 

283.313.KD.1 69 

352.317.16.1 147 

352.328.08.1 145 

352.329.08.1 145 

352.331.08.1 145 

352.332.08.1 147 

352.333.08.1 145 

352.342.08.1 147 

352.343.08.1 146 

352.354.16.1 139 

352.368.00.1 147 

352.379.16.1 139 

352.388.08.1 142 

Index 


352.389.08.1 142 

352.390.08.1 142 

363.050.00.1 43 

364.052.00.1 43 

365.050.00.1 43 

366.050.00.1 43 

367.050.00.1 43 

388.001.00.1 139 

405.012.00.1 135 

405.116.00.1 135 

457.410.00.1 16 

457.608.00.1 16 

457.611.00.1 14 

457.686.00.1 15 

457.689.00.1 15 

457.872.26.1 17 

457.888.26.1 17 

457.893.00.1 16 

458.160.00.1 23 

461.000.25.1 34 

461.002.00.1 34 

461.003.00.1 34 

461.004.00.1 41 

461.006.00.1 41 

461.014.00.1 41 

461.015.00.1 40 

461.022.00.1 34 

461.025.00.1 39 

461.030.00.1 40 

461.031.00.1 40 

461.035.00.1 39 

461.036.00.1 40 

461.037.26.1 41 

461.038.00.1 38 

461.043.00.1 42 

461.044.00.1 42 

461.058.00.1 40 

461.064.00.1 42 

461.070.00.1 43 

461.072.00.1 38 

461.074.00.1 39 

461.089.00.1 42 

461.163.00.1 39 

461.178.00.1 38 

461.200.00.1 34 

461.206.00.1 36 

461.240.00.1 35 

461.311.00.5 35 

461.430.00.1 38 

461.530.00.1 37 

461.621.00.1 36 

461.660.00.1 41 

461.689.00.1 37 

464.015.00.1 40 

465.029.00.1 41 

611.297.00.1 31 


Index 


616.030.00.1 112 

854.061.00.1 145 

854.187.11.1 144 

854.188.11.1 144 

854.804.11.1 77, 144 

854.909.11.1 77, 144 

862.640.00.1 145 

892.928.11.1 77, 144 

893.125.00.1 145 

894.094.11.1 77, 144 


Notes 


Notes 


Notes 


Notes 


Subject to change without notice. The information in this document contains general description of the technical options available, which do not always have to be present 

in the individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. 

Geberit International Sales AG 

CH-8640 Rapperswil 

Switzerland 

sales@geberit.com 

00030-09/31 

www.international.geberit.com int.e

Geberit, 2009-2010.pdf

Create successful ePaper yourself

Delete template?

Save as template?