View Document Here - Hanford Site

05-ED-034 

Mr. Michael A. Wilson, Program Manager 

Nuclear Waste Program 

State of Washington 

Department of Ecology 

3100 Port of Benton Blvd 

Richland, Washington 99352 

Dear Mr. Wilson: 

D 

sre 

EDMC 

SUBMITTAL OF HANFORD FACILITY RESOURCE CONSERVATION AND RECOVERY 

ACT (RCRA) PERMIT MODIFICATION NOTIFICATION FORM 24590-WTP-PCN-ENV- 

04-0014 

Reference: WA7890008967, "Dangerous Waste Portion of the Hanford Facility Resource 

Conservation and Recovery Act Permit for the Treatment, Storage, and Disposal of 

Dangerous Waste, Chapter 10 and Attachment 51, `Waste Treatment and 

Immobilization Plant."' 

This letter transmits Hanford Facility RCRA permit modification notification form 24590-WTP- 

PCN-ENV-04-0014 (Attachment 1) for the State of Washington Department of Ecology 

(Ecology) review and approval. The form describes a requested Class 1 modification to the 

Reference. A Bechtel National, Inc. certification statement is provided in Attachment 2. 

The modification proposes to update select mechanical data sheets in Appendices 8.6, 9.6, 10.6, 

and 11.6 for the Pretreatment Facility, Low-Activity Waste Facility, High-Level Waste Facility, 

and the Laboratory, respectively, of the Reference. The data sheets have been updated to reflect 

minor design changes that have occurred since the data sheets were originally approved by 

Ecology. The design changes do not affect the form ; function, or fit of the plant items. 

This modification request was discussed in advance with your staff. If you have any questions, 

please contact me, or your staff may contact Woody Russell, Environmental Division, 

(509) 373-5227. 

Sincerely, 

-R J. Scll 

ED:RWR Manager 

Attachments: (2) 

cc: Seepage 2

Mr. Michael A. Wilson 

05-ED-034 

cc w/attachs: 

B. G. Erlandson, BNI 

J. P. Henschel, BNI 

R. E. Lawrence, BNI 

J. Markillie, BNI 

J. Cox, CTUIR 

S. Harris, CTUIR 

R. K. Biyani, Ecology 

K. Elsethagen, Ecology 

E. A. Fredenburg, Ecology 

T. Z. Gao, Ecology 

J. Hensley, Ecology 

S. A. Thompson, FHI 

G. Bohnee, NPT 

L. A. Huffinan, RL 

A. C. McKarns, RL 

R. Jim, YN 

Administrative Record 

Environmental Portal, LMSI 

cc w/o attachs: 

M. Anderson-Moore, Ecology 

L. Cusack, Ecology 

S. L. Dahl, Ecology 

G. P. Davis, Ecology 

J. Vann, Ecology 

K. Niles, Oregon Energy 

MAY 0 2 2005

Attachment 1 

05-ED-034 

Hanford Facility Resource Conservation and Recovery Act Permit 

Modification Notification Form 24590-WTP-PCN-ENV-04-0014

Page 1 of 3 

Qua rter Ending 6130/2005 24590-WTP-PCN-ENV-04-0014 

Index 

Hanford Facility RCRA Permit Modification Notification Form 

Part III, Chapter 10 and Attachment 51 

Waste Treatment and Immobilization Plant 

Page 2 - 3: Hanford Facility RCRA Permit, 111.6.A, Chapter 10 and A tt 

achment 51, Modifica tion to Update 

Mechanical Data Sheets in Attachment 51, Appendices 8.6, 9.6, 10.6, and 11.6 

Submi tt 

ed by Co-Operator. Review d by ORP Pro am Office:, 

^31 'z/ ,./rte 6;12 /v s^ 

F. Be nek DateR eWns Date 

24590-SENV-F00011 Rev 4 (7/20/2004) Ref: 24590-WTP-GPP-SE1NV-010

Quarter Ending 6/30/2005 

Hanford Facility RCRA Permit Modification Notification Form 

Page 2of3 

24590-W TP-P C N-ENV-04-0014 

Unit Permit Part &Chapter: 

Waste TreatmenItand Immobilization Plant Part III, Chapter 10 and Attachment 51 

The purpose of this permit modification is to transmit selected updated mechanical data sheets listed in the 

Hanford Facility RCRA Permit, Attachment 51, Appendices 8.6, 9.6, 10.6, and 11.6 for the Pretreatment 

Facility, Low-Activity Waste Facility, High-Level Waste Facility, and the Laboratory respectively. The data 

sheets (attached) have been updated to reflect minor design changes that have occurred since the data 

sheets were originally approved by the Washington State Department of Ecology. This design detail does 

not affect the form, ft or function of the plant items. 

Appendix 8.6 

Replace: 24590-PTF-MVD-PWD-P0001, Rev With: 24590-PTF-MVD-PWD-P0001, Rev 

Replace: 24590-PTF-MVD-PWD-P0002, Rev 1 With: 24590-PTF-MVD-PWD-P0002, Rev 2 

Replace: 24590-PTF-MVD-PWD-P0003, Rev 1 With: 24590-PTF-MVD-PWD-P0003, Rev 2 

Replace: 24590-PTF-MVD-UFP-P0002, Rev 0 With: 24590-PTF-MVD-UFP-P0002, Rev 1 

Replace: 24590-PTF-MVD-UFP-P0007, Rev 0 With: 24590-PTF-MVD-UFP-P0007, Rev 1 

Appendix 9.6 

Replace: 24590-LAW-MVD-LOP-P0004, Rev 0 With: 24590-LAW-MVD-LOP-P0004, Rev 1 

Replace: 245904 AW-MVD-LOP-P0005, Rev 0 With: 24590-LAW-MVD-LOP-P0005, Rev 1 

Replace: 24590-LAW-MVD-RLD-P0006, Rev 1 With: 24590-LAW-MVD-RLD-P0006, Rev 2 

Replace: 24590-LAW-MVD-LCP-P0004; Rev 0 With: 24590-LAW-MVD-LCP-P0004, Rev 1 

Replace: 24590-LAW-MVD-LCP-P0005, Rev 0 With: 24590-LAW-MVD-LCP-P0005, Rev 1 

Replace: 24590-LAW-MVD-LFP-P0007, Rev 0 With: 24590-LAW-MVD-LFP-P0007, Rev 1 




Appendix 10.6 

Replace: 24590-HLW-MVD-HOP-P0001, Rev 1 With: 24590-HLW-MVD-HOP-P0001, Rev 2 

Replace: 24590-HLW-MVD-HOP-P0012, Rev 0 With: 24590-HLW-MVD-HOP-P0012, Rev 1 

Replace: 24590-HLW-MED-HOP-P0012, Rev 0 With: 24590-HLW-MED-HOP-P0012, Rev 1 

Replace: 24590-HLW-MED-HOP-P0017, Rev 0 With: 24590-HLW-MED-HOP-P0017, Rev 1 

Replace: 24590-HLW-MAD-HOP-P0018 Rev 1 With: 24590-HLW-MAD-HOP-P0018 Rev 2 

Appendix 11.6 

Replace: I 24590-LAB-MVD-RLD-P0164, Rev 0 With: I 24590-LAB-MVD-RLD-P0164, Rev 1 

Replace'. 24590-LAB-MVD-RLD-P0165, Rev 0 With: 24590-LAB-MVD-RLD-P0165, Rev 1 

' Class I modifications requiring prior Agency approval. 

2 This is only an advanced notification of an intended Class' 1, 2, or 3 modification, this should be followed with a formal 

modification request, and consequently implement the required Public Involvement processeswheh required. 

24590-SENV-F00011 Rev 4 (7/20/2004) Ref: 24590-WTP-GPP-SENV-010

Qua rter Ending 6/30 12005 

Page 3 of 3 

24590-WTP-PCN-ENV-04-0014 

WAC 173-303-830 Modi fication Class:' 2 Class 1 Class "I Class 2 Class 3 

Please mark the Modi fication Class: 

X 

Enter Relevant WAC 173-303-830, Appendix I Modification citation number: 

Enter wording of WAC 173-303-830, Appendix I Modifica tion citation: N/A 

N/A 

In accordance with WAC 173-303-830(4)(d)( 1), this modification notification is requested to be reviewed and approved as 

a Class ' 1 modifica tion. WAC 173-303-830(4)(d)(i)(A) states, "Class 1 modi fications apply to minor changes that keep 

the permit current with routine changes to facility or its operation. These changes do not substan ti 

ally alter the permit 

conditions or reduce the capacity of the facility to protect human health or the environment. In the case of Class 1 

modifications, the director ma y require prior approval' 

Modification ,Approved: F^ 

Reason for denial: 

Yes ® No (state reason for denial) 

Reviewed 

by Ecology: 

S. Dahl Date 

24590-SENV-:F00011 Rev 4 (7/20/2004) ' Ref: 24590-WTP-GPP-SENV-010

MECHANICAL SYSTEMS DATA SHEET: VESSEL 

PLANT ITEM No. 

245904"x-MV PWD-VSL,00033 

ProjeG 

Project ND 

pr*dsm 

RPP-WiP 

24590 

mmward 

P&D 

Process CalalFa6on 

Vessel Drawing 

24590•P 6-PWD-P0002 

DE C7E0 

I 245904`71F-MV4 WD-P0001001 

Description ultimate OverRow Vessel 

Charge VwAls (rag Numbe rs) 

mararanc uara 

PWO-VSL.00131, PW6Y$L-0C1$2 

Pulaejet rsxars / Agitators (Tag 

Numbers) 

PM-PM-00031, 11 111VQPJM-00032, PWD-10JM-00033, P 11 111FD-PJM-00034, PWDAJM-00035, 

PW"illf-00036, PW6PJM-00037, PWD-PJM400035 

RFOW?umps (rag Num bers) PWD-RF400131,.PWZ4tFD-0*f32 

main. nn" 

Quality Leval 

Seismic Ca9egory 

ire ioe(Contents 

Deep specific Gravity 

OPereang Vduma gal 

QL-1 

8C./ 

Radfoaetive Mquildi.S7 

296580 

Fabrication Spew 

..Design Cone 

Code Stamp 

NO,Reglstrawn 

waves PS) 

24590.W7R3PS4RV00.7P001 

ASME Vf/f OlV i 

Yes 

Yes 

Emaly Lem 

Totelvakree gal 41,650 Es*naW fi5,400 503,7'60 465,000 

Envkenmental Qualffications NNt Amral' 129,000 517,300 499,400 

hLdde Diameter hrch 280. Winn Des ig 

n Not Requked 

targlhRlelght (T4TL). Inch 89 Sncw Design Not Requked 

vessel 

operallm 

Vessel 

Design 

Call6oeket 

" 

Saismk Design 245904VTP-3PS-SS90•70001 

34590-WTP-3 1sS4fVMTP082 

Intent Presama 

External P rncsum 

PSW O 

.0.22 

15 

FV 

MIA 

NIA 

, . Seismic Bess MDMW 

FG9;0 Heac 

Fero 

Treat 

Ten"MZ 

;s 

'F 

. 218 LQ, 22 !VIA Corrosion Nbwance 

Mot Roodi ed 

inch I 0.06 (Motes 7,S 

Min. DeslgD Metal Temp 'F 0 j HydrostaticTwtPressure P rig 1 19.5 

Note: Please note that: source, special nuclear and byp ro 

duct 

materials, as defined in the Atomic Energy Act of 1954 (AEA), 

are regulated at the U.S. Department of Energy (DOE) faatldes 

exckisively by DOE acting pursuant to Its AEA author it y. DOE 

asserts, that pursuant to the AEA, it has sole and exclusive 

responsibility and autho ri ty to regulate source, special nucle ar, 

and byproduct materials at DOE-owned nuclear fa cilities. 

Information Contained herein on radionu cl ides is provided for 

process description purposes only. 

2 3 ZM 05 Issued for Permitthm Use 

EXPIRES 12/101*& 

Thiq P"ind nncumpnt &dtains a tntel nf_6 sheets- 

1 12!2=3 Issued for Permit tin Use J. Jackson R. Simmons C. Slater M. ffmann 

0 10103103 Issued for Permittiniq Use J. Jackson C. Slater WA S. Kir k- 

REV DATE REASON FOR REVISION PREPARER CHECKER REVIEWER APPROVER 

11{_II11111111^111 

Sheet 1 of 6 DATA SHEETM 24590-PTF4M-PWD-P0001, Rev. 2

i 


2459040TF41fV-PWD-VS -WO33 


Materials of Cons truction 

uatedal dal Mirim,yyp 

T 

Cartainmant 

Top Head SA 240 316 with max. Carbon of 0.030 % See Drawing Auxglary (Note 1) 

Shaft SA 240 316 with max. Carbon of 06030 % Sea Drawing Primeny fNOb 1) 

Bottom Head 

Supped 

SA 240 316 with max. Carbon of 0.030 % 

8A 240 304 with max. Carbon of M030 % Mk to 3F9\ 

Sae Drawing- 

See Drawing 

Primary {Note 1j 

NIA 

NIA NIA NIA 

JadceVCotcMat-FOe 

Jacket 

Into is 

Ape 

F3tgtn9d Bar s tock 

SA240 316 with max. Carbon of 0.030 % 

SA312 TP316 Seamless with max.. Carbon of 0.030% 

SA182 F31618A 479 316 with sour. Carbon of 0.030% 

See Drawing I Thennowell Primary (Note 1) 

see Drawing See Note 1 

Sae Drawing As Nate-1 for Nozda Necks 

Gaukda NIA NIA NIA 

Bolting NIA NIA NIA 

Miscellaneous Data 

oda,meon 

hmuktikm Function 

Vertical 

NotApPlleaWe 

suPPOdTyin 

aeuiation Materiel 

Sldrt 

Not App li kmuladon Tffm kre Inch) I Not Applfeab/e Weld Surtace Finish 

cable 

I Da-sealed 

as laid 

Note 1: All welds forming part of the Primary and mudi fery containments, including the retake attachment we lds shag be 

sw*N-ted to 100% volumetde examinatksh. Radlogreph y Is the preferred method of vokonetdo testing. If N is 

Considered Impraetieaf to perform radiographic examination, the Ssgar may propose albasonie examine;(ons^ 

Note 2! Vessel supports shag be designed to restrain the vessel in a fogy buoymrt state. 

Note, 3: Aft beam bottom Range mate ri al shag be A 572 Or. 50. 

Note 4: Vessel valtigmis are app ro ximate and do not account for manufacturing tolerances, nomz/as, and dlsplao ment of 

lutwnals. 

I Note 5: Contents of this document are Dangerous Waste penaN affecting& 

Note 6: Deletez 

Note 7: BNI shelf emwere 

that an additional O.083' Is available for erosion In the bottom bead and she lf report mbdmum 

thieloess required for an speclgwd load►ng cond/tions, exclusive of erosion and corrosion alfowancesZ. 

Nob 8: 8 1111 shun sure that an additional 0.053° Is available for erosion In the interior conical mutate of the pulse Jet 

Nob 9: Rapdrad data thermal stress anays/s for noales exposed to tempera 

• yell ambkmt temperatu re a 113-F 

• Naadspace temperat ur e or Operating temperature a 218 1F 

• Ambient and hemlepace nat ur al convention hest transfer eoeN(e/anls a 0.895 BbIhrJP`F for vessel head and 

06852 Bblhr fF F for vessel shelf 

• Inlet fluld transfer f re quency and mass flow, rate fornozsie 1139. 

Steam max temperature n 352-F 

Transfer frequency = i transterlmouth 

Steam mass fl 

ow rate = 1,3991h1hr 

Note 10: AN hydrodynamic and overblow loads are for BNI Internal use only and are to be dtrregaMCd by the "Her- 

Sheet 2 of 6 DATA SHEET #: 24590-PTF-MVD-PWD-P0001, Rev. 2

PLANT REM No. 

MECHANICAL SYSTEMS DATA SHEET: VESSEL Z459o4nr-W-PWD-VSL-00033 

Materials of Construction SA 240 316 with max Carbon of 0.0309: 

Design Ufe 40 yeas 

Component Fundion artl The primary fundfon of the Ultimate CverAOw, Vessel are to. 

We Cycle Description . CoDectgravhy drains,. and One flushes 

• CoilOdoveflows from Pretreatment Facility proem vessels. 

• Receive pltsumo emptying ejaclardischarge 

The vessel Is normally empfied once every filly doys. Washdown is not more than once per Year. 

Load Type tan Max Number of Cycles Comment 

Design Pressure prig. Fir 15 10. Nomhratassumpflon 

Operating Pressure isig -0.22 0 292 

Operating 

. "F 59 218 292 UeOomO material Mmpenature range, not between two points 

Temperature 

Contents 4ad6c Gravity 1.0 1.57 MA 

Contents Level inch Empty Flooded .292 Colndkkat with pressure cycles 

Localized Features 

Nomtles Mthin 50'F of operating As above 

Ismoerahnoranue j 

hydrodynamic head on AN Internal cwmponerntL Oeeastonally, an Upset cw cffdm designated W&"~ 

causes air to be discharged from any single pulse jet mixer. AN Internal components shaft be designed for 

Me eombhunkin of the normal operational hydrodynamic bads andoverblow toads, and this lead 

combination Is also to he assumed to ad concurrently with seismic bads. 

The following liable Indhnstes the normal hydrodynamic pressure at ranges of elevations In the vessel and 

the number of. design cyndsa for each condition. The hydrodynamic forces cycle between the indicated 

Pressure ranges app0edsemss the projected area of the component Posidve hydrodynamc farces ad In 

the radial, outward direction and the vertieN, upward direction. Apply fire racier bad slmuhaneously in the 

radial direction and normal to the radial direction in the hortrontaiplmre. 

NanTal ft rod lc; f E j sure - Number of 

Elevation A Elevation 0 1 Elevation C Cycles 

Radial I Vertical Radial I Vertical I Radial I Vertical 

-0.15 to 0..25 1 -0.15900.15. 1 -0.05to0.12 I -0.15.to0.15 I -0.03 to 0.10 1 .0,06 to 0.151 16.8X7 



MECHANICAL SYSTEMS DATA SHEET: VESSEL M904`TF-W-PWWVSL-00033 

Overblow loads vary as a func ti on of the distance lion the center of Me overhlo%** pulse jetmixernoa/e and the elevation °N' above the 

overtilewing pulse jetmixernozzle up to the overflow levefas plotted 

Overblow Loads 

1.80 

1.60 1: ---H

, 


Materials of Construction SA 240 316 with max. Carbon of 0A30 % 

Design Ufe 40 years 


M904nTLAW-PIRAD- -00033 

Component Function and These charge vessels are cyclically loaded using vacuum to fully fib the cha rg e vessel with process gquid and 

Ufa Cycle Description comp re ssed air to Rub, empty the charge voxw. The charge vessels are contained within a parent vessel with 

varying liquid level. They shall be designed to cycle between. the maximum design pressure and the minhnur" 

design pressure plus the external static headimposed by the parent vessel. The charge vessel sopports shaf! 

be designed to cycle between fW buoyant(charga vessel emply and parent vessel bill and Adly boded 

(chargevessel full an d. arentvesselem 

Load Type Mh Max Number of Cycles Comment 

Design Pressure psig FV SS 10 Nominal assumption 

- Operating Pressure psig FV 30 18,100 

Operating 

"F 218 

Temperature 

® 292 Tend nonoladdent whl 

Pressure cycles to be at 218 T c 

temperature cycles. The range given is uniform material 

temlooratum range, rot between afflacentpoklft 

Contents Specific Gravity 1.0 1.S7 WA 

Contents Level inch . Empty Rooded 18,100 Coincident with pressure cycles 


supports. As above As above with contents level changing coincident w ith pressure cycles. 

Notes 

Cycle lrarease: The Selarmust ineresse the numbers ofopersdonat cycles given above by 10Y. to account foreommisatpning duty 

unless otherwise noted. 

Sheet 5 of 6 DATA SHEET #: 24590-PTF-MVD-PWD-P g001, Rev. 2

, 


MECHANICAL SYSTEMS DATA SHEET: VESSEL 24s9o-PrF-altr-Pxasyst.-000ss 

Materials of Construction SAZIO 316 with max Carbon of 0.030 % 

Design LHe 40 years 

Component Function and These pulse jet mixers (PJMs) are cycf1cally]wood using vacuum to Luffy fib the PJM with process.Hquid and 

Life Cycle Description co npressed airto tidy amply tie PJM. The PJMs are contained within a parent vessel with varying liquid 

level. They shat be designed to cycle between the maximum design pressure and the minimum design 

pressure plus the extsmalstato head Imposed by the parent vessel.. -The PJMsupporis shall be designed to 

cycle between fully buoyant (PJM emply and parent vessel fulq and fully boded (PJM Pull and parent vessel 

em in addidon to thrust ,. 

Load Type Mn Max -. Humber of Cycles Comment 

Design Pressure psig FV 85 10 Nominal assumption 

Operating Pressure psig FV 60 16.6x lit 

Operating 

" F 59 218 16.6 x 1 Pressure cycles to be at 218 •Fand non-coinc/dent with 

Temperature 

® temperaturecycles. The range given Is uniform material 

not between tpokits, ts. 

Contents Specific Gravity 1.0 1.57 WA Nominal assump ti on 

Contents Level inch Empty Flooded 16.6x10` Coincident wits pressure cycles 

Thrust Load bf 0 262 16.6 x IT Coincident wo pressure cycles 


Supports As above - As above with contents level changing colncddent with pressure cycles. 

Notes 

• Cycle Increase The Sallermustihmmase the numbers oroperatfonai cycles given above by 10% to account foreommissionmg duly 

unless otherwise noted 

Sheet 6 of 6 DATA SHEET #c 24590-PTF-MVD-PWD-P00 p1, Rev. 2


MECHANICAL SYSTEMS DATA SHEET: VESSEL 290 âPPW° X4°°°°4 

PrtAect RPP4VM - MID 2459lg PTFM64w0-P00028s0046A 

24sg&,P 6-uFP4sm7isi9t11 

= 

245911: ProcessCalalation Oersted2 

Nô^ - VesselDraing 24590•PTFAIV-PWD•F0010 

l 

Charge Vessels(rag Numbers) 

PWseJêt d WerslAgitators (Tap 

Reference Data 

PW6VSL.00121,PWD-VSL-00122,PWO-VS480t23, PYM6VSd.00124y PW&VSL-0012^ 

PW0-PJM,00021, PWD-PJh"M22, PWD-PJM-00022, M04MM=00024, PWD-PJM.00025, PWD- 

PJM4)0026, PWD,PJM-00027, PW&PJM-00028 

RFLS-PMVs (rag Numdrm) PWD411710d10121, PWD-RF0-M 2a PWW"F0-M12$ PIN04MD-00124, PWD4tFD-00125 - _ 

tLrelityl.evei 

Seismic category 

SaMMc" tents 

Design Speci4o Gravity 

Qperdarig,Valume gat . 

QL-1 

SGT 

RadloeeHve Liquid 

1.27 

85,631 

Dash n Data 

FabdcalkmSpecs 24590•WTP-3PS4NY00.7P001 -.. 

Dean Caft ASME Section Vlll Div. 1 

Code stamp .. YES 

NBReBistrasoa. YES 

Wd" Qbs) Emoht .00ereiino Test. 

T Vohmle 9d 103,024 e 227,000 .1,156,000. ' 1,088,000 

Env'vomnental oueticssons 2 NIA AcWal ` 20,11,6004\ 1,127100 z 1,064900 2 

Inside Diameler lmh 276 Wend Design Not Regehed. 

Lengftl- glt ITL-TL) Inch 306 Snow Design Not RaWked 

Vessel 

Desran 

CoNJa*et 

1 

Seismk Desig 24596W7P-3PS4fV00.7P002 

2459D.WTR3PSSS90•T0001 

. Intsmal Preasue Psig 

15 NiA SeismicseseMoment' 

Extemel Pressure 

Temperature 

psq 

'F 

t22 E.O 

212 237 

NIA 

MLA. 

Postweld,HeatTreat 

ConosionAi—enca. 

Not Regnrretl• 

inch 0.00(Notei9,'10) 

Pale 

z 

_m Design MOWTemp. T qW I Hydrostatic Test I 

Noro: Please note that source, special nuclear and byproduct 


are regulated at the U.S. Department of Energy (DOE) facili ti 

es 

exclusively by DOE acting pursuant to its AEA authority. DOE 

asserts, that pursuant to the AEA, it has sole and ex clusive 

responsibility and authori ty to regulate source, special nu clear, 

and byproduct materials at DOE-awned nuclearfacllifies. 

Information contabuu) herein on radionuclides is provided for 


2 4 -) a Issued for Permitting Use 

RPtsWfp or 

PDC 

This Bound Document Contains a total of 5 sheets. 

1 3/19/011 Issued for Perm itting Use . Jackson H. Khurana C. Slater M. ann 

0 10/29/02 issued for PenhitOn Use J. Jackson C. Slater NIA S. Kirk 

REV DATE REASON FOR REVISION PREPAR ER CHECKER REVIEWER APPROVER 

Sheet 1 of 5 DATA SHEET #: 24590-PTF-MV 34PWD-P0002, Rev. 2 

I


MECHANICAL SYSTEMS DATA SHEET: ` VESSEL 2469¢PTISMV-PWD6VSL-00044 

Materials of Construction 

Tea 

t .: Mate Mi ' ids ! Conlalnm nt 

Freed Shot 

BonomRmd 

Suppod 

SA 246 316 Note 1 

SAM 316 Note 

SA 240 316. Note f 

SA 240304 Note 1 

See Drawing. 

Sea 

: 

See Drawing: -- 

Sea Drawing 

Auxiliary (See note 6 2 

Pdmary (Sae note 6) !2Q2 ) s , 

Prboary (See note 6) 

NIA 

J&*quc"%"OJadmt MIA _ NIA . MA 

kernels - SAM 316 : Note 1 a" Drawing..... Thennowell Primary..'. 

aide SM12 TP316 Note 1 See Drawing., Pdma y (See note 6) 7,t 

ForgimplOvetwt -. SA102-F310 :Note see Drawing ..- NIA 

Gaskals NIA .MIA NIA 

BoNnB 

MIA - NIA - - MA 

miscananeeus Data 

Odarftum 

insuYabw Rr4on 

vertbal 

NotAppScable 

I Support Type 

Ihsuhdhn Material 

Sidd 

Not.APPilcable 

hauWmT*kmmsMcb): Not Applleable hnemat Fmish Note3 

Ememal Fstsh Note:3 

To be de termined by Me ve 

Note is Naa earaeA a 0-030 x : 

Nob 2r aowte r 

hVft 3f Wilds descalad as IIKJ 

Note 4r VisaN vebmes am appmxlIm d do not account for the man ufacturing tolerances, t, n*xde yand 

dgW, 

plseantent ofIntere. 

Note S The rassanis b a steak eaa.L/2 an 

Note tk AN welds tensing part of nary and and Omy contabnent hncea6eg nsale attsol ment warns shay be sab)aebd to 100% 

rokmmbk esambatlea. 2 

Nob 7.1 Coetelds^thls document are a Dangerous Waste :PermN alfee:tbg& 

Nob r Dee"$ t 

Note !k aNI sash range tkK 0-e addNenal 0.06" 6 asaaabeAw aresim in the bottom Mad and she3(»POrt ON minbnno thhdowss 

mgahud for &N specmed boding condltlons. exclusive of argslon and cmroslen alfowaness. J2\ 

Nob 105 slit ~/^''°^ that an additional 060430 Is sva/blue foramslon N the I*~ 4m of the Mt senha/ swimm of the pufsejet 

wd+ers. 

Note 1: AN bydro ynamte and over Nam, bads am far Bls/ Imemal use only and are to be disregarded by the saner. 


, 

PLANT ITEM PIN 

MECHANICAL SYSTEMS DATA SHEET: VESSEL 2A596PTFMV-PW6VS1-00044 

Matedaffi of Conshuaa 94 240 316 with mar. Carbon at DOW 9G. 

Desi n Ufa 10 years 

Component Funtlionarad This Is a "batch" vessel and cycle from nearly empty to needy full. This vessel will be in One fl6 mode for one 

Life Cycle Desaiotfon day then the dlse&M mode over ON next day. 

_ 

Load Type Min Max Number of Cycles Comment 

Desion Pressure 

O .- Pressure 

ra ^ •F 

=8.0 

-0.22 

so 

15 

0.00 

212 

10 

7,300 

7,300 

Nominal assure lion 

- 

Uniform material temperature range not between two points 

Contents S 6c Gravi 

Contanffi Level 

Localized Feattaes 

krh 

1.00 

Empty 

1.27 WA 

i 7,300 CoincldBM with pressure cycles 

Nozzles VM1n 50 Fofvessel: 

ends re s 

As above 

Rveirndvna nnin Lnaclinn /,\ 

in normal opera tion, pulse jetmixers discharge O'gpid blo the parent vessel imposIng a cyclical 

hydrodynamic load on allkdamal components. Occasionally, an upsetcond/tion designated ovarblow' 

causes alrto ladtseowrged from anysingie pulWiet mlrer. All internal components shall be designed for 

the combina 

. 

ti on of Me normal operational hydrodynamic bads and ovelbbw loads, and this load 

combina tion lsalso to be assumed to a ct concurremlly with seismic loads.. -• """•—•- 

The fanowhng table bdbatesOn normal hydrodynernk pressu re of elevations In the vessel and the number 

of design cy cl es for each condition. The hydrodyrmmfe forces cycle between the indicated pressure tinges 

applied across the prigaetedam of the component Positive hydrodynamic forces act in the radial, 

outward direction and Ore vertical, upward direc 

ew+mne 

ti 

on. Apply Oa radial lead simultaneously In the radial 

direction and normal to tie radial dlrec0on in the horizontal plane. - ar -eenw, e 

re A 

Nbrrmai lion Hydrodwarmc Pressure Ranae. Psi Numberot 

Elevalhri A Elevation 5 Elevation C Cy cl 

es 

Radial Ver4ral Radial I Ve rtical Radial Venicat I- 

-0.15900.25 1 -0.16to 0.15 -0.tl5 to 0.12 1 415 to 015 1 -0.03 to 0.f0 1 -0.06 to 0.151 17.3X1 1 

Overbiow loads vary as a Amction of the horizontal distance from the center of the overblowing pulse jet mW rnozzle and Ere elevation'N' 

above the overblowing pu&e jet mixertm le up to the overflow level as plotted: 

Ovetblow, Loads 

1.80 

1:6D 1.5 f-H


24590-4 TFMV-Pnv-VS400044 


E ui ment Cyclic Data Sheet, 

Component PWD-VU-00121, PVVD-VSL-W12; PW6-VS400123, PWD.VSL-00124, PWD-VS1.00125 

Component Description I Charge Vessels 

Materials of Construction SA 240 315 with max. Carbon of 0.030 % 

Design Life 40 years 

Component Function and " These charge vessels are eyclkOW boded using vacuum to fully NJ the charge vessel with process liquid and 

Lffe Cycle Description compressed alrto fully empty the charge vessel. The charge vessels are contained within a parent vessel wkh 

varying l/quhllevel. They shall designed to cycle between the maximum design p re ssure and the minimum 

- design pressure plus the exfemai stage heed kWosedbytheparent vessel. The charge vessel supports aball 

be designed to cyclebeiweeq fu0ybuoyant(charge vessel empty and parent vessel fulo and fully loaded 

re 

dm a vessel full and' nt vesseleaWW... 

Load Type Mtn Max Number of Cycles Comment 

Design Pressure Palo FV 55 10 Homina/assumption 

Operating Pressure psig FV 30. - 1.8 to, - .. 

Operaffm 

.Temperature 

T s8 212 -7;388 . .Pressure cycles; to be at 2120 Fand non-cotnMdent with 

temperature.cycles. The range given Is:unlOwn; material 

-tem lure rangk not betweenecticent pdntL 

. 

.Contents Specific Gravity 1.00 1.27 WA 

Contents Level Inch Empty FModed 1.8 

to 

, Coincident with pressure cycles 


Supports As above As above with contents level changing. cdnddentwithpressure cy cl es. 

Notes 

Cycle increase: The Seller must increase the numbers of operational cycles given above by 10% to account forcommfssioning duty. 

unless offierwise noted 

Sheet of 5 DATA SHEET #: 24590•PTF•MVD-PWD-P0002, Rev. 2


24590-P7F-MV-PW&VSL M" 

, MECHANICAL SYSTEMS DATA SHEET: VESSEL 

Materials of Construction SA 240316 w th max. carbon of 0.030 a 


Component Function and These pulse jet mixers (PJMs) are cyciicafly loaded using vacuum to fully fill the PJM with process liquid and 

Life Cycle Description compressed air to fury empty the PJM. The PJMs are contained within a parent vessel wltlr varying liquid 

leve! Tbeyshall be designed to cycle between the maximum design pressure and the minimum design 

- pressure plus the external sfalic head imposed by thepmam vessel The PJMsupports shall be designed to 

Vote behveen Polly buoyant (PJM empty and parerrt ves d Me and fb0y tended (PJM full and parent vowel 

emP41 states. Thrust load sha0 be -gad only to the fully buoyant state. Assume the parent vessdis fu0 for 

. 50%ofBtermmberot'PJM s 

Load Type Mn Max Number of Cycles Comment 

Design Pressure psig FV 85 10 Nom/nel assumP00n 

Operating Pressure prig. FV 60 1.73x10 

Operating 

Temperature 

-F 59 212 1.73x 10 Pressure cycles to beat 212- F and non-coincident with 

temperature sydes. The M9091ven is uniMrm material 

temperature ra a not between.ao7acontpoints. - 

ContentsSpecificGravity 1.00 1.27 WA 

Contents Level inch Empty ' Flooded 1.73 x 10 Coincident with pressure cycles 

Thrust= 

b, 

Localised Features 

0 a 284 3 1.73 x1 = 

Supports As above As above with contents level changing coincident Will pressure cycles. 

Notes 

• Cycle Increase: The Seller mustmcrease the numbers of operational cyder given above by 10% to account for commissioning duty 

unless otherwise noted.. 

Shout 5 of 5 DATA SHEET #: 24590-PTF-MVD-PWD-PDDD2, Rev. 2 

.



246904 rF4"4WM-VSJL.00043 

. 

Project MkIyrp P84D 245 Np• ww 

Project No 24ti90 Process Calmlation DELETED 

Projeci Sib HaMord Vessel Drawing 24590•PTF-MV4%D~0300i 

Descrip tion HLW Eminent Transht Vassa/ 

Charge Vessels Rag Membe rs) 


Pyyp.VSL-00141, PWD-VSL-00142 

Puleejet Mixers/ Pglbto rs (rag 

Numbers) 

PWD-PJAM100410 PW6PJM-0004$ P11111IIII-PJNL000A 1 2141110.PJM-00044, PWD-PJM-00045 

PWD4VAI-88046, PWD •PJANOWr PWD-P AILDO& 8 

RFDSIPMPS Rag Numbers) 11OWD-RPD-00141, JIM-M-00142 

Desion Data 

Quaft Level 

sek,n io category... 

pL.1 

SC4 

Fabrkadon Specs 

Design Cade 

24590-WT"P&AfV0N7V001 

ASME NR Div 1 

Service/canbnts Rad/eaaff" Mquild Code Stamp Yes 

Design Specific Gravity 1.57 NB Registra tion Yes 

Opera ting Volumegal 48,580 Weights Me) E r s !to 

Teel Volume 

EnvvomTmW Ure9 11cariwrs 

gel 41AW 

NIA 

Es timated 

Actual ` 

115,400 

129,000 

BRIM 

517,300Z2J 

465,000 

499,400 

Inside Dbmeter mctr . P88 Wind Design Not ReWfmd 

Le ng7YHepht frL-TL) inch. gs Snow Design Not Required 

vessel 

Operatino 

vessel 

2laiga 

Col/Jacket 

2958 

Seismic De sign 24590-W7P-3PS-SS90•T0001 

245904VlR39S•IrV00.7VM 

Internal 

Pressure psig 0 1S MIA SeianicBsse Monrenta fMb 

ExbmatPressure 

Tempera lme 

Psi8 

°F 

0.22 

219 

PV NIA 

NIA 

Poslweld HeatTreat 

CartosiertAAowance 

Mot:Reeuhed 

Inch O.as(N s.7,9J . 

Min. Design Metal Temp, •F 0 HydmslsticTestPmssures Psg 19.5. . 

Note: Please note that souk 

materials, as defined in the / 

are regulated at the US. De 

exdushrely by DOE ac ting p 

asserts , that pursuant to the 

Information contain 

process description 

acial nuclear and byproduct 

Energy Act of 1954 (AEA), 

ant of Energy (DOE) facilities 

it to Its AEA authority. DOE 

it has sole and exclusive 

date sauce, special nuclear, 

vered nu cl 

ear facilities. 

Idionuckles is provided for 

2 3 28 0'S Issued for permitting Use 

r -+ 

' op [:ASy 

re 

q ^ 

,P OD30932 

^^ 8p18TB1t^ 

AsslDNAU 8^0 

EXPIRES 12/10/[foci 

This Rrumd Dminnant AtnwfaizA a trrtai of R sh

i 


MECHANICAL SYSTEMS DATA SHEET: VESSEL 2459o-P7amV-PwD-VS100o43 


Ctamm Mirk u 

e 

Containment 

Top Nord SA 240 316 with mar Carbon of 0.030 % - See Drawing Auxi li 

ary (Nob 1) 

Shell SA 240 316 with mar Carbon of 0.030 % See Drawing Primary (Note 1) 

Bottom brad SA 240 316 with mar Carbon of 0.030 % sea amwhw Prb T Note 1) 

Support SA 240 304 w it h max. Carbon of 0.030 % (Nob 3) See Drawing NIA 

JadsoVONWHal-Pipe 

is" 

Imemats 

Ph* 

FmginpN Barstxk 

Caskets 

NIA 

SA240 316 with max. Carbon of 0.030 % 

SA312 711316 Seamless wkh max. Carbon of 0.030% 

SA182 F31SM 479 316 with ma x. Carbon of 0.030% 

NIA 

NIA 

See Drawing 

Sea Orawlrg 

See lbawlrrq 

NIA 

NIA 

7hemnowen Prima ry (Nob 1) 

Sae Note 9 

As Note 1 tor Nozzle Necks 

NIA 

BOOM NIA 


NIA NIA 

Cdentadm 

Irmuleton Fmolon 

Inaulalm Tfafuaes(inch) 

Vertical 

*at Appllpble 

Not APPUMNe 

Supped Type 

Imiaaon Materiel 

Weld Surface FWM 

Sk(rt 

Not Applicable 

I Do-sewed as hid 

- To oe dewntuned by ale vendor. 

Note 1: All welds forming pa rt of the primary and ouxl8a ry eonbMneents, Including the nozzle attachment welds shag be 

subJOobd to 100% volumetric examination. Radiography Is the preferred method of volumstric tasting. NN Is 

considered Impractical to perform radiographic asandeation, the Sailer may Propose uWasonh axnmbm;H;; ^L 

Nob & Vessel supports shaS,be designed to nstraM On vessel M. a bfiy buoyant state.. 

Note 3. Rhg Beam bottom Hang* material shag be A 572 Or. 50. 

Nob 4: Vassal vo/eft are approxheab and do not ac co unt far manufacturing tohrances, nozzles, and displacement of 

mtemak.(2-\ 

Nob 5r Centeofso^f ,this doeumest are Dangerous waste Pernik affectIng.Q 

Nob & Dilated 4\ - 

Note 7. RON shag ensure that an additional M123• Is ave8able for erosion In the bottom Mad and shall reportmbrbnum 

tbhxmess required for all specified leading eonditloas, exelusNe of erosion and corrosion sHowanees/ 

Note & Big shagthat an addktnal 0.078• Is ava il able for moshm in Me bebrlor r:oaleai smfaee of the P also let 

citizens. 

Note 9: Required data fr thermal -fro as armiysh for nozzles exposed to higher temperatures. Q 

• Call ambhnt temperature s 113 1F 

• Ne irdspeba temperat ur e or Operating tomparature m 218 IF 

• Ambient and headspaee nohow convection beat inumil iow9nelents a &895 Bteghr 01" IF for vessel head and 

0.797 Illega l Its IF for vessel she8 

• brief Hold transfer frequen cy and mass Row rate for nosh N36. 

Steam max tamperat urs a 3521= 

Transfer frequency a 1 transferlmonth 

Stamm maim now raft n 1,399161hr 

Note for Ail hydrodynamic and ovarblow lamb are for Riff Internal use, only and are to he disregarded by the stlhr.^ 

COU 

Sheet 2 of 6 DATA SHEET 1F: 2459043TF-MVD-PWD-P0003, Rev. 2


24590•PTFI 1IV-PWO-V5L•O0M 

, MECHANICAL SYSTEMS DATA SHEET: VESSEL 

Equipment C clic Data Sheet 

Plant Item Number. 2/590-PTFMV-PW&VSL-WW3 

Component Description Parent Vessel 

— ^Tha lnrnrmaenn lulnm re nmUlsfnnal^n,i wnvdineiae nnanarrnnBn iliMr for faenlni asaneeYneM n la nni rn M,êasl as nnarfenMl Nah_ 

- Materials of Construction SA 240316 with mau Carbon of 0:030% 

Design life 40 years 

Component Function and . Receive and store waste from HL .W Vitrification Plan; pli samp (PWD-SUMP-00040), and va ri Life Cy 

ous K" 

cl 

e Descrip ti 

on drains. 

- 

Transfer waste to Plant Wash Vessel (PWD-VSL-=U) 

HLWEMuent Transfer Ves se l operates at normal operating level for a vantifatlon seal between fadwes R's 

Char li e Vessels discharge liquid du ri ng normal operation and equal volumes "ofIWIdare received Into the 

vessel. Tbov"selisnon"&OyempdedoncegEday. Washdown h notmore titan once 

Load Type Min Max. Number of Cycles Comment 

Design Pressure psig FV 15 10 Nominal assumption 

Operating Pressu re psig -0.22 0 14000 

Ope rati ng 

Temporal= 

If 59 218 14,600 Uniform mate ri al temperature range, notbetweart two, points 

Contents Specific Oravtty 1.0 1.57 MIA 

Contents Level inch Empty Flooded 14,600 _ Coincident with pressure cycles 


Nozzles MOO 507 of vessel . As above 

nge 

o ra I d 

causes afr to be discharged fiose arryshwispulsojetmi xer.. Aff internal components shalbbe 1185 

On combina ti on of the normal operational hydrodynanak loads and ovarblow loads, acrd this And 

combinati on Is also to be assumed to ad concurrently with seismic loaft 

them vberof"OncyclesApreach 

in 

forms ad In 

eausly In the 

p 

Normal O eration 'c Press ur e 

Elevation A Elevaticn.B I 

Radial I I Radial I Ver tical I 

Elevation C 

Radial I Vertical 

^ Numb er of 

Cycles 

-015to0.25 -0.15t* &15 1 -0-05.160.12 1 415to0.15 I -0.03to0.10 -0.05100.15 &1X1 

Sheet 3 of 6, DATA SHEET 0: 24590-PTFddVD-PWD-P0003, Rev. 2


245904VTFJW4*WV-VSL4W 3 


Overb/owloads varyas a function of the distance. from We centerofMe overblowfngpulsejet mixernozz/e and the eleva tion'W above the 

overbloadag pulse Jet mixer no zz le up to the overflow level as plotted. 

Overblow Loads 

1.80 

IM 1 .5 #H


J PLANT ITEM No. 

Design Lite 40 years 

MECHANICAL SYSTEMS DATA SHEET: VESSEL 2459047FWW4RWIW3L-00043 

SA 240316 with am Carbon of 0.030 % 

- - - - -- - - ------- ----- 

Component Function and These charge vessels are eyclitxty loaded using vacuum to talyt8 Me vessel with proem liquid and 

Life Cycle Description eompressedair to (u0y empty the charge vessel. The charge vessels are comalnedwtMn a parent vesse/with 

varying liquid level. They shat be designed to cycle between the maximum design pressure and the minimum 

design pressure plus the external shgc head imposed by the parent vessel. The charge vessel supports shag 

be destyrned to cycle between filly buoyant(eharge vessel empty and parent vessel hdq and fruity loaded 

vessel fullandparent vessel em 


Design Pressure Psig FV 55 10 NomMalassunrp8on 

Operating Pressure psig FV 30 761,000 

Operating 

Temperature 

T 59 218 14,600 Pressure cycles to beat 218'Fand nonaroincidentwlth 

Co ContentsSp SpecificGr Gravity 1.0 1.57 WA 

temperature cycles. The range given Is uniform matwialQ 

temperature, 

ar ture not between nts. 

Contents I.eve/ inch Empty . Flooded 761,000 Coincident with pressure cycles 


Supports As above As above with contents kwd changing coimident with , pressure cycle 

Notes 

• Cycle increase., 17re Sellermustincrease Me numbers ofoperatonal cycles given above by 10% to account for commissioning duty 

union otherwise noted 

Sheet 5 of 6 DATA SHEETS: 24590-PTF4riD-PWD.P0003, Rev. 2


MECHANICAL SYSTEMS DATA SHEET: VESSEL 245 

MY'WJ)-V8L OD 43 

Materials of Construction SA 2!0316 with mar. Carbon of0.030 % 


Component Function arwl 

Life Cycle Description 

These pulse Jetmbters (PJMs) are cyclically loaded using vacuum to fully fill the PAM with p rocess liquid and 

compressed air to fully empty the PJp. The PJBfs are contained within a parent vessel with varying liquid 

level Tbeyshag be designed to qWe between the maximum design pressure and floe minimum design 

pressure phis the wdernalstafk headhnposedby the parent Vess el . The PJM supports shall be designed to 

cycle bebvew fully buoyant {P empty and parent vessel AdQ and fully loaded (PJM fu ll and parent vess el 

em in addition to thrust ^ 

Load Type FAn Max Number of Cycles Comment 

Design P ressure 

Pressure 

Operating 

Temperature 

- psig 

T 

FV 

FV 

59 

85 

w 

218 

L31 

10 

1iXt 

11 X 1 

, LYomhrai assumption 

Pressure cy cl es to best 218 T and non-coincldent whh 

tempershme cycles. ?ft range given Is uniform materief fA 

Smnperahrre range,. not behvow a0centpoints. 

Contents Spedfic Gravity 

contents Level Inch 

1.0 

Empty 

1.57 

Flooded . 

WA 

11X1 CoMehlent wo pressure cyc le . Thrust Load lot 0 264 11XIO, 

s 

Coincident with pressure cycles 

Localized Featu res 

supports As above As above with contents hovel dtanging coincident with presents eydes . 

mows 

• Cy cl e increase: Thu Seliermust fac ease fire numbers ofopemtlond cycles Biwa above by 10% to account for commissioning duty 

un le ss otherwise noted - 

Sheet 6 of 6 DATA SHEET#: 24590-PTF-MVD-PWD-P0003, Rev. 2

Note: Please note that source, special nu clear and byproduct 


are regulated at the U.S. Department of Energy (DOE) facili ties 

exclusively by DOE acting pursuantto Its AEA autho rity. DOE 

asserts, that pu rsuant to the AEA, it 

has sole and exclusive 

responsibi lity and authority ti p regulate source, special nuclear, 

and byproduct materials at DOE-owned nuclear facili ti es. 

Information contained herein on radionuclides is p rovided for 

process description purposes only.' 

FLAN 1 I 1 CM NO. 

MECHANiCAL SYSTEMS DATA SHEET: VESSEL 245W-Pr^F"-VM- M'8 

Project RPP-WTP Ps10: 24590•PTFM6-UPWP00011P00071P0008 & Q 

24590-PT .0046. 1 

Project Na 24590 P roce ss Ca colation: i)ELETED L 1 

'Project Site: Hanford Vessel Drawing .. .24590-P7F4MIA—UFP-P0002 

Descrip tion: 7 ltraRitratlon Feed iempartatloo VesseF. 11 

wararonr_a nnta 

Charge Vessels (rag Numbe rs) DELETED 

Pulse)etl faers/Agitators 

(rag Numbers) 

RP XVwr ps (rag Numbers) DELETED 

UFP-PJM-00045F UF1 2%-PJM-00046, UPP.PJM40047, UM-PJNF00048s UM-MM-000419, 

UFP-PJM-00050, UFP-PJMA0101, UFP-PJM000f02 

Dasion Data 

Quality i-suet QL-1 Fabrication SPece 245904VTP-3PS-MV00.4P001 

seisnec Category - SC-1 Design Cede .ASME Vill.Div 1 

Saviou/Centents.. Rad/oaetive Liquid CbdeStemp. yes 

Design Specific Gravity 1.32 NB Registration .yes - 

MroctrnumOPeratitg Volume 8a1 "-626 Weights 0s) 911121Y 90_0"M- T_esJ 

Total Voume gal 75,593. Gmat^ 184,000 934,000 822,000 

Emsonmemal Qualification NIA Achml* 223,249/U 970,440:1 887,140/i\ 

Inside Diameter inch 240 Wind Design Not Required 

LengthMeigm QL-TL) inch 306 Snow Design Not Required 

Vessed- 

ODSM§n -Q 

Vessel 

Desgn 

Cog/Jaoket 

Design ` 

Seismic Design 

- 

24590-WrP-31IMS-MV00.7112002 

24590•YVTP-3fe"S90•70001 

Internal Pressure 

External Pressure 

Psig. 

'psigl 

ATM 

'0.217 

15 

12 1 

(Jtofa 3,4 

35 

0.0 

Seisms: Base Moments 

PoslweldHeatTreat 

F 

Not Required 

TemperaWre 'F 122 150 150 1 Camosion NlOVlance Inch 0.040 (See Notes 12 1 

AEn. Design Meial Temp. -F 4p HydrostatieTesf Pressure * Ps5 

6::P(F1ES F2/901ore 

ISSUED By 

RPRWTPPDG 

This Bound Document 6& tair/s a total of 4 sheets. 

1 3 2$ oS Issued for Permitting Use 

0 1018103 Issued for Permitting Use .. Jackson H. Khurana C. Slater M. offmann 

REV DATE REASON FOR REVISION PREPARER CHECKER REVIEWER J APPROVER 

Sheet 1 of 4 DATA SHEET# 24590-PTF-MVD-UFP-P0002, Rev 1 - 

S

a^ 



24580-PTFMV•UFP-VSt.-o0001B 


,' ant del ' t Thickness / Size Containment 

sop I-leatl - SA 240 316 Noe-1 See Drawing Auxiliary (See Note s) t 

"'$hal SA 240 316 Note 1 See Drawing Primary (See Note 8) z 

' 

. , mom Head 

Supped 

JadeUCOiIsMaBPlpeacket 

intemals 

Pipe Nozzles 

Foleinnsi Barstack 

Wash Rig Pipe 

so1Sn9lGaskets 

-- Wear Plates 

SA 240 316 

SA 240304 

a;940 316 

SA. 240 316 

SA 312 TP316 

SA 182 F316 

SA 312 TP316 

NIA 

SA 24O 316 

Note 1 

Note f 

Note 1 

Note f 

Note 1 

Note f 

Mote 1 

.Note 

See Drawing. 

` See Drawing 

See Drawing 

See Drawing. 

See Drawingg 

Sae Drawing 

See Drawing 

....NIA 

See Drawing - 

Primary (See. note 8 

NIA 

NIA 

Thermowells 

Prim ry (See 2= -8)y s 

NIA .: 

MIA' 

NIA - 

-MIA 

z '. 


OdeMatian .. 

Insulation Fundion 

Insulation7hkikneaa(inch) 

Yoruba; 

NotAppUcabfe. 

Not Applicable- 

.... 

skopprt iYPe 1 

Insala6oe Mahmw 

intemat Finish 

External Finish 

Skirt 

Not Appll 

Note r 

Note 2 , 

ble 

To be determined by the Vendo r. 

Note 1, Maximum 0,0300A carbon, 

'Note 2. Welds de-scaled as laid 

Note 3. Exte rn 

al design pressu re under the jacket shall be ratedfor t jacket design p re ssure plus 1 psis internal 

vacuum In the vessel to account for ventilation fa rt pressure re 

Note 4. The vessel design, external pressure Is estimated only and shall he. confirmed by the Seller's ealeulatkmj 

Note S DELETED !- . 

Note 6, Vessel emen o are app=ate and do . Tro t account for the manufactudog toleranees,.nozzles, and 

dlspfacrnetf lrrtarna4 s .. 

Note. 7. This vessel is in a Black Cef(^ 

Note 8. Ali welds forming part of the primary and a iffary containment including nozzle attachment welds shag be 

subjected to 100% volumetric exambeath I J^ 

Nate 9. Contents this document are Dangerous Waste Permit affect)ngA 

Note 10, DELETED/i\ a 

Note 11, DELETE - 

Note 12. BNl shagensure that an/$.\dd►ffonat 0.087° is available for erosion in the lower 4v of the inferior conical surface 

of the pulse jet mixers. r 

Note 13, Seiler shall provide wear plates for erosion confrol on the bottom head. 

Note 14. All hydrodynamic and overblow loads are for Bill internal use only and are to be disregarded by the seOer. 

Note 15, Required data for thermal stress analysis fornozries exposed to higher temperatures, Q 

Cell ambient temperature a 113 OF 

• Headspace temperature or Operating temperature a 122 °F 

Ambient and headspace natural conveetion heat transfer coefficients 0.703 Btuihr ftz F 

• Inlet gold transfer frequency and mass Now cafe for nozzles N15 and 1155. 

Fluid max temperature z 212 OF 

Transfer frequency= 1 trarrsfer/9 days for 1.5 hrs, 

Seam mass flow rate..- 2885 lblhr 

Sheet 2of4 DATA SHEET#24590-PTF-MVD-UFP-P0002, Rev 1

1.80 

1.60 

1.40 

y 1.20 

m 1.00 

m 0.80 

0.60 

a 040 

0.20 

0.00 


MECHANICAL SYSTEMS DATA SHEET: VESSEL 24$90-PTF-WV-UFP-vsf 0000'fs 

Equipment Cyclic Data Sheet 

Component Plant Item 24590-PTF-MV-UFP-UFP-VSL-000018 

Numbec 

Component Descrip n 1, Ulbafiltration Feed Preparation Vessel 

Thn.:nfnrmaf(nn hnrxu it nmvieinnai.^nvi envainnx nnerarinnar tlnfv Mr raiinna ac

MECHANICAL SYSTEMS DATA SHEET: VESSEL" 


24sao-PTFMv-uFP- vsL-00001B 

Notes 

• Cycle irfrease: Increase the numbers of operational cycles given above by 1056 to account forcommissioning duty unless otherwise 

•'Nozzies no J18.andN55shallbefatigueassessed/analyzedfor36Wtemperaturapressurecyclesf rom0psigat55Fto15psig at212-F, i 

the pressure cycle shall eolndde with the temperature cycle- See note 15 on page 2. 

Equipment cllc Data Shoot 

Component Plant Item UFP.PJM-00046 'UFP-PJM-00046: UFP-PJM-00047, UFP-PJMA0048, UFP-PJM-00049, UM-P.111-00050, UFP- 

Number. PJM-00101, .UFP-PJM-00102. 

Component Description Pulse JetMbrers 

Materials of Construction ASME SA240 316 with mar. carbon comer# of 0.030 %.carbon 

Design Lffe .. 40 Years - 

Component Function and These pulse(etmixers (PJMs) are cyclically loaded using vacuum to fully fill the PJM with process /Squid and 

Ule Cycle Description compressed air to fully empty the PJM. The PJMs are contained within a pared vessel with varying liquid 

:level. Theysball be designed to cycle between the maximum design pressure and the minimum design 

... pressure plus the external static head Imposed by the parent vessel. The PJM supports sha0be designed to 

cycle between fully buoyant (PJM empty and parent vessel full and fully loaded (PJM full and parent.Yessel 

-empty aides. Thrust load shag be ' p0edonly to the fully buoyantstate. Assume theparem vessells hull for 

50% ofthenumberofPJMc les. r. 

Load Type Win Max.... Number of Cycles Comment. 

Design Pressure psig. FV 80 10 Nominal assumption for testing 

Operating Pressure psig FV 72.5 1.64x1 

Operating 

Temperature 

°F 68 _ 122 3650: Parent vessel will operate normally at a temperature of 77 OF 

Contents Specific Gravity .1.00. 1.32. 3650: 

Contents Level inch Empty Hooded 1.64X.1 

Thrust IV o 330 1.64X9 

p 


Nozzles 

Supports 

Within 9 1F of Operating 

tem erature ran e... 

Buoyant Loaded - 

As above 

1.54X 10 

Notes 

• .Cycle increase: The Sellermustiocrease the numbers of operational cycles given above by 105% to account for commissioning duty 

unless otherwise noted .. 

• DELETED 

Sheet 4 of 4' 

DATA SHEET# 24590-PTF-MVD-UFP .P0002, Rev 1

PLANT ITEM NO. ^^, 

MECHANICAL SYSTEMS DATA SHEET: VESSEL 24S90-P7PMV-UFRVSL4MM2C ! 

-ram.,. _e-rc_.. r_ _ Vv:n_ oaeû r. 

Profs t 

Pr oject No. 

Woactske: 

Oesoription: 

RPRMVTP P&ID: 

24590 

.Process culation: 

Man rd. -Vessel. Drawing 

Ultralliter Permeate CoilocdosVassal 

245904rUFP-P0004 /P1gM"8W4M9PK 

DELETED 

24590'ie F -UPR4 0007 cr 

. 

- . 

$ 

Charge Vessels (rag Numbers) 

Keterence uata 

UFRVSL-0002$ UFP-VSL40024, UFP-M-00025, UFP-VSL-00069, UFP-VSL400070, UFP V$L- ^- 

Prdselet Korn / Agdabrs (Tag 

Nurnt re) 

RFDslPUmps (Tag Numbers) 

00084 . 

UFRPJA14W70, UFP-P61111140073, UPP-PJAI-M74 UFP4eJAf4W T7, UFP-PJM-00078, UFF- 

PJM40107. 

10FRIRFO-00042, UFP4 FD-0004.7, UFP°RF04 0044, UFP4WD-00035, UFRRFD4)W46, UFP-RFD- 

00048 

Desian Data 

Duality Level 

Seismic Categ ory 

Semcalcoments 

Design Spec& Gravity.. 

Maidmum Operating Volume 

7otatVelumegal 

gal 

QL-1 

SC4 

RadlOaettve Llgald 

f.26 

3%V7Z 

34,700 

Fabrication Specs 

Design Code 

Code Stamp. 

NB Registration 

Wei" Me) 

EsdmaNd 

gdual• 

24890°WTP-3PSMV0&TF00f 

ASMF Vlll Div 1 

..Yes 

Yes 

E [..â^ ^ 

95,300 477,000 

100,000. 427,800 

Std 

38SAW 

398,700 

Inside Diameter inch 180 WindOesign Not Raqu&" 

LangtWeigN (n TL) inch . 255 Sr Dasign Not Regalrad 

Vesrud Vessel CoilJackst Seismic Design 24590-W7P-3PSMV00-TP002 

Ooaretnu Des-ion Deaan 

24590•M IA-3PSSS90.70001 

Inte rnal Press" Paig ATM 15 MIA seianic Ease Manemt 1CIb 

External Pressu re Psig - 0.217 1029 NIA PosNveld Heat Treat Not Ragalled 

Temperatu re -F 86 120 NIA Corrosion Allowance moh 0.04 

Min Design Metal Temp. °F 4O Hydrostatic Test Pressure F 

Note: Please note that source, special nuclear and byproduct 


are regulated at the U.S. Department of Energy (DOE) fa cirdies 

exclusively by DOE ,acting pursuant to its AEA authori ty. DOE 

asserts,.that pursuant to the AEA, it has sole and exclusive 

responsibility and authority to regulate: source, special nuclear, 

and byprodu ct materials at DOE-owned rwdear fa cilities. 


process desc ription purposes only. 

0$ P. AStr,_ 

r. e^ WQA 

q w• 

Ap 003M2 m^ 

O^ 

is 

EXPIRES 12110/nr0 

$^61 

188M n'i 

RPPAW PW 

31 1-1 10 5 

This Hound Document Crdufhirus a total of R sheets. 

1 3 /r} o. Issued for Permitting Use 

0 1018103 Issued for Permitting Use 4L Jackson H. Khurana C. Slater ffm-nn 


Sheet 1 of 6 DATA SHEET f: 24590-PTF-MVD-UFP-P000T, Rev 1


MECHANICAL SYSTEMS DATA SHEET: VESSEL 246904'TF4MV-uFP-VSL400062C 


n nt Material Inim s 1' Containmod 

Top Head SA 240 316 Note f San Drawing AtodDary (See Note 6) 

B r SA 240 316 Note 1 - See Drawing Primary (Sea Note 6) 

Bottom tieaa SA 240 316 Note 1 See Drawing Primary (Sea Note 6) 

support SA 240 306 motel Sae Drawing NU 

jsdW/Co WFAff-Pipe Aolmt 

k,WMWs 

NIA 

SA 240 316 Note 1 

MIA 

See Draw 

MIA 

in 

g Tr ernroweas Primary 

Pipe SA 312 TP316 Note 1 Sae Drawing Primary (See. note s) 

Forgings/ Bar stook SA 162 F316 Note 1 Sae Drawing I" 

wash tng wipe - SA 312 TP3f6 Note 1 Sae Drawing NIA 

BolVnOt Gaskets NIA NIA NIA 


Oflentabw Vertical Supp°nTre U t 

ImuleW FunMn NotAppDOab/e Ineuiation ttate,lei NOt App6eabie 

Insulation ThUMM (inch) Not Appik:abb intemW Finish Note 3 

ExbmWFrnlsh pots 3 

Nob 1, Naalo„m, 030% carbon. 

Nob Z. Deleted 

Nota.3: wow MLesdasbid. 

Nob 4: Ifs - - 1 vWud»t we appmmbe,da and do net aceounf br tin Wanuhetnrtnp teirene % norrbs, and dispiaceaveM of Internals. 

Nob 5, TMs veswl Is hi a ahrb Or& '/1^^ 

Nob B: All wNds ren„/ag pa rt of tjte prrhaary and sesi0a ry eentalnmamt inebd/e0 noa/e attachment weWs shall be suldocted to 100% 

vWW,et.b su,amlea(bn. 

Nab 7. ConbntsFXNds daCeu aHre a Dangerous wash PwmN atAatioB. I& 

NoDebfed , A 

Mots &: 

Sheet 2 of 6 DATA SHEET g: 24590-PTFMVDd1FP-P0o07, Rev 1


MECHANICAL SYSTEMS DATA SHEET: VESSEL 24590•P7F111V-OFRVSL-000e2C 

N nt Plant Item 

Equipment Cvclic Data Sheet 

-LIFP-VSL-00062C 

rnber. 

ComponentDescriPOon 

=!7 

I UltraAlterpermeate Collection Vessel (Parent Vessel! t 

The Information below Is previsional and envelopes ooemlional duty forfatinoe assessihent ` It is not to be used as onemilonal dab. 

Materials of Construction ASUE SA240 316 with max. Carbon of 0.030% 

Des' n Life 40 Years 

Component Function and 


This vessel collects permeate hom the UBrsffitration modules. The permeate is transtrffW from this vessel to 

the Ceaium Ion Exchange process. System, vessel CXP-VSL.MWI,.for farfherprocessing. The permeate is 

also sampled to check for solids In this vesseL The vess el is 08ad over a period of approximately 32 hours. 

An aperwift le for this vessel filed then emeoffe4 Is approximately43 horns. 

Load Tym Min Max Number of Cycles Comment 

Desi nPressure I ipdg .29 15 10 Nominal assumption fortes ti n 

Operating Pressure psi9 40.217 0.000 WA The vessel wig remain order constantpressure depend/ng 

nthe NVAC anL 

Operating T •F 60 86 10,400 

Contents S c Greed TOO 1.26 10,400 . 

Contents Level inch 27 286 10,400 


Nozzles 

- 

Within9°Foroperatiag 

I famperatureraW. 

I Asabove 

Sheet 3 of 6 DATA SHEET g: 24590-PTF-MVD-UFP-P0007, Rev 1


MECHANICAL SYSTEMS DATA SHEET: VESSEL 24590*P7F-mv-BFP-VSL-000626 

hydrodynamic load on all Internal components. Occasionally, an upset condition designated'overbiow' 

.causes air to be discharged from anyakwho pulsejetmixer. ANintemai components shag be designed for 

tits combina ti on of the normal operational hydrodynamic loads and overbow loads, and this load 

combination is also to be assumed to act concurrently wltir seism ic loads. 

The following table indicates the normal hydrodynamic p re ssure for at ranges of eleva ti 

ons to tire vessel 

and the munberofdasign cycles foreach condi ti on. The hy&Wynemk forces cyc le between Me Indicated 

pressure ranges applied a cross thepmJeeted area of the component Poslflve hydrodynamic forces act in 

the radial, outward dhmU nand the vertical, upward direction. Selfershall eppy d e radbdlood 

skmulfaneousy In ft radial dbw ton and normal to the radial direct Ion in the horizontal plane. s 

._..a,,,sa..._.. _ 

Normal. Operation Hydrodynamic Pressure Range, psi Number of 

t7avation A Elevation B Elevation C Elevation D Cycles 

Radial Vertical Racial Ver tical Raduil Vertical Radial vaucw 

-0.09 to 0.29 -0.7-6 to 0.43 -002 to 0.22 -001 to 0.40 -0.05 to 0.12 -0.01 to U. -0.03 to O.tO -0.Of to 0.40 20.7X1 

1.60 

1.40 

a 1.20 

1.00 

0.80 

@ 0.60 

rL 0.40 

0.2D 

0.00 

0 11 

rontdl disiaaee from the center of an 

up to the overflow level as plotted: 

Overbfow Loads 

2 3 4 5 6 7 1 8 

7.3 

Horizontal Distance from Center of PJM Nock (ft) 

- H=6R 

9 10 

The overblowpressune aha0 only beapptied to the projected area of the overblowhW pulsejet mb rerin the ver ti cal, upward Wrection acrd to 

all surrounding componentsin the horizontalplane, radiating from the overblowdngpulsejet mixer. Segershati conslderfhatany single 

puisejetmbrer marowerbkw 100 cyGbs 

Notes 

• Cycle Increase: The Salermrutimuasse the numbers of operational cy cl es given above by 10% to accountior commissioning duty 

unless otherwin noted . 

0.60 

0.52 

0.40 

Sheet 4 of 6 DATA SHEET #: 24590-PTF-MVD•UFP430D07, Rev 1

& 


MECHANICAL SYSTEMS DATA SHEET: VESSEL 245904"T-M -UFP-VSL-00062c 

Component Plant item 

Eauittment Cvclic Data Sheet 

PTF-MV-VFP-VSL-W023, P7FMV-U FP-VSL-OW24 P7FMV-UFP-VSL-OD025, PTFMV-UFP-VSL-00069, PTFMV- 

Number. 

Component Descrip tion 

UFP-VSL-00070. PTFMV-UFP-VSL-00084 

I 

Charge Vimsels for the fo ll 

owing RFDS UFP-RFD-00042, UFP4LFA00043, UFP-RFD400",, UFP.RFD.00045, 

UFP-RFQ00046 UFP-RFV-OWa. 

r ne rmmmsnon ôerow rs mravrsronar aneenverones mmerarronarau[v ror ra[wue assessm^[ rare no[m ee usen as ooerauonw cant_ 

Mate rials of Construction ASME SA240 316 with max. Carbon of0.030% ' 

Design Us 40 Years 

Component Function and These c1huge vessels are cyc0caMrboded using vacuum to fully HU Ma charge vessel with process liquid and 

Life Cycle Description compress dairtb fu9y amply the charge vessel. The charge vessels are contained within . a parent vessel with 

varying rr7oid leve l. Theyshalf be designed to cycle bebveen the maximum design pressure and the mfnhnum 

design pressure plus Me external sta ti 

c head In"sedby theparent vessel. The charge vesselsupports shah 

be designed to cycle between fully buoyant (charge vessel empty andparentvessel fulq and fully loaded 

eh vowel fu ll 

and rant vessel em 

Load Type Nn Mau Number of Cycles . Comment . 

Design Pressure prig FV 80 10 Nominal assumption fortestlng 

Operating Pressure psig FV 725 10,400 

Operating 

-F 68. 86 10,400 Parent vessel wig be opera 

Temperature 

ti ng normally at a temperature of 

77OF 

Contents Specific Gravity 1.00 1.26 10,400 

Contents Level I inch Empty Flooded 10,400 


Nozzles -YVMhin B°Fofoperatlrrprem 

we re 

As above 

Supports - Buoyant Loaded 10,400 

Notes 

• Cyde increase: ,The Se0ermust increase the numbers of ope rational cycles given above by 10% to account farcommissfonfnp duty 

unless otherwise noted. 

• DELETED 

Sheet 5 of 6 DATA SHEET #. 2d5g0-PSF-MVD-uFP-PDOo7, Rev 1

I 



2459DJrrFW—UFP.V3f 00062c 

Ecuioment Cvclic Data Sheet 

t om^ t Plant llem Ur-PJM-00073, UFP-P^^M-00070, UFP-PJM-60076, UFP•PJM-00077, UFP-PJM-M76, UFP-PJM-000107 

Component Descrip tion Pulse jet, kon; 

The Informa tion below Is orovisk" and envelooes operational duty for fatinue assessment It is not to be used a$ operational data. 

Mate rials of Construction ASME SA240 316 with max. Carbon of 0.030% 

Design We 40 Years 

Component function and These pulse jetmbrers (PJALV ate cycl ically boded using vacuum to fully 1111 the PJM w it h process liquid and 

Life Cycle Description compressed air to fully amply the PJM. The PJMs are contained wHhin a parent vessel wiM Varying Oquid 

lave/. Thaysba11 be designed to cycle between the maximum design pressure and Me minimum design 

pressue phis the external static heed imposed by the pa rent vessel The PJM supports shah be designed to 

cycle between My buoyant (P.ON empty and parent vessel futo and fully loaded (PJM fu6and parentVessel 

empty) abates. Thrust load shall be applied only to the My buoya nt state. Assume the parent vessel is full for 

SOX oftixr number of PJM cycles, 

, 

Load Type We Max Number of Cy cl es Comment 

Design P ressure psig Af 60 10 Nominal assumption for tes ti ng 

Operating P re ssure prig FV 725 207 x 1 

opera ti 

ng 

Temperature 

T 68 86 10,400 Parent Vessel will op era0ngnotmagy at a tempe ra tu re of 77 

°F 

Contents Specific Gravity 1.00 1.26 107X 10, 

Contents Level inch Empty Flooded Z07 x 10' 

Thrust lbf 0 330 207x 1 


Nozzles Wtihb 9'F of operating As above 

Supports 

tam tie fame, 

Buoyant Leaded 207x f 

Notes 

Cycle Increase: The SeRermustixreass the numbers of opera ti onal cycles given above by 10X to account for commissioning duly 

unism otherwise noted 

DELETED 

Sheet 6 of 6 DATA SHEET li: 24590-PTF-MVD-UFP-POOOT, Rev 1

, 

MECHANICAL DATA SHEET: VESSEL 

Pmisat RPRWTP P81D: 24590-"W-M"0P-P0001 

Pmiect No: 24589 ` 

Process Date Sheet 

PmjectSits: Hanford VesselDrawin9 24590.LAW4MV-L01s-P0001 

DesmPtion: LAW Molter 1 SOS Condensate. Vestal 


24s9o"w•MV-LOP-vsl.00001 

Charge Vessels (Tog Numbers) Not AppOOable ._.. 

Pulsejet ATnters/Agitetos Cre9 Numbers) 2g590.LAWAMLORED°CA0001A ' 

RFDNPMPS . (Tag Plumbers) I Not Applicable .. 

amity Level 

4L-1 

it=r. rarFrfa 

Fabrication SPace 2459o..WrP.3P 

Seiwk t atagay - 

SC-Hl 

Design Cale 

S.A1V00677W1 )q 

servicarConmms LAW Condensato 

Code Stamp 

ASME V111 Div 1 

Yes 

-. 

. 

Design Spedtk Gravib 

Miadmmum Opera 

1.08 NB Registratim Vas - ... 

ti 

ng Vaums Bat 7,402 

weights -(Ibs) 

Lmgbt 

ooeratina 

. 21€t 

Toralvolume 

Wt 9,056 

Estimated 

AcWal ` 

25,500 , 91,700' 100,800 

Inside Diameter I Inch 144 Wind Design Not Required 

LengtNFleight (TL-TL) Innis 98 snoe, Deslgn Not Requbed . 

Vessel . 

OoeraUna 

Vesai 

l^gn 

Coi IJacket 

Delon 

Seismic Design 24550-fNTP-3PSJMV00.'7p002 

24590-N7P-3PS-FW1-70001 1 

Internal Pressure psis 2.00 15 125 Seismic Base Moment Mte 

e temal Pressure prig 200 FV. FV Postweld satTrat Not Required 

Temperatu re IF 212 237 237 Carmsion A ga mca Inch O 08 vessel (Note 5), 

`Q04Jadret t 

Min. Design MatalTanP• °F± 40 Hydn%gtic Tag Pressure •` Pais 

Note: Please note that source, special nuclear and byproduct materials, 

as defined in the Atomic Energy Act of 1954 (AEA), are regulated at 

the U.S. Department of Energy (DOE) fiedlities ex clusively by DOE 

acting pursuant to its AEA authority. DOE asserts, that pursuant to the 

AEA, it has sole and ex clusive responsibili ty and au th 

ority to regulate 

source, special nuclear, and byproduct mate ri 

als at DOE-owned nuclear 

facilities. Information contained herein on radionuclides is p rovided for 


F tP. 

TP PDC 

O4 VASy 

R `6 '" ^QA 

^ ^ 3^ 14(ns 

ac3a952 c 

O+t OCISTBA^ 

A'T`9J®NAL 801 

EXPIRES 12/10/O(p 

This bound document contains a total of 2 sheets. 

1 Issued for Permi tting use 31^ os 

D. Issued for Perrnittirg Use dghtmen S ee C. Slater em 1 127104 

Rev. Reason for Revision I By Checked Review Approved I Date 

Sheet 1 of 2 DATA SHEET #; 24590-LAW-MVD-LOP-P0004, Rev 1 

NOW 

R1050739t

MECHANICAL DATA.SHEET: VESSEL 

Matarials of Cnnstnnctlnn 


24590' Aw4wv.LOP-vsL66g°1 

'al Minks TNcknm Size Cords it nt 

Tap Head SIB-573 N06022 Sae Drawing AMOMMY 

Shell - SB.575 M0110= See Drawing Primary 

Bottom Head - . 36575NOI1022 Sea Drawing Primary 

Support . SAM 304 (Nate 1 6 6) Sae Drawing NIA -. 

Jed otcolafti pipe Jacket SA312 304 (Note f) See Drawing NIA 

Mtemab S&M MOOR221 SD-622 N06022 See Drawing Thoninoteelis Primary 

(Note 7) ZIN 

pipe (Seartdm) - SBwM N06022 6 38.622 N06276 

(For i 112' d 2-Pipe) I SA-3f 2 

TP304 

See Drawing - - Mote 2 _ - 

ForB!no. BerstD& 

Gadals:(0 Rena) .. 

eolfin9 .. 

60.564 AMO221 SA 182F304 

DRIDM . ` 

-SA-193 Or. BON I SA-194 Gr. 8M 

See Drawing. 

NIA 

MA 

M.UI 

MA 

NJA '.. 

Miscellaneous Data - 

Odamalron..... .. _. ..Vertical 

Support Type _.. skirt . :. . 

tnsubbonFuution Not AppiMabM ... 

InwWtion Material Not Applicable 

-. insulation Tltidmast: (..h) Not AppOeab/e Inlemal Finch Descalted as labs 

.. edmuil Finish Note 3 

' To he determined by Me vendor. 

Note 1. Material shall have Carbon Content of 0.030% Max Mon-weided specialty items are excluded here this 

ragnGamsrrt. 

Mote atiVoale necks belowearaai operating level are Primary, others AmcMary. See PVDP and wasse( dmwhv for MDT. . 

Note M Shell welds under haNp4m calls to he ground smooth. Others desealed as Mid, 

Mote* Contents of this document are. Dangerous Waste Permit affecting. 

Note Sr Corrosion a0awamee of O.Ofais also to be added to the external surface of shell under the Jacke6 Q 

Mote 6. Use SA-24"16 material for skirt and base chair gussets as design change by SDDR No. 24590 ,-WTP4DDR-PROC- 

0"0936 f 

Note 7e Use Ibata/lay C-276 In Rau of MasteRoy C-22 material for removable eductor guide none as reference by SDDR No. 

2459g`NRRSDDR'PROC-04-01080. 

Deleted 

Equipment Cyclical Data Sheet 

Sheet 2 of 2 DATA SHEET #: 24590-LAW-MVD-LOP-POOD4, Rev 1


, MECHANICAL DATA SHEET: VESSEL 2e5g°^°n'^tttrrc°P`vs^ °°°°2 

Project RPP•IVIP P81D: 4590"W411&LOP-P0002 

2 

Protect No: ELF Process Data Sheet 

Protect Sde: Ha~ Vessel brewing 24590, A 1*411 V^LOP,P0002 

DOSM)Dom LAW ^6fe1Mr 2 s8s Comlensateyessel 


charge Veseets (Tag Nunn Not APPROatb/e - 

Pulsejatt,Tzars/Aghalois (te9NUmbere) 24590.1AW4fY-LOREOU0 000024 

RFDVPUnps(Tag Numbars) Not AppBeab/e - 

Desion Data 

Drrelfi/.Lewfl QL-1 Fabrication Specs 2459D•WrP-3PS-INVOO-TPOO1 (PVDP). 

Seismic category SGIR t - Des ig n Code ASME VII/ Div 1 . 

Servicercontents ..- LAW Condensate node stamp Yes 

Design specifloc—Ay 4.03 - NE Registration Yes . 

hiamnum DOereang Velours gel 7,402 Weights (ft) Emury. CoemOng Test 

Trial Vdume . 981 9,056. .. - 564mated 25y500 9f,700 100.800 

Inside Diameter Inch .744 Wavl Design Not Required 

LenglUHeigN (TL-TL) indr 98 _ - snow Design Not Required 

Vessel 

Ooerearw 

Vessel 

Design 

-CoieJaciwt 

paskin 

Seismic Design 24S90.4VTP-3PS4WV00•TP002 

245904VTP-3PS-FR81-T0881 1 

Intemal Pressure. 

Exte 

psig 2.00 is 125 seismc ease Moment: Wb 1, 

.. . 

rn al Pressure psig -2.00 FV .. PV Posnreld Heat Treat Not Regalred 

Tempereture -°F 212 237 237 Condsicn Albwance IIIKh 0.06 Vessel (Note 5). Q 

Mgt Decign Atetel Ted. 

'F 

40 Htd^tic Test preasure' ps9 

&04Jaeket t 

actual. 

Note: Please note that source, special nu cl 

ear and byproduct mate ri 

als, 

as defined in the Atonic. Energy Act of 1954 (AEA), are regulated at 

the U.S. Department of Energy (DOE) facili ties exclusively by DOE 


AEA, 7t has sole and exclu sive responsibility and authority to regulate 

source, special nuclear, and byprodu ct. mate ri als at DOE-owned nuclear 

facilities. Information contained herein on radionuclides is provided for 


I I 

0 1 

Issued for Pemrining Use 

! , 

ef2L 

t8 

HPRW POC 

tRE3 t 2lt O/ore^^^ 


A /I / 

13h-'1Q5 

issued for Pemirling Use ' tman Lee C. Slater IM/04 

Rev. Reason for Revision - By Checked Review Approved Data 

Shoat 1 of 2 DATA SHEET #: 24590-LAW-MVD-LOP-POOOS, 

Rev 1 

JI I 

R10507 

OS


, MECHANICAL DATA SHEET: VESSEL 24SM"W-NVd.OP•VsL-WW2 

. 

Campo 1 


IftftmThtknm Mm t 

Top Head S8.575 M06022 See Drawing AuxiDa 

SWI Sg-575 N06022 Sea Drawing Er-IM y 

eotlem PAM 58.575 M06022 A See Drawing Primary 

Sappon SA-240 304 (Note 14 6) Sea Drawing NIA 

JadmtfOoftHaK-Plpa Jaolmi SA-312304 to 1) See Drawing N/A 

tn[etnals S8475 M7f,40221 SO4221106022 

(Nate 71. 

- Sea Drewhig Tbermowallsprimary 

Pipe (Seamless) - SH-522.W622 & S8,622 11011276 

(For 1112- 6 2- Pipe) 12"12 

TP304 

Sea. Drawing . Note 

Por9ingW Sffi amdc S"9411060221 SA 152 F304 see Drawing NIA 

Gaskets (0Ifing) EPOMN - NIA .. MIA 

Boning SA-193 Or. 8611 / SA-194 Or ON NIA ..' NIA 


Orientation vertical - .SuPPaiType. - Skirt. - . 

Insofation Funedon Not AppDeab/e. Inn ietion mats" NOfAppBpble 

msumdon Thiokress paeh) .. Not Applicable. _ Intemal Fddsh Descaledas laid 

- Extemai Finish Note 3 

KemarKs 

To be determined by the vendor. - - - 

Nate 1r Material shall have Carbon Content of 0.030% Max..Nomweided specialty items are excluded here this 

roquiremant. 

Note 2-- Nozzle necks below annual operating level are Primary, others Auxilfary. Soo , PVDF and vessel drawing for MDT... 

Note 3. SWR wells under hate pipe cells to be ground smooth. Others descoled as laid. - - 

Note 4r Contents of this doemnsnt.w Dangerous Waste PurmR affecting.. /^,\ 

Note s: Corrosion allo"nes of 0.01s Is also to be added to the external surface of shag under the jachetA 

Note 6r Use SA440 16 metertal her skirt and base chair gussets as design change by SDOR No. 245904VTP-SODR-PROC• 

04-00936 

Mato 7: use HasteBoy 0.276 In gas of Hastelloy C-22 nwterlal forremovabhe inductor guide cone as reference by SOOR No. 

245994YiP-SDDR-PROC-04-01081 

Deleted 


Sheet 2 of 2 DATA SHEET #: 24590-LAW-MVD-LOP-P0005, Rev 1

EXP1RE612/te/oto 

05 

RIO 5703 

MECHANICAL DATA SHEET: VESSEL ' PLANT ITEM No. 

24590-LAW4NV-RLD-118L-00005 

Project RPP-WTP P&ID 24590-LA -bl6-RLD-P0001 

Prryect No 24591D Pmcsss oats Street Deleted 

PmjectSha Nanlord Vessel Drewirg 24590-I.AW-W4ff a-P0008 

Description SES r andeasate Collection Vessel. 

Charge Vessels (Plant Item Numbers) Not Applicable 

Pulcejet Morels rel (Plant hem Numbers) ' Not AppBcable 

Kererence uata 

Desian Data 

Qua lity Level CN Fabrication Specs 24590-N7F-3PS4WVOO-TP081 

SeismiccategWy SC411 Design Code ASME Viii Div 1 

Senrka/Contents SOS Purge ER/aents Code stamp yes 

. NS Registration yes 

Design SPWAC Gravity 1 to 1.38 weights (106) FmDN Ocerafino Test 

Opereting Volume gel 23400 Estimated 67,700 348,800 283,000 

Toral volume gat 25780 Actual' 

Inside Diameter inch 192 wind Design Not Required - 

LengtNHeight inch 185 (See Vesselarawing) Snow Design Not Requbed 

- 

Vessel 

oweratirm 

Va35el 

DaSIM 

Csi i/Jacket 

Design 

Seismic Design 2459O. W7P4PS-M1-7D001 

245-4&WrP-3PS4WV00.7P002 

inamal Pressu re prig O 15 NfA seismic ease Moment* ft'lb 


Tempsabse 

pdg 

.F 

2.6 

167 

15 (FV) 

200 

NIA 

NIA 

PoslvreW HeatTreat 

Corrosion Aibwante 

Not Required 

inch 0.04 

Min. Design Metal Temp. T 40 Hydrosta tic Test Pressrae * ps19 Note: Please note that source, special nuclear and byproduct mate ri als, 

as defined in the Atonic Energy Act of 1954 (AEA), are regulated at 

the U.S. Department of Energy (DOE) facilities exclusively by DOE 

acting pursuant to its AEA autho ri ty. DOE asserts, that pursuant to the 

source, spe cial nuclear, and byproduct materials at DOE-owned nuclear 

facili ti 

es. Information contained herein on radionuclides is provided 

for process descdptk)n purposes on ly. 

RPWMWPOC 

This Bound Document Contains a total of 2 Sheets. 

2 3 ^5 Issued for Permit ting Use 

1 11/12/03 Issued for Permit ti 

ng Use Jackson P. DeGraal C.Slater ffmann 

0 9/17/02. Issued for Permit ti ng Use J. Jacks on C. Slater WA S. Kirk 


Sheet 1 of 2 DATA SHEET # 24590-LAW-MVD-RLD-P0006, Rev. .2 

^

MatartAin of Cnnnin,efian 

Component Material I' Thidmess I Size i m 

Top Head and Tap Head 

Norr)e Re-pads 

SA240 3161&4162 f316 with max 

Carbon of 0.030% 

See Drawing Auxl6ary 

Top Head Nozzec N01, NOZ 

NO , NO3, S,îN N16 NIS& 

NNI& NiL NI5, th, N76A 

18. N19 N20,nd a N20A 

TOP Head Noses NOS, NOT 

NOS. N70, and N17 

3 11688 AIMS M08367 or 

56622 N10276 Seaa/ 

les, 

121 

SA240 316ISA18210316 with max 

Carbon of 0.030 % 

See Drawing 

bee Drawing 

-. AuxlDa ry. Noted 

Amd hoy if lote•1 

Top Feed NIZN13.. SM22 N10276 Seamless See Draw ing Auxi►lary,:Noto-1 

and 

Nt 

MECHANICAL DATA SHEET: 'VESSEL 


24590d,AW4"-RLD•VS40000S 

. 

Bottom Head 

SS888 UN& N08367 

S8688 UM N08367 

See Drawing- 

See Drawing 

Primary, Note.1 

Primary 

SaPW SA290 30 w/th max carbon of 

0.030% 

- See Drawing NUI 

Intemafs UNS NC8367 

. -O'. Fft Fengeg . UNS N08367 

'0-wnO caske ts Parker E0540.80 A 

eat raskeu EPDM - 

See Drawing Primary- 

See Drewhrg - As Note-1 for Mazzle Necks 

Sao Drawbrg As Note-1 for Noah Necks 

- .. . 

Batting (For Fl anges) A193 Or. 83 CL ! -See Drawing NIA 


Odentatma .. VertMal Suppo 

n 

rt Type SMrt. . 

Insufatan Fwxfion Not AppBcable mutation Material Not Applicable - 

m alaUm TNW"aa (nch) Nof plleabla welds 5tat" Hash De-scaled as Laid 

. - nOIBa 

' To be determined by the vendor. . 

Note 1: Nozzle Reefs below the high operating )!gold hwal are Primary, others AuxDiary. 

Note 2' NDH -for thle vessel most meet requirements Per paragraph 6.4.2 of 24590.W7PJPS^MV00-7 10001. 

Note 3: This vessalIs not subjected to thermat CycDng or pressure cycling. 

Note 4: Vessel volumes are approximate and do not ac mmnt for manufacturing tolerances, ozdes,.and displacement of 

hntamals. . 

Note 5: Contents of this document are Dan us Waste Permit aReaUng. 

Sheet 2 of 2 DATA SHEET # 24590-LAW-MVD-RLD-P0006, Rev. 2


Project RPRWTP P&ID: 24590.LA CP-P0001 

Project No: ^rg11l Process Data S heet Deleted 1 

Project Silo: 111arNord vessel Drawing 24590-LAW-MV-LCP420001 - 

DescrOon: LAW 1?oneentrate Receipt yessW i 

RBterence Data 


10505709 

24590 LAW-MV-=P-VSL-09091 

Charge Vessels (Tog Num bem) Not Applicable 

I 

Pdsajet ASurers /Agitators (Tag Numbers) I Not Applicable t 

RFDS/Pumps (Tag Numb (31 s) . 

I Not Applicable /1\ onion oata 

Duality level CH (Note 3) fabhcelion specs. 24590mm3PS-MVOO-TP001 (PVD t 

Seismic Category SC411 Design Code ASME VID Div1 

SeMcelconterds LAW Concentrate Feed Code stamp y" 

Design Specific Gravity 1.47 NB Regis tr a ti 

on yes 

Mmmum Opere fing Volume gel 15,,1135 weights (Ibs) ^ Doeralim I 

Tdat Volume Bat 18,130 Es ti 

mated 49,200 235,700 199,900: 

Inside Diameter 

Lenriffln'teight (TL-TL) 

Inch 

Inch 

168 

153 

Wind Design 

Snow Design 

Not Required 

Not Required 

. 

Vessel 

cIPOM 

U 

vessel 

past 

Coil/Jacket 

Deslan 

Seismic Design 24590-WTR3PS4WV00.7P0O2 

24590-1111FTP4 F801-T8001 

Intarraw Pressure psig' 0.07 1S' None Seismic Base Moment' ftID 

F^demal Pressrae 

re 

Temperatu 

prig 

.f 

4.08 f 

122 - 

Fir 

ISO 

Nerve 

None 

:Pastweltl NeatTreat 

Corrosion A llowance 

Not Ragglretl. 

Inch 004 

. 

MIL Design Metal Temp. T 40 HydrostarboTest Pressure' Psig 

Actual 

Note: Please note that source, special nuclear and byproduct mate ri 

als, 


the U.S. Depa rtment of Energy (DOE) facili0es exclusively by DOE 

acting 

pursuant to its AEA authority. DOE asserts, that pursuant to the 

AEA, O has sole and ex clusive responsibility and authority to regulate 

source, special nuclear, and byprodu ct materials at DOE-owned nuclear 

%c0ities. informa tion contained herein on radionuclides is provided for 

process desc ription purposes only - 

r- _AJ&ALftAft_ 

EXPIRES 12/10/0 

1 I Issued for Permitting Use 

5 

ISSUED BY 

PDC 


o Issued for Permitting Use . Jadtson S. a C. Slater e. Vn 12! /03 

Rev. - Reason for Revision By C2recked Review Approved Date 

Sheet I of 3 DATA SHEET #: 24590-LAW-MVD-LCP-POOD4, Rev. I


W I-- --- 


^^^'-LCP6V$-00001 

Materials of Constructian 

t riel Inimum /Size CorOn 

Top Head SA-240 316 (Note 1) See Drawing Aax9lary 

SW SA-240 316 (Mote 1) Son Drawing Printe ry 

Bo ttom Heed 8A-240 316(Nots1) See Drawing Prtroary 

support SA-240304 (Moto 1) See MIA . 

JadmVCdWFar.-Pipe Jzd* MA NIA t MIA 

Internals SA440 316IS4312 7P316 (Note 1) See Drawing TlwnnowN/s Primary 

Pps 84312 TP316 Some t"s, (Mate 1) Drawing Moto 2 

ForgkW Ber stock -182 F3 t8 ote l) See Drawing .. MIA . 

Geskets (0 Ring) EPOM t I MIA 

Bolting SA-193 Or. B8M I SA-194 Gr- 8N + M'IA I MIA 

Miscallananus Data 

Orientation Vertical Support Type Shot .. 

kaulatlon Funo5on - II/01 APPDea6/e Insulation Matelot MOt 

IriaUlatfon Thicmess (irrdr) Nat jaa6/a Imemal Finks -WOlda deiCBled as Ladd 

6nerral Frdsh Welds doscaled as fadd 

neumr na 

To be dotsrmhed by the vendor. 

N 1r 14taterhd shag hew Carbon Content of 0.030% Max. ... 

Mon welded sper4aky items are excluded from tuts 

_.. rsqubemeaf. 

Mote 2. Mane tracks below normal opera ting level we Primary, Wham 'Ivry. Sae PVOF and vessel drawing for MDEL 

Nob 3r Adif thmal AWE requirements should be as per 6A of the PVDFr i 

Mote 4: Contents of this douaument are da^gersas wade permit. + 

Sheet 2 of 3 DATA SHEET 0: 24SM-LAW-MVD4LCP-P0004, Rev.1


Eauiioment Cvclic Data Sheet Q 

Component Plant Item 24590-,111*-MV-LCF-1131..00001 

Number: 

Component Description I Parent Vessel 

PLANT REM No. 

2459*"w'-f"-LCP. VSL.OoOo1 

Tea MTddnadml ft b is tlrdVl3 sj add Plr nes mlerAdedar. dury Mr MM,,A R4CRICtIIIalIf d k mM M M ud Ae nnera'Rnrrar i! b 

Materials of Construction SA-240316 - 

Design Life 40 years .. . 

Component Function and 

UfaCycle Deeeri lion 

Equipment Shut Down for maintenance oeems annaagy. - 


Design Pressure psig FV 1s 100. 

. 

Operating Pressure psig ..409 0.07 100 Maz/nnua of 100 startlstep Cycles. per 40 years of 

design Igo 

Operating 

Temperature 

•F: 59 122. 100 

Contents Specific Gravl'ly 1.0 1.17 100 

Contents Level inch 31.00 170.00. 100 


Nozzles- Wftlrle W F of vessel 

tenweratare. 

. As above. - 

Supports Same as vessel Humber of cyc4es some as vessel 

Notes 

• Cycle Increase. The Selformust Increase the numbers of operational eyeles given above by 10% to account for 

commissioning duty unless otherwhre noted. 

Sheet 3 of 3 DATA SHEET M 24590-LAW'; MVD-LCP.POW4, Rev.1


Project" RPP4" Palo. 24590-LAW4M6-LCP4V002 

Project No' 24590 Process Data Sheet. T DS 

Project Sitar Hanford V95MUMAling 2459&LAW411V-LCP-P0002 

Description: LAW Concentrate Receipt Vessel t 

log 


R10505710 

24590-LAW4MV-LCP-VSL-00002 I 


Charge Vessels (Tag Numbers) Not.Appllrable 

Pdsajet Mixers /Agdatds (Tag Numbers) Not AppOcable t 

RFDWFUmps (Tag Numbers) - Not AppBeable a. 

Desion Data 

Quality Level - CM (Note 3) Fabrication SPecs 24590-W7P-3P"V00-TP001 (PVDF)ft 

Seismic Calegm SC-RI Design Code ASME WIi Div I 

sovimComents LAW Concentrate )Feed Code Stomp Yes 

Design Specific Gravity 1.47 NS Registration Yes 

Maximum Operafin9Volume gal 15,435 Weights (lbs) -Empty I QDfusin Test 

Tots[ 1901 18,130 - 

_ 

Estimated 

- Actuat e 

49,200 1 235,T00 

I. 

199,900 

F 

inside Diameter Win 

.168 Wind Deegn Not Rowdired 

t engumeight (TL-TL) inch 153 - Snow Design Not Required 

Vessel 

Ooeratira 

Vessel 

Design 

CoiVJadcst 

Desin 

Seismic Design 24590-W7P-3JaS4WV00-77a002 

24590-W7P-3PS-FB0f-TO0e1 

Internal Pressure . 11559 0.07 f5 None sesmic ease Mornent' R°Ib 

EMamal Pressure PS19 4.09 t FV None Postwdd Heat Treat :Not Required 

Temperature - 

°F 

122 150 None Cmrosim ANowahce :Indr 0.04. 

Mar. Design Metal Temp.. °F 40 7p49 

Hydrostatic Test Pressure * 



the U.S. Department of Energy (DOE) iacililies exclusively by DOE 


AEA, It has sole and exclusive responsibility and authority to regulate 

source, special nuclear, and byproduct materials at DOE-owned nuclear 



EXPIRES 12/tolee. 

ISSUED 

RPR*f t BY 

PDC 

This !wand 

document contains a total of 3 sheets. 

n ., . 

1 I Gssued for Pemritfing Use 7 

o' issued for Pemtitting Use / . Jackson S. Ae - C. Slater em - 12/29/03 

Rev. Reason for Revision I By Checked Review Approved Date 

Sheet 1 of 3 DATA SHEET #: 24590-LAW-MVD-LCP-P0005, Rev. 1

PLANT ITEM -L 

, MECHANICAL DATA SHEET: VESSEL za69acaw-MV-I.cP-vsc-9000z 


connoorent Matsfial Minimum Tfi / Size 

Tap Head SA-240 316 (Note 1) see Drawing Auxiliary 

Shot sA-240 316 Note 1) See Drawing Primary 

Bottom Head SA-240 3f 0 (Note 1) See Drawing Primary. 

Support SA-240 304 (Note f) see qmwhw MIA 

JackenCols/Harc-asps Jacket NA MIA i MIA 

Intemais SA-240 3161SA-3f2 TP316 (Note 1) Sea Drawing Thermowaitr Primary 

Pipe SA-312 TP316 Seamless (No 1) See Drawing - Note 2 

Far9in8e' aar sods SA-182 M 6 (Note f) See Drawing I MA 

Gaskets (o Filing) EPDM l NIA MIA . 

Sotinp s it -193 Or. BBM / SA-194 Or. 8M t NIA NIA 

Orientation Vertical 

macs lananus Data 

Support Type skirt 

ImWation Function Nof Applicable Insulation Matens! Not Appsaaws 

InsulationThIckness (inch) No! Applieabie Interne Finish Welds desealed as laid 

External Finish Welds desee/ed as Iald- 

Remarks 

..To be determhred by the vendor. 

Note fr Material stroll have Carbon Content of 0.030% Max. Nors welded speciaNy!ferns are excluded from this . 

regeiremenrL 

Note 2.° Nozzle necks belownonnal operating !oval are Primary, others A 8lary. See PVDF and vessel drawing for NDEA 

Note & AdMianal NOE requirements should be as per 6.4 of the PVDF. i 

Note An Contents of this document are dangerous waste pewit affeotlps. t 

Shoat.2 of 3 DATA SHEET #: 24590-LAW-MVD-LCP-POOD5,Rev. I


Component Plant Item 

Number. 

2as9o-LAW41fV-LCF-VSC-00002 Componea Desc ription Parent Wave! - 

Eauloment Cvclic Data Sheet A 

PLANT 90-ILA EM No. 

^^^t W-^+tf-ccF-vsa°a"oz 

T MrnnnAnnn NW la NnVI nal one itls not to be usedas operallonaldsts. 

Materials of Cons truction SA-240 316 


Component. Func tion and 

Ufa e. Description Equipment Shut Down for maintenance ocean annually. 


Design Pressure psig FV 15 100 

Operating Pressure psig -4.09 0.07 100 .. Waxin um of 100 startistap cycles Per 40 years of 

design we 

'F 59 122 100. 

Operating 

Temperature 

Contents Speratic Cravity CAD 1.47 -. 100 

Contents Leven -. inch 31.00 170.00 100 


Nozzles Within 50- F of vessel 

-temperature. 

As above. 

Supports - Same as vessel Number of cycles same as vessel 

Notes 

• Cycle Increaser The Seller must increase the numbers of operational cycles given above by 10% to account for 

commissioning duty unless otherwhm rat" 

Sheet 3 of 3 DATA SHEET #: 245904LAW-MVD-LCP-P000S, Rev. i



24390,LAw-LFP6 V 3L40002 

Priem 

Pmject No: 

RPP•WTP 

24590 

MID: 

Process Data Sheet 

24590-1A 

.palms.. 

6-1.P 001; 245MW AW-M 4FP MM2 

y eS 

project dect Sue: Hanford vessel 24590-GAW4"4PP-PDoo1 

Descdplim McRar 1 Peed VessM. 


Charge Vessels (rag Numbers) Not AppMeable 

Pulsaist Vmrs f Agltatm; (rag Numbers) LFP AGr-00002 . 

RFDsrPumps (rag Numbers) LFP4WP-00007, LPP•PMP-00005, LFP •PMP-00009, LP113-PMPA0010, LFP-PMROOO11, 

LFP.PMP-MIX LFP•PM113-00002 

Spray Nazzies LFP-NOZ-00003,< LP OZ-0000 UP-AFOZ40005..... 

Desian Data 

Ouarity Level CM {Note 41 Fabrication Specs 24590.111117110-alls"V00.7P001 

Seismw Category SC411 Design Cade ASME Vill Divl 

Somms/Contents LAWMalter Feed Code Stamp Yes 

Design Spedgc Gravity 1.90 NB Registration Yes ._ 

Maxemum Operating Vadrme 1 9d 7,869 - Weights (Ibs) 9M raft 1IMA 

Tots Vdums 

gal .9,123 Edmated 44,500 164,600 120,000 

Inside Diameter .inch - 132 - Wind Design Not Regrdred 

LangthMaight(rL•TL) hM 128 Srww Design Not Required 

Vessel 

i n Cmi/Jadeet 

Design 

SeismicDesign 241190-WTP•3P3-MVOO-TP002 

24S90.WTP-3PS-FB01•T0001 

internalPressure Pali; 15 Novo Seismic Bees Momenta fpg 

loYL 

External Pressure. prig 7 FV Nona PosMeld HeatTreat Not Required 

Tempaaflure •F 150 .None CortasioAlbwance 0.04 Top Head 

0.125 Shoff4BtmHead 

• HydmstatieT'at Pressure . Pd8 

Actual. 


as defined in the Atomic Energy Act of 1954 (AEAJ, are regulated at 



AEA, it has sole and exclusive responsibility and authority to regulate 

source, special nuclear, and byproduct matedais at DOE-owned nuclear 

faclTities. Information contained herein on radionuclides is provided for 


1 I Issued for Permitting. Use 

l 

Memo o 

PDC 

EXPIRES 1211010(p_J1, 

This b umd document contains total of 2 sheets. 

131 15 

0 Issued for Permitting Use . Jadmon % C. Slater ELVern 1 12PL9/03. 

Rev. - Reason for Revision By Checked I Review Approved I Date 

Sheet 1 of 2 DATA SHEET #: 24590-LAW-MVD-LF1p-P0007, Rev. 1 

05

1 



24690-LAW4-FRVSlr00002 


Component materw e era 

Top Head SA-240 316 (Note 2) S" Drawing Auxiliary 

Shea SA-240 316 (Note 2) See Drawing Primary '. 

Bottom HW . SA-240 316 (Note 2) See Ornwlmg Primary. 

Support SA-240 300 (Mote 2) See Drawing MIA 

JackatlWSMa&pipe Jacket N!A NIA t M&4 

mmmals SA-240 316 (Note 2) see Drawing Thennoweils Primary 

Pipe (Swmess) SA412 TP316 Seamless (Note 2) See Drawl Note 3 

Forgingsl ear stook M482 P316 (Note 2) See Drawi MIA 

Gaskets (6 Ring) PPOM tlRFng N/A - NIA 

Bolting SA-193 B8M I SA-194 8M I NIA NIA 

Miscaliannmus Data 

Onemaloo vertical Suppott7ype Skirt 

Insulation Funcgon - NotAponcable fnsWation Maferra Not APPOrnble 

ImOlelion 7Hckrress Pnch) Not App6oablo Interval Finish Welds deseahrd as iald 

Fxtemal Finish Waids resealed as laid 

Kamer" 

• To be daterrahme by the vendor. 

Note 1: belated. 

Note Z.Materlal shall hem Carbon. Content of 0.030% Max. Noe-welded Hans are exehated from this rarrImman t. 

Note 3: Mazda necks be lo w normal operating level are Primary, others Auxiliary. See 26390-WTP-3PS4"MO-TPOOf for 

Note At Additional MDE requirements should be as per 6.4 of 245904VTP-3PSMV00-TP*01. 

Note S: Contents of this document are dangerous waste Parmit aMeavag. 

Shoot 2 of 2 DATA SHEET #: 24590-LAW-MVD4LFP-POOOT, Rev. 1


PLANT REM No. R 

24590-1AW-LF)OWSL•00004 

4 

Project RPP-IVTP P81D: 245904LA -M64XP4WW3; 24590-LAW4114154AP-P0004 

Project Na 245W Process Data Sleek .ge9e(a} t 51`71%5 

Project Site: Manhwd vessel Drawing I 28590-LAW-MV-LFP4VM 

Desmipfion. Miter 2 Fe" Vessel 


Charge Vassals (rag Numbers) Not Applioable - 

PulsejetMicers !Agitators {Rag Numbers) LFP:AGT-00004 - 

RFDsiPumps (tag Numbers) LFP-PMP-00013, LF1 114W-00014 LFP-PMP°00014 LP10$N0.00016, LF0.PMP40017r 

LFP6PMP-0001$, LFP6PMP-06004. 

Spay Noares LFPWOZ6000104 LPP- 11FOZ-00009, LPRIVOZ-00010 

Dealt in Data 

ooaudy Level CM (Note 4) Fabrication SPecs Z4590.W71 M-3PS 11fV00-TP001 . 

seismto category 

Se^^ceiContune 

Design Spentic GwO 

SGRI 

LAW Maker Feed 

1.99 

- DWgn Code 

Cade Stamp 

NB Regisba6on 

. ASME VIII Div 1 

yes - 

yes 

- 

Maremm Operating Volume gal 7689 WW fta (lbs) Ernoty Ooeragrw T,g6 

Totwvohma. gat 9,123 Eshvated -- 44,500 164y600 120,800 

Actual e' . 

Insi is Diameter I inch 132 Wad Design Not Required 

LenglMteight (TL-TL) inch 926 Srww Design Not Requhsd . 

Vessel 

0mrab 

g 

Vassal 

Deson 

CdgJadket 

Pesim 

Sevsrrm Design 24590AyTP-3PS°MV8a1P002 

Z459GAV7P-1PS-FE01-T0001 

Internal Pressure og 0.07 15 None SeismieBase Moma; 01b 

External Pressure psig. Log/ FV L Mono Posiweld HestTrest HotRoquhed 

Temperature °F g9 150 1 None Cmusim Albxance in 0.04 Top Need 

0.125 Shen d 8tm'Head 

MN. Design Metal Temp. 1:140 HydmsfakTest Pressu re ` I Ps9 



the U.S. Department of Energy (DOE) taclfifies exclusively by DOE 


AEA, it has sole and exclusive responsibility and authority to regulate 




Issued for Permitting Use 

RPRWTp BY 

PDC 

r 1 

04 VASb,, 

!.T r 

4 

0030931 

All. 

I 

EXPIAES 12/10/p!v 


/M - 

0 Issued for Permitting Use . Jackson S. ee C. Slater I Wm 1 

Rev. Reason for Revision - By Checked Review Approved 

!te 

Sheet 1 of 2 DATA SHEET #: 24590-LAW-MVD-LFP-P000B, Rev. t 

03

Materiais of Construction 



Z459a"W4j;,'-V3L4X)0W 

F WartaI I Size Contanxnent 

Top Head SA-240 316 (Nets 2j see Drawing Anaditely 

shat! 301.240 316 (Note 2j see Drawing - Prima ry 

Bothom Head - SA-M 316 (Note 2) See Drawing Primary 

Supped - SA-240 304 (Note 2) Sae Drawing NIA 

JackeUCOilsh 4VO Jacket . NIA NIA f - NIA 

Internals SA-240 316 (Note 2) see Drawing Thermowe8s Primary 

Frye (SmffAM) 301.312 TP316 Seamless (Note 2) See DrawMg Note 3 

Forongs( ear stock SA-182 F316 (Note 2) Sae Drawing NIA 

Gaskets (0 Ring) EPDM O-Idfng NIA .. .. NIA 

8o ft SA-193 BON I SA494 8N NIA NIA 


orientation Vertical SwpOUT1Pe .. Skirt 

Jnsulalkn PunOtien -NOf Appllcsblo Insulafiar Mamrial Not AppDOable 

Insulation TricWass pnch) NotAPPikab/e - IMemdflnish Welds demented as told 

- 6demal Fmish Weldsdesea/ed as laid 

RelmarRS 

• To be determined by the vendor. 

- 

Note 1: Debated 

Note 2r Melodst shall have Carbon Content of 0.030% Nax. Non-welded Items are exeloded from this requirement. 

Nets, 3: Almods necks below normal operaHeN /eve/ are Primary, others Auxifisry, See 24590-W7P•3PS4NV00-TPoo1 for ND 

Note 4: Additional NDE requirements should be as per 6.4 of24390•WTP-3 TP001. . 

Note 5: Contents of this document ere dangerous waste permit aNectiag, t 

Sheet 2 of 2 DATA SHEET #: 24590-LAW-MVD .LPP-P000S, Rev.1 

r


PLANT ITEM No. i R10505r 

24590-LAW-LFP-VS1.40001 I 

Pmiem RPP4VTP - MID: 24590-LA -M6-LFP-P0001; 24590-LAW-M6-LFP wP000 + 

Project No: 24596' Process Date Sheet ,peleted+ 1 7ifos 

Prgectsee. Hanford Vessel Drawing 24590-LAW-MY-LFP-P0004 

Description: Metier 1 Feed Prep Vessel 


Cnarge Vessels {rag Numbers) Not Applicable 

Pulsejet Were I Agitators (Tag Numbers)- LFP-4GT-00001 

RFDsPumps (rag Numbe rs) LFP-PMP-00001A,W laAP-000095 

Spray Noes - LFP-MOZ-00001, LFP-NOZWW2 

Damian Data 

Dualby Level CM (Note 4) 'Fabrication Specs 24590-WTp-3PS•MV00-TP001 

Seismic Catego ry SCM Design Coda ASME Will Div 1 . 

Service/Contems LAWMaIter Feed Cade Stamp Yes. 

Design Specific Gravity 1.90 -. NB Regis tration Yes 

Mayimum ©pereting Volume .gel 7,689 N'a'gbts pbs) EEminty Or>^ô Test 

Total Volume .gal 9,123 - Estimated 37,000 157,100 113,300 

Actual * 

,. 

inside Diameter inch 132 Wind Design `•Mot Required 

LengthMeght(TLTL) inch 126 Snow Design :Mot Requillred 

Vessel 

n 

Wig. 

Vessel 

^ Dasio n 

CdWacket 

Duo n 

Seismic Design '24590-WTP-3111PS41WO.71110002 

34590.4VTP3PS•F601.T0001 

Intemal Pressu re- psig 0.07 15 None Seismic Base Moment ,119b 

Exte rn al Pressure prig 4.09 FV Nam@ . Postweld Heat T re 

at r oil 

Temp er atu re °F 

96 150 Mope Cermsion Allowance - hrch • 9.04 Top Need 

M125 Shoff & Otm Head 

Mm Design MetalTemp, "F 40. Hydreslafic TestP ressure' ,DS9 

Note: Please note that source, spe ci 

al nuclear and byp roduct mate ri als, 

as defined in the Atomic Energy Act of •1954 (AEA), are regulated at 



AEA, it has sole and exclusive responsibili ty and authority to regulate 

source, special nuclear, and byproduct mate rials at DOE-owned nu clear 

facilities. In a tion eo herein onfydionuclides is p ro vided for 

process d 'pOo!!VA , _ 

-$h f o5 

tRPpl*ip B1r 

POC 

EXPIRES 1211151 This 6pucwl doRttment contains a total M 2 sheets. 

1 Issued for Permitting Use 

0 Issued. for Pemritting Use 5. Jackson S ee C. Stater em 12/29/03 

Rev. Reason for Revision By Checked Review Approved Date 

Sheet 1 of 2 DATA SHEET #: 24590 4LAW-MVD-LFP-PO010, Rev. 1



24590-LAW I.FP-Y.SL4XW1 

Top Head 

of Wan al 

SA-240 316 (Note 2) 


Mimmum Thidm 

See Drawing Auxiliary 

inment 

Shel 

Bottom Head 

suppot 

JadWJCdilsiHalf-Pipe JacW 

lntemals 

Pipe (Seamless) 

ForginW Ben stock 

Gaskets (O Ping) 

259h: 

SA-240 316 (Note 2) 

SA-240316 (Note 2) 

SA-240394 (Note .2) 

NIA 

SA-240 316 (Note 2) 

SA-312 TP316 Seamless (Note 2) 

SA-182 F316 (Note 2) 

EPDM 04ung. 

SA-193 UM ISA-194 SAP 

See Drawing 

See Drawing 

Drawing ing 

N/A t - 

See Drawing 

See Orateing 

See Drawing 

NIA 

NIA 

primary- 

Primary 

MIA 

NIA. 

Thermowelis Primary 

Note 3 - 

'N1A 

NIA 

'NIA 

O rientation I VeMlcal 

MlscananentlS Data 

Supper' Type. skirt I 

Insulation.Fundon '. NotAppHpWle - InsWatan Material Net Appllcn 

wo 

Irmemcm Thickness Qnch) Not Appguble inbinal Flnish 

External Emish'. - 

Welds descalad as laid 

Welds desgoled as laid 

Rama, R.l 

' To be determined by the vender. . 

Note 1: Deleted ( .. 

Note 2 Material shelf have Carbon Content of 0.030% Max. Non-welded Items are exeluded'from this requirement. 

Note 3: Noale reeks below normal operating level are Primary, othe rs AmdBary. See 24590.N?P-3PS4MYOo-7Pg01 for ND , 

Note 4: Additional NOE requirements should be as per 6.4 of 24590-N?P-3PS•MY00.TP001.^ : •.. - . 

Note 5: Contents of Ibis document are darmerorrs waste permit alfeeNn9• I 

Sheet 2 of 2 DATA SHEET** 24590-LAW-MVD-LFP-P0010, Rev.1


PLANT REM No. 

105 

24599-LAW-LFXV56-00003 

Pmlxt 

Pmjed Nw. 

RPP-NVTP 

24590 

Paro: 


245 W-&LFP-P0003; A^f 

24590.LAW:At5-1. 

-ladelad' ° 

^. 

Pmiect 5w. Hanhwd Vessel Drawing 245904 AW-MV-LFP-P0005 

Desaiptiow. MBNev 2 Feed Prep V6ssa1. 


Charge Vessels (rag Numbe rs) Not ApplleaWs 

Pulsew Mixers /Agita m (rag Monitors) LFP-AOT-00003. 

RFOS (PUmps Rag Numbers) 

Spray Nozzles 

- LFP-PMP-MWA, L 1FP-PArP400M /1,K. 

LFP.NVZ-OO 05, LFP-M0Z4)0007 

Dastan Data 

CualltyLexel - cM (Note 4) - Fabrication Specs 24590 M BPS-MVMTP001 

Seismic Category . 4910411 Design Code ASME VFH 01r 1 

Service/conlents LAWMNfer Feed Code Stamp yes 

on yes 

Design Specific Gravity 1.90 - NB Registra ti 

MaximumDPera6n8 Vohtme .gal TIM Weq" W) Emov Test 

Total volume gal 9,123 Es timrated 37,000 157,100 713,300 

Actual 

Inside Diameter 

LanggN'Iei9ht (TL-TL) 

inch 

irxtr 

132 

125. 

Wind Design 

Snowy Des ign 

ed 

ed 

vassal . 

Ooemtino 

vessel 

Design 

Coi l/Jacket .Seismic Design -3PS-W00.7P002" .. 

JPS-F801-1tr001 

Pres 

Internal 

sure 


Tamperatme 

13819 

psig 

-F 

0607 

4.09 t 

98 

15 

FV 

150 

Mane 

None 

Nona 

Seismic am Moment` 

Poshseld Heat Treat 

Corrosion Allowance 

- ed 

Top Head 

P0.f2S3h0&Btm;Hmd 

5 Shell S EftM Head 

Min. Desg nMetal Temp. °F 40 Hydmtatic Test Pressusa" 

Note: Please note that source, spe cial nu cl 

ear and byprodu ct mate rials, 


the U.S. Department of Energy (DOE) Fa ci lities exclusively by DOE 

acting pursua nt to its AEA authority. DOE asserts, that pursuant to the 

AEA, it has sole and exclusive responsibili ty and authority to regulate 

source, special nuclear, and byproduct mate rials at DOE-owned nuclear 

facilities. Information contained he re in on radionuclides is provided for 

process description purposes on ly. 

t Issued for Permitt rig Use 

.EXPIRES 12i1Wo4 

RPP" PDC 

This bound oafnent d^ contains a total Of 2 sheds. 

0 Issued for Pemdtbng Use /Jackson C. Slater m 12!29/03 

Rev. Reason for Revision By f Checked Review Approved Date 

Sheet 1 of 2 DATA SHEET M 24590-LAW-MVD-LFP-POOH, Rev. 1 

IS

.MECHANICAL mATA SHEET: VESSEL 

PLANT ITEM P-V 

24s96^,tw.c.P 

•vsi..00003 

Matarials of Construction 

CM=eM M I mein 

Top Head SA-246 316 Plots 2) See Drewhlg Auxl/lary 

Shell SA 240 316 (Nate 2) Sae Drawing Primary 

Bohan Head SA4 0 316 {Note 2) Sae Draadag primary 

Support SA-240 304 (Note 2) See wing NIA 

JadUwCOIwHalf-Rpe Jacket MIA ... MIA Lf MIA 

k"Mals - - S 01-240316 (Note 2) See Drawiag Themnowous Primary 

Ripe (Seamless). SA312 TP316 Seamless (Note 2). See Drawing Note 3. 

Fo,fpngd Bu stock SA•182 MIS (Note 2) See.Orawleg N/A 

Gaskets (0 Ring) - EPON 040ng NIA - . NIA 

Bdtkg SA-193 OW 1 SA-194 8N NIA NIA 

Miscallananus Data 

OdemaUen Vertical Suppat Type Skirt 

Imutaban Fundlon Not Applicable Ins IMM Material -Mot APPRoside 

InsWalion Th'ndmesa (ind,) Not Applicab le Inlemal Ffth Welds descaled as told 

- External Fnish - Welds descaled as laid 

----------- 

To be determ in ed by the vendor. 

Note 1. Deleted. 

Note Z- Natedef shall have Carbon Content of 0.030% Max. Now-welded Items are excluded from this requirement. 

Note 3: Nozzkppecks below ammai cismatinN level are Primary, DOWN Awdfinry. See 2459W WTP-3PS,MVDO-TPDCI for 

NDE. t 

Note* Additional NDE ra Wremeats shoald be as per 6.4 of 245904M.3P3-NVOO-TP0o1. 

Sheet 2 of 2 DATA SHEET #: 24590-LAW4WD-LFP-P0011, Rev. 1

MECHANICAL SYSTEMS DATA SHEET: VESSEL PLANT ITEM No. 

24590-HLW4kfV-HOP-VSL-00903 

Preiact RPP-fyrP PaiD: 24590-HL -MIsHOP-P0006 & 24590-HLW-M6-HOP-P0004. 

Pm)ectNa. 

Project Site; 

x45911... 

Hankird 


Vessel Drawing 

Deleted 

24590-HLW-MV-141OP-P0001 

Damnation: SOS - Condensate RecelverVessel UEDBY 

Reference Data - ..• • `0m 

Charge Vessels (Plant Mein Numbeis) I HOP-VSL-00004AW, HOP-VSL,00101AI6 

Puisejet Mixers/Agitators(Plant Item. Numbers) Hop-PJM-00001,HOP.PJM-00004HOP-PJMA0003,HOP-PJM-00007- 

RFD(s)IPump(s) (Plant Item Numbers) I HOP-RF111-00001A18, HIMP-RF"0002 411I8 

DeSien Data 

Oualtlpd.arel QL.2 Fabrication Specs 24590-WTP-3PS-MV00-TP001 

Seismic Category SERI .Design Code ASME Vill Div 1 

Sevicafoomems 

DesignSpeaficGravity 

Operalin®Volume gal 

Liquid Acidic Condensate 

1.098. 

. 6199 (Note 5) 

'Code Stamp 

NS Registration 

Weights (Its) 

yes 

yes 

Em Oceratlnc Test 

T Voume gal. 9891 (Note 5) Estimated .37,900 111,000 121,000 

- Actual" 42,810 116,070 734,470 

i 

Inside Diameter inch 144 Wind Design MIA 

Leng tlNieight (TL TQ inch 93 1 Snow Design N/A 

Vessel 

aces na 

Vessel 

Design 

CmWadfet 

Descin 

Seismic Design 

_ - 

24590.VY7P-3P5-SS90-T0001 

24590-WTP31e"V00-TP002 

Intsmal Pressure - psi9 Aft 15 65 Seismic ease Mament* F* b 

Extemai Pressum. 

TemperaFwe 

Min. Design Metal Temp.. 

psig 

T 

T 

1.8 

122 

40 

PV 

165 

FV 

165 

PosWeid HeatTreat 

Corroson Allowance 

HydmstalkTest Pressure°" 

l'i Not Required 

Inch MOB Shelf 1 0.04 Jacket 

Psi 






facilifies. Information contained herein on radionuclides is provided 

for process description purposes only. 

EXPIRES {2ft0/c6. 

15 


2 Z 1145 Issued for Pennitfing Use 

1 - 614103 Issued for Permitting Use J Jackson S, ee C.Slater MiMftann 

0 9/19102 Issued for Permitting Use J. Jackson C. Slater NIP; S. Kirk 


Sheet of DATA SHEET #: 24590-HLW-MVD- HOP-P0001, Rev.2 

w 

0 

_


24590-HLV14"-NOP-VS400903 

Matert 


lAmmum Thickness/Size ry 2imne orla t 

Top Head 56575 M06022 See drawing- Auxilia (Note 1),( 

Shall 

Bottom Head - : 

suppod 

88-575 AW022 

$B-575 N06022 

-SA-240 304L 

See drawing 

See drawing 

See 

Primary (Note 1). 

Primary (Note 1) 

drawing 

7arkev2dlsMe 4va&" SA-240316L See drawing 

N/A (100% RT long seams) 

NW 

Intemais (nd. nozzleoerJS) 56575 M06022 1 SS-622 H06022 See drawing 

Thermocouples Primary (Note 1 

Pipe tlnte , Jacket) 8g.622 N06022 1 SA-312 TP316L I See drawing I Note 1 

Fagmgsl BerstaA SB,564.M060221 SA-182 F316L mot, 1 

essel/Jacket 

C^Skels None 

_ 

_. NIA 

Bolung None 

Miscellaneous Data' 

NU{ 

0 

- 

Odentarm - Vertical - .Support Type., Skid .. 

Insulation Functlon None ` Inslation. Material NIA 

Insulalon Th ickness Onch) NIA internal Finish Note2 - 

adernalfiniah - Note 2 

Sheet 2 of 8 DATA SHEET #: 24590-HLW-MVD-HOP-P0001, Rev. 2 

1


- 

24590-HLW-MV-HOP-VSLA0903 

To be determined by the vendor. 

Note 1: All welds forming pa rt of the primary and auxiliary containments, including the nozzle attachment welds shall be 

subjected to 100% voldmalrk examination. Radiography is the preferred method of volumetric testing. !fit is 

considered impractical to perform radiographic examinations the Seller may propose ultrasonic examination..Q 

Note 2: AN welds descaled, asdaid 

Note 3: Normalaratfng Temperature Is 1227, Maximum Temperatu re is 140 F 

Note 4: Deleted 

Note 5: Vesselvolignes are approximate and do not account for manufacturing tolerances, nozzles, and displacement of 

internals 

Note 6. Deleted. 

Note T. Canter s o this document are Dangero Waste Permit affecting 

Note 6: This vessel Is located In a Black Ce//^ 

Note Sch The summary of the hydrodynamic forces for the fatigue case are as fogows:Q 

Summary ofMdrog vnamlc Forces for Normal PJM Operation (Faliguel Cast:Q 

The peak loads given below are calculated based on velocity time histories generated using the CFD model of the SBSCV vessel for 

PJM drive flow of'about 8 m/s. Force time histories were developed (e.g. see Figu re 1) but the results given below a re peak force 

summaries only. 

1) Radial Direction - Peak Forces on Piping (Sch 40) below PJM Nozzle Level: 

Pipe Diameter Peak Positive Force/len th Peak Negative Forcellen 

inches lbflft Ibf/ft 

6 50 40 

4 23 18 

2 7 5 

1 3 3 

2) Radial Direction - Peak Forces on Piping (Sch 40) above PJM Nozzle Level: 

Pipe Diameter I Peak Positive Forcellengili Peak Negative Force/len 

inches I lbf/ft lbf/ft 

6 3.0 1.0 

4 1.5 0.5 

2 OA 02 

i 0.1 0.1 

3) Radial Direc tion - Charge Vessel Peak Force =150 If 

4) Radial D irection - PJM Peak Force = 200 If 

5) Axial (Vertical;) D irection - Charge Vessel Peak Force = 70 If 

6) Axial (Vertical) Direction - PJM Peak Force = 70 If 

7) Axial (Vertical) Direc tion— Peak Forces on Horizontal Piping (Sch 40) 

I 1 

Sheet 3of8 DATA SHEET #:24590-HLW-INVD-HOP-P0001, Rev.2

P 

t 

c 

J 

G. 

a 

s 

. Mgm 1: Total Drag . Loads Per PJM Cycle at Monitor Poi nt 20 

Be low PJM Nozzle Level - Radial DirecOon Q 

1 , 1 , 1® 

®®® 

1.l11 ® 4 ^®® 

11l1t 

1..111 


24590-HIM-WHOP-M40903 

111t : ".11 1111 "111 ^1111^^111 ^ ! 000 

Times) 

Note M. The Hydrodynamic loads given in Note 9 are hounding loads. Q 

Note 11. This Vessel was procured as Quality Level land Seismic Category 1. 

Note 12: The changes implemented by Revision 2 of this data sheet are for 13111 use only. A 

—6-ihch Pipe 

—44nch Pipe 

— 24nch Pipe 

— 14nch Pipe 

' Shoot 4 of 8 DATA SHEET* 24590-HLW-WD-HOP-POOO1, Rev. 2 -

MECHANICAL SYSTEMS DATA SHEET. VESSEL PLANT ITEM No. 

24590-HLW4MWH0P-VSLA0903 

I EQUIPMLNT CYCLIC DATA SHEET 

2 PlantltemDlumber: 24590-HLW MV-HOP-VSL-00903 

3 Plant Item Description SBS Condensate Receiver Vessel 

4 Component Vessel 

5 The information below is. provisional and envelopes operational dutyforfatigue assessment It is 

not to be used as operational data or requirement. 

6 

7 Materials of Construction SB-575 N06022 

8 Design Life 40 years 

9 Component Function & 


This is a `head' tank. It normally operates full. HOP-RFD-OOOOlAB & HOP-RFD00002A/B 

discharge liquid during normal operation and equal volumes of liquid are received by the vessel. 

The vessel is emptied once a day. Washdown is once per year. 

10 Associated Equipment Jacket, HOP-PIM-00001, HOP-PJM-00002, HOP-PJM-00003, HOP-PJM-00007 and HOP-VSL 

00004AB, HOP-VSLOOIOlAlB 

ll 

12 Load Type Quantity Number of Cycles Comment 

13 Design pressure (+veJ-ve) 15 psig / UM 10 - Nominal assumption. 

14 Operating pressure (+vc(-ve) {Atm} / -1.8psi 14235 

15 Operating Tenparature 

(mailm n) 

1220 F / 59° F 14235 Pressure cycles to be at 122° F. 

This is a uniform material temperatur-e 

range, not between adjacent points. 

15 Contents SG (mm/max) 1.000/1.098 14235 

17 Contents Level Empty / Flooded 14235 Coincident with pressure cycles. 

1a 

19 

20 Localized Features 

21 Nozzles 

22 

23 

All nozzles Within 50° F of vessel 

temperature. 

24 

25 

26 

As above. 

27 NOTES. 

• Cycle increase: The Seller must increase the numbers of operational cycles given above by 10% to account for 

commissioning duty unless otherwise noted. 

• CVs inside parent vessels shall have buoyancy effects considered. PJMs shall be smnlariy considered and also the liquid 

thrust effect, Seethe Specification for Pressure Vessel Design and Fabrication, 24590-WTP-3PS-MVO0-TPOOl.A9 

• Fatigue environmental effects assumed negligible. 

Sheet 5of8 DATA SHEET#:24590-HLW-MVD-HOP-P0001, Rev. 2


.. 24590-HLW-MV-H0P-VSL-00903 

I EQUIPMENT CYCLIC DATA SHEET 

2 PlantIteraNumber: 24590-HLW-MV-HOP-VSL-00903 

3 Plant Item Description S13S Condensate Receiver Vessel 

4 Component Jacket 

5 The information below is provisional and envelopes operational duty for fatigue assessment. It is 

not to be used as operational data or requirement. - 

7 Materials ofConstruction ASME SA240 316E 

8 Design Life 40 years 



The jacket provides a cooling duty with cold water when the vessel is in service. Provisional, 

assumption is shutdown once a day. 

10 Associated Equipment 24590-HLW-MV-HOP-VSIr00903 - 

11 

12 Load Type - Quantity Number of Cycles Comment 

13 Design Pressure (+vel-ve) 65 psig / (FV) 10 Nominal assumption 

14... Operating Pressure (+vel-ve).. 60 psig / TV) 14235 - 

15 Operating Temperature 

(may ann) 

1220 F / 59 0 F 14235 Pressure cycles to be at 1220 F. . 

This is a. uniform material temperature 

range, not between adjacent points. 

16 CoatentsSCi(mmtmax). 1.000 N/A 

n Contents Level Empty I Flooded ' 13 3 year maintenance period assumed 

18 

19 


21 Nozzles 

22 All nozzles Within 500 F of vessel 

and'ackettemperatures. 

23 

za 

25 - 

26 

As above: 

27 NOTES. 


commissioning duty unless otherwise noted 

• Fatigue enviromnental effects assumed negligible. 

.. 

- 

Sheet 6of8. DATA SHEET#: 24590-HLW-MVD-HOP-P0001, Rev. 2

iaj 

05-9 MECHANICAL SYSTEMS DATA SHEET: VESSEL PLANT ITEM No. 

1 EQUIPMENT CYCLIC DATA SHEET 

2 Plant Item Number. (Parent) 24590-HLW MV-HOP-VSL-00903 

24590-HLW4"410P-VSL-00903 

3 Plant Item Description SBS Condensate Receiver Vessel - - 

4 Component Charge Vessel HOP-VSL-00004AB, HOP-VSL-00i01A/B 

5 The information below is provisional and envelopes operational duty for fatigue assessment It is 

not to be used as operational data or r uirement 

6 

7 1 Materials of Construction S13-575 N06022 - 

g Design Life 40 years - 



10 Associated Equipment See parent vessel MDS details. 

t1 

This component is part of a pumping system It repeatedly floods and empties. The action is 

caused by vacuum or air pressure being presented to the top nozzle. The surrounding parent vessel 

may contain any level of the fluid between the maximum operating level, and the heel level. The 

charge vessel is subjected to buoyancy forces when immersed in the parent vessel contents. The 

vessel is in cyclic duty 

12 Load Type Quantity Number of 

Cycles 

Comment 

13 Design Pressure(+vd--ve) 32 prig /(FV) 10 Nominal assumption. 

14 Operating Pressure (+v%e) 29 prig f (FV) 2.1 x 10 

15 Operating Temperature 

(max/min) 

1220 F / 590 F 14235 Press= cycles to be at 1220 F and non-coincident 

with temperature cycles. The range given is 

uniform material temperature range, not between 

adjacent points. Typically washdown 1/year and 

shutdowns =13. 

16 Contents s0 (min/max) 1.000 /1.098 14235 

17 Contents Level Empty / Flooded 2.1 x 107 


21 Nozzles 

22 Au Inlet As above As above including pressure cycles. 

23 ! Delivery - As above - As above including pressure cycles. 

Coincident with pressure cycles. 

24 Supports As above As above with contents level changing coincident with pressure cycle. 

Floatation on p arent vessel contents level frequency. 

25 

26 

27 NOTES. 

Cycle increase: The Seller must increase the numbers of operational cycles given above by 10% to account for 


CVs inside parent vessels shall have buoyancy effects considered P7Ms shall be similarly considered and also the iquid 

thnisteffect. Seethe Specification for Pressure Vessel Design and Fabrication, 24590-WTP-3PS-MV00-TP001. 

s Fatigue environmental effects assumed negh&le. 

Sheet? of8 DATA SHEET#: 24690-HLW-MVD-HOP-P0001, Rev.2

a I 


2459"LW-MV-N00.V3L-00903 

1 EQUIPMENT CYCLIC DATA SHEET 

2 Plant Item Number. (Parent)24590-HLW-MV-HOF-VSL-00903 

3 -PlantItemDescription SBS Condensate Receiver Vessel 

4 Component Pulse Jet Mixer (vessel) HOP-PJM-00001, HOP-PJM-00002, HOP-PIM-00003, HOP-PJM-00007 

5 

6 

The information below is provisional and envelopes operational duty for fatigue assessment. It is 

not to be used as operational data or requirement , 

1 

8 

- Materials of Construction 

Design Life 

SB-575 N06022 

40 years 

- 

-. 

9 : Component Function& This component is part of a mixing systent.:It repeatedly floods and empties. The action is caused 

Life Cycle Description by vacuum or air pressure being presented to the top nozzle. The surrounding parent vessel may 

contact any level of the fluid between the maximum operating level and the heel level. The vessel 

is subjected to buoyancy forces when imunersed in the parent vessel contents. The vessel is in 

cyclic duty- 

10 Associated Equipment See parent vessel MDS details. '. 

11 

12 Load Type Quantity Number of Cycles Comment 

13 Design Pressure (+vet-ve) 80-psig / (FV) 10 Nominal assumption. 

14 Operating Pressure (+vd-ve) 58 prig / (FV) 4.2 x ID 

15 Operating Temperature 122° F / 59° F 14235 Pressure cycles to be at 1220 F and non-coincident 

(MU/MM) with temperature cycles. Tice range given is uniform 

material temperature range, not between adjacent 

points. Typically washdown 1/year and shutdowns = 

13. 

16 Contents SG (min/max) 1.000 / 1.098 14235 

17 Contents Level Empty / Flooded 4.2 x 107 Coincident with pressure cycles. 

18 Thrust Load (lb) 252 4.2 x 10 See Note below" 


21 Nozzles 

22 Air Inlet As above As above including pressure cycles. 

23 Delivery As above As above including pressure cycles: 

24 Supports As above As above with contents level changing coincident with pressure cycle. 

Floatation on parent vessel contents level frequency. 

27 NOTES. 


cornmissioning duty unless otherwise noted. 

• CVs inside parent vessels shall have buoyancy effects considered. PJMs shall be similarly considered and also the quid 

thrust effect Seethe Specification for Pressure Vessel Design and Fabrication, 24590-WTP-3PS-MV00 TP00 L 


• ' Thrust loading should be ignored when considering deadweight loading of PJM with empty parent vessel, andshould only 

be applied when considering buoyancy loading of PJM with full parent vessel. Assume parent vessel to be fail for 50% of 

stated number of PJM cycles 

Sheet 8 of 8 DATA SHEET #: 24590-HLW-MVD-HOP-POOOI, Rev. 2

MECHANICAL DATA SHEET , VESSEL 


2459o•HLw4MY-MOP-V8L•00904 

Project BPP-WTP. P&ID: 24590-HL -M6-HOP-P20006 8 HLW-M6-HOP-P20004 

. . 

Project Na .24590 Process Data Shset Deleted' 

Project Site:. - Menlord vessel Drawtn9 2459(l•HLW-MV-HOP-P0003 t8Q 

.Description: Molter 2 SBS Canderrsate Receiver Vessel 


Charge Vessels (rag Numhets) HOP-VSL-.00905MR, 11OP-VSC-00806A1B 

PulsejetMMM1Agltsa=i7a9 Numbers) HOP-PJM-00008, HOP-PJM-00009, HOP.PJM-00010, HOP-PJAf:00011 

RFVSFUmps (Tag MUMI) s) HOMFD•00003AT6, HOPAtFD-00004AM 

Deslan Data 

Oua6lyL" OL-Y. Fabrication Specs 24590• W7R3PSdNV00-TP001 

Seistdc Category SC411 Design Code ASME Vlll Div 1 

ServicetCentenls Liquid Acidic Condensate Code Stamp Yes 

Design Specific (3ravity 1.098. NB RegistratIM Yes 

Weights (ft) EmotV Ooeratino _Test 

Maximum OpestngVdume gal 8,199 (Nate 6) A, 

.Total Volume gal 9,891(llote 6) Estimated 

- 

.Actual*' 

37,900 

4$810 

111,000 

116,07 

Inside Il'ameler kxsr i44 Wind Design Not Required 

Lenglh/Fleight (rL TL) inch 93 Snow Design Not Required 

' vessel 

Ooenerm 

vessel 

Design 

Cot7Jacket 

Desinn 

. 121,000 

..134;47 

Seismic Design 24590-Y17P-3PS•S590-T0001 

24590•W7P-3PS•MV00.7P002 

Internal Pressure Psig Also 15 65 Seisrrfc Base Moment Wlb 

External Pressure psq 1,8 FV FV Postweld FleetTreet Not Required 

Temperature °F 122 165 165 Corrosion Allowance lnan 0.08 Shelf / 0.04 Jacket 

Min. Design Metal Temp. 'F M HydrostatioTest Pressure * Pd9 . 



the U.S. Departmentof Energy (DOE) facilities exclusively by DOE 



facilities. Information contained herein on radionuclides is provided 

for process description purposes only. 

1 " '4 -(0 issued for Permitting Use 

EXPIR ES 121101,6 

r 


0 10/3103 Issued for Permitting Use J. Jackson S ee C. Slater M. Wann 


Sheet 1 of 8 DATA SHEET#: 24590-HLW,-MVD-HOP-P0012, Rev. 1

, MECHANICAL DATA SHEET: VESSEL 


M90-xcw-muxov-vsL-06904 ' 


- anent Malarlial Minimum Thldcness/Size. Continme 

Top Heed SB-575 M06022 See Drawing Anxigary {Note 1) 

' Shell ' SS-575 M06022 - See Drawing ..Primary{Note 9 

Bottom Head S&575 N06022 See Drawing _. Primary (Note 1) 

supper SA-240304L See Drawing N1A 100% RT long seams) 

Jacket/CoalslHat-Pipe Jacket SA-240316L See Drawing - NIA 

Internals find. nozzle necks) SO.576'N060221 SO-622 N06022 -See Drawing Thermocouples. Primary to 1) 

Pipe Qntemal./Jaclkel) S111422 N06022 SA-312 316L See Drawing ' Note. 1 

For&VW Bar stock 

essel/Jacket 

SB-364 ,111106022I SA-182 F316L 

Note 1 

Gaskets 

Bo irg - 

None 

None 

- NIA 

NIA 

- 

.. 

Misaelfanenus Data 

Orientation - vorxeai. SuppoktType Shat 

Insula5on Func6an Nene Insulation Material NIA 

Insulation Funcil ess (mch) N/A Internal Finish 

Fxtemal finish Note Z 

Sheet of 8 - DATA SHEET #: 24540-HLW-MVD-HOP-P0012, Rev. 1



zasso xLw-bw-tfoP vst 00e04 

• ro be determined by the vendor. 

Note * Alf welds forming part of the primary and auxiliary containments, including the nozzle attachment welds shall be 

subjected to 100% volumetdc examination. Radiography is the preferred method of volumetric testing, if It is 

considered impractical to perform radiographic examination,. the Seller may propose ultrasonic examinafian.Q 

Note 2r-All welds descaled, aslald 

Note 3. Deleted 

Note 4: Deleted. 

Note & Normal Operating Temperature is 122 -F, Maximum remperature Is 140 -F. 

Note & Vessel volumes are approximate and do not account for manufacturing tolerances, nozzles, and displacement of 

Internals. 

Note 7.- Contents of this document areDang ?. Waste Permit affecting. A 

Note S.- This vessel is located in a Black Cell 

Note 9. The summary of the hydrodynamic forces for the fatigue case areas foDowsQ 

Summary ofHvdmdvnamic Forces for Normal PJMOoeration (Fatiruel.Case: A 

The peak loads given below are calculated based on velocity time histories generated using the CFD model of the SBSCV vessel. for 

PJM drive flow of about 8 m/s. Force time histories were developed (e.g. see Figure 1) but the results given below are peak force 

summaries only. 

i) Radial Ditecdon - Peak Forces on Piping (Sch 40) below PJM Nozzle Level• 

P' Diameter Peak Positive ForceAcn th Peak Negative Force/length 

inches 117ft lbf/ft 

6 50 40 

4 23 18 

2 7 5 

1 3 3 

2) Radial D irection - Peak Forces on Piping (Sch 40) above PJM Nozzle Level: 

Pipe Diameter Peak Positive Force/length Peak Negative Forctlength 

inches Ibf/ft IbFft 

6 3.0 1.0 

4 1 .5 0.5 

2 0.4 0.2 

1 0.1 0.1 

3) Radial Direction- Charge Vessel Peak Force =1501& 

4) Radial Direction - PJM Peak Force = 200 If 

5) Axial (Vertical) Direction - Charge Vessel Peak Force = 70 lbf 

6) Axial (Vertical) Direction PJM Peak Force = 701bf 

7) Axial (Vertical) Direction— Peak Forces on Horizontal Piping (Sch 40) 

1 

Sheet 3 of 8 DATA SHEET #: 24590-HLW-MVD-HOP-P0012, Rev. I 

ae

I 

L 

c 

L M. 

LL 

.III 

Figure 1: Total Drag Loads per PJM Cy cle at Monitor Point 20 

Below PJM. Nozzle Level- Radial Di rection 

—-- -- - — -- — -- -- — - 

11111 ®®^^1^® 

I IIII ®® 

r I IIII ^® 


....- ^.. 

_ _ f 

1 IIII ®®_ ^'fil^® 

I IIII ^ ^® ^^n :IIII III •IIII 'III 11;111 

nn 

I IIII 

^^.^^• 

.I 

® 

III i 

.r I IIII ^^ ^^^^^ 

L 1011 I _®®^,®- 

.. Time (s) 

Note 10. The Hydrodynando loads given in Note 9 are bounding load I © . 

Note M: This Vessel was procured as Quality Level 1 and Seismic Category 1. 

Note U. The changes hapiemented by Revision 1 of this data sheet are for BNI use only. Q 

^V^ 

PLANT ITEM No.. 

24590-KLW W-NORVSL-00904 

M . 

Sheet 4of8 DATA SHEET#:24590-HLW-MVD-HOP-POO12, Rev. I


.Component Plant Item 24S90-HLW-MV4I0P-VSL-00904 

EDuioment Cvclic Data Sheet 

Component Description M~ 2 SBS Condensate Receiver Vessel 


2459"LWnav-N0RVS"09o4 

The l'Mom/adon below is armishnatand envelopes ooennional duty forfa6aue assessment /tts not to be- used as ooera0ona/data... 

6Aaterials of Construction $8.575 MOS022 

Design Llfe 40 Years 

Component.Fundon and This is a %ead'tank. It is normally operates fall. HOP-RFD-00DD3A/B and HOP-RFD-00004A/A3 

Ufa Cycle Descrpton discharge liquid during normal operation and equal vohnrres ofilquldam received into the 

vessel. 72m vessel is emptled once a ,day. Washdowq, is once per year.. 

Load Type Mtn Max Number of Cycles Comment 

Design Pressure psig FV is 40 Nominal Assumption. - 

Operating Pressure psig .1.8 Atm 14235 

Operating - 

Temperature 

T 59`F 122 14235 Pressure cycles to be at 122 °F. This Is a rrnfform - 

material temperature ranger not between a(lacent 

points. 

Contents Speclfic Gravity 1.00 1.098 14235 

Contents Level I inch Empty Flooded 14235 Coincident with pressure cycles. 


Nozzles - - 

Supports 

Within 50 •F of vessel 

temperature. 

As above. 

A 

Notes 

• Cycle increase: The Seller must Increase the numbers of operational cycles . given above by 10•/ to account for 


• CVs Inside parent vessels shall have buoyancy effects considered. P.lMs shall be sfmllarly considered and also the 

liquid thrust effect. See the Specification for Pressure Vessel Design and Fabrication, 24590-WTP-3PS-MV00-TP007.. 

.. Fatigue environmental effects assumed negligible. 

Sheet 5 of 8 DATA SHEET #: 24590-HLW-MVD-HOP-P0012, Rev.1


Component Plant Item 

Number. 


24590-NLW-MY-NOP-VSL-00904 

Component Description I Jacket 


24590-NLW-MV•N0P-V3L-00904 

TFa tfb.r.nafn.nhulnur :• nmuralnnal aneranfnarnnne nnarafnnai rfiib rnrfafnua aeeaeemaM:. [fit ruff fn ha uead ae nnaratinnal data_ 

Materials Of Construction .. 

SA-240 316L 

Design Us .. 40 Years 

Component Function and The jacket . provides a, cooling duty with cold water when the vessel Is in service. Provisional 

Life Cyde Description assumption is shutdown once a day. 

Load Type Mm. Max "Number ofCydes' .. Comment ,. 

Design Pressure psig FV 65 . '10 Nominal assumption. 

Operating Pressure psig FV 60 14235 

Operating 'F 591F 122 W 14235 Pressure cycles to be at 122 °F. This is a uniform 

Temperature material temperature range, not between adjacent 

points. 

Contents Specific Gravity 1.00 NlA 

Contemn Level inch Empty Flooded 13 3 year maintenance period assumed 


NozAes 

Supports Within 50 'F of vessel and As above. 

... jacket temperatures.. 

Notes 

• cycle increaser The Seger most increase the numbers of operational cycles given above by 10% to account for 

commissioning duty.unless otherwise noted. 

• Fatigue enviroam natal effects assumed negligible. 

'. 

Sheet 6 of 8 DATA SHEET #: 24590-HLW-MV13-HOP-1 20012, Rev.1


PLANT ITEM 1-H 

245so•HChrv. w•OP-vsc-oosoa 

Eauiornent Cvciic Data Sheet 

Component Plant Item HOP-M-0090111,HOP-VSL-00906AM 

Number 

Component Descrip ti on I charge Vessels 

The /arorma:inn helnwr5 orbvlsrnna: ann nnvernoa_e neafaf/nrtal der y n,r ralitlna 9cAeSSmenf nie nnf fn be aeetl az oberatinnar data_ 

Materials of Construction SX575.M06022 

Design Life 40 Years 

Component Function and This component Is pad of a pumping system. It repeatedly floods and empties.. The aotion is 

Life Cycle Description caused by vacuum or airpressure being presented to the top nozzle. The surrouncri»g parent 

vessel may contain any level of the fluid between the maximum operating level and the heel 

level. The charge verse/ is subjected to buoyancy forces when immersed In the parent vessel 

contents. The vessel is in cyclic duty. 


Design Pressure psig FV 32 t0 Nominal assumption. 

Operating Pressure. - psig FV 29 2.1 x 107 

Operating 

Temperature 

°F 59 F 122 •F 14235,& Pressu re cycles to be at 122 'Fend non-eohrcldent 

with temperature cycles. The range given is uniform 

material temperature range, not between adjacent 

pohrts. Typically washdown 11year and shutdowns = 

13. 

Contents Specific Gravity 1.00 1.099 4423.5 

Contents Level inch Empty Mended 2.1 x for Coincident with pressure cycles. 


Nozzles 

Ar inlet . As above As above including pressure cycles. 

Delivery As above As above including pressure cycles. 

Supports As above . As above with contents level changing coincident with p re ssure cycle. 

Floatation on pa re nt vessel contents level frequency, 

Notes .. 

• Cycle increase: The Seller must Increase the numbers of operational cycles given above by 10% to account for 

commissioning duty unless otherwise noted - 

• CVs inside parent vessels shall have buoyancy effects considered. PJMs shall be similarly considered and also the 

riquid thrust effect. See the Speclffeation for Pressure Vessel Design and Fabrication, 24590,-W7P•3P5-MVOg-7P001. 


Sheet 7 of 8 DATA SHEET M 24590 .HLW-MVD-HOP-POO12, Rev. 1


t MECHANICAL DATA SHEET: VESSEL 24590-Hl.w-MV-RAP.vS400904 


Corttpooemt Plant Item HOP PJM-00008, HOP-PJM-000M, HO"JMA0010, HOP-PJMO-00011 

Number. - 

Component Description Pulse Jet Mixer 

Thsirernrmaann FeMw ie nrnvieMrtan an.f ammtnnae nnaeaFnrtan Nnfii Mr henna -aceacsmani_ n ie nnf fn Fn „saN ae nearaHnrtafrtafa. 

Materials of Construction SO-575 NOW22 

Design Lite 40 Years 

Component Function and This component is part of a mixing system. It repeatedly fl oods: and empties. The action Is 

Lile Cycle Description caused by vacuum or air pressure being presented to the top nozzle. The surroundmg parent 

'vessel may contain any level of the fluid between the maximum operating level and the beef 

level. The vessel is subjected to. buoyancy forces when immersed In the pa re nt vessel contents. 

The vessel is In cyclic duty. 


Design Pressure psig Fir 80. 10 Mammal assumption. 

Operating Pressure psig FV 58 4.2 x 107 

Operating 

Temperature 

•F 59T 122 È 14235 Pressure cycles to be at 122 °F and non-coincident 

with temperature cycles. The range given Is uniform 

material temperatu re range, not between adjacent 

points. Typically washdown 11year and shutdowns 

13. 

Contents Specific GraWty 1.00 1.099 14235 

Contents Level inch " Empty Flooded 4.2 x 107 Coincident with pressure cycles. 

Thrust Load A 


lb 252 4.2 x 

107& 

Note below 

Nozzles .. 

Air inlet As shove As above including pressure cycles. 

Delivery - As above" As above including pressure cycles. 

Supports As abo ve 

As above with contents level changing coincident with pressure cycle. 

Floatation on parent vessel contents level frequency. 

• Cycle increaser The Seiler must Increase the numbers of operational cycles given above by 10% to account for 


• CVs !aide parent vessels shall have buoyancy effects considered. PJMs shall be similarly considered and also the 

hquld thrust effect. See the Specification for Pressure Vessel Design anndFabrication 24590-WTP•3PS-MVOO•TP001. 


• Thrust loading should be Ignored when considering deadweight loading of PJM with empty parent vessel, and should 

an 

onlybe applied when considering buoyancy loading of PJM with full parent vessel. Assume parent vessel to be full for 

50% of stated number of PJM cycles. 

Sheet 8of8 DATA SHEET#:24590-HLW-MVD-HOP-P0012, Rev. I

R10484664 


I111111UED BY 

®? MECHANICAL DATA SHEET RpR p PDC 24590-HLW-ME•N0P-Hx-0DW2 

' PLATE HEAT EXCHANGER 

Project gpp WTp Description: I Silver MordenNe Prehearter @ 0' Etv. - Room WAl23 

Project No: 24590 SP_ #Orr WA 

Site: Hanford P&ID: 24590-NLW-M&HOP-110003 

Process floe diagram:. 2459g-RL11114MNI7TP0004 Process Data Sht peleted 

Data Sheet Number: 

24590-HLW-MED-HOP-110072 Rev.1 

Quality Level QL-2 - 


Flow Type I -lu 

Seismic Category $"ff Heat Exchanger Dub (Design %M Base surface) Blurtv •465,201 

Design Code 

Code Stamp 

Note 4 

No 

Heat Exchanger Area (with Oversurface) 

( 

0' 01920 

Desi gn) - OF 163.5 

NB Registration no Overall Heat Transfer Coeffldent (Design) Btu I hr-ft'-0F • 3.96 

Mechanical Design Data 

Hot Skis 

Design Pressure (max. / min.) psig 5 -5 - 5 

Design Temperature (max. / min.) OF 500 59 500 

Corrosion A lowance inch none 

n 

Erosion Allowance inch 

none 

cr 

HydrdPneumaacTest Pressure - psig 

insulation Type Calelmn SBlcate rigid block (note 7) 

InsulationThkkness inch Vander to spec for 140° F surface temperature and 

Thermal Cycling: 

Design min to max temp cydesfyr 1 

Design 

Proeeea Decion Data 

Hot Side Cold Side 

Flow Rate SCFM 2000 .20M 

Design Density (Avg) 

Design inlet Temperatu 

Me 0.038 0.047 

re 

Outlet Tempe 

OF 500 250 

ra ture (Base A re a) IF . 317 (Note 11) - 436 (Note 11) 

Outlet Temperature With Oversurixe area) OF ' 313.5 (Note 11) • 436 (Nab 41) 

Specific Heat (Avg) BkrUTVF 0.30 0.29 

Heat Recovery Elfidency % 70 

Fouling Resistance hr-tF-°F /Btu 0.000757 

Pressure Drop (Maximum Albwabie) Ina/fG 4 1 4 

Overall Flange InleakageSCFM

MECHANICAL DATA SHEET 

' ^ PLATE HEAT EXCHANGER 

ThermaYHydraulic Data 

Maximum Conditions 


24590-HLW-ME-HOP-HX-00002 


24590-HLW-MED-HOP-P()012 Ray.1 

Hot Side Coll Side 

Fluid Name Mahar OMgas Maker OHlas 

tN OUT IN Our 

Fluid Quanh3'es: Total (InfiW) lbmrnr 7529 7529 6392 6392 

(Note 13) Condensable Vapor (INOut) 775 775 684 684 

Llquld , (INOut) 0 0 O 0 

Noncondensable (INOut) 6754 6754 5708 5708 

Temperature (InlOut) (with Ovenafflace) •F 443 •281 (Note 11) 205 ' 399 (Note 11) 

Density tbm 0.034 0.042 0.052 0.041 

Viscosi ty CP 0.0263 0.0225 0.0208 &0247 

Molecular Weight, Vapor 18 18 18 16 

Molecu lar Weight, Noncondensable 28 28 28 28 

Specift HeatBtulllxn••F 0.311 0.291 0.281 0.301 

Thermal Conductivity BtWhr--B-°F 0.023 0.019 0.017 0.021 

Inlet pressurePSM 12.0 13.2 

Pressure Drop (with Oversur(ace) in-WG • OAS • 0.31 

Heat Recovery % •80% 

Normal Condi tions 

Hot Side Cold Side . 

Raid Name Mel1n offgas Mekar OOgas 

Fl 

uid Quantities: Total (Irvout) ItnNhr 

M 

6622 

our 

6622 

IN 

5537 

-0VT 

5537 

(Nola 13) Condensable Vapor (In/Out) 364 364 327 327 

Liquid (In/Out) 0 0 O 0. 

Noncondensable (i n/Out) 

Ternperature (IrVOu t) (with Oversurtace) •F 

6258 

434 

6258 

•254 Plate 11) 

5210 

fee 

5210, 

P 38T Nets 11) 

Density bTe 0.038 0.047 &057 0.044 

Viscosity Cp 0.0265 0.0223 0.0203 0.0248 

Molecular Weight, Vapor 

M 

18 /8 18 18 

ol ecular Weight. Noncondensable 28 28 28 28 

Spee9e Heat Btullbm-°F 0.282 0.27 0.265 0.276 

ThermalConduol(v(ty Btft-VF &O22 0.018 0.016 0.021 

Inlet pressurepsia 12.8 13.6 

Pressure Drop (wM Oversurfaoe) in-WG • 0.33 •0.22 

Heat Recovery % • II'm 

Page 2 of 3 

e



24590-HLW-ME-HOP-Hx-00002 


' PLATE HEAT EXCHANGER 24590.HLW-MED-HOP-POO12 Rev.1 

1. Hams Identified with an astedsk* are determined and or eonR►med by the Vendor. 

2. Sounding dimensions not to exceanl 150° L x 56e W x 72- H. 

3. The weight andi not "coed 10,000 Abs. 

4. The beat exchanger pressure boundary shall be designed to ASME Section V/ll, Dir 1. 

5. Vendor to design the heat exchanger to the Machankal and process Design Data, and provide pertwmance data as 

Indicated for Normal and Masrhntno Conditlons. 

6. Plates sh ll be off woldod assembly,. no gasketodJobnts allowed 

7. Vlandor to provide Insulation mounted on exterior of anit 

& Not Used. 

9. There shell be no lestr gs between hot side and cold side. 

10. The total best loss from the heat exchanger shall not exceed 1.5 kW. 

I 1.' For the Process Design Duty Vendorshafl p rovide the outlet Mmperatares tar both. the Base sufennr Apron and the 

Oversudaca Apron. For the Maximum and Normal Conditions, provide the antlot telnporatmes based. on Overeurfece 

area. 

12. The tamperatu s of the Door shag not exceed 100 'P. The temperature of the lo ca l Imbeds shag not exceed 150 F. 

13. Condensate vapor plesent Ir aAgas Is steam. There mono Dtprids prosenthr the olfgas stream. 

Notes 

14. The Cold Side Dow shall be In the straight poss (Lev I) and the Hot Side Now In Hon tipass. 

15. Contents of this document are Dange ro us Waste Perm it 

AAactlxg. 

Please note that source, special nuclear and byproduct materials, as demm" the Atomic Energy Act of 1954 (AEA), are regulated at 

the U.S. Department off Energy (DOE) facilities exchisively by DOE acting pursuant to its AEA authority. DOE asserts, that pursuant 

to the AEA, it has sole and exclusive responsibi lity and authority to regulate source, special nuclear, and byproduct materials at DOEowned 

nuclear facilities. Information contained herein on radionuc li 

des is provided for p ro cess descrip ti 

on purposes only. 

r 

o 

ONpp,E^^'Sc 

t7CPiRES' 0728fr^ 

This bawd document contains a total of 3 sheets 

Rev Descripow System Engr . E4dp Engr Checked. Reviewed Approved I Date 

1 sued for Permitting 

u94 

^ ^t 

0 Issued For Permit ting Use K. 

Krschenheiter 

NIA 

`. r 

N/A S. Shah c. Winkler M: Hoffmann 4/21/04 

Page 3 of 3

R10484663 

PLANT REM No. 

MECHANICAL DATA SHEET I'llismgy 24590-HLw-ME4HOP-Hx-00004 

( RPP4117PPOD Data Sheet Number: 

PLATE HEAT EXCHANGER 24590-HLW-MED-HOP-POO17 Rev.1 

Project RPP-WTP Description: Silver Mordenhe Prehoator a W EN. -Roam H-Al23 

Project W. .24590 Specification: WA . 

Site: Hanford P&ID: 24590-HLW-M6-HOP-P20003 

Process flow diagram: 24590-IlLW-M5-V1TT-P20004 Process Data Sht pelated 


Quality Level QL-2 _ FlowTYpe I -lu 

Seismic Category S"ff Heat Exchanger Duly (Deshgnvdth Base surface) ShAr • 465,201 

Design Code Note 4 Heat achanger Area (with Oversurface) - IF ` 1920 . 

Code Stamp No AT (LM7D) (Design) °F. 

° 63.5 

NB Registration No Overall Heat Transfer Coefficient (Design) Btu f tx-R°-°F • 3.66 

Mechanical Desirn Data 


Design. Pressure (may- I min.) psig 5 1 -5 5 5 

Design Temperature (man. f min.) °F 500 1 59 500 59 

Corrosion Nkrwancs inch none Bons 

Erosion Allowance inch Bose crone 

Hydrofteumatic Test Pressure p519 per code 

Insulation Type ftkkrmr SOfaats rfgbf block (note 7) 

Insulation Thickness 

Thermal Cyclhg: 

inch Vendor to speaW for 140° F surface tomponi tune'andnnwt Note 10 

Design min.: to max tamp cydesfyr 1 

ProcessDesimn Darts 


Design Flow Rate SCFM 2000 2000 

Design Density (Avg) Ibw 0.036 0.047 

Design inlet Temperature OF 500 250 

Outlet Temperature(Base Area) OF 317 (Note 11) 436 (Note 11) 

Outlet Temperature (With Oversurface area) OF a 315.5 (Note 11) - 436 (Note 11) 

Specific Heat (Avg) BthWxn-'F 0.30 0.29 

Heat Recovery Etfider c . % 70 

Fouling Resistance 11PR'-°FIBtu 0.000757 

Pressure Drop (Maldmtxn Albwable) lnaAlG 4 4 

Overall flange Inieakage SCFM


PLATE HEAT EXCHANGER 

ThermalOydratt)ic Data 

Maximum Conditions 

PLANT ITEM No. -H 

24590-HLw-ME-HOP-Hx-0000a 


24590-HLW-MED-HOP-P0017 Rev.1 


Fluid Name Meffer oft&* Me/t*r Of 4s 

IN OUT IN OUT 

Fluid Quantities: Total (Input) Ibnllx 7529 7529 6392 6392 

(Note 13) Condensable Vapor (WOul) 775 775 684 684 

Liquid (Input) O 0 0 0 

Noncondemable (InfOut) 6754. 6754 5708 5708 

Temperature (Input) (with Oversurface) °F 443 ' • 281 (Note 11) 205 •399 (Note 11) 

Density fair 0.034. 0.042 0.052 0.041 

Viscosity CP 0.0263 0.0225 0.0208 060247 

Mdecular Weight Vaw 18 18 18 16 

Mdeoular Weight, Noncondensabie 28 28 28 28 

.Specific Heat 8wfi "F 0.31f 0.291 0.281 0.301 

Thermal Conductivity BtuAtr:&°F 0.023 0.019 0.047 0.021 

Itiet pressurepole 12.0 13.2 

Pressure Drop (with Oversurface) In4vC, • 0.45 •0.31 

Heat Recovery% • 80% 

Norma) Conditions 


Fluid Narw Metier ONgas MetierOffgas 

w OUT im OUT 

Fluid Quantifies: Total Qn(Out) Ibmllu 6622 6622 5537. 5537 

(Note 13) Coodensable Vapor (IniOha) 364 384 327 327 

Liquid Qn/Out) 0 0 0 0 

NoncandensableUnit" 6258 6258 5210 5210 

Temperature (Input) (with Oversurface) °F 434 •2154 (Nei* 11) 188 •387(Note 11) 

Density lwr 0.038 06W Q.057 0.044 

Viscosity CP 0.0265 0.0223 0.0203 0.0248 

MdecrtarW60t, Vapor 18 18 18 18 

Molecular Weight, Noncondaroable 28 28 28 28 

SpedtcHeat BWabrn°F 0.282 0.27 0.265 0.278 

Themlal Conductivity BWlltr-tt-°F 0.022 0.018 &016 0.021 - 

Inlet pressure Pala 12.8 fZ6 

Pressure Drop (with Oversurface) in-WG • 0.33 •0.22 

Heat Recovery% • 82% 

Page 2 of 3 

y

..a, 


PLATE HEAT EXCHANGER 

Notes 


24590-HLW-ME-HOP 41X-00004 

Data Sheet Number. 

24540-HLWMED•HOP-P0017 Rev. 7 

1. Items kkmtg/ed with an asterlsO are determined and or confirmed by the Vendor. 

2 Bounding dimensions not to exceed: 150v t x 560 Wx 720 N. 

3. The welaht shag a" exceed 10,0001" 

4. The beat exchanger pressure boundary shag be designed to ASh/E Sectkm Vill, ON 1. 

5. Vendor to design the beat exchanger to the Mechanied ead Process Design Data, and provide performance data as 

Indicated for Norma/ and Maximum Conditions. 

6. plates shag be aff welded assembly, no gasketed)obrts allowed. 

7. Vendor to provide Insulation mounted on exterior of unit. 

8. Not Used. 

More shall be no leakage between hot side and cold s id e. 

10. The total beat loss from the beat exchanger shalt not exceed 1.5 kW. 

11. For the Process Design Data, Vendor shapprovide the outlat temperatures for both the Base surface area and the 

Oversurfaee area. For the Maximum and Normal Conditions, provide the outlet temperatures based an Orersmfaae 

area 

f2. Tho temperatura of the Boor shag not exceed 100 T. The temperature of the loc al Imbeds shelf not exceed 150 T. 

13. Condensate vapar presets-In oflgas Is steam 7here.am no liquids present In the aftas stream. 

14 The Cold Silo Flow, shag be in the straight pass f6e, f) and the Not Side Now in the Uposs, 

Please note that source, special nuclear and byproduct materials, as defined in the Atomic Energy Act of 1954 (AEA are regulated at 

the U.S. Department of Energy (DOE) facili ties exclusively by DOE acting pursuant to its AEA authori ty. DOE asserts, that pursuant 

to the AEA, it has sole and exclusive responsibility and authority to regulate source, special nuclear, and byproduct materials at DOEowned 

nuclear facilities. Information contained herein on radionuclides is provided for p rocess description purposes only. 

This bound doenmon contains atotal of 3 sheets 

Rev Description System Ergr Equip Engr Checked Reviewed Approved Date 

I uR94ssued for Permitting :/ems_ _ _ ,Q 

0 issued For Perm itti 

ng Use K. 

Kirschenheiter 

^1 a I DLL 

N/A S. Shah C. Whaler Hoffmann 4124/04 

Page 3 of 3

NmNo. 

PW 

RIY'TV^^w 

CENTRIFUGAL BLOWER 

Data Sheet: 

245 1.-mmA-MACS-00002 

Plmtltem No. (See Note 11) Rev No. 

245WHLW-MAD-HOP-P0018 24590-HLW-H0P-FAN-00001AB/C 2 

245 HLW HOP-FAN 00009AW 

{ proiect HPP-WTP Bldg/RoomD HEW/H-B001C Mmufectrun:. The Spinster Turbine Co. 

2 PmleaNw.. _ 2459D Supporting DELETED 

. 3 Site, DOEHanford Calculation Mmufmmrer 

4 SafacyChms SDS Suppofing. 24590-111,W-M6-HOP-POW3 Model No 

5 Seismic Category .SC-111 Dmwmgs 24590-HLW.M6.HOP.P20M QuentityRequi¢d 6 

6 System No. HOP System Dese 2459D-HLW3YD-H0P4W"1 Qwity Lev elQL2 

7 Pmcns Dorn Sheets DektW 

8 

Dnviptim Booster Extraction Fan 

9 DESIGN TEIIIfPERAITM9 

10 7mar DesignTempemme Issuances °F 1 95 

11 IndomDesip Tanpoamm inimum °F 59 Maximum °F 45 Relative Humidity 10'A (ounJ 

12 

13 Cmwmmatim Ch3d5cRtimAte DELETED Elevation- 661 abwM MSL 

14 DESIGN COMMONS 

15 IDesign Fan 16M ACFM Inlet AirTempemmre dmax tloW (Desrgn) 162 V 

16 jDad lin Eximal Sta ti . 

c Pon. QUe 12) 84 inches WC Suction AirDensitystmu flow(Dedga) 0.046 Ibs/ft 

17 

Noticed 

FmCspaaty . 847 ACFM fuletA6Tempandumatnmmd Raw 143, °F. 

18 ExtwdStatic Pre stuomsel Bow 62 inches WC Sudan AnDeosi ty Mumma] this, 0.054 Hollis 

_ 

19 Mmimm OpendingFem Capacity 

627 ACFM hiletAwTemperanue mmmimma ope rating flow, 

mc110 WC Suction Air Density atmmimum ope rati 127' vF 

20 Extemd StanePresuueetmto OP flow, 37 

ng flow 

0.058 

lb/ft 

Fan 

21 Tad StaticRomeme (Max). inches WC 

prenmerango 11.6 to 12.7 psm 

22 Mon sa to Fan 

n • ' . FanDimhsage Pnanrtetmge .13.9 to 14.D psta 

23 Fm Opening Sp ee d RPM FmMomropemtmg Wnght pomds 

24 owaat0paws"Cmdiaaon 111HP ower st Inlet Temperature, BHP 

25 Asa + Fm+Bore • Max. Temp. At Pace, his Mcch. Design 350 /30 

26 CONSTRUCTION 

27 Design FmMa^m ... - DcdgnF an Model Number 

28 AMCA Drive Aeaegrmmt . It JAMCAlmletButPosificasn 

29 AMCA MesesPadtim Direct Drive AMCADiseharpClpbWt. 

30 R esidue CW(Sm No te 9) .Fan Scroll Type 

31 FAN WHEEL 

. 

32 

Fan 

Type Note 4) Fm ShaflDiame[a + 

33 ip Whad Diameter • Aced Wheat Dramas 

34 Wheel Width • Acted Wheel Width + 

35 Design Fan RPM AzbWFm RPM design 

36 

37 

DempBrde Horsepower 

Fan 

BeuiogType 

• 

+ 

BmkeHOCSCpowa 

FWBearng Destgoator + 

38 First Crmcal tPm Sand CriticalS • .rpm 

39 FAN MATERIALS 

40 316L SS mWheel 316L SS'. 

41 

42 

43 

va9e 

Shaft: 

Vme 

NIA 

316L SS 

NIA 

Wounting Frame 

Hoz/Trmsftion Piece 

immharBa Daopc 

316L SS', 

316L SS / 316L SS 

NIA 

44 

45 

hldSnan 

Moderated 

NIA 

Falk Flea-Type (oregaa4 

6Slnxml Featan 

Sa fiGuards. 

NIA -' 

OSHA Comptti6k 

46 FAN ACCESSORIES 

47 

49 

Flanged hies 

Flanged Dischmge 

Ye 

Ya 

Flmgedhd at Dimeosian,in. 

FIeangod Dischage Dfmmsions , in. '(See No te 6) 

49 FfangodDiadwpEvm 

No Flanged Discharge Evass Dimen nions, 

SphtHuudng Ye 

in 

NIA 

5D 

SplitHuu>mgTyp t, 

51 IctBox Yn Inical ieType- 

52 hdctDamper No hm DanwType NIA 

53 InIa tmsitimPiea Ya Wd TnuifionPim hdaFlaoge Diane, m. •(SmNote6). 

54 InW=tkmDm Yea hrspeetiw Door Size, in: •t in. dis., half-coupling w/plug(See Note 10) 

55 Drain 

Commetim 

Yn Dmn Cone Connection Size, is 'Sea Spa: 

56 ShaD 

Seals 

to Sid Type GuTiEau 

I of 3 

I 

iA 

m 

IA 

'A 

'A 

10 

'A 

IA 

IA 

IA 

IA


Data Sheet; 

24590-HLW MAD-HOP-P0018 

No. 

245 L-MRA-MACS-00002 . 

Plaalltmallo. (Sce Note 11) 

24590-HLW-H0P-FAN-00001A/BIC, 

24590 HLW-HOP-FAN-00099AMIC', . 

1 

2 

Projec t 

Projeallo 

RPP-W?P 

245% 

Bldg.QBaam # 

Supporting 

HLW /H-BOOK 

DELETED 

Monaco= 

The Spencer Turbine Co. 

3 Site DOEHuford. cdculation 

Manofne4va 

4 Sefdy Class SW Sun-Inns 24590.11LW-M6-HOP-P0003 Model Na 

5 Seismic Caugmy SC411 Drawings 24590-HLW-M6-HOP-P20003 QuanWRequued 6 

6 System No. HOP Sptem.Dese 24590-HLW4YD-H0P- WOI QiWity Level QL2 

7 Proeess lane Sheds IDeleted 

8 

Desmipnoa Booster ExtracHmn Fan 

. 

9 FAN ACCESSORIEScoHtiIIned - 

70 Manuel No lsoletionBase Type NIA 

II IsoutimBeseMaeufidum NIA 

12 Isolation Springs Yes Isolation Springs M* and Model No 

13 Isolation Springs Minimum Dreamer ... • . 

14 Is olation Springs Deflection 

15 

16 Flodble Lila Connection T Ym 

Springs ResnsmtRidures 

Flexible Inlet Connection Dimensions "(Smxote6) 

17 Flexible Inlet Type 

18 Meadbk Wet Cnnnxdon Material •316LSS 

19 Flexible Inlet Connection Manufacturer and Model No • - 

2D Flexible Oude:.Conoecdoa I. Yes FI=V4 Cmdet CmmectionDwensions •(Sw Nme6). 

21 FlarobleOudetConnection Type. 

22 Flexible (hide CmnettioaMmerw - "316L.SS 

23 Flexible OudetCeonec4rn Manufegmerend ModdNo. 

24 inlet Smem No 

25 Inlet goose Farmers, NIA 

26 Fan Pedestal Yn 

27 Fm PeduWDcscriptwn, Common as tiag 6aaefoe fan, motor, sad betimes 

26. Iwletiai Studs No Lsuutim rhiclvas - NIA 

29 Silexm No 

3o MOTOR AND , DRIVE RE UMEMENTS 

31. Deleted 

32 AS able Drive Yca 

33 S 'd DdwFgmca PravideASD ream" for moterRPM to wass throw ],tint critical eased dead band to avoid erewivevibraOoa. 

34 NOTES 

35 

36 

37 

36 

39 

40 

41 

42 

43 

44 

45 

46 

47 

48 

49 

50 

51 

52 

53 

54 

1) •Dcvoes&mtob.WoidWrverifiedby Vendor 

2) N/AdemMd"NotApplicame. 

3). TBI)deooles-To Bel)e4rminormalsmrdde. 

4) Mmimpdhsa],dlbennti- wdmipdevct*ugmnbmwsiymmgSPfromfreedeli ytlmshmoff 

5) Bounfti limemionsnotto e'45"wx6Vbx105"I(Blowm,Motm BaseplmeandlmetBox) 

6) Connections, shall maaA Buyers supply PiPe: 10 inch diameter, 316L SS, Schad 40S, w/ 150 kRF Flange 

7) SanSpeeiEeNau 24590-WfP-3PS-MACS-TP004 feraddiessed reclummeos. 

8) Momrhmsepowermlxpmvidedby Vendor.Assume-cold Wcondaions(59- r ) msmunp. 

9) Rou4onis isadaviepdfmmdriveside. - 

10) Provide apfugged mapegim part for each stage ofshemulti-sUgeblmmr. 

11) DrivmEqulpmmtlMma/Adjmtable SpeedDmrc(ASD)egmpmmrtagreutiomWpanfou : 

Fee Tar Number MmorTar Nam],er ASDTar Number 

HOP-FAN-MIA / HOP-MTR-OWOSA / H0PASD4OW01A 

HOPFAN-MIS I HOP-MTR-0W05B I HOP-ASD-MIB - 

HOPFANMWIC 1 HOP-MTIt4 WMC I HOP-ASD.Q=IC 

HOP-FAN-OOW9A I AONWR-00006A / H0P-ASD4W03A 

HOP-FAN-OMM I HOBM7R-00006B ! HOP-ASD41W0313 

HOP-FAN-WW9C / HOP-MTR-00006C ! HOPASD-OM3C 

12) TheEsurnd StaticPreasme at design, owmal,andmioimam operating flows includes 2 mches WC maximum drop shrmgh the Wet box 

13) Cmtmniofthbdoeumm=Dmgeaus WeltePamita8scfin& 

Rev No 

2 

2of3 

IA 

iA 

i° 

D 

'A 

IA 

IA 

I°


Data Sheets 

24590-HLW-MAD-HOP-P0018 

t.MNo. 

24990-01A—M-MACS-MO2 

Plat Lem No (Ste Note 11) 

24590-HLW-H0P-FAiv4o0001A /R c 

i 

24590-IRLW-HOP-FAN-00009A/M 

I 

2 

PMM 

PM=No 

RPP-WTP 

24590. 

R1dg./Rnm 0 

Sdpportmg 

RLW /H-a001C 

DELETED 

Mnufamma: 

5pencerTm 6ine Co. 

3 Um DOE Haatord (WCw1 ion 

Mnuratmtr. 

4 

5 

6. 

Way CUss 

Seismic Category 

System NO. 

SDS 

SC-HI 

HOP 

Supportmg 

Dnwinp 

Syst=D= 

24590•HLW-M6HOP-P0003 Modci No- 

24590-HLW-M6-HOP-P20W7 Q="Rcq itad 

24590-HLW-3YD-HOPdO001 Qw6ty Level 

6 

QL2 

7 Prc=Dm Shots IDek4w 

S Dacnpbw Booster Extraction Fan 

9 

10 

11 

12 

12 

14 

15 

16 

17 

la 

19 

20 - 

zz 

23 

24 

s 

26 

n 

29 

29 

30 

3I 

32 

33 

34 

M 35 

Please note that source, special pe nuclear and byproduct mate materials, as ddefined in the Atomic Energy 

Act of 1954 (AEA), are regulated at the U.S. Department of Energy (DOE) facilities exclusively by DOE 

acting pursuant to its AEA authority. DOE asse rts, that pursuant to the AEA, it has sole and 

exclusive responstbiitty and authority to regulate source, special nuclear, and byproduct materials at 

DOE-owned nu clear facifdies. informa tion contained herein on radionucrides is provided for process 

description purposes only. 

`s Ba 

^^^VVV V^ 

s x 

,Ar 3 3 `► 9 ô 44 

e_ 

SÔNALE^C9'- 

EXPIRES: D7M 

7'h,shounddwa tcaxW=a1oWof3 3heeM 

2 Re Lsoedf.P=oW gUse ^^- 

I 9/151004 

Upda ddemg0000dieoaxmdissuedforPeoamft 

Um SOpaseded24590-HLW-MADHOP-PW19. P0020. 

P0035,P0036.£ P0O37. 

0 3/19104 ksadfocPermh6ngUse DdaE Green 

Rev No 

r- YiMdMnhe' Jawo Med'ma/ NIA Eic b= 

MOOrddml 

acv Data one,ipdoo I Ori&Mr Checker I Reviewer Approver 

NIA 

2 

3013 

1A 

1A 

]A 

'A

PLANT REM No. 

, MECHANICAL DATA SHEET: VESSEL 24590•lAR4MV-RLayst.-oot6a 

project RPP• 111171' PWD 24590-LA8-M6-RL&1`W02 

Project No. 24590 Process Data Sheet NIA - 

ProiectSite: Hanford Vessel Drawing 24590-LAS-WWRL&P0001 

Desc ri ption. Lab Area Sink Drain collection Vessel 

Charge Vessels (Tag Numbers) None 

PUlsejet Miters/Agiato rs (Tag Numbe rs) None 

PWU=rnps (fag Number) None 

Reference Data „fAf3Y^CBy 

Pepe! 

Design Data 

Oval ity Lem commercial Grade Fabr ication Specs 245904VTP-3 13SWI100-7110001 

Seismic Category y C61 11 Design Code ASME Sec Vill Div 1 

Senhoefccntents Radioactive Liquid Drain Code Stamp Yes 

Design specific Grzvity 

Maximum Opera 

1.02 NB Registration Yes 

ti 

ng Vohmie gal 2740 (Note 5) Weights pbs) Empty OOpera ' in l 

Test 

Total Vdmne gal 3180 (AWe 5 Estimated 7200 28110 33910 

Inside.Diamarer 

LengtiVFbight (TL-TL) 

mob 

mch 

2O2 

69. 

Wind! Design 

Snow Design 

Not Required 

Not !agelmd 

Vessel 

dr 

Vessel 

i n 

I CoiWadcet 

Design 

Seismic Design .24590-W7P-3PS-F801-700018 

24590-N?P-3PS4WV00-7P002 

Inte rn al Pressure Pais O 15 - NIA SeismiceasaMoment "" F 

Exte rn al Pressure Psig 0.15 7 NIA Posthreld He at Treatrnent Not Required 

Temperature 'F 78 .240. N/A Corrosion PJWwance Intl, 0.04 

Min. Design Mehal Temp. T -20 Hydrostatic Test P ressure"' fs9 


materials, as defined In the Atomic Energy Act of 1954 (AEA), 

are regulated at the U.S. Department of Energy (DOE) fac il 

ities 

exclusively by DOE acting pursuantto its AEA authority. DOE 

asserts, that pursuant to the AEA, it has sole and e xclusive 

responsibility and authori ty to regulate source, special nuclear, 

and byproduct materials at DOE-owned nuclear faci lities. 

Information contained herein on radionuc li des is provided for 


1 25 05 Issued for Permitting Use 

ACWaI 

EXPIRES 1Sa 1 0/Ofe. 7 

JS 

This Bound Document Contains a total of 2 sheets- 

0 315/04 Issued for Permitting Use . Bri htman M, Arulam alam C. Slater M. ffmann 

REV DATE REASON FOR REVISION, PREPARER CHECKER REVIEWER APPROVER 

QMWWW 

R10523241 

Sheet 1 of 2 DATA SHEET M 24590-LAB-MVD-RLD-P0164, Rev 1

'COO) 



Cmvartwt Mate rial minimum 


Thickness / Size 

Top Head UNS N0836F See Drawing Auxiliary 

Shell UNSH00367 See Drawing Primary 

Bottom Head - UNS M00367 See Drawing Primary 

Support (Skid) SA 243,304 (Carbon Content Max 0.030•-) •• NIA 

JW*aVCOaslHalFFipe Jacket NIA NIA N/A 

lote°ea UNS N08367 See Drawing Secondary 

pipe - 

FoMi gs/8ar stock 

Boltirgfueskets 

UNS N08367, S862241102761N06022, No 4 1 

UNS N0U67 

None 


24590-LA V-RLD-VS"0164 

Containment 

See Drawing Sea Note,t 

See Drawing As Note-t for Nozzle Necks 

NIA NIA 

Orientation Vertical Support Type Skirt 

Insulation Function Not Applicable Insulation Material Not Applicable 

Insulation Thk&ness (inch) Not APPlicabte Weld Sainte Parish De-sealed as laid. 

Remarks 

Note t: Hanle necks below maximum operating level are primary, others amrillary. 

Note 2. Design file la 40 years 

Note 3. Deleted 

/q^ 

Note * Materfal of construction for nozzle NO 7 and NO 6 shall be tfastelloy C22 or Nasteiloy C-27S ° ^ 

Note St Vessel volumes are approximates and do not account for manufaeturing tolerances, males, and displacement of 

Internals. 

Mote 6: Revised design dataQ 

Note 7. Contents of this decumaetare Derigamus waste Permit Affecting. tQ 

Sheet 2 of 2 DATA SHEET #. 24590-LA"VD-RLD-P0164, Rev 1


Project RPP-W77 P&ID 24590-LAB-M6-BLD420001 

Project No' 24590 Process Dafa Sheet NiA. 

Project Hanford vessNDrevnng 24590-LAB-MV-RLD-P0003 

Description Hot CoH Drain Collection Vessel 

Charge Vessels (Tag Numbers) . None 

Pulsejet Krx IAgitators (Tag Numbers) Nerve 

RFDstPumps (Tag Numbe rs) None 


24690"B4W4ff.&VSL401s5 

Reference Data BPPiMfPPDC 

Design Data 

Duality Level OL-2 Fabrication Specs 2459o.Wyp.3PS.MVO4TP0o+ 

seismic Category SC411 Design Code ASME Sec Vlll Div 1 

ServicetContents Radioactive Liquid Drain Code Stamp yes 

Design specific Gravity 1.02 NB Regis tration yes 

INe>amum operd" V olume gat 6615.(Note 5) Weights (Ibs) EMDtV Qoeretirro ,Tgt1 

Total volume ga l 9100 (Note M t Estimated 21185 75014 97966 

Actual' 

InsideDiameter inUr 192 Wind Design Not Requbed 

Lev Haight (TL-T r inch 27 srNw Design Not. Required 

V es sel 

oueragm 

Vessel 

0 

Coi l/Jac luet 

Desi°n 

:Seismic Design 2459owip-3PSFBo1-Tow! 8 

24590• 14FlP-300S WV00-7P002 

Inte rn al Pressure peg 0 15 MM Seismk ease Moment" Mb 

E#emal Pressure Psig CM15 7 .NIA Poshveld Heat Treatment Not Regnlred 

Temperature 'P 78 240 NIA Cenosion Allowance .. .Inch 

Min. Design Metal Temp °F -20 1 Homsta ticTest Pressure" peg 



are regulated at the U.S. Depa rtment of Energy (DOE) facilities 

exclusively by DOE acting pursuant to Its AEA authority. DOE 

asserts, that pursuant to the AEA, it has sole and exclusive VAS 

responsibi li 

ty. and authority to regulate source, special nuclear, eô4 _ , $4y0T 

and byproduct materials at DOE-owned nuclearfacili ties. 


process desc ri ption purposes only. 

1 3 2$ 05 Issued for Permitting Use 

''f) ,p 0030952^K 

GA AD+ISTB4Q"^ 

CS`rIONAL SO'l 

EXPIRES 427701x6 

This Bound Document Cnntains a total of 9 shppte 

0 3/1!04 Issued for Permitting Use Brightman M, Arnlam alam C. Slater M.Wftann 

REV DATE REASON. FOR REVISION PREPARER CHECKER .REVIEWER APPROVER 

.AI IdlNlllll 11' 

R1o523240 - 

Sheet 1 of 2 DATA SHEET M 245904LAB-MVD-RLD-P0165, Rev. 1



PLANT REM No. 

Comment 

mate" Minimum 

- 

Thickness I Sim- 

Top Head UNS X06367 See Drawing Auxlgery 

Strait UNS N08367 - Sae Drawing Prbnwy 

2°ggaaasawvacn vsc 00165 

Containment 

Bottom Head UNS X08367 See Drawing ! rM - 

Support (Skid) SA-240304 (0.030% cerium Max) '• NiAl 

JackeUCoilxriaY,-Pipe Jacket N/q MIA NIA 

Internals UNS N08367 - See Drawing Secondary 

Pipe UNS X083671 N06022IN10276, Note 4 1 Sea Drawing Note-f 

Forjngs• Bar stock UNS X06367 See Orewin Note-f for Nozzle Necks 

Bothrorsraskets None I NA I NIA 


Orientation Vertical Support Type Skirt 

Insulation FUncgon Not AppReaWe InsulelionMateial Not App77cabM. 

Insulation Thickness (ink) Not Applicable Well Solace Finish De-wailed as !dd 

Remarks 

Note 1: Nozzle necks below mexhmmn operading level are primary, others auxlitery. 

Nets a Design Rte Is 40 years 

Note 3: Radiography 100% required on the primary confinement WINS 1A 

Note* Matertd ofconstroa oar for nozzle At& 3 and the dip P476 shag be alloy UNS X060221 

Note 5r Vessel volumes are approximates end do not account for manufacturing tolerances, nozales, and displacement of 

intemals. 

Note 6. Quality level and seismic category designations on ids datasheet reflect requirements beyond ibex* stipulated by 

the vessel sahry hmctlon - 

Mote 7• Contents of this document are :Dangerous Waste Permit Afiectirag. 

Sheet 2 of 2 DATA SHEET#: 24590-LAB-MVD-RLD-P0165, Rev. 1.

Attachment 2 

05-ED-034 

Bechtel National, Inc. Certification Statement

Bechtel National, Inc. Certification 

The following certification statement is provided consistent with Contract No. DE-AC27- 

OIRV 14136, Section H.26, Environmental Permits, paragraph (g) for the submittal of Hanford 

Facility Resource Conservation and Recovery Act Permit Modification Notification Form 

(24590-WTP-PCN-ENV-04-0014) to update select mechanical data sheets in Appendices 8.6, 

9.6, 10.6, and 11.6 for the Pretreatment Facility; Low-Activity Waste Facility, High-Level Waste 

Facility, and the Laboratory, respectively, in the Dangerous Waste Permit. 

I certify under penalty of law that this document and all attachments were prepared under my 

direction or supervision in accordance with a system designed to assure that qualified personnel 

properly gather and evaluate the information submitted. Based on my inquiry of the person or 

persons who manage the system, or those persons directly responsible for gathering the 

information, the information submitted is, to the best of my knowledge and belief, true, accurate, 

and complete. I am aware that there are significant penalties for submitting false information, 

including the possibility of fine and imprisonment for knowing violations. 

J. P nschel Date 

Project Director

View Document Here - Hanford Site

Create successful ePaper yourself

Delete template?

Save as template?