Report - DCE - Nationalt Center for Miljø og Energi

Ã
Ã
ÃÃ
Ã
Ã
ÃÃ
Ã
Ã
ÃÃ
à à ÃÃÃÃÃ
ÃÃÃÃ
à à ÃÃÃÃÃÃ
ÃÃÃ
à à ÃÃÃÃÃÃ
Ã
Where appropriate, this is included in the present report with annexes.
Ã
Ã
ÃÃ
à à ÃÃÃÃÃÃÃ
ÃÃ
There is a clear line between the external data and the data processing.
Ã
Ã
ÃÃ
à à ÃÃÃÃÃÃÃ
Ã
At present, a manual log table is not in place at this level. However, this feature
will be implemented in the future. A manual log table is incorporated in
the national emission database, Data Storage level 2.
%BUB TUPSBHF MFWFM
ÃÃ Ã Ã ÃÃÃÃÃ
ÃÃ
ÃÃÃÃÃÃÃÃÃÃ
ÃÃ
To ensure a correct connection between data on level 2 and data on level 1,
different controls are in place, e.g. control of sums and random tests.
ÃÃ Ã Ã ÃÃÃÃÃÃÃÃÃÃ
ÃÃ
ÃÃ
Data import is checked by use of sum control and random testing. The same
procedure is applied every year in order to minimise the risk of data import
errors.
0UIFS 2$ QSPDFEVSFT
The emission from each large point source is compared with the emission
reported the previous year.
Some automated checks have been prepared for the emission databases:
• Check of units for fuel rate, emission factors and plant-specific emissions.
• Check of emission factors for large point sources. Emission factors for
pollutants that are not plant-specific should be the same as those defined
for area sources.
• Additional checks on database consistency.