Report - DCE - Nationalt Center for Miljø og Energi

Ã
explained in the following are based on these latter results, in order to be
consistent with the Danish NIR report.
The working machinery and equipment in industry (SNAP code 0808) is
grouped in Industry-Other (1A2f), while agricultural and forestry non-road
machinery (SNAP codes 0806 and 0807) is accounted for in the Agriculture/forestry/fisheries
(1A4c) sector together with fishing activities.
For mobile sources, internal database models for road transport, air traffic,
sea transport and non road machinery have been set up at DCE, Aarhus
University, in order to produce the emission inventories. The output results
from the DCE models are calculated in a SNAP format, as activity rates (fuel
consumption) and emission factors, which are then exported directly to the
central Danish CollectER database.
Apart from national inventories, the DCE models are used also as a calculation
tool in research projects, environmental impact assessment studies, and
to produce basic emission information which requires various aggregation
levels.
4PVSDF DBUFHPSZ EFTDSJQUJPO
The following description of source categories explains the development in
fuel consumption and emissions for road transport and other mobile
sources.
'VFM DPOTVNQUJPO
ÃÃÃÃÃÃÉÃÃÃÃÃÃÃÃÃ
ÃÃ ÃÃÉÃ
ÃÉÃ Ã
ÃÃÉÃ Ã
ÃÉÃ Ã
ÃÉÃ Ã
ÃÉÃ Ã
ÃÉÃ Ã
ÃÉÃ Ã
ÃÉÃ Ã
ÃÉÃ Ã
à Ã
Table 3.21 shows the fuel consumption for domestic transport based on DEA
statistics for 2010 in NFR sectors. The fuel consumption figures in time series
1985-2010 are given in Annex 2.B.16 (NFR format) and are shown for 2010 in
Annex 2.B.15 (CollectER format). Road transport has a major share of the
fuel consumption for domestic transport. In 2010 this sector’s fuel consumption
share is 74 %, while the fuel consumption shares for Agriculture/forestry/fisheries
and Industry-Other are 11 and 6 %, respectively. For
the remaining sectors the total fuel consumption share is 9 %.