Residual Strength and Fatigue Lifetime of ... - Solid Mechanics
Residual Strength and Fatigue Lifetime of ... - Solid Mechanics Residual Strength and Fatigue Lifetime of ... - Solid Mechanics
A Figure 1.10: CSB, DCB, TSD, DCB-UBM, SCB and MMB test specimens. 14
This page is intentionally left blank. 15
- Page 1: Residual Strength and Fatigue Lifet
- Page 4 and 5: Published in Denmark by Technical U
- Page 6 and 7: This page is intentionally left bla
- Page 8 and 9: method to accelerate the simulation
- Page 10 and 11: Synopsis Sandwich kompositter er i
- Page 12 and 13: This page is intentionally left bla
- Page 14 and 15: Contents Preface Executive Summary
- Page 16 and 17: 5 Face/core Interface Fatigue Crack
- Page 18 and 19: This page is intentionally left bla
- Page 20 and 21: H11 bimaterial constant H22 bimater
- Page 22 and 23: This page is intentionally left bla
- Page 24 and 25: These peculiar damage modes often r
- Page 26 and 27: 1.2 Overview of the Thesis In this
- Page 28 and 29: Figure 1.3: Fracture modes, from Be
- Page 30 and 31: In Equations (1.5) and (1.6) H11, H
- Page 32 and 33: Figure 1.6: Schematic illustration
- Page 34 and 35: The compact tension specimen (CT) i
- Page 38 and 39: Chapter 2 Buckling Driven Face/Core
- Page 40 and 41: (DIC) measurement system (ARAMIS 2M
- Page 42 and 43: corresponds to the onset of debond
- Page 44 and 45: Figure 2.7: Crack kinking into the
- Page 46 and 47: (2.2) where and for plane str
- Page 48 and 49: A modified version of the tilted sa
- Page 50 and 51: previous observations of crack path
- Page 52 and 53: of contact elements (CONTACT173 and
- Page 54 and 55: the debond opening initially increa
- Page 56 and 57: Table 2.4: Instability loads determ
- Page 58 and 59: G (J/m2) 600 400 200 0 H100 IMP=0.1
- Page 60 and 61: This page is intentionally left bla
- Page 62 and 63: Hayman (2007) has described a damag
- Page 64 and 65: Table 3.1: Panel test specimens. La
- Page 66 and 67: sheet and the core thickness, respe
- Page 68 and 69: Load (N) 250 200 150 100 50 0 H130
- Page 70 and 71: Table 3.4: Parameters in the face/c
- Page 72 and 73: was used to monitor 3D surface disp
- Page 74 and 75: arising due to the junction between
- Page 76 and 77: (a) Debonded face sheet Figure 3.16
- Page 78 and 79: Figure 3.19 shows the determined en
- Page 80 and 81: H130 MMB H130 Panel H250 MMB Interf
- Page 82 and 83: 3.6 Conclusion In this chapter the
- Page 84 and 85: This page is intentionally left bla
This page is intentionally left blank.<br />
15