Residual Strength and Fatigue Lifetime of ... - Solid Mechanics
Residual Strength and Fatigue Lifetime of ... - Solid Mechanics Residual Strength and Fatigue Lifetime of ... - Solid Mechanics
Bezazi A., Mahi A. E., Berthelot J. M. and Bezzazi B. (2009), Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending Part 2: Fatigue Test Results and Damage Mechanisms, Strength of Materials, 41(3): 257-267. Billardon R. (1989), Etude de la rupture par la mecanique de I’endommagement, These de Doctorat es Sciences, Universite Paris 6. Blasques, J. P., Stolpe, M. (2011), Multi-Material Topology Optimization of Laminated Composite Beam Cross Sections, International Journal for Numerical Methods in Engineering, (submitted). Boisse P., Bussy P. and Ladeveze P. (1990), A New Approach in Nonlinear Mechanics – the Large Time Increment Method, International Journal of Numerical Methods in Engineering, 29: 647–663. Bozhevolnaya E., Jakobsen J. and Thomsen O. T. (2009), Fatigue Performance of Sandwich Beams With Peel Stoppers, Strain, 45: 349–357. Burman M. and Zenkert D. (1997), Fatigue of Foam Core Sandwich Beams, Part I: Undamaged Specimens, International Journal of Fatigue, 19: 551–561. Burman M. and Zenkert D. (1997), Fatigue of Foam Core Sandwich Beams, Part II: Effect of Initial Damages, International Journal of Fatigue, 19: 563–578. Burman M. and Zenkert D. (2000), Fatigue of Undamaged and Damaged Honeycomb Sandwich Beams, Journal of Sandwich Structures and Materials, 2: 50-74. Burman, M. (1998), Fatigue Crack Initiation and Propagation in Sandwich Structures, Doctoral Thesis, Department of Aeronautics, Royal Institute of Technology. Cantwell W. J. and Davies P. (1994), A Test Technique for Assessing Core-Skin Adhesion in Composite Sandwich Structures, Journal of Material Science Letters, 13: 203–205. Cantwell W. J. and Davies P. (1996), A Study of Skin-Core Adhesion in Composite Sandwich Materials, Advanced Composite Materials, 3: 407-420. Cantwell W. J., Scudamore R., Ratcliffe J. and Davies P. (1999), Interfacial Fracture in Sandwich Laminates, Composites Science and Technology, 59: 2079–2085. Carlsson L. A, Sendlein L. S, and Merry S. L. (1991), Characterization of Face/Core Shear Fracture of Composite Sandwich Beams, Journal of Composite Materials, 25(1):101–16. Chen H. and Bai, R. (2002), Postbuckling Behavior of Face/Core Debonded Composite Sandwich Plate Considering Matrix Crack and Contact Effect, Composite structures, 57: 305- 313. 138
Cognard J. Y., Ladeveze P. and Talbot P. (1999), A Large Time Increment Approach for Thermo-Mechanical Problems, Advances in Engineering Software, 30: 583–93. Cojocaru D. and Karlsson A. M. (2006), A Simple Numerical Method of Cycle Jumps for Cyclically Loaded Structures, International Journal of Fatigue, 28: 1677–1689. DIAB, Divinycell H Technical Data, Laholm. From: http://www.diabgroup.com. England A. H. (1965), A Crack Between Dissimilar Media, Journal of Applied Mechanics, (32) 400-402. Erdogan F. (1963), Stress Distribution in a Nonhomogeneous Elastic Plane with Cracks, Journal of Applied Mechanics, 30: 232-237. Fish J. and Yu Q. (2002), Computational Mechanics of Fatigue and Life Predictions for Composite Materials and Structures, Computational Methods in Applied Mechanical Engineering, 191: 4827–4849. Gaudenzi P., Perugini P. and Riccio A. (2001), Post-buckling Behavior of Composite Panels in the Presence of Unstable Delaminations, Composite Structures, 51(3): 301-309. Hayman B., Berggreen C., Lundsgaard-Larsen C., Karlsen K. and Jenstrup C. (2007), Design of X-joints in Sandwich Structures for Naval Vessels, 10th International Symposium on Practical Design of Ships and Other Floating Structures, Houston, USA. Hayman B. (2007), Approaches to Damage Assessment and Damage Tolerance for FRP Sandwich Structures, Journal of Sandwich Structures & Materials, 9(6): 571-596. Hayman B., Berggreen C. and Petterson R. (2007), Tests and Analyses of FRP Sandwich Structures with Face Sheet Wrinkles, Journal of Sandwich Structures and Materials, 9(4): 377- 404. He M. And Hutchinson, J. W. (1989), Kinking of a Crack out of an Interface, Transactions of the ASME, 54:270-278. Hellen T.K. (1975), On the Method of Virtual Crack Extensions, International Journal of Numerical Methods in Engineering, 9: 187-207. Hoff N. J. and Mautner S. E. (1945), The Buckling of Sandwich-type Panels, Journal of the Aeronautical Sciences, 12: 285–297. Hohe J. and Becker W. (2001), Assessment of The Delamination Hazard of the Core Face Sheet Bond in Structural Sandwich Panels, International Journal of Fracture, 109: 413-432. Hutchinson J. W. and Suo Z. (1992), Mixed Mode Cracking in Layered Materials, Advances in Applied Mechanics, 29: 63-191. Jolma P., Segercrantz S. and Berggreen C. (2007), Ultimate Failure of Debond Damaged Sandwich Panels Loaded with Lateral Pressure - An Experimental and Fracture Mechanics Study, Journal of Sandwich Structures and Materials, 9 (2): 167-196. 139
- Page 110 and 111: Chapter 5 Face/Core Interface Fatig
- Page 112 and 113: of this chapter, sandwich panels wi
- Page 114 and 115: H250 Specimen H100 Specimen H45 Spe
- Page 116 and 117: Figure 5.5: Test setup. Initially,
- Page 118 and 119: H100 Specimen Fibre bridging Figure
- Page 120 and 121: propagation, the crack continues to
- Page 122 and 123: Figure 5.14: Kinking of the crack i
- Page 124 and 125: Crack length [mm] Crack length [mm]
- Page 126 and 127: mode-mixity phase angle was chosen
- Page 128 and 129: should be taken into account for a
- Page 130 and 131: Figure 5.25: Kinking of the crack i
- Page 132 and 133: log (da/dN) (mm/cycle) 10 log G (J/
- Page 134 and 135: erroneous extrapolations in the tra
- Page 136 and 137: compared to the 65% efficiency obta
- Page 138 and 139: the case of uneven debond growth, t
- Page 140 and 141: Load (kN) 2 1.5 1 0.5 0 Panel 1 Pan
- Page 142 and 143: Figure 5.42: Zero and ninety degree
- Page 144 and 145: G(J/m 2 ) 180 150 210 120 150 100 5
- Page 146 and 147: 110 q=qG=0.4 Test #1 100 Test #2 Te
- Page 148 and 149: panels were determined for differen
- Page 150 and 151: Chapter 6 Conclusion and Future Wor
- Page 152 and 153: toughness using MMB fracture toughn
- Page 154 and 155: For the specimens with H250 core th
- Page 156 and 157: Development of testing methods for
- Page 158 and 159: This page is intentionally left bla
- Page 162 and 163: Kanny K. and Mahfuz H. (2005), Flex
- Page 164 and 165: Ratcliffe J. and Cantwell W. J. (20
- Page 166 and 167: This page is intentionally left bla
- Page 168 and 169: Out-of-plane displacement (mm) 1 0.
- Page 170 and 171: Out-of-plane displacement (mm) 3 2
- Page 172 and 173: A.5 Out-of-plane deflection of Debo
- Page 174 and 175: (a) Figure A.14: Out-of-plane defle
- Page 176 and 177: (a) (b) Figure A.18: Out-of-plane d
- Page 178 and 179: Load (kN) 250 200 150 100 50 250 30
- Page 180 and 181: Displacement (mm) 4 3 2 1 0 8 9 (a)
- Page 182 and 183: (a) (b) Figure B.11: Out-of-plane d
- Page 184 and 185: (a) (b) Figure B.15: Out-of-plane d
- Page 188: DTU Mechanical Engineering Section
Bezazi A., Mahi A. E., Berthelot J. M. <strong>and</strong> Bezzazi B. (2009), Experimental Analysis <strong>of</strong><br />
Behavior <strong>and</strong> Damage <strong>of</strong> S<strong>and</strong>wich Composite Materials in Three-Point Bending Part 2: <strong>Fatigue</strong><br />
Test Results <strong>and</strong> Damage Mechanisms, <strong>Strength</strong> <strong>of</strong> Materials, 41(3): 257-267.<br />
Billardon R. (1989), Etude de la rupture par la mecanique de I’endommagement, These de<br />
Doctorat es Sciences, Universite Paris 6.<br />
Blasques, J. P., Stolpe, M. (2011), Multi-Material Topology Optimization <strong>of</strong> Laminated<br />
Composite Beam Cross Sections, International Journal for Numerical Methods in Engineering,<br />
(submitted).<br />
Boisse P., Bussy P. <strong>and</strong> Ladeveze P. (1990), A New Approach in Nonlinear <strong>Mechanics</strong> – the<br />
Large Time Increment Method, International Journal <strong>of</strong> Numerical Methods in Engineering, 29:<br />
647–663.<br />
Bozhevolnaya E., Jakobsen J. <strong>and</strong> Thomsen O. T. (2009), <strong>Fatigue</strong> Performance <strong>of</strong> S<strong>and</strong>wich<br />
Beams With Peel Stoppers, Strain, 45: 349–357.<br />
Burman M. <strong>and</strong> Zenkert D. (1997), <strong>Fatigue</strong> <strong>of</strong> Foam Core S<strong>and</strong>wich Beams, Part I: Undamaged<br />
Specimens, International Journal <strong>of</strong> <strong>Fatigue</strong>, 19: 551–561.<br />
Burman M. <strong>and</strong> Zenkert D. (1997), <strong>Fatigue</strong> <strong>of</strong> Foam Core S<strong>and</strong>wich Beams, Part II: Effect <strong>of</strong><br />
Initial Damages, International Journal <strong>of</strong> <strong>Fatigue</strong>, 19: 563–578.<br />
Burman M. <strong>and</strong> Zenkert D. (2000), <strong>Fatigue</strong> <strong>of</strong> Undamaged <strong>and</strong> Damaged Honeycomb S<strong>and</strong>wich<br />
Beams, Journal <strong>of</strong> S<strong>and</strong>wich Structures <strong>and</strong> Materials, 2: 50-74.<br />
Burman, M. (1998), <strong>Fatigue</strong> Crack Initiation <strong>and</strong> Propagation in S<strong>and</strong>wich Structures, Doctoral<br />
Thesis, Department <strong>of</strong> Aeronautics, Royal Institute <strong>of</strong> Technology.<br />
Cantwell W. J. <strong>and</strong> Davies P. (1994), A Test Technique for Assessing Core-Skin Adhesion in<br />
Composite S<strong>and</strong>wich Structures, Journal <strong>of</strong> Material Science Letters, 13: 203–205.<br />
Cantwell W. J. <strong>and</strong> Davies P. (1996), A Study <strong>of</strong> Skin-Core Adhesion in Composite S<strong>and</strong>wich<br />
Materials, Advanced Composite Materials, 3: 407-420.<br />
Cantwell W. J., Scudamore R., Ratcliffe J. <strong>and</strong> Davies P. (1999), Interfacial Fracture in<br />
S<strong>and</strong>wich Laminates, Composites Science <strong>and</strong> Technology, 59: 2079–2085.<br />
Carlsson L. A, Sendlein L. S, <strong>and</strong> Merry S. L. (1991), Characterization <strong>of</strong> Face/Core Shear<br />
Fracture <strong>of</strong> Composite S<strong>and</strong>wich Beams, Journal <strong>of</strong> Composite Materials, 25(1):101–16.<br />
Chen H. <strong>and</strong> Bai, R. (2002), Postbuckling Behavior <strong>of</strong> Face/Core Debonded Composite<br />
S<strong>and</strong>wich Plate Considering Matrix Crack <strong>and</strong> Contact Effect, Composite structures, 57: 305-<br />
313.<br />
138
Change language