Evaluation of Plastic Waste Management in Thailand Using Material ...

More documents

Recommendations

Info

Department of Industrial Works. (2013). Industrial Waste Management: Plastic Industry in 2006-2012. (Document, Industrial Waste Management Bureau, 2013). Bangkok: Industrial Waste Management Bureau. Dev, S. B. (2007). Application of 3R principles to solid waste management on the Asian Institute of Technology (AIT) campus. (Masters Thesis No. EV-07-46, Asian Institute of Technology, 2007). Bangkok: Asian Institute of Technology. DPTECHECOLE. (2013). Plastic Production Process: Rotational Molding. Retrieved March 9, 2013, from: http://dptechecole.wikispaces.com/Moulding+i.e+sprue,+ flash,+parison,+die,+draft,+angle+and+injection+moulding+e.g+blow+moulding,+ vaccum+forming Environment Protection Agency. (EPA). (2013a). Solid Waste Management Hierarchy. Retrieved February 20, 2013, from: http://www.epa.gov/osw/nonhaz/ municipal/hierarchy.htm Environment Protection Agency. (EPA). (2013b). Transfer Stations. Retrieved February 20, 2013, from: http://www.epa.gov/osw/nonhaz/municipal/transfer.htm Environment Protection Agency. (EPA). (2013c). Combustion. Retrieved February 20, 2013, from: http://www.epa.gov/osw/nonhaz/municipal/combustion.htm Environmental Protection Department. (EDP). (2012). Recovery and Recycling of Plastic Waste in Hong Kong. Retrieved February 20, 2013, from: http://www.a-tech.hk/ greenplastic/Info/Recycle_of_Plastics_in_HK.pdf Fiscal Policy Research Institute Foundation. (FPRI). (2011). The Draft of Environmental Taxation. Retrieved January 18, 2013, from: http://www.fti.or.th/2011/ download/file/IEI/seminar2012/18OCT/01PackageTax.pdf Foppes, N. (2000). Wongpanit: a successful waste recycling business in Phitsanulok, Thailand. Retrieved February 20, 2013, from: http://ns.ist.cmu.ac.th/riseat/ documents/wongpan.pdf GEOCYCLE. (2011). Waste Management of Siam City Cement Public Company Limited. Retrieved February 18, 2013, from: http://infofile.pcd.go.th/waste/23Jul2011 _waste_11.pdf?CFID=12325751&CFTOKEN=44479940 Goodship, V. (2007). Introduction to plastics recycling. Smithers Rapra Technology. ISBN: 978-1-84735-078-7 Green World Foundation. (GWF). (2013). Interest Statistic: Waste from Plastic Bags. Retrieved January 23, 2013, from: http://www.greenworld.or.th/relax/ statistic/about-en?page=2 Jantanaroch. S. (2010). The SCOR Model Application to Performance Evaluation of Plastic Recycle Manufacturing: Case Study of Plastic Recycle Manufacturing. Retrieved January 20, 2013, from: http://www.utcc.ac.th/public_content/ files/001/30_4-5.pdf 101
Jinran, Z. (2011). Ban on free plastic bags paying off. Retrieved February 14, 2013, from: www.chinadaily.com.cn/china/2011-05/28/content_12597526.htm Kittikanya, C. (2001, December 6). Empire Built from Junk. Bangkok Post. Thailand. Kojima, M., and Rebullida, M. L. G. (2008). Stakeholders’ relationships in recycling systems: Experiences in the Philippines and Japan. Promoting 3Rs in Developing Countries: Lessons from the Japanese Experience, 80-106. Ministry of Natural, Resources and Environment (MNRE). (2013). The Environmental Management Plant in 2012-2016. Retrieved March 12, 2013, from: http://www.onep.go.th/oneb/appimages/download/100.pdf Mutha, N. H., Patel, M. and Premnath, V. (2006). Plastic materials flows analysis for India. Resources, Conservation & Recycling, 47, 222-244. National Innovation Agency. (NIA). (2008). National Roadmap for the Development of Bioplastics Industry (2008 – 2012). Retrieved March 8, 2013, from: http://www.nia.or.th/bioplastics/download/bioplast_roadmap_en.pdf NatureWorks LLC. (2013). Plastic Coding Guidelines in the United States. Retrieved January 13, 2013, from: http://www.natureworksllc.com/~/media/ The_Ingeo_Journey/EndofLife_Options/plastic_codes/2008_04_10_plastic_code_g uidelines_pdf.pdf Newth design. (2013). Plastic Production Process: Compressed Molding. Retrieved March 9, 2013, from: http://newthdesign.blogspot.com/2011/09/compression- moulding.html Nithikul, J. (2007). Potential derived fuel production from Bangkok municipal solid waste. (Masters Thesis No. EV-07-60, Asian Institute of Technology, 2007). Bangkok: Asian Institute of Technology. Office of Industrial Economics. (OIE). (2010). Annual Report 2010. Retrieved January 20, 2013, from: http://www.oie.go.th/sites/default/files/attachments/publications/ OIE-AnnualReport2553.pdf Office of Industrial Economics. (OIE). (2011). Annual Report 2011. Retrieved January 20, 2013, from: http://www.oie.go.th/sites/default/files/attachments/publications/ OIE-AnnualReport2554.pdf On Projects. (2013). On Identifying Your Stakeholders. Retrieved January 15, 2013, from: http://onprojects.net/2007/12/12/identifying-stakeholder-analysis- management Pattaya Today. (2013). BMA starts ‘No bag, no baht’ scheme Saturday. Retrieved April 12, 2013, from: http://pattaya-today.com/news/thailand-news/bma- starts-no-bag-no-baht-scheme-Saturday 102
Page 1 and 2:
Evaluation of Plastic Waste Managem
Page 3 and 4:
Abstract Rapid increase in the usag
Page 5 and 6:
List of Tables Table Title Page 2.1
Page 7 and 8:
4.7 Percentage of municipal solid w
Page 9 and 10:
PETE Polyethylene Terephthalate PIT
Page 11 and 12:
Plastic wastes are mostly recycled
Page 13 and 14:
4R principle includes recovery, rec
Page 15 and 16:
Table 2.2 Codes, characteristics of
Page 17 and 18:
2. Injection molding: First, the pl
Page 19 and 20:
Vacuum forming: A vacuum is formed
Page 21 and 22:
2.2.3 Uses of plastic Figure 2.11 C
Page 23 and 24:
5. Housewares: This kind of product
Page 25 and 26:
process usually involves two steps,
Page 27 and 28:
Refuse Derived Fuel in Thailand The
Page 29 and 30:
product from gas into liquid. The p
Page 31 and 32:
Figure 2.24 Coke oven chemical feed
Page 33 and 34:
2.3.3.2 Re-melted to make products
Page 35 and 36:
3. Chapter 7 on penalties It should
Page 37 and 38:
Adjust system Problem Definition Sy
Page 39 and 40:
There are 0.25 million workers in r
Page 41 and 42:
2. Collecting and recording the inf
Page 43 and 44:
For example, if the stakeholder has
Page 45 and 46:
(DENR). A pilot collection program
Page 47 and 48:
3.2 Study Area Seven provinces name
Page 49 and 50:
3.3 Sample Size The sample groups w
Page 51 and 52:
Figure 3.4 Initial flow of plastic
Page 53 and 54:
Table 3.1 Details of Needed Informa
Page 55 and 56:
questionnaires, interview, field ob
Page 57 and 58:
From Table 3.2, the stakeholders we
Page 59 and 60: Institute Foundation (FPRI) made a
Page 61 and 62: 12%, 10%, and 7% respectively. The
Page 63 and 64: From Figure 4.5, this figure shows
Page 65 and 66: Plastic 17% Paper 8% Metal 2% Glass
Page 67 and 68: Figure 4.9 BMA waste collectors Fig
Page 69 and 70: Similarly, some recycling factories
Page 71 and 72: Figure 4.21 Material flow of plasti
Page 73 and 74: 50% of agricultural products was co
Page 75 and 76: Figure 4.25 Recycling and plastic t
Page 77 and 78: From Figure 4.26, the material flow
Page 79 and 80: future is the same as current situa
Page 81 and 82: From Figure 4.28, total plastic pel
Page 83 and 84: The one issue of plastic waste segr
Page 89 and 90: Most municipal plastic wastes (37%)
Page 91 and 92: From Figure 4.33, the revenue from
Page 93 and 94: sectors by the government organizat
Page 95 and 96: industrial waste incineration of ea
Page 97 and 98: 4.4.1. Lists of stakeholders and th
Page 99 and 100: of them. For example, one individua
Page 101 and 102: Local administrative bodies are als
Page 103 and 104: was presented, and the percentage o
Page 105 and 106: 5.1 Conclusions Chapter 5 Conclusio
Page 107 and 108: 11. A simple revenue-expenditure an
Page 109: References BBC News. (2008). Plasti
Page 113 and 114: Plastic Waste Management Institute.
Page 115 and 116: Treewijitkasam, P. (2013). Understa
Page 117 and 118: Table A-1 Details of parameters and
Page 125 and 126: A-2: Harmonized System Code Table A
Page 127 and 128: Table A-11 Characteristics of stake
Page 135 and 136: - What is the knowledge that the wa
Page 137 and 138: 2.5 Who do you buy plastic wastes f
Page 139 and 140: 4. Environmental, law, policy, and
Page 141 and 142: B.3 Questionnaire for Household Dat
Page 143 and 144: B.4 Questionnaire for Plastic Recyc
Page 145 and 146: 3. Production process information a
Page 147 and 148: B.5 Questionnaire for Waste picker/
Page 149 and 150: B.6 Checklists for waste collector
Page 151 and 152: 2.8 Which kinds of plastic products
Page 153 and 154: This shop does not buy foam, plasti
Page 155 and 156: (a) Non-stored bottles 146 (b) Undi
Page 157 and 158: c) Plastic pellet sack Figure C-6 S
Page 159 and 160: matters/dust. This shop is a stable
Page 161 and 162:
Washing and drying process are oper
Page 163 and 164:
C.2 Case study from oil recovery pl
Page 165 and 166:
silicate clay, natural clay, metal-
Page 167 and 168:
Residue wastes are produced about 1
Page 169 and 170:
C.3 Case study from zero baht shop
Page 171 and 172:
Figure C-24 Newspaper Figure C-26 M
Page 173 and 174:
3. Activities of Zero Baht Shop On
Page 175 and 176:
Zero Baht Shop depending on the tot
Page 177 and 178:
Figure C-37 Lecturer of the project
Page 179 and 180:
networks. This project is not widel
Page 181 and 182:
C.4 Case study from Sai Mai transfe
Page 183 and 184:
4. Categorizing of waste Waste from
Page 185 and 186:
6. Environment issues and observati
Page 187 and 188:
C.5 Technology Park of Chulalongkor
Page 189 and 190:
fractions. It utilizes the heat fro
Page 191 and 192:
ates and desorption inside capillar
Page 193 and 194:
Appendix D Material Flow Analysis D
Page 195 and 196:
Table D-1 Amounts of plastic waste
Page 197 and 198:
D.2 Calculation of the material flo
Page 199 and 200:
Table D-2 Details of calculation of
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Table D-3 Percentage of industrial
Page 217 and 218:
E.3 Calculation of plastic flows in
Page 219 and 220:
Table E-3 Details of each flow of s
Page 221 and 222:
Page 223 and 224:
E.4 The estimation of imported and
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
show all

Evaluation of Plastic Waste Management in Thailand Using Material ...

Create successful ePaper yourself

Delete template?

Save as template?