Ethernet Configuration and Control, cont'd - Extron Electronics

More documents

Recommendations

Info

PRELIMINARY SIS Programming and Control, cont’d 5-6 X35 = Event number: range = 0–99 (Max.) X36 = Event buffer: 0 = receive 1 = user (absolute) 2 = user (relative) 3 = NVRAM X37 = Memory location: range = 0–MaxBufferSize X38 = Event data size: b = bit B = byte (8 bit) S = short (16 bit) L = long (32 bit) This parameter is case sensitive. X39 = Event data to write X41 = Reading password. An RS-232 connection responds with the password. An IP connection responds with four asterisks (****) , if a password exists, or an empty space if no password exists. X42 = Contact input setting 0 = off (open) 1 = on (shorted) X44 = Number of bytes to read: Range = 1–127 (Max) X45 = E-mail event number (1 - 64). The response is two digits with a leading zero. X46 = E-mail recipient’s address (e.g., JDoe@extron.com) for the person to whom messages will be sent. X47 = For CR command: Name (numeral) of e-mail file to be sent. The first line of the file is the subject; the rest is the message body. For SM command: Numeric name for the e-mail file to be sent. The file must be named xx.eml (xx can be 1-999). Examples: 1.eml, 2.eml, ... 999.eml. This command overrides the file specified in the CR command. If the value = 0 or a parameter is missing, the file specified for the mailbox in the CR command is sent instead. The SM command sends a default e-mail message if file X47 is not found. X49 = Default name: a combination of the model name and the last 3 pairs of the interface’s MAC address (e.g., IPL-T-PC1-00-02-3D). X52 = Connection’s security level 11= user 12 = administrator The response is returned as two digits with leading zeros. X54 = ASCII digit(s) representing numeric value of data element read from event buffer. (Leading zeros are suppressed.) X57 = IR file number: 0-99. The response is returned with leading zeros. IPL T PC1 SIS Programming and Control X58 = IR function number: 0 = return all data 1-127 = functions that can be played or can return information (text). The response is returned with leading zeros. 129 = manufacturer 130 = model 131 = class 132 = remote 133 = creation date 134 = comments 137 = user file name (descriptive name given to the file by the user) 0 and numbers greater than 127 can return information only. X59 = IR playback mode 0 = play once 1 = play continuously Response is returned with leading zeros. To stop mode 1 playback, send the IR command again with mode 0 selected. X64 = Time in seconds to keep sending the broadcast message (0–255, default 10) X69 = (Ethernet only) Number of seconds before timeout on IP connections (min = 1, max = 65,000; and default = 30 = 300 seconds). If no data is received during the timeout period, the Ethernet connection is closed. Each step is 10 seconds. The response is returned with leading zeros. With an RS-232 connection, only the global timeout commands apply (commands to view or set the current timeout cause an E13 message to be returned). X70 = The number (as an optional parameter) that is inserted into the e-mail message if the .eml file has an embedded server side include (SSI) ( Esc command with no parameters). X71 = Max = 65,535. Hardware (MAC) address: the four most significant Hex nibbles converted into a single 16-bit decimal number. X72 = Hardware (MAC) address: the eight least significant Hex nibbles converted into single 32-bit decimal number. This could be as large as 10 digits. X73 = E-mail account user name. Maximum length is 31 characters. This parameter is optional; commas cannot be used as placeholders for it. If it is omitted from an issued command, any existing user account name is cleared. X74 = E-mail account password. Maximum length is 31 characters. This parameter is optional; commas cannot be used as placeholders for it. If it is omitted from an issued command, any existing e-mail account password is cleared. X711 = Day of the week: 1 = Sunday 2 = Monday 3 = Tuesday 4 = Wednesday 5 = Thursday 6 = Friday 7 = Saturday
X712 = Time in minutes (0-1440) 0 = 12.00 a.m. (midnight) 1440 = Clear schedule Example: 1439 = 11:59 p.m. X713 = Power receptacle name (12 characters maximum) IPL T PC1 SIS Programming and Control 5-7 PRELIMINARY
Page 1 and 2:
IP Link Power Control Interface IPL
Page 3 and 4:
FCC Class A Notice This equipment h
Page 5 and 6:
Table of Contents Chapter 1 Introdu
Page 7 and 8:
Using the Command/Response Table ..
Page 9 and 10:
IPL T PC1 1 Chapter One Introductio
Page 11 and 12:
Web-based A/V asset management —
Page 13 and 14: IPL T PC1 2 Chapter Two Installatio
Page 15 and 16: Reduced air flow — Installation o
Page 17 and 18: 3 COM port (RS-232) — Connect the
Page 19 and 20: Side View Pins: 12345678 Insert Twi
Page 21 and 22: IPL T PC1 3 Chapter Three Front Pan
Page 23 and 24: Setting Up the System Using the Fro
Page 25 and 26: Result — The RS-232 port is conve
Page 27 and 28: IPL T PC1 4 Chapter Four Ethernet C
Page 29 and 30: ARP-S command screen 6. Execute a p
Page 31 and 32: 2. Right-click Local Area Connectio
Page 33 and 34: 7. Set up the PC1’s IP address. S
Page 35 and 36: Passwords must contain 4 to 12 alph
Page 37 and 38: 2. Enter your new information in th
Page 39 and 40: RS-232 port From the drop-boxes in
Page 41 and 42: 3. In the Re-enter Admin Password f
Page 43 and 44: 4. Click Save to save the informati
Page 45 and 46: 2. Click Browse to open a Choose fi
Page 47 and 48: “Set Schedule For” field, displ
Page 49 and 50: 2. In either the Power ON or Power
Page 51 and 52: Adding a directory To add a directo
Page 53 and 54: The figure below shows the HTML cod
Page 55 and 56: Accessing and Using Telnet (Port 23
Page 57 and 58: Network connections 1. Check the ne
Page 59 and 60: IPL T PC1 5 Chapter Five SIS Progr
Page 61 and 62: The error response codes and their
Page 63: Symbol definitions = CR/LF (carriag
Page 67 and 68: Command/response table for SIS comm
Page 75 and 76: IPL T PC1 Appendix A Reference Mate
Page 77 and 78: General Power input ...............
Page 79 and 80: Glossary 10/100Base-T is Ethernet t
Page 81 and 82: IP address is a unique, 32-bit, bin
Page 83 and 84: Extron’s Warranty Extron Electron
show all

Ethernet Configuration and Control, cont'd - Extron Electronics

Create successful ePaper yourself

Delete template?

Save as template?