ECOR264- DVR manual-4605XCOR04004AR - Everfocus

More documents

Recommendations

Info

4.11 INFORMATION Figure 4.42 is a screenshot of the INFORMATION MENU. This menu displays important (read only) system information. 4.11.1 System System Version: Displays firmware version number. Model: Displays DVR model number. Figure 4-42 Information Menu – System NTSC/PAL: Displays current video format selected based video format on Camera 1 input at boot up. Network IP: Displays the DVR’s current IP Address as set in the Network or Express Setup screen. MAC: Unique address of the DVR’s internal network card. This option cannot be changed. DVR Name: Displays DVR DDNS name if configured. Network ID: The ID number for the PowerCon alarm network as set in the Alarm Server screen. Status Disk: Displays status of the installed disk(s); normal disk operation is indicated by “OK”. Fans: Displays fan status; normal fan operation is indicated by “OK”. 98
4.11.2 Log Figure 4-43 Information Menu – Log This screen is used to choose, display and/or export log entries. From Date: Select starting date of log to be displayed. Time: Select starting time of log to be displayed. To Date: Select end date of log to be displayed. Time: Select end time of log to be displayed. Log Type: Configurations: to see log entries related to configuration changes. Event: to see log entries related to events. Record: to see log entries related to recording changes. Operation: to see log entries related to operation changes. User: to see log entries related to user access. View Log: Press “View Log” button to view the log. See Figure 4-44 for more detail. Clear Log: Press “Clear Log” button to clear the log. 99
Page 1 and 2:
User Manual ECOR264-4X1 DVR ECOR264
Page 3 and 4:
Safety Precautions Refer all work
Page 5 and 6:
WEEE This Product is RoHS compliant
Page 7 and 8:
3.6 PTZ ...........................
Page 9 and 10:
1 PRODUCT OVERVIEW This new EverFoc
Page 11 and 12:
1.3 SPECIFICATIONS 3 ECOR264X1 Chan
Page 13 and 14:
1.4 FRONT PANEL Your primary intera
Page 15 and 16:
1.5 REAR PANEL During initial setup
Page 17 and 18:
1.6 VIDEO INPUTS/OUTPUTS INSTALLATI
Page 19 and 20:
RS-485 bus serial wiring with conne
Page 21 and 22:
ATTENTION: Some Pelco-D / -P protoc
Page 23 and 24:
2 MOUSE AND FRONT PANEL OPERATION E
Page 25 and 26:
Button: Click the button to execute
Page 27 and 28:
2 Figure 2-3 OSD Menu 1. In section
Page 29 and 30:
3. GENERAL DVR OPERATIONS This chap
Page 31 and 32:
3.5 PLAYBACK The playback bar is th
Page 33 and 34:
10. Pattern Operation (Pattern is t
Page 35 and 36:
3.7 LAYOUT The ECOR264 DVR has seve
Page 37 and 38:
3. Right-click to bring up the menu
Page 39 and 40:
3.12.2 Event Search From: Select st
Page 41 and 42:
Camera: Select which cameras to rev
Page 43 and 44:
3.12.4 Snapshot Search Snapshot Sea
Page 45 and 46:
3.13 COPY To bring up Copy menu: By
Page 47 and 48:
4 DVR CONFIGURATION This chapter wi
Page 49 and 50:
Network Type: Static IP: User sets
Page 51 and 52:
Covert: Check the box to hide the c
Page 53 and 54:
4.3.2 Video Adjust Figure 4-3 Camer
Page 55 and 56: Network Alarm: Check this box to se
Page 57 and 58: 4.3.4 Video Loss Figure 4-6 Camera
Page 59 and 60: 4.4.1 Record Record Overwrite: Chec
Page 61 and 62: 4.4.3 Play Figure 4-9 Record & Play
Page 63: Record: Select which camera(s) will
Page 66 and 67: Fan Failure: Figure 4-12 Alarm & Ev
Page 68 and 69: HD Failure: Log: Check box to recor
Page 70 and 71: HD Off: Figure 4-16 Alarm & Event M
Page 72 and 73: Record Stop: Log: Check box to reco
Page 74 and 75: 4.6 SCHEDULE SETTING Figure 4-20 is
Page 76 and 77: One time: This entry is used only o
Page 78 and 79: 3. Selecting camera: Use Right/Left
Page 80 and 81: Resolution: Select recording resolu
Page 82 and 83: 4.6.4 Alarm Action Figure 4-24 Sche
Page 84 and 85: 6. Editing blocks in a time bar: wh
Page 86 and 87: 4.7 NETWORK SETTING Figure 4-25 is
Page 88 and 89: • Well Known Ports 0 thru 1023
Page 90 and 91: The DDNS name you choose must be un
Page 92 and 93: 4.8 DISK INFORMATION 4-30 is a scre
Page 94 and 95: 4.9 DISPLAY SETTING Figure 4-32 is
Page 96 and 97: 4.9.2 Main M/T SEQ Step: Sequence o
Page 98 and 99: 4.10 SYSTEM SETTING Figure 4-35 is
Page 100 and 101: 4.10.3 User User Menu is where you
Page 102 and 103: There are three system access level
Page 104 and 105: Baud Rate: The speed used to transm
Page 108 and 109: Export Log to USB: Press “Export
Page 110 and 111: 5.4 Virtual Ports A port number rep
Page 112 and 113: 2. Direct High Speed Modem Connecti
Page 114 and 115: 106
Page 116 and 117: Click on the option that says “Us
Page 118 and 119: Log into the EverFocus DVR menu and
Page 120 and 121: Once you have a straight through ca
Page 122 and 123: 6 REMOTE OPERATION FROM BROWSER 6.1
Page 124 and 125: Install the ePlusDVR.cab file when
Page 126 and 127: 6.2.2 Enabling ActiveX Controls Not
Page 128 and 129: Close the window so you are back at
Page 130 and 131: Schedule Setup Network Setup Hard D
Page 132 and 133: 7 EVERFOCUS DDNS SETUP Setup Steps:
Page 134 and 135: 8 LINKSYS & D-LINK PORT FORWARDING
Page 136 and 137: 8.3 TYPICAL D-LINK PORT FORWARDING
Page 138 and 139: Here is an example of the informati
Page 140 and 141: Make sure you are using the correct
Page 142 and 143: Timeout Mode Input Event Alarm Dura
Page 144 and 145: APPENDIX B: EXPRESS SETUP RECORDING
Page 146 and 147: APPENDIX C: REMOTE CONTROL The IR r
show all

ECOR264- DVR manual-4605XCOR04004AR - Everfocus

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?